FrDakota Posted June 7, 2014 Share Posted June 7, 2014 Theres no need, AppleHDA patched works just fine. Better keep the original. At least that's what I always try to do, keep it as native as possible. VoodooHDA is more for systems that have an exotic or unknown audio chip. Correct me if I'm wrong. Yes it works in analogue, but I need digital out. 1 Link to comment Share on other sites More sharing options...
theconnactic Posted June 7, 2014 Share Posted June 7, 2014 Strange with my Z77-DS3H I have above 12800. On mine I installed the VoodooHDA 2.8.5, removed AppleHDA and it works. Mine is i5, not i7, but I used to have 11.200 points or more up to 10.9.1. For the record, a hackintosh I built for a friend, still on 10.9.0, with a B75 board and i7 3770 CPU, scores over 13.000 consistently. Link to comment Share on other sites More sharing options...
digital_dreamer Posted June 7, 2014 Share Posted June 7, 2014 Question for all you guys using the kextcache command with paths like the following: kextcache -m /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext /System/Library/Extensions If we are including /System/Library/Extensions path, don't we need to also add the path to /Library/Extensions (There are RAID related extensions there) to include all extensions like so:? kextcache -m /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext /System/Library/Extensions /Library/Extensions Or, is this excluded just to get to boot, as the system will update the kernel cache and include all kexts once arriving to the desktop? Curious. best regards, MAJ Link to comment Share on other sites More sharing options...
theconnactic Posted June 7, 2014 Share Posted June 7, 2014 UPDATE: there's something very odd going on! Just added NullCPUPowerManagement.kext with Kext Utility, rebuild the cache, and restarted. Confirmed in SystemInformation that it's in fact loaded. But then i added AppleIntelCPUPowerManagementInfo and get this: 6/7/14 1:33:23.000 PM kernel[0]: AICPUPMI: CPU P-States [ (16) 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 ] And, of course, another round of underwhelming benchmark scores. Following the test with HWMonitor, I noticed I lost turbo states, but the strange multipliers (x31, x28 etc) were there. I think I narrow down the options to one culprit - it's XNU CPU Power Management rearing its ugly head! Question: how I disable it completely (from Clover, I suppose), so I get a functional system again? UPDATE: there's something very odd going on! Just added NullCPUPowerManagement.kext with Kext Utility, rebuild the cache, and restarted. Confirmed in SystemInformation that it's in fact loaded. But then i added AppleIntelCPUPowerManagementInfo and get this: 6/7/14 1:33:23.000 PM kernel[0]: AICPUPMI: CPU P-States [ (16) 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 ] And, of course, another round of underwhelming benchmark scores. Following the test with HWMonitor, I noticed I lost turbo states, but the strange multipliers (x31, x28 etc) were there. I think I narrow down the options to one culprit - it's XNU CPU Power Management rearing its ugly head! Question: how I disable it completely (from Clover, I suppose), so I get a fully functional system again? EDIT 2: I actually went ahead and removed AppleIntelCPUPowerManagement.kext from my system, rebuilt caches and then: AICPUPMI: CPU P-States [ 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 (34) 35 36 ] I'm almost insulted, lol! It confirms its XNU CPU Power Management. It's a change for worse. Why, Apple, why?!?! Must disable it, must wipe it out. Want my good old five steps back! Link to comment Share on other sites More sharing options...
Slice Posted June 7, 2014 Share Posted June 7, 2014 Strange technologies you are using, guys! Question for all you guys using the kextcache command with paths like the following: kextcache -m /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext /System/Library/Extensions If we are including /System/Library/Extensions path, don't we need to also add the path to /Library/Extensions (There are RAID related extensions there) to include all extensions like so:? kextcache -m /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext /System/Library/Extensions /Library/Extensions Or, is this excluded just to get to boot, as the system will update the kernel cache and include all kexts once arriving to the desktop? Curious. best regards, MAJ What is the purpose to create mkext? Long time I live without it. OSX since 10.7 is not needed it. AICPUPMI: CPU P-States [ 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 (34) 35 36 ] I'm almost insulted, lol! It confirms its XNU CPU Power Management. It's a change for worse. Why, Apple, why?!?! Must disable it, must wipe it out. Want my good old five steps back! You have maximum and minimum. Why you need one more step? Because the kext shows it? How can you know intermediate steps are used? Gigebench? A number of steps depends on MacModel and IOPlatformPlugins. Link to comment Share on other sites More sharing options...
hack.in Posted June 7, 2014 Share Posted June 7, 2014 Hi everyone while booting with installer ,after installation screen mouse deosnt work propely stucks in Upper left corner , i have wireless Keyboard/Mouse of Microsoft i used my freind USB mouse which works but too much slow .. Link to comment Share on other sites More sharing options...
theconnactic Posted June 7, 2014 Share Posted June 7, 2014 Strange technologies you are using, guys! What is the purpose to create mkext? Long time I live without it. OSX since 10.7 is not needed it. Screen Shot 2014-06-07 at 21.26.03.png You have maximum and minimum. Why you need one more step? Because the kext shows it? How can you know intermediate steps are used? Gigebench? A number of steps depends on MacModel and IOPlatformPlugins. No, Slice, you didn't understand. Didn't at all. I'm neither asking help to enable speedstep - that would be silly for someone with my experience, and way off topic - nor wanting more p-states. In fact, I want less p-states, preferentially the same min-max-three turbo states I used to have until 10.9.1, so the performance of my system comes back to normal. I want it so badly I put NullCPUPowerManagemnt.kext on a system that natively supports AICPUPM. To no avail: for some strange reason - my system is not Haswell! - XCPM is taking effect. It's not happening only 10.10: now I just confirmed it happening also with 10.9.3. So the question remains: how do I disable XCPM, so I can go back to fewer p-states or none at all? P.S.: MSRDumper. ACPUPMInfo. Your FakeSMC's HWMonitor. All of them show strange multipliers that never were there before. That shouldn't be there, specially with an iMac smBIOS. Link to comment Share on other sites More sharing options...
Pike R. Alpha Posted June 7, 2014 Share Posted June 7, 2014 UPDATE: there's something very odd going on! Just added NullCPUPowerManagement.kext with Kext Utility, rebuild the cache, and restarted. Confirmed in SystemInformation that it's in fact loaded. But then i added AppleIntelCPUPowerManagementInfo and get this: 6/7/14 1:33:23.000 PM kernel[0]: AICPUPMI: CPU P-States [ (16) 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 ] And, of course, another round of underwhelming benchmark scores. Following the test with HWMonitor, I noticed I lost turbo states, but the strange multipliers (x31, x28 etc) were there. I think I narrow down the options to one culprit - it's XNU CPU Power Management rearing its ugly head! Question: how I disable it completely (from Clover, I suppose), so I get a functional system again? EDIT 2: I actually went ahead and removed AppleIntelCPUPowerManagement.kext from my system, rebuilt caches and then: AICPUPMI: CPU P-States [ 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 (34) 35 36 ] I'm almost insulted, lol! It confirms its XNU CPU Power Management. It's a change for worse. Why, Apple, why?!?! Must disable it, must wipe it out. Want my good old five steps back! If you install/start the Intel Power Gadget you'll see the same frequencies, so the simplified answer is that this particular version of AppleIntelCPUPowerManagementInfo.kext shows you all reached frequencies. Not specifically (limited to) the p-states triggered by Apple's power management functions (be it the XCPM code in the (mach)kernel or the AppleIntelCPUPowerManagement.kext). This is also why I said to use a self compiled version of the kext, because in later versions you can disable logIGPUStyle by setting it to false. And to make matters worse. Removing AppleIntelCPUPowerManagement.kext won't automatically enable/select XCPM. What you see is, most likely, the Intel CPU at work, or the (UEFI) BIOS. But anyway. This is DP1 and you cannot possibly expect that things work from day one… so sit back and enjoy the ride. A long one even p.s. Take a look at this MSR IA32_ENERGY_PERF_BIAS......(0x1B0) When that isn't set to 1 then more Apple p-states will be reached. 1 Link to comment Share on other sites More sharing options...
cdavid138 Posted June 7, 2014 Share Posted June 7, 2014 Keep getting an Undefined error: 0 near the end of the install. Link to comment Share on other sites More sharing options...
theconnactic Posted June 7, 2014 Share Posted June 7, 2014 If you install/start the Intel Power Gadget you'll see the same frequencies, so the simplified answer is that this particular version of AppleIntelCPUPowerManagementInfo.kext shows you all reached frequencies. Not specifically (limited to) the p-states triggered by Apple's power management functions (be it the XCPM code in the (mach)kernel or the AppleIntelCPUPowerManagement. Is it also true for MSRDumper and the real-time monitor of the HWMonitor app? Otherwise, matters are indeed made worse, and It's possible that it's the CPU or the UEFI BIOS at work. Anyway. I'm prepared to "enjoy" the DP ride, only wasn't expecting to "enjoy" also wit a stable release (10.9.3). All the best! P.S.: answering your P.S.:, Pike: how can I set it to 1? Link to comment Share on other sites More sharing options...
Ahmed_shiko Posted June 7, 2014 Share Posted June 7, 2014 chameleon bootloader Support os x 10.10 Link to comment Share on other sites More sharing options...
TheHacker66 Posted June 7, 2014 Share Posted June 7, 2014 Well, it seems something's wrong with my install, since when i boot with -v -s kext-dev-mode=1 and rebuild the kernel cache then exit the system boots up and display works flawlessly, if i just reboot (and I have not installed any more kexts before) display works 1/10 of the times. Weird. Gonna go and install iOS 8 on my iPad 2 to test new Yosemite features. Link to comment Share on other sites More sharing options...
ADHDMedia Posted June 7, 2014 Share Posted June 7, 2014 chameleon bootloader Support os x 10.10 Umm... Is this a question, or a statement...?! Link to comment Share on other sites More sharing options...
TheHacker66 Posted June 7, 2014 Share Posted June 7, 2014 Umm... Is this a question, or a statement...?! Question for sure, there's no new revision stating Yosemite's compatibility. Btw, I'll switch to Chameleon once it gets that, hopefully it'll fix my display issue. Link to comment Share on other sites More sharing options...
Sinadrin Posted June 7, 2014 Share Posted June 7, 2014 i'm stuck here I need help! Using: Clover r2695 + 2696 FakeSMC.kext in 10.10 Folder Link to comment Share on other sites More sharing options...
rishaan Posted June 7, 2014 Share Posted June 7, 2014 Ok so I installed Yosemite to my HDD. Whenever I boot my systems gets stuck on this line: kext com.apple.driver.applemobiledevice 303009000 is in exception list, allowing to load I left the computer overnight and I saw no progress in the morning. Any thoughts? Strange with my Z77-DS3H I have above 12800. On mine I installed the VoodooHDA 2.8.5, removed AppleHDA and it works. Did you get 10.10 working on your z77-ds3h? I have one and cant seem to get it? Link to comment Share on other sites More sharing options...
Luca Chris Posted June 7, 2014 Share Posted June 7, 2014 (edited) hi guys, how to fix sound for Realtek ALC888? Edited June 8, 2014 by fantomas1 we have the 'Sound" forum for this request Link to comment Share on other sites More sharing options...
ccsr Posted June 7, 2014 Share Posted June 7, 2014 Read my last posts for sound and applemobiledevice errors Link to comment Share on other sites More sharing options...
ADHDMedia Posted June 7, 2014 Share Posted June 7, 2014 Question for sure, there's no new revision stating Yosemite's compatibility. Btw, I'll switch to Chameleon once it gets that, hopefully it'll fix my display issue. Yes, I'm waiting patiently as well. I have had flawless installs since 10.6 using Chameleon, only reason I'm using Clover now is cuz of compatibility Link to comment Share on other sites More sharing options...
Duran Keeley Posted June 7, 2014 Share Posted June 7, 2014 Because of double & TRIPLE posting of the same questions I'm posting this. Credits should all be there sorry if I forgot anyone. FAQ Install Instructions Credits: +ira http://www.insanelymac.com/forum/topic/298402-os-x-yosemite-dps-builds/page-5?do=findComment&comment=2024283 Scellow http://www.insanelymac.com/forum/topic/298424-boot-guide/?do=findComment&comment=2024426 Marchrius http://www.insanelymac.com/forum/topic/298402-os-x-yosemite-dps-builds/page-16?do=findComment&comment=2025096 iFIRE http://www.insanelymac.com/forum/topic/298402-os-x-yosemite-dps-builds/page-20?do=findComment&comment=2025453 WarDoctor http://www.insanelymac.com/forum/topic/298438-1010-vanilla-bootable-usb-guide/?do=findComment&comment=2024691 Clover Credits: Slice Version 2695 http://www.insanelymac.com/forum/topic/298402-os-x-yosemite-dps-builds/page-20?do=findComment&comment=2025478 Update 2696 http://www.insanelymac.com/forum/topic/298402-os-x-yosemite-dps-builds/page-22?do=findComment&comment=2025590 3rd party kexts DISABLED credits: Netkas & MysticalOS http://www.insanelymac.com/forum/topic/298402-os-x-yosemite-dps-builds/?do=findComment&comment=2024166 AppleHDA with Clover credits: p.H http://www.insanelymac.com/forum/topic/298402-os-x-yosemite-dps-builds/page-29?do=findComment&comment=2026502 TRIM Patch Credits: Marchrius http://www.insanelymac.com/forum/topic/298402-os-x-yosemite-dps-builds/page-31?do=findComment&comment=2026737 Marchrius - Kext version http://www.insanelymac.com/forum/topic/298402-os-x-yosemite-dps-builds/page-26?do=findComment&comment=2026068 OR Allan Oliveira http://www.insanelymac.com/forum/topic/298402-os-x-yosemite-dps-builds/page-29?do=findComment&comment=2026555 Disk Utility - Repair Disk Permissions Credits: Donw35 http://www.insanelymac.com/forum/topic/298402-os-x-yosemite-dps-builds/page-28?do=findComment&comment=2026408 Graphics: Kext no Contents http://www.insanelymac.com/forum/topic/298402-os-x-yosemite-dps-builds/page-25?do=findComment&comment=2025981 11 Link to comment Share on other sites More sharing options...
truemac Posted June 7, 2014 Share Posted June 7, 2014 Ok so I installed Yosemite to my HDD. Whenever I boot my systems gets stuck on this line: kext com.apple.driver.applemobiledevice 303009000 is in exception list, allowing to load I left the computer overnight and I saw no progress in the morning. Any thoughts? Did you get 10.10 working on your z77-ds3h? I have one and cant seem to get it? Use Ozmosis! Link to comment Share on other sites More sharing options...
rishaan Posted June 7, 2014 Share Posted June 7, 2014 Use Ozmosis! What is Ozmosis? Link to comment Share on other sites More sharing options...
rafikwood Posted June 7, 2014 Share Posted June 7, 2014 Any help please this after installation i reboot i put flags and i get this error any help? Link to comment Share on other sites More sharing options...
Pike R. Alpha Posted June 7, 2014 Share Posted June 7, 2014 Good news for Chameleon fans. I located the reboot in the kernel, so you should soon be able to boot Yosemite with Chameleon! See my request for data here. Thank you for helping! 5 Link to comment Share on other sites More sharing options...
Bruxo Posted June 8, 2014 Share Posted June 8, 2014 any help? Remove the kext through another system! S/L/E Link to comment Share on other sites More sharing options...
Recommended Posts