lisai9093 Posted August 9, 2014 Share Posted August 9, 2014 did you see Handoff on General Settings? which Bluetooth and Smbios did you use? thx best regards Yes, there is handoff toggle in settings.curently using bcm94352 (bluetooth is bcm20702). Smbios is Macbook Air 5,2 1 Link to comment Share on other sites More sharing options...
MacWill Posted August 9, 2014 Share Posted August 9, 2014 Wpplay2, The patch from Maniac10 indicates my country code is FCC, ie, USA. But the Brazil country code indicates "(FCC3_WORLD) USA & Canada w / 5470 band." Perhaps Maniac10 or Toleda can help us in the correct patch. 1 Link to comment Share on other sites More sharing options...
TimeWalker75a Posted August 9, 2014 Share Posted August 9, 2014 Since the patch overrides _wlan_get_regdomain function - just change 64 in the Replace sequence to whichever region you fancy: 64 = FCC 65 = APAC 6A = RoW (Rest of the World) 37 = ETSI 8D = Japan 5E = Korea FreeBSD regdoman list states: <country id="BR"> <isocc>76</isocc> <name>Brazil</name> <rd ref="fcc"/> </country> 3 Link to comment Share on other sites More sharing options...
ham4ever Posted August 9, 2014 Share Posted August 9, 2014 my yosemite DP5 keep restarting after verbos mode loads all, what is the way to creat cache from other system in other harddisk ? Link to comment Share on other sites More sharing options...
burkett375 Posted August 10, 2014 Share Posted August 10, 2014 Had same problem here, had to boot into Yosemite Recovery, use Disk Utility, repair permissions, repair disk ( probably don't need these 2) then open terminal, and type "kextcache -update-volume Path to Yosemite" e.g kextcache -update-volume /Volumes/Yosemite I always just boot into single user verbose mode and type: sudo chmod -R 755 /System/Library/Extensions/* sudo chown -R root:wheel /System/Library/Extensions/* sudo chown root:admin / sudo kextcache -system-prelinked-kernel sudo kextcache -system-caches 1 Link to comment Share on other sites More sharing options...
WinstonAce Posted August 10, 2014 Share Posted August 10, 2014 If you have a Apple Dev account you can download the full installer that is up to date just fyi, use this command in terminal to create the installer: (make sure you change the /Volumes/Untitled section to the name of your USB volume name) sudo /Applications/Install\ OS\ X\ Yosemite\ Developer\ Preview.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Yosemite\ Developer\ Preview.app --nointeraction What is the md5 of installesd.DMG of the full dp5 installer? Thanks in advance Link to comment Share on other sites More sharing options...
crusher Posted August 12, 2014 Share Posted August 12, 2014 Don't work USB 3.0.What is reason? Link to comment Share on other sites More sharing options...
TheBoatman Posted August 13, 2014 Share Posted August 13, 2014 Don't work USB 3.0.What is reason? This is interesting, I have an Asus Z87 Deluxe Dual and have lost the four rear ASMedia USB ports although they are visible from the BIOS, but not OS X which has to be a driver issue? I am not sure when this at first happened with Yosemite but it appears to be recent. Thought my MB was in for an RMA but difficult to prove it faulty when the BIOS sees them fine. One drawback with hacking I guess, the remaining Intel ports work fine. Link to comment Share on other sites More sharing options...
crusher Posted August 13, 2014 Share Posted August 13, 2014 I now have another problem,after put my PC to sleep he restarting.What is reason now. My Clover 2795 instaled on Mavericks SSD. Link to comment Share on other sites More sharing options...
wern apfel Posted August 13, 2014 Share Posted August 13, 2014 I now have another problem,after put my PC to sleep he restarting.What is reason now. My Clover 2795 instaled on Mavericks SSD. I have to check start up automatically after power failure on energy saver Link to comment Share on other sites More sharing options...
crusher Posted August 13, 2014 Share Posted August 13, 2014 But on Mavericks work fine.Work sleep and wake all works!!! Link to comment Share on other sites More sharing options...
magnifico Posted August 13, 2014 Share Posted August 13, 2014 but because there is so stubborn it is again immature yosemite 1 Link to comment Share on other sites More sharing options...
crusher Posted August 13, 2014 Share Posted August 13, 2014 Maybe.Wait October and GM. Link to comment Share on other sites More sharing options...
magnifico Posted August 13, 2014 Share Posted August 13, 2014 Maybe.Wait October and GM. Yeahh Link to comment Share on other sites More sharing options...
mendietinha Posted August 14, 2014 Share Posted August 14, 2014 i hope gm is out in september. quite anxious here. Link to comment Share on other sites More sharing options...
bipolarman Posted August 14, 2014 Share Posted August 14, 2014 but because there is so stubborn it is again immature yosemite Wow immature.....??? This guy has no idea Link to comment Share on other sites More sharing options...
jsl Posted August 14, 2014 Share Posted August 14, 2014 This is interesting, I have an Asus Z87 Deluxe Dual and have lost the four rear ASMedia USB ports although they are visible from the BIOS, but not OS X which has to be a driver issue? I am not sure when this at first happened with Yosemite but it appears to be recent. Thought my MB was in for an RMA but difficult to prove it faulty when the BIOS sees them fine. One drawback with hacking I guess, the remaining Intel ports work fine. Hi, TheBoatman: Can you boot Yosemite with Clover 2 ? Up to now I can boot with Chameleon 2.2 2380 V3 at Asus Z87 Deluxe Dual MB only. If you can boot with Clover, can you help me the /EFI/Clover/config.plist for reference ? Link to comment Share on other sites More sharing options...
TheBoatman Posted August 14, 2014 Share Posted August 14, 2014 Hi, TheBoatman: Can you boot Yosemite with Clover 2 ? Up to now I can boot with Chameleon 2.2 2380 V3 at Asus Z87 Deluxe Dual MB only. If you can boot with Clover, can you help me the /EFI/Clover/config.plist for reference ? @jsl Hi sure thing.... I only use Clover and yes Yosemite DP5 boots absolutely fine. Everything works including all USB ports now, it was an RMA (Motherboard changed) job as the Asmedia USB3 ports were a problem. I am using a Intel i5-4670K processor and GTX 660 only for graphics. You will need to change the GUI and other sections that do not apply to you. Good luck. config.plist.zip 1 Link to comment Share on other sites More sharing options...
jsl Posted August 15, 2014 Share Posted August 15, 2014 @jsl Hi sure thing.... I only use Clover and yes Yosemite DP5 boots absolutely fine. Everything works including all USB ports now, it was an RMA (Motherboard changed) job as the Asmedia USB3 ports were a problem. I am using a Intel i5-4670K processor and GTX 660 only for graphics. You will need to change the GUI and other sections that do not apply to you. Good luck. config.plist.zip Thanks for your prompt reply and help. Using your config.plist still got kernel cache or kernel alloc error type 2 on early booting of Clover in Public Beta and DP5 of Yosemite. Booting in DP3 got KP at AppleACPIPlatformExpert: start failed Unable to find IOPlatformExpert.cpp:1590 Have you had similar experience before ? Link to comment Share on other sites More sharing options...
TheBoatman Posted August 15, 2014 Share Posted August 15, 2014 Thanks for your prompt reply and help. Using your config.plist still got kernel cache or kernel alloc error type 2 on early booting of Clover in Public Beta and DP5 of Yosemite. Booting in DP3 got KP at AppleACPIPlatformExpert: start failed Unable to find IOPlatformExpert.cpp:1590 Have you had similar experience before ? That could be a graphics card issue as if i try to boot using the Intel o/b graphics (4600) I see the same error. In your BIOS ( latest is 2004), I set the processor memory to XMP, and although not supposedly necessary set all the PM options to active, I set the Graphics to PCIE, disable the o/b Ethernet (as I use a Sonnett Presto Gigabit PCIe card for ethernet) then set up the boot options. I also disable CSM in BIOS, and in the security settings, I remove the security files. Thats about it. I would try some of the different options in the BIOS, but if you are using the IG graphics only that might be a problem although many have got it to work, but not me. I have tried with the Graphics card in and out of the PC - no change. My monitor has only 1 display port and two DVI. The mother board only has an HDMI which my monitor does not have (Samsung SA850), plus the two thunderbolt ports,but those need to have the IG active My graphics card is GTX 660 basic Asus one with the GOP bios loaded, and the o/b graphics is not activated at all - tying to activate that causes the error you describe. Keep on - you will get there! Link to comment Share on other sites More sharing options...
jsl Posted August 16, 2014 Share Posted August 16, 2014 That could be a graphics card issue as if i try to boot using the Intel o/b graphics (4600) I see the same error. In your BIOS ( latest is 2004), I set the processor memory to XMP, and although not supposedly necessary set all the PM options to active, I set the Graphics to PCIE, disable the o/b Ethernet (as I use a Sonnett Presto Gigabit PCIe card for ethernet) then set up the boot options. I also disable CSM in BIOS, and in the security settings, I remove the security files. Thats about it. I would try some of the different options in the BIOS, but if you are using the IG graphics only that might be a problem although many have got it to work, but not me. I have tried with the Graphics card in and out of the PC - no change. My monitor has only 1 display port and two DVI. The mother board only has an HDMI which my monitor does not have (Samsung SA850), plus the two thunderbolt ports,but those need to have the IG active My graphics card is GTX 660 basic Asus one with the GOP bios loaded, and the o/b graphics is not activated at all - tying to activate that causes the error you describe. Keep on - you will get there! Using most of your BIOS setting except I need enabled CSM to boot Clover via USB Flash, I can login DP3, Beta, and DP5 of Yosemite with AMD HD 7950 only. But Adobe Flash Plugin unable to play in Youtube by Firefox and AppleHDA unloaded bother me a lot. When I boot with Chameleon 2.2 2380 V3, I can enable both Intel HD4600 and AMD HD 7950, and play Flash in Youtube smoothly. Do you have similar problem ? Or any suggestion to solve it ? esp. how to enable HDMI audio via AppleHDA.kext with Clover boot (no such a problem with Chameleon boot in my Hackintosh) Link to comment Share on other sites More sharing options...
TheBoatman Posted August 16, 2014 Share Posted August 16, 2014 Using most of your BIOS setting except I need enabled CSM to boot Clover via USB Flash, I can login DP3, Beta, and DP5 of Yosemite with AMD HD 7950 only. But Adobe Flash Plugin unable to play in Youtube by Firefox and AppleHDA unloaded bother me a lot. When I boot with Chameleon 2.2 2380 V3, I can enable both Intel HD4600 and AMD HD 7950, and play Flash in Youtube smoothly. Do you have similar problem ? Or any suggestion to solve it ? esp. how to enable HDMI audio via AppleHDA.kext with Clover boot (no such a problem with Chameleon boot in my Hackintosh) No I do not have such problems. Toleda is the expert for Audio/HDMI audio - I have no such issues as all my audio is digital and via USB DAC, I don't bother with the o/b audio at all, so it is not an issue for me. I also have not used Chameleon for a very long time as Clover works well for me. If Chameleon is working for you that is great. Do not understand though why you need CSM to boot Clover via USB, although you will need CSM enabled for Chameleon. I do all my testing with an USB flash drive formatted in MBR and Fat32 and have FSInject-64.efi in my EFI/CLOVER/driver64UEFI directory, and CSM always disabled. Link to comment Share on other sites More sharing options...
Graebags Posted August 18, 2014 Share Posted August 18, 2014 No I do not have such problems. Toleda is the expert for Audio/HDMI audio - I have no such issues as all my audio is digital and via USB DAC, I don't bother with the o/b audio at all, so it is not an issue for me. I also have not used Chameleon for a very long time as Clover works well for me. If Chameleon is working for you that is great. Do not understand though why you need CSM to boot Clover via USB, although you will need CSM enabled for Chameleon. I do all my testing with an USB flash drive formatted in MBR and Fat32 and have FSInject-64.efi in my EFI/CLOVER/driver64UEFI directory, and CSM always disabled. Just as a point of interest, which usb DAC ? Link to comment Share on other sites More sharing options...
VirusX Posted August 18, 2014 Share Posted August 18, 2014 anyone already found some new stuff in the DP6? Are the volume/brightness toggles fixed (transparent & pretty again)? edit: I'm downloading - it's very slow. 898 MB coming from DP5 Link to comment Share on other sites More sharing options...
mendietinha Posted August 18, 2014 Share Posted August 18, 2014 didn´t show up here yet. strange. EDIT thanks to pike´s tip it´s here: 1 Link to comment Share on other sites More sharing options...
Recommended Posts