Jump to content

OS X Yosemite DP's builds!


2,033 posts in this topic

Recommended Posts

I also don't have "phase two", but the system itself seems to be working fine.

 

hi , theconnactic ;)

 

your HD 5450 work good ? my english is bad :(

 

the mine (HD 5450 512) work with kext edit (0x68F91002) but with Clover -f GraphicsInjector=No FBConfig=Eulemur port 01 (vga) (default 03)  complexe je trouve ? 

 

and you ? 

 

thank   :)

Link to comment
Share on other sites

I once had a general question to the performance of Yosemite DP1 

 

Because yes, the system is now running in boot arg = kext-dev-mode = 1 and i yes all kexts from the 10.9.3 use (AppleHDA, etc.) my question: 

 

Is thus a power loss to determine this boot arg kext-dev-mode = 1 with respect to the normal boot function WITHOUT? 

 

What do you think experts on this? 

 

Can you possibly compare how when Windows is running in safe mode, as in normal mode?

Link to comment
Share on other sites

hi , theconnactic ;)

 

your HD 5450 work good ? my english is bad :(

 

the mine (HD 5450 512) work with kext edit (0x68F91002) but with Clover -f GraphicsInjector=No FBConfig=Eulemur port 01 (vga) (default 03)  complexe je trouve ? 

 

and you ? 

 

thank   :)

 

Hi!

 

Didn't try it with Yosemite, since it powers the graphics for my AMD rig, currently the only HTPC I have.

 

All the best!

Link to comment
Share on other sites

ADHDMedia... yes you have all compatible Driver for your Hardware ? I not, Applehda ALC892 not work with Yosemite and AppleIntelCPUPowermangement is a Problem.

When i use Nullpowermangement run ok but CPU no clock down in Idle Status an run ever full Clockspeed 3,30 Ghz... is not good.

 

Please write what for my Question please... is Performance worse than run without Boot-arg ?

Link to comment
Share on other sites

I have also tested just once, it's also, as you already say if ONLY the kexts are in the 10:10 folder in Clover. But just for me the problem with the AICP,

 

the CPU does not clock down. And also the sound does not work. 

 

Now I have to boot with boot arg .. but tell it out, do you mean that the performance is worse off when the Yosemite boots with boot Arguments ?

 

In Linux, yes there's also various boot arguments, have just times on Google, looked up, but there is nothing of performance loss thereby.

 

So hope the performance despite the boot args is good.

Link to comment
Share on other sites

I have problem with Clover R2703, on my SSD have 3 partition MBR 1 Mavericks (Chameleon bootloader), 2 Win 7 64, 3 Yosemite, Clover on diskXs2 with installer. The first time boot by USB installer to YM with -s can boot into YM, when i restart (boot by USB) to MV i have error with picture attach, i reboot again with -s to MV it can finish boot.

 

When restart again by USB to YM or MV -s always error again. Return to Clover V2695+2696 no error, can boot to YM or MV with -s once time. Now with Clover R2696 on USD Installer can multi boot to MV, Win7, YM with just boot-argus=kext-dev-load=1 and VRAM=2048 to have full VRAM. With R2703 some time have 2048, some time have 1024, Theme is random and don't load config.plist.

 

post-1102673-0-40570000-1402357741.jpg

 

With Chameleon on part 1 always success to MV, win 7.

Link to comment
Share on other sites

I have problem with Clover R2703, on my SSD have 3 partition MBR 1 Mavericks (Chameleon bootloader), 2 Win 7 64, 3 Yosemite, Clover on diskXs2 with installer. The first time boot by USB installer to YM with -s can boot into YM, when i restart (boot by USB) to MV i have error with picture attach, i reboot again with -s to MV it can finish boot.

 

When restart again by USB to YM or MV -s always error again. Return to Clover V2695+2696 no error, can boot to YM or MV with -s once time. Now with Clover R2696 on USD Installer can multi boot to MV, Win7, YM with just boot-argus=kext-dev-load=1 and VRAM=2048 to have full VRAM. With R2703 some time have 2048, some time have 1024, Theme is random and don't load config.plist

 

Can't say, since it seems there's no changelog for recent Clover commits from 2675 to 2703 (Slice said "just Yosemite fixes and adaptations")

Link to comment
Share on other sites

Hey guys. Couple or strange issues with Yosemite, wanna know if it's just me or what. First, I can't drop my Yosemite HDD into the Finder sidebar. When I do, it just disappears. Weird. Second, I can't turn auto-login on for my main user, only for a guest account. Any ideas?

Link to comment
Share on other sites

For me, aside being a little bit sluggish, it works just as Mavericks, except for FCPX, which always end up crashing. Since I'm mostly an audio and animations guy, and VirtualBox, Flash Builder/Premiere CS6 and related plugins and, most important of all, Logic Pro X, Audition CS6 and all my precious VST and AU plugins are working without a single glitch, I'm proud to say I'm using 10.10 all the time, hopefully familiarizing myself with all its quirks and perks in advance from its official release. But I'm must say I'm still on the Clover revision Ira+ got it to boot the very first time: 2694, if I'm not wrong. Every newer revision I try would end up giving me the reboot upon desktop issue that was like hell for you a few days ago.

 

All the best!

Link to comment
Share on other sites

Nice! Ya, I can't get FCPX to load any plugins, so I can't use it as a daily driver just yet because I'm a video editor.

 

But the OS overall is actually really snappy - seems a bit more so than Mavs to me. And I just actually committed to Clover on my main HDD, which is working perfectly bow to boot Mavs, but every time I boot Clover off my HDD and try to boot Yosemite I get stuck at PCI Configuration Begin. It still boots perfectly fine off of the USB, so I just need to figure out the setting that I need to change in order to get it booting like it was on the USB. Any ideas?

OH and also, when I boot Clover off my HDD, the resolution is all wrong, but when I boot Clover off my USB stick, it's fine. WTF?! Lol

Link to comment
Share on other sites

Nice! Ya, I can't get FCPX to load any plugins, so I can't use it as a daily driver just yet because I'm a video editor.

 

But the OS overall is actually really snappy - seems a bit more so than Mavs to me. And I just actually committed to Clover on my main HDD, which is working perfectly bow to boot Mavs, but every time I boot Clover off my HDD and try to boot Yosemite I get stuck at PCI Configuration Begin. It still boots perfectly fine off of the USB, so I just need to figure out the setting that I need to change in order to get it booting like it was on the USB. Any ideas?

OH and also, when I boot Clover off my HDD, the resolution is all wrong, but when I boot Clover off my USB stick, it's fine. WTF?! Lol

Try coping the EFI folder from your USB to the HD...

Link to comment
Share on other sites

Try coping the EFI folder from your USB to the HD...

See I already did that, I just can't figure out why it would boot my Mavericks partition and not my Yosemite partition? When both work from the USB drive?

Link to comment
Share on other sites

I can't get into single user mode when booting off the HDD... But can I boot off my USB and do the same thing? USB still works...

It returns 'command not found'

You sure that's the right command? Getting an error in single user mode when booting off of my USB.

Link to comment
Share on other sites

I have Ozmosis also and I didn't need to place fakeSMC on the USB or use a boot flag and it all worked fine. I'm still not using a boot flag, although I'm running vanilla. Once I install a patched AppleHDA and HDAEnabler1 kexts I'll probably have to. Are you on the latest Ozmosis build? Did you put the hidden files on the USB? I've seen a couple other guys in this thread who got it working relatively easily using Ozmosis as well. Have you tried a clean bios and no modified kexts in the installer?

 

I did download the latest QUO bios and got all the ozmosis files and moded my bios. 10.10 is loading half way, let it for a few seconds but nothing happen. Will leave it a bit longer to see if it loads. I didn't know that the loading bar only goes half way. I only had 10.10 pure on usb and then also tried with only FakeSmc on it. Will try again after my holiday

Link to comment
Share on other sites

@ADHDMedia,

 

Is your hard drive partitioned GUID/GPT with a FAT32 EFI partition?  What is the output when you type in terminal

diskutil list

What custom options did you use to install Clover on your USB vs on the hard drive?  Did you install to the hard drive's EFI partition?

eg can you post screenshot like this to show the install options used?

 

post-846696-0-57540200-1402139945_thumb.

Link to comment
Share on other sites

This is the readout from diskutil.  I'll check the Clover installation and see what I checked... if I can remember lol

ADHD-myHack-Pro:~ dmeister08$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *128.0 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Mavericks HD            100.0 GB   disk0s2
   3:                  Apple_HFS Yosemite HD             27.0 GB    disk0s3
   4:                 Apple_Boot Recovery HD             650.0 MB   disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *250.1 GB   disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS ADHD Data               249.7 GB   disk1s2
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk2
   1:                        EFI EFI                     209.7 MB   disk2s1
   2:                  Apple_HFS ADHD Data II            499.8 GB   disk2s2
/dev/disk3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *320.1 GB   disk3
   1:                        EFI EFI                     209.7 MB   disk3s1
   2:                  Apple_HFS ADHD Data III           319.7 GB   disk3s2
/dev/disk4
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *1.0 TB     disk4
   1:               Windows_NTFS Chaos                   1.0 TB     disk4s1
/dev/disk5
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk5
   1:                        EFI EFI                     209.7 MB   disk5s1
   2:                  Apple_HFS ADHD Data Ext           499.8 GB   disk5s2
/dev/disk6
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *7.9 GB     disk6
   1:                  Apple_HFS Clover                  7.9 GB     disk6s1

I'm pretty sure these are the options I used to install Clover on the EFI partition of disk0: 

 

0e84fe1334.png

 

I'd love some advice as this is getting pretty irritating.  I'm able to boot with absolutely no issues 10.9.3 and 10.10 from USB and 10.9.3 from HDD Clover.  It's just the 10.10 install that won't boot from the EFI partition of disk0.

 

What did I do wrong?

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...