Sen Posted June 5, 2014 Share Posted June 5, 2014 I think I shall try yours tomorrow. Can I check with you for the clover boot loader what customization should I choose according to my specs in which I have attached earlier on? Because i have no idea which to select! Thank you very much Link to comment Share on other sites More sharing options...
eurisko1 Posted June 5, 2014 Share Posted June 5, 2014 Thanks for the guíde. Works very fine. Link to comment Share on other sites More sharing options...
fusion71au Posted June 6, 2014 Share Posted June 6, 2014 OS X 10.10 Yosemite (DP1) Installation Guide 1. Requirements a. Clover Bootloader b. An 8GB or bigger USB drive c. Access to a Mac, preferably your current Hackintosh d. (Optional) A separate partition to install the DP on, as it is not recommended to install this as you daily driver. . . . . fsck -fy mount -uw / kextcache -m /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext /System/Library/Extensions cd /System/Library/Extensions chmod -R 755 FakeSMC.kext chown -R root:wheel FakeSMC.kext kextload -v FakeSMC.kext No longer any need for single user mode (steps 8-16). Clover Version 2695+ uploaded by Slice in this post can now inject kexts properly in OSX 10.10. So... Install Clover into the EFI partition of a GUID partitioned USB drive with the correct EFI drivers. Add the argument kext-dev-mode=1 to Clover's config.plist to allow unsigned hackintosh kexts: <key>Arguments</key> <string>kext-dev-mode=1</string> Place FakeSMC.kext & other necessary kexts (eg network kexts, VoodooPS2, NullCPUPowermanagement) in EFI/Clover/Kexts/Other or 10.10 Boot your machine into the installer with injected kexts and follow the prompts etc. 1 Link to comment Share on other sites More sharing options...
ikingblack Posted June 6, 2014 Author Share Posted June 6, 2014 No longer any need for single user mode. Clover Version 2695+ uploaded by Slice in this post can now inject kexts properly in OSX 10.10. Just boot with the argument kext-dev-mode=1 in your config.plist to allow unsigned hackintosh kexts: <key>Arguments</key> <string>kext-dev-mode=1</string> and place FakeSMC.kext in EFI/Clover/Kexts/Other or 10.10. Thanks, will update the guide. Question, would it still allow injection of 3rd-party kexts in /S/L/E? or do they have to be in Clover's EFI folder? Link to comment Share on other sites More sharing options...
hugo555 Posted June 6, 2014 Share Posted June 6, 2014 im getting this error after install "Missing Bluetooth Controller Transport!" any way to get pass this " looks like FakeSMC is not being loaded" comes back with can't load kext authentication problems Hi Coder, how did you solve this problem, cause i'm having the same problem. Link to comment Share on other sites More sharing options...
Li Tan Posted June 6, 2014 Share Posted June 6, 2014 I am keep getting this error screen... I used kext-dev-mode=1 kext-dev-mode=1 -v kext-dev-mode=1 -v GraphicsEnabler=No kext-dev-mode=1 -v -x -s (None of them are working with 10.10) Link to comment Share on other sites More sharing options...
furiousbuilder Posted June 6, 2014 Share Posted June 6, 2014 Hi I used this guide, but I'm getting this : AppleUSBEHCI :: Found a transaction which hasn't moved for 5000ms The IOUSBFamily is having trouble enumerating a USB device that has been plugged un. It will keep retrying. (Port 2 of Hub 0x1d100000) Still Waiting For Root Device I have the lastest Clover (2695) on a HP G5429fr. All works fine with OSX Mavericks 10.9.4 with boot flags GraphicsEnabler=No Thanks for your help Link to comment Share on other sites More sharing options...
ikingblack Posted June 6, 2014 Author Share Posted June 6, 2014 Hi I used this guide, but I'm getting this : AppleUSBEHCI :: Found a transaction which hasn't moved for 5000ms The IOUSBFamily is having trouble enumerating a USB device that has been plugged un. It will keep retrying. (Port 2 of Hub 0x1d100000) Still Waiting For Root Device I have the lastest Clover (2695) on a HP G5429fr. All works fine with OSX Mavericks 10.9.4 with boot flags GraphicsEnabler=No Thanks for your help I had the same error on my system a few days ago in Mavericks - turned out I had a corrupt hard drive. I don't know if that's your issue, but try re-formatting the installer. Link to comment Share on other sites More sharing options...
furiousbuilder Posted June 6, 2014 Share Posted June 6, 2014 Okay thanks I'll try to redo my installation key EDIT :Okay so I made another Installer. Now, Sensors seems work (I've messages in verbose boot for CPU Sensors and Radeonsensors.)I tried kext-dev-mode=1 -v and I've that : Then with kext-dev-mode=1 -v GraphicsEnabler=No ncpi=0x2000 USBBusFix=1 I got this : Any idea ?Thanks a lot Link to comment Share on other sites More sharing options...
Alex Mac Posted June 6, 2014 Share Posted June 6, 2014 I used VoodooHD for 889, it seems to be a universal solution. and does this work for sound on a ga-z77x-ud5h ?? Link to comment Share on other sites More sharing options...
anzharhendra Posted June 6, 2014 Share Posted June 6, 2014 i'm getting the Kernel Panic.. "Unable to find driver for this platform: ACPI bla..bla..", anyone how to fix this in yosemite? solved by myself. just boot Clover2695 + bootefi2696, highlight my OSXBaseSystem, hit the spacebar, choose “with injected text” try this : http://www.insanelymac.com/forum/topic/298521-easy-yosemite-1010-usb-installer/ but im doin some modification.. works good. ()/ Link to comment Share on other sites More sharing options...
crusher Posted June 6, 2014 Share Posted June 6, 2014 Yes this Guid is is the best. Link to comment Share on other sites More sharing options...
warraisraw Posted June 6, 2014 Share Posted June 6, 2014 Anyhelp please!! I get this after write flag info clover Hi, I had the same issue after the installation and I've resolved replacing AppleACPIPlatform.kext, using the same kext from USB installer. Start the installer and once on installation menu open a terminal window, then remove kext from S/L/E on your HD (rm -R Volumes/'your hd name'/S/L/E/AppleACPIPlatform.kext) and copy the kext from USB (cp -R S/L/E/AppleACPIPlatform.kext /Volumes/'your hd name'/S/L/E/). Reboot and should start the post installation dialog. Regards. Link to comment Share on other sites More sharing options...
bogetlol Posted June 7, 2014 Share Posted June 7, 2014 Thanks for the guide! Does anyone have the checksum for the legitimate "Install Yosemite 10.10.app" file (or its DMG container) as downloaded through the Apple Developer Center? This would be useful addition to the guide, for those of us who downloaded the installer from other sources. Link to comment Share on other sites More sharing options...
iFIRE Posted June 7, 2014 Share Posted June 7, 2014 Build 14A238x (SHA1 396995fad209e1fbcd9decd2716b1271b605ed05) Link to comment Share on other sites More sharing options...
furiousbuilder Posted June 7, 2014 Share Posted June 7, 2014 All is working fine !! THANKS A LOT I used Clover 2696, and I booted with these arguments : "kext-dev-mode=1 -v GraphicsEnabler=No ncpi=0x2000 USBBusFix=1 EthernetBuiltIn=Yes". My computer is a HP G5429fr with Foxconn Cupertino motherboard, Intel Core i5 2400S, 4Go RAM DDR3, AMD Radeon HD 6450, ALC656, RTL8171E.Only my RT2870 (USB dongle for WiFi) isn't working because kexts are not released yet for 10.10. Link to comment Share on other sites More sharing options...
iFIRE Posted June 7, 2014 Share Posted June 7, 2014 RT2870 working to me, but in SLE, Clover not inject this kext Link to comment Share on other sites More sharing options...
furiousbuilder Posted June 7, 2014 Share Posted June 7, 2014 How do you make it work ? I tried official drivers (on Mediatek Website), but RalinkWirelessUtility doesn't open, same thing for bear extender, and the Ralink Airport-like app say "No card detected" :/Sorry for my english Link to comment Share on other sites More sharing options...
iFIRE Posted June 7, 2014 Share Posted June 7, 2014 install the kext with Kext Utility to SLE then reboot Ralink.zip 1 Link to comment Share on other sites More sharing options...
furiousbuilder Posted June 7, 2014 Share Posted June 7, 2014 Thanks, I'll be able to use my dongle directly with Settings app or I still need another app ? Link to comment Share on other sites More sharing options...
iFIRE Posted June 7, 2014 Share Posted June 7, 2014 kext + app from the folder= wifi working Link to comment Share on other sites More sharing options...
furiousbuilder Posted June 7, 2014 Share Posted June 7, 2014 Thanks a lot, I'll try It works well, thanks ! Link to comment Share on other sites More sharing options...
schnuddelbuddel44 Posted June 7, 2014 Share Posted June 7, 2014 Hi, i Need a Little bit help. I have sucsessefull install Yosemite to my HDD. But if I reboot from this HDD with"-x kext-dev-mode=1 GraphicsEnabler=No PCIRootUID=1 npci=0x2000" I get this kernel panic I have do all thinks i found in this Forum, FakeSMC are in the rigth Folder with the rigth permissions and i have changed the AppleACPIPlatform.kext with this one from the Tumbdrive. Dos enyone have a Idee? The System runs well with Mavericks! My System I3 3225 ASUS P8Z68-V LX regards Link to comment Share on other sites More sharing options...
furiousbuilder Posted June 7, 2014 Share Posted June 7, 2014 Have you Clover 2696 ? With the 2695 I got Kernel Panic, but all is working fine with the 2696 Link to comment Share on other sites More sharing options...
iFIRE Posted June 7, 2014 Share Posted June 7, 2014 fakeSMC.kext not load or a bad config in the config.plist, if you using clover try with injectedkexts Link to comment Share on other sites More sharing options...
Recommended Posts