dreadkopp Posted February 6, 2014 Share Posted February 6, 2014 Since i managed to get everything running stable i'd like to give a little guide: before i started, i updated my bios to the latest Version 0704. settings are just sata mode -> ahci slep mode -> S3 only Secure Virtualisation -> on i will post screens of my bios to show you the settings i use .... lets get started: 1. extract niresh 10.8.5 .dmg to usb. 2. boot with flag kernel=amd64 root=BaseSystem.dmg . also uncheck USB injection at PCI settings, othewise my keyboard didn't work (bluetooth logitehc thingy) 3. when opening the advanced install-options, uncheck the audio kexts, they gave me kernel panic. Install...this takes about 15 mins. when installation is finished (with error), don't reboot, open terminal and umount the install-hdd (umount -f /Volumes/whereveryouinstalled) 4 open Disk Utility and repair disk and permissions 5. reboot. boot from usb stick to reach clover, this time bootflags are npci=0x2000 -v -x -s, of course we start from the hdd we installed OSX on. 6. when you reached the single-user bash do 'fsck -f' to repair and fix again. 7. if it is finished 'exit' to boot to graphical mode. 8. you should be granted with welcome screen 9.wait till nireshs post-install stuff finishes...... 10. then install kext for audio: http://www.osx86.net...or-via-vt1708s/ 11. replace mach_kernel in root-directory with this one... it worked for me to escape safe-mode http://www.osx86.net...085-amd-kernel/ the original Kernel seems to not support nvidia GPUs. to do so, open terminal and enter 'sudo chflags nohidden /mach_kernel' to unhide the kernel. copy-paste the new kernel, then hide it again 'sudo chflags hidden /mach_kernel' 12. install clover (http://sourceforge.n.../cloverefiboot/). remeber to disable usb injection to get your input device running 13. enter 'yes > /dev/null' in a terminal to put some load on the cpu in order to get non-crackeling sound or buy a usb soundcard. mine is still on the way, i will report. 14. be happy with your amd hackintosh A screenie of my system to show you it works I still need to figure out howto change the smbios clover is using, since right now the PC is recognized as a MacBookPro, which prevents me from installing nvidia-cuda-drivers, since they are eclusivly for mac pro >3.1 . Network, Graphics Usb3 is working outofthebox! i don't know if firewire works, since i don't have any device using it. All Apps running without problems until now (except iMessage, which gives me a freeze. i can move mouse, but all else is frozen). geekbench+unigine heaven bench: no problem vmware fusion with xp and linux running: no problem seems all pretty stable to me! I hope i could help someone! Happy hacking! Thanx @ niresh for making this distro. without it i would still be stuck on reaching the installer also big thanx to all the people helping me! Link to comment Share on other sites More sharing options...
yo5bdm Posted December 23, 2014 Share Posted December 23, 2014 Thanks for this great little tutorial i have finally managed to install mac on my PC, been trying for 3 days now. have you tried yosemite or mavericks on that system? Link to comment Share on other sites More sharing options...
edneyhelene Posted January 28, 2015 Share Posted January 28, 2015 this is a wonderful tutorial, ill check this wich my samsung RV415...this apu notebook is driving me crazy Link to comment Share on other sites More sharing options...
Recommended Posts