thetony2313 Posted June 3, 2014 Share Posted June 3, 2014 I have never encountered this in my Hackintoshing days but whenever I get booted into the installer I am greeted with "OSX UTILITIES" rather than the OS installer. This means I cannot install OSX only DL it from the internet which of course requires apple verification which I fail. I put the installer on my flash drive by restoring the basesystem dmg to it. Link to comment Share on other sites More sharing options...
dchao12345 Posted June 3, 2014 Share Posted June 3, 2014 I've managed to get 10.10 installed succesfully on my Lenovo U310, however, QE/CI on my HD4000 is a fail for me. Moving intel graphics drivers fixed the Missing Bluetooth Controller Transport issue, but OS X runs slow as heck. FYI: I've hackintoshed before and testing out 10.10 on a different partition before I upgrade my 10.9. I also run clover as my bootloader. Anybody got any ideas? Link to comment Share on other sites More sharing options...
ikingblack Posted June 3, 2014 Share Posted June 3, 2014 I've gotten the Installer to boot to the super-light gray screen with the NullCPUPowerManagement kext and FakeSMC, but as soon as it gets to the darker gray screen I get a KP saying something about no HPETs (but I do have HPET enabled and in 64-bit mode in my BIOS) and "CPUs configured incorrectly". I'm using Clover with no modifications other than the kexts on the Installer. How would I go about fixing this? It seems like I need to patch the AppleIntelCPU kext, but that's for 10.9. How would I fix this? Thanks! Oh, and I'm using an Intel i7 870 with an 1156 GA P55 USB3 board. Link to comment Share on other sites More sharing options...
Orkaliz Posted June 3, 2014 Share Posted June 3, 2014 I'm also stuck on the 107 malformed screen lol Link to comment Share on other sites More sharing options...
iFIRE Posted June 3, 2014 Share Posted June 3, 2014 http://www.insanelym...424-boot-guide/ Link to comment Share on other sites More sharing options...
truemac Posted June 3, 2014 Share Posted June 3, 2014 Hey all, Is it safe to use the same TRIM patch, i.e. in myHack? Thanks! use Trim Enabler Works Fine. 1 Link to comment Share on other sites More sharing options...
shimigg Posted June 3, 2014 Share Posted June 3, 2014 I got it working , but i have a weird issue , every few seconds the mouse reappears/reposition itself in the top left corner ... What to do ? Thanks! Link to comment Share on other sites More sharing options...
Riley Freeman Posted June 3, 2014 Share Posted June 3, 2014 I've got it installed now. My problems stemmed from expecting Ozmosis to be able to load its kexts at some point but instead I'm back to installing them into /S/L/E for now. Thanks to truesoldier for the tip. My regular audio patch worked fine. Also, as the OpenCL power management bug is back I used MacAndor's OpenCL.framework patch to kill that. Despite unchecking the box to reload my apps after a restart it insists on loading them up anyway. I didn't like the old Finder icon but this new one is horrible. The new folder icons are even worse. Link to comment Share on other sites More sharing options...
JahStories Posted June 4, 2014 Share Posted June 4, 2014 Osx Yosemite have integrated drivers for touchscreen computers, touch works without commercial driver on the surface pro running it!!!!!!!!!!! may we have to expect something new? 3 Link to comment Share on other sites More sharing options...
MattsCreative Posted June 4, 2014 Share Posted June 4, 2014 http://www.insanelymac.com/forum/topic/298438-1010-vanilla-bootable-usb-guide/ this should help a few people Link to comment Share on other sites More sharing options...
Mirone Posted June 4, 2014 Share Posted June 4, 2014 Finally, install Yosemite, Apparently everything working fine. 1 Link to comment Share on other sites More sharing options...
RCOO Posted June 4, 2014 Share Posted June 4, 2014 I just got it installed. How do we apply our custom kexts? Ive tried using kext utility but now os X wont boot! Also my wifi and Bluetooth started working natively. Bluetooth never worked before (it was integrated with the wifi card atheros ar9285 and I guess os X never liked it much). Could this be because of the new os X version or because of clover? Since I used chameleon up until 10.10... Link to comment Share on other sites More sharing options...
Mirone Posted June 4, 2014 Share Posted June 4, 2014 installed the kexts using kextwizard. after install kexts run this command in terminal: sudo touch /System/Library/Extensions 1 Link to comment Share on other sites More sharing options...
deadpxl Posted June 4, 2014 Share Posted June 4, 2014 up & running audio & lan works i5 2500k + Asus P8P67 Deluxe + EVGA GTX 650Ti Boost 3 Link to comment Share on other sites More sharing options...
mnfesq Posted June 4, 2014 Share Posted June 4, 2014 I have Yosemite running on a 40 GB partition and it's working great except that, like most HP laptops, I can only boot up using cpus=1. NullCPUPowerManagement.kext didn't seem to do anything. Any ideas until Clover is able to make the Lapic patch work? Link to comment Share on other sites More sharing options...
zeamp Posted June 4, 2014 Share Posted June 4, 2014 Got 10.10 to boot. Can't login to iCloud. I am trying to recall the Mavericks fix used in previous versions. Is there a new method for Yosemite? Link to comment Share on other sites More sharing options...
warlikewings Posted June 4, 2014 Share Posted June 4, 2014 I have Yosemite running on a 40 GB partition and it's working great except that, like most HP laptops, I can only boot up using cpus=1. NullCPUPowerManagement.kext didn't seem to do anything. Any ideas until Clover is able to make the Lapic patch work? Glad to see you here my friend! I still can't get the installer to boot. Having the instant reboot issue. I forget now, was your HP a haswell i7 or was it the ivy bridge? Link to comment Share on other sites More sharing options...
mnfesq Posted June 4, 2014 Share Posted June 4, 2014 Glad to see you here my friend! I still can't get the installer to boot. Having the instant reboot issue. I forget now, was your HP a haswell i7 or was it the ivy bridge? Ivy Bridge - Intel HM76 Chipset 1 Link to comment Share on other sites More sharing options...
theconnactic Posted June 4, 2014 Share Posted June 4, 2014 I have never encountered this in my Hackintoshing days but whenever I get booted into the installer I am greeted with "OSX UTILITIES" rather than the OS installer. This means I cannot install OSX only DL it from the internet which of course requires apple verification which I fail. I put the installer on my flash drive by restoring the basesystem dmg to it. Same here: rather strange. Did you manage to solve it? I'm actually posting this from the Safari version from inside the installer, for that matter. Link to comment Share on other sites More sharing options...
theconnactic Posted June 4, 2014 Share Posted June 4, 2014 P.S.: In fact, that's what's happening: P.P.S.: and by the way, I only needed to run kextload for fakeSMC.kext the very first time. Now, it's enough to have kext-dev-mode=1 as a boot argument in the config.plist. Link to comment Share on other sites More sharing options...
InteliMac Pro Posted June 4, 2014 Share Posted June 4, 2014 Gave it a whirl since a couple of you said you got it going on ozmosis. Created my install USB and it booted no problem. My first attempt to install gave me the beach ball of death right at the start so I restarted and it worked the 2nd time. It booted right up and showed the setup assistant for a few seconds but then it flaked out on me until I force closed the setup assistant. I restarted and then got the "No" symbol halfway through the progress bar. I'm assuming it's a fakeSMC problem. Working on that now. Link to comment Share on other sites More sharing options...
Slice Posted June 4, 2014 Share Posted June 4, 2014 Test, please, kexts injection and PM patches in Yosemite Clover-2693-Yosemite_test.zip Also I want to remind that FakeSMC_rev746 in my signature is signed (thanks to AnV) 14 Link to comment Share on other sites More sharing options...
AndreiS Posted June 4, 2014 Share Posted June 4, 2014 Hey Guys, I got the installer working, but after 3-4 minutes it fails and tells me an error occurred when unpacking "Essentials.pkg". Is the USB bad? OR is it something else? Edit: 1 more thing... I have a working Mavericks Installation from which I prepare the Usb, everything is fine while the PC is on, but after I restart it(in case I need to remake the Usb like now) it tells me it cannot repair the disk and I cannot write files to it. Is this common? Link to comment Share on other sites More sharing options...
abdouoi Posted June 4, 2014 Share Posted June 4, 2014 I have Yosemite running on a 40 GB partition and it's working great except that, like most HP laptops, I can only boot up using cpus=1. NullCPUPowerManagement.kext didn't seem to do anything. Any ideas until Clover is able to make the Lapic patch work? Is it a probook or elitebook? Link to comment Share on other sites More sharing options...
mnfesq Posted June 4, 2014 Share Posted June 4, 2014 Is it a probook or elitebook? Like my signature below reads, it's an HP Envy 17t-3200. 1 Link to comment Share on other sites More sharing options...
Recommended Posts