Mr_Pie_Guy1234 Posted June 5, 2014 Share Posted June 5, 2014 Anybody have any idea if there is a way to get ALC898 audio working in Yosemite? Link to comment Share on other sites More sharing options...
ADHDMedia Posted June 5, 2014 Share Posted June 5, 2014 The MACH error seems to be CPU-related. Are you install on your AMD systems or the Intel one? Intel. Not even gonna bother on AMD lol I've fixed things to the point now where I'm almost certain my boot is broken because of the NVDA kexts. I'm hanging where I should see GUI. Still able to type into the command line as well but no actions. I'm gonna remove kexts and see if I can boot in. Then I just need to figure out how to get my GTX 650 working. Link to comment Share on other sites More sharing options...
VultUx Posted June 5, 2014 Share Posted June 5, 2014 Thank you! The first guide that works for me. Link to comment Share on other sites More sharing options...
ADHDMedia Posted June 5, 2014 Share Posted June 5, 2014 I'm done. This is {censored}in ridiculous lol this is why I switch to Intel, in order to avoid these headaches. Have fun fellas, back to Mavs for me. Link to comment Share on other sites More sharing options...
theconnactic Posted June 5, 2014 Share Posted June 5, 2014 The issue seems to be related to improper Clover settings, ADHD: when I boot from my main HDD and select Yosemite from the menu, it works. When I boot directly from the Yosemite HDD, it crashes. The difference? The Clover settings in my main HDD are already fine tuned for my HW, including things like a DSDT.aml in the EFI/Clover/ACPI folder. I'm sure if I copy the entire EFI folder to the Yosemite's EFI partition, it will work as well, but as I said in the other topic, I didn't bother yet. My advice is you take time getting familiar with Clover. or else, wait for a Chameleon solution. All the best! Link to comment Share on other sites More sharing options...
ikingblack Posted June 5, 2014 Author Share Posted June 5, 2014 Anybody have any idea if there is a way to get ALC898 audio working in Yosemite? I used VoodooHD for 889, it seems to be a universal solution. Link to comment Share on other sites More sharing options...
ADHDMedia Posted June 5, 2014 Share Posted June 5, 2014 My feelings exactly. I've never used Clover before. I tried to install it to the partition that I installed Yosemite too, but it gives me a "boot1" error. I have my DSDT.aml inside of the ACPI folder on my USB installer with Clover on it, does that get read when I boot the OS on a different HDD? Or does it still read what's on the USB when booting another HDD? Link to comment Share on other sites More sharing options...
Guest wader1111 Posted June 5, 2014 Share Posted June 5, 2014 ADHDMedia: I think you and I have the same issue... Makes sense I have a GT 630. I'm about to go to my friends tonight who has a computer that runs Mavericks without any boot arguments all plug and play. He has a Radeon 7750. I'll try installing it on his and see if it gets to the install screen or not. Link to comment Share on other sites More sharing options...
ADHDMedia Posted June 5, 2014 Share Posted June 5, 2014 See that's why this is so frustrating... I run Mavs completely vanilla on my system. The only extra kext I have installed is for USB 3.0. My graphics work out the box. I just don't understand this!!! LOL Sorry for venting here guys. @connatic - you've always been there with advice man, remember me on the AMD thread?? I appreciate your help man. And everyone's for that matter. ADHDMedia: I think you and I have the same issue... Makes sense I have a GT 630. I'm about to go to my friends tonight who has a computer that runs Mavericks without any boot arguments all plug and play. He has a Radeon 7750. I'll try installing it on his and see if it gets to the install screen or not. I got to the install screen and installed successfully without any NVDA kexts. You might give that a shot, might at least get you through install. I mean delete all the NVDA kexts. Anyways, I've got work to do, gotta stay in Mavs for a couple hours. If you guys figure anything out, lemme know!! Was thinking about maybe installing the working NVDA kexts from 10.9.3 and seeing what happens. I'll let u guys know. PS I talk a mean game, but I just can't bring myself to give up lol Link to comment Share on other sites More sharing options...
ADHDMedia Posted June 5, 2014 Share Posted June 5, 2014 http://pastebin.com/zjnBtHvy Link to comment Share on other sites More sharing options...
Mroczny Posted June 5, 2014 Share Posted June 5, 2014 Thanks for your guide. Everything working smoothly on maximus vi hero. Only needed to copy alc1150+hdaenabler and network kexts ^^ Link to comment Share on other sites More sharing options...
ZRC2011 Posted June 5, 2014 Share Posted June 5, 2014 Sorry I didn't read the post properly when replying, I'm getting the Bluetooth error prior to the install this is before the bash appears is there any fix I can do to get this working ? Link to comment Share on other sites More sharing options...
ofan Posted June 5, 2014 Share Posted June 5, 2014 I'm hitting the same problem, I can see the bash prompt, but it hangs up, I can't type anything, then "missing Bluetooth controller transport" appeared. Then I moved AppleIntelHD*.kext , AppleIntelF*.kext and all NVD*.kext(I have a gtx 880m card), and still get this error. So frustrated... Link to comment Share on other sites More sharing options...
hafudo Posted June 5, 2014 Share Posted June 5, 2014 I'm hitting the same problem, I can see the bash prompt, but it hangs up, I can't type anything, then "missing Bluetooth controller transport" appeared. Then I moved AppleIntelHD*.kext , AppleIntelF*.kext and all NVD*.kext(I have a gtx 880m card), and still get this error. So frustrated... when hangs up. unplug and plug in again the keyboard. it was worked for me Link to comment Share on other sites More sharing options...
ikingblack Posted June 5, 2014 Author Share Posted June 5, 2014 The Bluetooth error has no significance - most likely the error is the line or two before the error, or usually the GPU - hence why the GUI doesn't load. Link to comment Share on other sites More sharing options...
anzharhendra Posted June 5, 2014 Share Posted June 5, 2014 i'm getting the Kernel Panic.. "Unable to find driver for this platform: ACPI bla..bla..", anyone how to fix this in yosemite? Link to comment Share on other sites More sharing options...
Sen Posted June 5, 2014 Share Posted June 5, 2014 Im getting this error: "kext com.apple.driver.applemobiledevice 303009000 is in exception list, allowing to load" after successfully installing it! 2 Link to comment Share on other sites More sharing options...
ikingblack Posted June 5, 2014 Author Share Posted June 5, 2014 i'm getting the Kernel Panic.. "Unable to find driver for this platform: ACPI bla..bla..", anyone how to fix this in yosemite? Do you have NullCPUPowerManagement working? Im getting this error: "kext com.apple.driver.applemobiledevice 303009000 is in exception list, allowing to load" after successfully installing it! That's not an error, it's just allowing a kext to load. Can you boot into the system? Link to comment Share on other sites More sharing options...
Sen Posted June 5, 2014 Share Posted June 5, 2014 That's not an error, it's just allowing a kext to load. Can you boot into the system? I couldnt. Im only managed to boot the installer and install it successfully! My build is a gigabyte z77x-ud3h with nvidia gtx 660 ti. Thank you very much. Link to comment Share on other sites More sharing options...
anzharhendra Posted June 5, 2014 Share Posted June 5, 2014 Do you have NullCPUPowerManagement working? have this kext inside System/Library/Extensions/ also FakeSMC.kext. remove the Intelcpupowermanagement.kext. same result.. getting the KP Link to comment Share on other sites More sharing options...
rafikwood Posted June 5, 2014 Share Posted June 5, 2014 Anyhelp please!! I get this after write flag info clover Link to comment Share on other sites More sharing options...
ikingblack Posted June 5, 2014 Author Share Posted June 5, 2014 I couldnt. Im only managed to boot the installer and install it successfully! My build is a gigabyte z77x-ud3h with nvidia gtx 660 ti. Thank you very much. You copied all the kexts correctly right? Double check to make sure you're using the correct Clover settings, it might require DSDT patching. have this kext inside System/Library/Extensions/ also FakeSMC.kext. remove the Intelcpupowermanagement.kext. same result.. getting the KP Are you loading it properly after the install? Try kextloading it in single-user mode. Link to comment Share on other sites More sharing options...
anzharhendra Posted June 5, 2014 Share Posted June 5, 2014 Anyhelp please!! I get this after write flag info clover same problem.. :-( Are you loading it properly after the install? Try kextloading it in single-user mode. couldnt boot to the installer screen, stuck with this KP Link to comment Share on other sites More sharing options...
Sen Posted June 5, 2014 Share Posted June 5, 2014 You copied all the kexts correctly right? Double check to make sure you're using the correct Clover settings, it might require DSDT patching. Hi there, actually before came across this guide, i was following this instead: and i have followed the same customization for the clover bootloader as him. I just checked i have the fakesmc in my Yosemite extensions folder. Do you think i should redo and follow yours? Or does his work just as well? Thank you very much. 1 Link to comment Share on other sites More sharing options...
warraisraw Posted June 5, 2014 Share Posted June 5, 2014 Hi, my issue is write the commands because I'm using laptop keyboard (isn't usb keyboard). My keyboard works with VoodooPS2Controller.kext. Some way to load VoodooPS2Controller.kext before to write the commands? Regards. Link to comment Share on other sites More sharing options...
Recommended Posts