MNSiw Posted June 8, 2014 Share Posted June 8, 2014 Intel DH61WW ALC892, front and rare out working excellent but both mic are not working, I'm on Yosemite DP1, any solution / idea? Link to comment Share on other sites More sharing options...
Slice Posted June 8, 2014 Share Posted June 8, 2014 Intel DH61WW ALC892, front and rare out working excellent but both mic are not working, I'm on Yosemite DP1, any solution / idea? It is usual for VoodooHDA to tune nodes configs according to manuals. Link to comment Share on other sites More sharing options...
MNSiw Posted June 9, 2014 Share Posted June 9, 2014 It is usual for VoodooHDA to tune nodes configs according to manuals. Sorry Slice, but I didn't get it, is it fixable doing something to config of VoodooHDA? If yes, please share link from where I can get some help. Thanks Solved: It was BIOS setting problem. Link to comment Share on other sites More sharing options...
Slice Posted June 11, 2014 Share Posted June 11, 2014 Sorry Slice, but I didn't get it, is it fixable doing something to config of VoodooHDA? If yes, please share link from where I can get some help. Thanks Solved: It was BIOS setting problem. Main thread with instructions here Link to comment Share on other sites More sharing options...
Agostino9446 Posted June 14, 2014 Share Posted June 14, 2014 I tried to install voodohda but i'havent audio...it show only the 3 way of motherboard sound but i need hdmi sound...because i have an ati 7870 plugged by hdmi cable to my monitor...please help me Link to comment Share on other sites More sharing options...
Slice Posted June 16, 2014 Share Posted June 16, 2014 I tried to install voodohda but i'havent audio...it show only the 3 way of motherboard sound but i need hdmi sound...because i have an ati 7870 plugged by hdmi cable to my monitor...please help me May be DarwinDumper report will give us a little more info about your problem? Link to comment Share on other sites More sharing options...
bmas Posted June 16, 2014 Share Posted June 16, 2014 Thank you for the great job! After years of trying AppleHDA with no luck, now I have a sound from my ALC888! Just want to ask for one question. I use voodoohda from the first post. My green rear output is broken (only left channel is playing) .... so is it possible and how to configure in voodoohda, my BlackRear to be with the Green Rear config (so the "master/main stereo sound" to come out from BlackRear). I try to put my speakers in BlackRear, voodoohda detect it, but no sound .. In Windows I make 5.1 configuration on my system and the sound plays from the BlackRear output..., but I dont know how to procedure here... Thank you .. PS: Here is example - How to remap / retasking Realtek onboard jacks / ports I set Pin15 to 04 00 00 00 and now I have Black Output like RearGreen(FrontSpeakers).. Link to comment Share on other sites More sharing options...
Slice Posted June 17, 2014 Share Posted June 17, 2014 Make a report by a command ./getdump >getdump.tst getdump.zip Link to comment Share on other sites More sharing options...
bmas Posted June 17, 2014 Share Posted June 17, 2014 Make a report by a command ./getdump >getdump.tst Here is the result: getdump.tst.zip Link to comment Share on other sites More sharing options...
Slice Posted June 17, 2014 Share Posted June 17, 2014 Here is the result: getdump.tst.zip See nid 20 0x01014010 as 1 seq 0 Line-out Jack 1/8 Rear External Green misc 0 nid 21 0x01011012 as 1 seq 2 Line-out Jack 1/8 Rear External Black misc 0 nid 22 0x01016011 as 1 seq 1 Line-out Jack 1/8 Rear External Orange misc 0 nid 23 0x01012014 as 1 seq 4 Line-out Jack 1/8 Rear External Grey misc 0 nid 24 0x01a19830 as 3 seq 0 Microphone Jack 1/8 Rear External Pink misc 4 nid 25 0x02a19840 as 4 seq 0 Microphone Jack 1/8 Front External Pink misc 4 nid 26 0x0181303f as 3 seq 15 Line-in Jack 1/8 Rear External Blue misc 0 nid 27 0x02214020 as 2 seq 0 Headphones Jack 1/8 Front External Green misc 0 nid 20 (Green Rear) and 21 (Black Rear) are in the same association 1 and works in Sound prefPane as the same device. You have to plug a jack in one socket and get a sound from it namely. Link to comment Share on other sites More sharing options...
bmas Posted June 17, 2014 Share Posted June 17, 2014 Have to.. but there is no sound .. I conncet the Speakers in Rear Black, but in PrefPane has just RearGreen option and whatever I do .. there is no sound from the black output .. There is sound from Rear Green .. but the socket is broken (just left channel work).. From this nids seems like the Orange and Greay will do the same .. but theres is sound just from Green Rear jack ... When I conncect the speakers in Rear Black .. in Settings -> Sound .. the system detect that Rear Black output is conncected .. I can move the sound slider .. but as I say there is no sound .. If I increase InputGain .. there is just noise in speakers but no sound .. Link to comment Share on other sites More sharing options...
Slice Posted June 17, 2014 Share Posted June 17, 2014 Increase Imix decrease Igain Set verbose level to 1 and see system.log when inputting jack Link to comment Share on other sites More sharing options...
bmas Posted June 17, 2014 Share Posted June 17, 2014 This is when I input the jack to Rear Green: 2014-06-17 14:40:00 +0300 kernel[0]: Pin sense: cad 0 nid=21 res=0 2014-06-17 14:40:00 +0300 kernel[0]: setDesc change description Line-out (Green Rear) channel 0 assoc 0 2014-06-17 14:40:02 +0300 kernel[0]: Pin sense: cad 0 nid=20 res=1 2014-06-17 14:40:02 +0300 kernel[0]: setDesc change description Line-out (Green Rear) channel 0 assoc 0 2014-06-17 14:40:36 +0300 kernel[0]: Pin sense: cad 0 nid=20 res=0 2014-06-17 14:40:36 +0300 kernel[0]: setDesc change description Line-out (Green Rear) channel 0 assoc 0 This is in Rear Black: 2014-06-17 14:41:04 +0300 kernel[0]: Pin sense: cad 0 nid=21 res=1 2014-06-17 14:41:04 +0300 kernel[0]: setDesc change description Line-out (Black Rear) channel 0 assoc 0 Increase Imix decrease Igain Set verbose level to 1 and see system.log when inputting jack Link to comment Share on other sites More sharing options...
mahdi-kazemi Posted June 17, 2014 Share Posted June 17, 2014 (edited) Hi guys, I had the same device working on Lion with VoodooHDA 2.7.2, But in Mavericks i get this. (Attached screenshot) I also injected my Device and Vendor ID inside Info.plist still nothing. Also here is my Info.plist text <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>BuildMachineOSBuild</key> <string>12E55</string> <key>CFBundleDevelopmentRegion</key> <string>English</string> <key>CFBundleExecutable</key> <string>VoodooHDA</string> <key>CFBundleIdentifier</key> <string>org.voodoo.driver.VoodooHDA</string> <key>CFBundleInfoDictionaryVersion</key> <string>6.0</string> <key>CFBundleName</key> <string>VoodooHDA</string> <key>CFBundlePackageType</key> <string>KEXT</string> <key>CFBundleShortVersionString</key> <string>2.8.4</string> <key>CFBundleSignature</key> <string>????</string> <key>CFBundleVersion</key> <string>2.8.4</string> <key>DTCompiler</key> <string>com.apple.compilers.llvmgcc42</string> <key>DTPlatformBuild</key> <string>4H1003</string> <key>DTPlatformVersion</key> <string>GM</string> <key>DTSDKBuild</key> <string>12E55</string> <key>DTSDKName</key> <string></string> <key>DTXcode</key> <string>0462</string> <key>DTXcodeBuild</key> <string>4H1003</string> <key>IOKitPersonalities</key> <dict> <key>VoodooHDA</key> <dict> <key>AllowMSI</key> <true/> <key>Boost</key> <integer>2</integer> <key>CFBundleIdentifier</key> <string>org.voodoo.driver.VoodooHDA</string> <key>IOClass</key> <string>VoodooHDADevice</string> <key>IOMatchCategory</key> <string>VoodooHDADevice</string> <key>IOPCIPrimaryMatch</key> <string>0x80863B56</string> <key>IOProviderClass</key> <string>IOPCIDevice</string> <key>IOUserClientClass</key> <string>VoodooHDAUserClient</string> <key>InhibitCache</key> <false/> <key>MixerValues</key> <dict> <key>PCM</key> <integer>90</integer> <key>Rec</key> <integer>70</integer> <key>iGain</key> <integer>0</integer> <key>iMix</key> <integer>0</integer> </dict> <key>NodesToPatch</key> <array/> <key>Noise</key> <integer>0</integer> <key>Vectorize</key> <true/> <key>VoodooHDAEnableHalfMicVolumeFix</key> <false/> <key>VoodooHDAEnableHalfVolumeFix</key> <false/> <key>VoodooHDAEnableMuteFix</key> <false/> <key>VoodooHDAEnableVolumeChangeFix</key> <false/> <key>VoodooHDAVerboseLevel</key> <integer>0</integer> </dict> <key>VoodooHDA-HDMI</key> <dict> <key>AllowMSI</key> <true/> <key>Boost</key> <integer>2</integer> <key>CFBundleIdentifier</key> <string>org.voodoo.driver.VoodooHDA</string> <key>IOClass</key> <string>VoodooHDADevice</string> <key>IOMatchCategory</key> <string>VoodooHDADevice</string> <key>IOPCIPrimaryMatch</key> <string>0x1002AA38</string> <key>IOProviderClass</key> <string>IOPCIDevice</string> <key>IOUserClientClass</key> <string>VoodooHDAUserClient</string> <key>InhibitCache</key> <false/> <key>MixerValues</key> <dict> <key>PCM</key> <integer>90</integer> <key>Rec</key> <integer>70</integer> <key>iGain</key> <integer>0</integer> <key>iMix</key> <integer>0</integer> </dict> <key>NodesToPatch</key> <array/> <key>Noise</key> <integer>0</integer> <key>Vectorize</key> <true/> <key>VoodooHDAEnableHalfMicVolumeFix</key> <false/> <key>VoodooHDAEnableHalfVolumeFix</key> <false/> <key>VoodooHDAEnableMuteFix</key> <false/> <key>VoodooHDAEnableVolumeChangeFix</key> <false/> <key>VoodooHDAVerboseLevel</key> <integer>0</integer> </dict> </dict> <key>OSBundleLibraries</key> <dict> <key>com.apple.iokit.IOAudioFamily</key> <string>1.1fc9</string> <key>com.apple.iokit.IOPCIFamily</key> <string>2.1</string> <key>com.apple.kpi.iokit</key> <string>9.0.0</string> <key>com.apple.kpi.libkern</key> <string>9.0.0</string> <key>com.apple.kpi.mach</key> <string>9.0.0</string> <key>com.apple.kpi.unsupported</key> <string>9.0.0</string> </dict> </dict> </plist> Thanks in advance. EDIT : I got it working i had <key>IOPCIPrimaryMatch</key> <string>0x80863B56</string> wrong. It should have been like <key>IOPCIPrimaryMatch</key> <string>0x3B568086</string> Edited June 18, 2014 by mahdi-kazemi Link to comment Share on other sites More sharing options...
bmas Posted June 18, 2014 Share Posted June 18, 2014 @Slice, do you find a solution .. All outputs except RearGreen and FronGreen .. has just noise .. and no sound .. In system log seems like they are all working like RearGreen ... but they arent .. Can you make .. all other than RearGreen Line-outs (or just RearBlack) to work/plays with Headphones association - 2 .. Link to comment Share on other sites More sharing options...
Slice Posted June 18, 2014 Share Posted June 18, 2014 @Slice, do you find a solution .. All outputs except RearGreen and FronGreen .. has just noise .. and no sound .. In system log seems like they are all working like RearGreen ... but they arent .. Can you make .. all other than RearGreen Line-outs (or just RearBlack) to work/plays with Headphones association - 2 .. move imix slider Link to comment Share on other sites More sharing options...
bmas Posted June 18, 2014 Share Posted June 18, 2014 move imix slider Already done it .. Nothing happen .. still just noise in all outputs, except RearGreen and FrontGreen (Headphones).. Link to comment Share on other sites More sharing options...
bmas Posted June 18, 2014 Share Posted June 18, 2014 I done it, 100% working ports .. ins and outs Thanks to authors for this perfect and only solution for my ALC888 v1000001.. Get these Nodes to Patch: <array> <dict> <key>Codec</key> <integer>0</integer> <key>Config</key> <string>0x40f000f0</string> <key>Node</key> <integer>28</integer> </dict> <dict> <key>Codec</key> <integer>0</integer> <key>Config</key> <string>0x40f000f0</string> <key>Node</key> <integer>29</integer> </dict> <dict> <key>Codec</key> <integer>0</integer> <key>Config</key> <string>0x01014010</string> <key>Node</key> <integer>20</integer> </dict> <dict> <key>Codec</key> <integer>0</integer> <key>Config</key> <string>0x01011070</string> <key>Node</key> <integer>21</integer> </dict> <dict> <key>Codec</key> <integer>0</integer> <key>Config</key> <string>0x01016080</string> <key>Node</key> <integer>22</integer> </dict> <dict> <key>Codec</key> <integer>0</integer> <key>Config</key> <string>0x01012090</string> <key>Node</key> <integer>23</integer> </dict> <dict> <key>Codec</key> <integer>0</integer> <key>Config</key> <string>0x01214020</string> <key>Node</key> <integer>27</integer> </dict> <dict> <key>Codec</key> <integer>0</integer> <key>Config</key> <string>0x40f000f0</string> <key>Node</key> <integer>30</integer> </dict> <dict> <key>Codec</key> <integer>0</integer> <key>Config</key> <string>0x40f000f0</string> <key>Node</key> <integer>31</integer> </dict> </array> .... From HERE.. (Analogue codec 0) .. and apply them to 2.8.5 Now I`ve got just this error when repair kext and permissions: ... and VoodooHDASettingsLoader.app seems to be useless for me: .. I apply my settings to prefpane .. but after restart, they are lost .. even with VoodooHDASettingsLoader.app in LoginItems.. Link to comment Share on other sites More sharing options...
bmas Posted June 20, 2014 Share Posted June 20, 2014 @Slice, how to fix the message that the extension is not from identified developer .. Seems like when I changed info.plist .. that happen .. Link to comment Share on other sites More sharing options...
newmy51 Posted June 26, 2014 Share Posted June 26, 2014 chris1111's package solved literally weeks of contradictory, complicated instructions from assorted sites, fora and irc channels. i could kiss you. many, many, many thanks, chris1111, Slice and AnV Link to comment Share on other sites More sharing options...
chris1111 Posted June 27, 2014 Share Posted June 27, 2014 chris1111's package solved literally weeks of contradictory, complicated instructions from assorted sites, fora and irc channels. i could kiss you. many, many, many thanks, chris1111, Slice and AnV Happy for you LOL Link to comment Share on other sites More sharing options...
TimeWalker75a Posted June 28, 2014 Share Posted June 28, 2014 Tried it on my Asus 1201N (MCP79) with ALC269 and was pretty disappointed to find out that: 1. Even though jack sense works when combining speaker+headphones together, the audio doesn't pass through to the headphones. (tested with 2.8.4 and it works, so something broke down the road) 2. For some reason laptop now refuses to sleep, it even maintains HDD activity after being put to sleep The only way I was able to get rid of sound screeching was by setting the Inhibit Cache flag to true. getdump dump -> http://puu.sh/9OnXl/c407aac405.pdf UPD: Similar report from back in the day so the issue appear to persist with MCP79 for the past 4 years. I'm compiling debug to see what happens .. Link to comment Share on other sites More sharing options...
TimeWalker75a Posted June 29, 2014 Share Posted June 29, 2014 So, I've added proper debug to the code (to identify that messages come from VoodooHDA and not just from kernel[0]: - thus I could find them more easily). Upon entering sleep state there's virtually no action happening from VoodooHDA itself. Before sleep I can see node muting and switching when plugging\unplugging jacks. Absolutely no debug log coming from performPowerStateChange routines .. any way to troubleshoot this ? Link to comment Share on other sites More sharing options...
Slice Posted July 2, 2014 Share Posted July 2, 2014 So, I've added proper debug to the code (to identify that messages come from VoodooHDA and not just from kernel[0]: - thus I could find them more easily). Upon entering sleep state there's virtually no action happening from VoodooHDA itself. Before sleep I can see node muting and switching when plugging\unplugging jacks. Absolutely no debug log coming from performPowerStateChange routines .. any way to troubleshoot this ? See here bool VoodooHDADevice::suspend() { .... bool VoodooHDADevice::resume() { Link to comment Share on other sites More sharing options...
Zackptg5 Posted July 3, 2014 Share Posted July 3, 2014 I have the via 1802p in my laptop and the subwoofer links to an out of range widget (3e). As a result, the subwoofer doesn't work. I noticed that it works in ubuntu though and soon found this post: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1045981 Which explains how the ubuntu developers just skipped over that widget entirely and got the subwoofer to work. I've tried patching AppleHDA but it still doesn't work. How can I patch voodoohda so it will skip over this widget? Link to comment Share on other sites More sharing options...
Recommended Posts