Power management for Sandy/Ivy Bridge/Haswell CPUs

Allan · November 26, 2014

No, is not your mistake. In Real iMacs only get small states too.

Try delete SSDT, and use only -xcpm.

UltraLaser · November 26, 2014

Deleted SSDT.aml and edited config.plist with Mac Pro 3,1 true 6,1 added PState and Cstates in config.

Still remaining 8 and 30

Allan · November 26, 2014

You don't need P e C states and DropOEM.

You need only -xcpm.

Run the script again, and use this value: ./ssdtPRGen.sh -x 1

Put the SSDT generated in right place.

UltraLaser · November 27, 2014

No men, doesn't work

0:100 0:100 MemLog inited, TSC freq: 3005213637

0:100 0:000

0:100 0:000 Now is 27.11.2014, 0:2:29 (GMT+2047)

0:100 0:000 Starting Clover rev 3033 on American Megatrends EFI

0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,2439F926-92AC-4BFA-9A90-A8FAFD728FEF,0x28,0x64000) @B1282118

0:100 0:000 SelfDirPath = \EFI\BOOT

0:100 0:000 Total Memory Slots Count = 2

0:100 0:000 Type 17 Index = 0

0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz

0:100 0:000 SmbiosTable.Type17->Size = 4096MB

0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 DIMM_A1

0:100 0:000 Type 17 Index = 1

0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz

0:100 0:000 SmbiosTable.Type17->Size = 4096MB

0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 DIMM_B1

0:100 0:000 Boot status=0

0:100 0:000 Clover revision: 3033 running on All Series

0:100 0:000 ... with board Z97I-PLUS

0:100 0:000 Clover load options size = 4 bytes

0:100 0:000 Found Plist String = , parse XML in LoadOptions

0:100 0:000 Xml in load options is bad

0:106 0:006 Using OEM config.plist at path: EFI\CLOVER\config.plist

0:106 0:000 EFI\CLOVER\config.plist loaded: Success

0:108 0:002 Found theme applestyle

0:111 0:003 Found theme christmas

0:113 0:002 Found theme NEWYEAR

0:115 0:002 Loading early settings

0:115 0:000 timeout set to 5

0:115 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)

0:115 0:000 KextsToPatch: 3 requested

0:115 0:000 KextToPatch 0: IOAHCIBlockStorage (Trim Patch) Kext bin patch, data len: 11

0:115 0:000 KextToPatch 1: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8

0:115 0:000 KextToPatch 2: IOBluetoothFamily (HandOff Fix) Kext bin patch, data len: 6

0:115 0:000 Default theme: applestyle

0:115 0:000 Hiding entries with string mac_data

0:115 0:000 Hiding entries with string sys_8

0:115 0:000 Hiding entries with string BOOTX64.EFI

0:115 0:000 Hiding entries with string Windows

0:115 0:000 Hiding entries with string just_data

0:115 0:000 LoadDrivers() start

0:117 0:002 Loading EmuVariableUefi-64.efi

0:119 0:001 load image status=Success

0:119 0:000 EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success

0:119 0:000 Loading FSInject-64.efi

0:120 0:001 load image status=Success

0:120 0:000 Loading OsxFatBinaryDrv-64.efi

0:120 0:000 load image status=Success

0:120 0:000 Loading HFSPlus-64.efi

0:122 0:001 load image status=Success

0:122 0:000 - driver needs connecting

0:122 0:000 Loading OsxAptioFix2Drv-64.efi

0:123 0:001 load image status=Success

0:123 0:000 1 drivers needs connecting ...

0:123 0:000 PlatformDriverOverrideProtocol->GetDriver overriden

0:123 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok

0:209 0:086 LoadDrivers() end

0:209 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success

0:215 0:006 SetScreenResolution: 1920x1080 - already set

0:215 0:000 Console modes reported: 4, available modes:

0:215 0:000 Mode 1: 80x25 (current mode)

0:215 0:000 Mode 2: 80x50

0:215 0:000 Mode 3: 100x31

0:215 0:000 Mode 4: 120x28

0:215 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,2439F926-92AC-4BFA-9A90-A8FAFD728FEF,0x28,0x64000)

0:215 0:000 CPU Vendor = 756E6547 Model=306C3

0:215 0:000 The CPU not supported turbo

0:215 0:000 BrandString = Intel® Core i3-4330T CPU @ 3.00GHz

0:215 0:000 MSR 0xE2 before patch 1E000400

0:215 0:000 MSR 0xE4 00021814

0:215 0:000 MSR 0xCE 00080838_F3011E00

0:215 0:000 non-usable FLEX_RATIO = 11E00

0:215 0:000 MSR 0x1B0 00000000

0:215 0:000 FSBFrequency=100MHz DMIvalue=100000kHz

0:215 0:000 Corrected FSBFrequency=100MHz

0:215 0:000 Vendor/Model/Stepping: 0x756E6547/0x3C/0x3

0:215 0:000 Family/ExtFamily: 0x6/0x0

0:215 0:000 MaxDiv/MinDiv: 30.0/8

0:215 0:000 Turbo: 30/30/30/30

0:215 0:000 Features: 0xBFEBFBFF

0:215 0:000 Threads: 4

0:215 0:000 Cores: 2

0:215 0:000 FSB: 100 MHz

0:215 0:000 CPU: 3000 MHz

0:215 0:000 TSC: 3000 MHz

0:215 0:000 PIS: 400 MHz

0:215 0:000 PCI (00|00:00.00) : 8086 0C00 class=060000

0:215 0:000 PCI (00|00:01.00) : 8086 0C01 class=060400

0:215 0:000 PCI (00|00:02.00) : 8086 0412 class=030000

0:215 0:000 Found GFX model=Intel HD Graphics 4600

0:215 0:000 PCI (00|00:03.00) : 8086 0C0C class=040300

0:215 0:000 PCI (00|00:14.00) : 8086 8CB1 class=0C0330

0:215 0:000 PCI (00|00:16.00) : 8086 8CBA class=078000

0:215 0:000 PCI (00|00:16.01) : FFFF FFFF class=FFFFFF

0:215 0:000 PCI (00|00:19.00) : 8086 15A1 class=020000

0:215 0:000 PCI (00|00:1A.00) : 8086 8CAD class=0C0320

0:215 0:000 PCI (00|00:1B.00) : 8086 8CA0 class=040300

0:215 0:000 PCI (00|00:1C.00) : 8086 8C90 class=060400

0:215 0:000 PCI (00|00:1C.03) : 8086 8C96 class=060400

0:215 0:000 PCI (00|03:00.00) : 14E4 43B1 class=028000

0:215 0:000 PCI (00|00:1D.00) : 8086 8CA6 class=0C0320

0:215 0:000 PCI (00|00:1F.00) : 8086 8CC4 class=060100

0:215 0:000 PCI (00|00:1F.02) : 8086 8C82 class=010601

0:215 0:000 PCI (00|00:1F.03) : 8086 8CA2 class=0C0500

0:215 0:000 ScanSPD() start

0:216 0:000 SMBus CmdReg: 0x3

0:216 0:000 Scanning SMBus [8086:8CA2], mmio: 0xF7F38004, ioport: 0xF040, hostc: 0x11

0:230 0:014 SPD[0]: Type 11 @0x50

0:239 0:008 Found module with XMP version 1.3XMP Profile1: 10*1/8ns

0:239 0:000 Using XMP Profile1 instead of standard frequency 1600MHz

0:239 0:000 DDR speed 1600MHz

0:239 0:000 Slot: 0 Type 24 4096MB 1600MHz Vendor=Kingston PartNo=KHX1600C9D34GX SerialNo=060D02090109060D

0:259 0:020 SPD[2]: Type 11 @0x52

0:268 0:008 Found module with XMP version 1.3XMP Profile1: 10*1/8ns

0:268 0:000 Using XMP Profile1 instead of standard frequency 1600MHz

0:268 0:000 DDR speed 1600MHz

0:268 0:000 Slot: 2 Type 24 4096MB 1600MHz Vendor=Kingston PartNo=KHX1600C9D34GX SerialNo=07090208040F0807

0:394 0:126 ScanSPD() end

0:394 0:000 Get Acpi Tables List from RSDT:

0:394 0:000 Found table: FACP A M I len=132

0:394 0:000 Found table: APIC A M I len=114

0:394 0:000 Found table: FPDT A M I len=68

0:394 0:000 Found table: SSDT Ther_Rvp len=3197

0:394 0:000 Found table: SSDT Cpu0Ist len=1337

0:394 0:000 Found table: SSDT CpuSsdt len=2932

0:394 0:000 Found table: MCFG A M I len=60

0:394 0:000 Found table: HPET A M I len=56

0:394 0:000 Found table: SSDT SataTabl len=877

0:394 0:000 Found table: SSDT SaSsdt len=22903

0:394 0:000 Found table: BGRT A M I len=56

0:394 0:000 Calibrated TSC frequency =3005213637 =3005MHz

0:394 0:000 Loading main settings

0:394 0:000 USB FixOwnership: true

0:394 0:000 Dropping 1 tables

0:394 0:000 Drop table 0 signature="DMAR" (52414D44)

0:394 0:000 set table: 52414D44, 0 to drop:

0:394 0:000 Config set ChassisType=0x6

0:394 0:000 found 7 volumes with blockIO

0:394 0:000 0. Volume:

0:394 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)

0:396 0:002 1. Volume:

0:396 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)

0:398 0:002 Result of bootcode detection: bootable unknown (legacy)

0:398 0:000 2. Volume:

0:398 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,2439F926-92AC-4BFA-9A90-A8FAFD728FEF,0x28,0x64000)

0:399 0:000 Result of bootcode detection: bootable unknown (legacy)

0:404 0:005 This is SelfVolume !!

0:404 0:000 3. Volume:

0:404 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,40C7675C-AC93-4ECA-AB95-5BDB35E083C2,0x64028,0xDDFAC40)

0:405 0:000 4. Volume:

0:405 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,58E54DF0-5975-4748-AFCA-3E298AAD3199,0xDE5EC68,0x135F20)

0:405 0:000 5. Volume:

0:405 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,MBR,0x7197BA25,0x800,0xAF000)

0:406 0:000 Result of bootcode detection: bootable Windows (vista,win)

0:406 0:000 6. Volume:

0:406 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,MBR,0x7197BA25,0xAF800,0xDEE4800)

0:406 0:000 Result of bootcode detection: bootable Windows (vista,win)

0:408 0:001 Loading nvram.plist from Vol 'Yosemite' - loaded, size=1601

0:409 0:000 PutNvramPlistToRtVars ...

0:409 0:000 Adding Key: EFIBluetoothDelay: Data: Size = 2: Success

0:409 0:000 Skipping EmuVariableUefiPresent

0:409 0:000 Adding Key: LocationServicesEnabled: Data: Size = 1: Success

0:409 0:000 Adding Key: MyVar: Data: Size = 28: Success

0:409 0:000 Adding Key: SystemAudioVolume: Data: Size = 1: Success

0:409 0:000 Adding Key: SystemAudioVolumeDB: Data: Size = 1: Success

0:409 0:000 Adding Key: bluetoothActiveControllerInfo: Data: Size = 16: Success

0:409 0:000 Adding Key: fmm-computer-name: Data: Size = 14: Success

0:409 0:000 Adding Key: fmm-mobileme-token-FMM: Data: Size = 546: Success

0:409 0:000 Adding Key: prev-lang:kbd: Data: Size = 4: Success

0:409 0:000 Adding Key: security-mode: String: Size = 4, Val = 'none': Success

0:410 0:001 Using theme 'applestyle' (EFI\CLOVER\themes\applestyle)

0:415 0:005 font PTMono_10W.png loaded from themedir

0:415 0:000 Choosing theme applestyle

0:415 0:000 Custom entries start

0:415 0:000 Custom entries finish

0:415 0:000 Scanning loaders...

0:415 0:000 0: 'Whole Disc Boot' no file system

0:415 0:000 1: 'Whole Disc Boot' no file system

0:415 0:000 2: 'EFI'

0:445 0:029 3: 'Yosemite'

0:446 0:001 AddLoaderEntry for Volume Name=Yosemite

0:449 0:002 Check if volume Is Hibernated:

0:449 0:000 Check sleep image 'by signature':

0:453 0:004 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success

0:453 0:000 SleepImage name from pref: ImageVolume = 'Yosemite', ImageName = '\private\var\vm\sleepimage'

0:455 0:002 Reading first 512 bytes of sleepimage ...

0:456 0:000 OurBlockIoRead: Lba=3924990, Offset=724932000 (BlockSize=512)

0:456 0:000 sig lion: F1E0BE9D

0:456 0:000 sig snow: 0

0:456 0:000 no valid sleep image offset was found

0:456 0:000 Reading completed -> Success

0:456 0:000 sleepimage offset could not be acquired

0:456 0:000 hibernated: no - sign

0:480 0:024 4: 'Recovery HD'

0:481 0:000 AddLoaderEntry for Volume Name=Recovery HD

0:505 0:023 5: 'Riservato per il sistema'

0:523 0:018 6: ''

0:541 0:018 Custom legacy start

0:541 0:000 Custom legacy end

0:541 0:000 Scanning legacy ...

0:541 0:000 0: 'Whole Disc Boot' (legacy) not legacy

0:541 0:000 1: 'Whole Disc Boot' (legacy) not legacy

0:541 0:000 2: 'EFI' (legacy) not legacy

0:541 0:000 3: 'Yosemite' (legacy) not legacy

0:541 0:000 4: 'Recovery HD' (legacy) not legacy

0:541 0:000 5: 'Riservato per il sistema' (vista,win) add legacy

0:544 0:003 added 'Boot Windows from Riservato per il sistema' OSType=2 Icon=vista,win

0:544 0:000 6: '' (vista,win) add legacy

0:546 0:001 added 'Boot Windows from ' OSType=2 Icon=vista,win

0:546 0:000 Custom tool start

0:546 0:000 Custom tool end

0:548 0:001 found tool \EFI\CLOVER\tools\Shell64U.efi

0:548 0:000 Checking EFI partition Volume 2 for Clover

0:549 0:000 Found Clover

0:549 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored

0:552 0:003 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success

0:559 0:006 GetEfiBootDeviceFromNvram: efi-boot-device-data not found

0:559 0:000 EfiBootVolume not found

0:559 0:000 found entry 0. 'Boot Mac OS X from Yosemite', Volume 'Yosemite', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,40C7675C-AC93-4ECA-AB95-5BDB35E083C2,0x64028,0xDDFAC40)\System\Library\CoreServices\boot.efi'

0:559 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored

0:559 0:000 DefaultIndex=0 and MainMenu.EntryCount=10

1:047 0:488 Found Mouse device:

1:049 0:001 GUI ready

4:197 3:148 adding to menu BGRT (54524742) A M I (49204D2041) L=56(0x38)

4:197 0:000 adding to menu SSDT (54445353) SaSsdt (20746473536153) L=22903(0x5977)

4:197 0:000 adding to menu SSDT (54445353) SataTabl (6C62615461746153) L=877(0x36D)

4:197 0:000 adding to menu HPET (54455048) A M I (49204D2041) L=56(0x38)

4:197 0:000 adding to menu MCFG (4746434D) A M I (49204D2041) L=60(0x3C)

4:197 0:000 adding to menu SSDT (54445353) CpuSsdt (74647353757043) L=2932(0xB74)

4:197 0:000 adding to menu SSDT (54445353) Cpu0Ist (74734930757043) L=1337(0x539)

4:197 0:000 adding to menu SSDT (54445353) Ther_Rvp (7076525F72656854) L=3197(0xC7D)

4:197 0:000 adding to menu FPDT (54445046) A M I (49204D2041) L=68(0x44)

4:197 0:000 adding to menu APIC (43495041) A M I (49204D2041) L=114(0x72)

4:197 0:000 adding to menu FACP (50434146) A M I (49204D2041) L=132(0x84)

15:657 11:459 Boot option Boot0000 not found

15:657 0:000 StartLoader() start

15:657 0:000 Finally: Bus=100173kHz CPU=3005MHz

15:657 0:000 Kernel and Kext Patches:

15:657 0:000 Allowed: y

15:657 0:000 Debug: n

15:657 0:000 KernelCpu: n

15:657 0:000 Lapic: n

15:657 0:000 AICPUPM: n

15:657 0:000 AppleRTC: n

15:657 0:000 KernelPm: n

15:657 0:000 FakeCPUID: 0x0

15:657 0:000 ATIController: <null string>

15:657 0:000 ATIDataLength: 0

15:657 0:000 0 Kexts to load

15:657 0:000 3 Kexts to patch

15:657 0:000 KextPatch[0]: 11 bytes, IOAHCIBlockStorage

15:657 0:000 KextPatch[1]: 8 bytes, AppleAHCIPort

15:657 0:000 KextPatch[2]: 6 bytes, IOBluetoothFamily

15:657 0:000 Loading boot.efi

15:662 0:004 load image status=Success

15:730 0:068 GetOSVersion: : 10.10.1

15:730 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success

15:737 0:006 insert table 9 for dev 19:0

15:737 0:000 insert table 9 for dev 0:0

15:738 0:001 Detected alternating SMBIOS channel banks

15:738 0:000 Channels: 2

15:738 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23

15:738 0:000 SMBIOS Type 17 Index = 0 => 0 0:

15:738 0:000 BANK0 DIMM0 1600MHz 4096MB

15:738 0:000 mTotalSystemMemory = 4096

15:738 0:000 SMBIOS Type 17 Index = 1 => 1 2:

15:738 0:000 BANK1 DIMM0 1600MHz 4096MB

15:738 0:000 mTotalSystemMemory = 8192

15:738 0:000 SMBIOS Type 17 Index = 2 => 2 1:

15:738 0:000 BANK0 DIMM1 EMPTY

15:738 0:000 SMBIOS Type 17 Index = 3 => 3 3:

15:738 0:000 BANK1 DIMM1 EMPTY

15:738 0:000 NumberOfMemoryDevices = 4

15:738 0:000 Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000

15:738 0:000 Type20[1]->End = 0x7FFFFF, Type17[1] = 0x3000

15:738 0:000 Table 131 is present, CPUType=10

15:738 0:000 Change to: 905

15:738 0:000 RSDT 0xBCB2E028

15:738 0:000 FADT from RSDT: 0xBCB2E110

15:738 0:000 XSDT 0xBCB2E080

15:738 0:000 FADT from XSDT: 0xBCB3CC70

15:738 0:000 Xsdt reallocation done

15:738 0:000 old FADT length=10C

15:738 0:000 Found OperationRegion(GNVS, SystemMemory, BCD64A98, ...)

15:739 0:000 Found OperationRegion(PNVA, SystemMemory, BCD65D98, ...)

15:739 0:000 Found OperationRegion(RCRB, SystemMemory, 0, ...)

15:739 0:000 Found OperationRegion(XHCP, SystemMemory, 0, ...)

15:739 0:000 Found OperationRegion(MCA1, SystemMemory, 0, ...)

15:739 0:000 Found OperationRegion(PSCA, SystemMemory, 0, ...)

15:739 0:000 Found OperationRegion(MCA1, SystemMemory, 0, ...)

15:739 0:000 Found OperationRegion(RPAC, SystemMemory, 0, ...)

15:739 0:000 Found OperationRegion(EPAC, SystemMemory, 0, ...)

15:739 0:000 Found OperationRegion(CPSB, SystemMemory, BCB27E98, ...)

15:739 0:000 Found OperationRegion(MBAR, SystemMemory, 0, ...)

15:739 0:000 Found OperationRegion(XHCN, SystemMemory, 0, ...)

15:739 0:000 Found OperationRegion(RAMW, SystemMemory, BCD50018, ...)

15:739 0:000 Found OperationRegion(TMMB, SystemMemory, FED40000, ...)

15:739 0:000 Found OperationRegion(RAMX, SystemMemory, BCD65C18, ...)

15:741 0:001 DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml

15:742 0:001 page is allocated, write DSDT into

15:742 0:000 Apply DsdtFixMask=0x00000000 old way

15:742 0:000 drop _DSM mask=0x0000

15:742 0:000 ========= Auto patch DSDT Starting ========

15:742 0:000 VideoCard devID=0x4128086

15:742 0:000 DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE

15:742 0:000 USBADR[0] = 0x140000 and PCIe = 0xFFFE

15:742 0:000 USBADR[1] = 0x1A0000 and PCIe = 0xFFFE

15:851 0:108 Found Airport BCM at 0x1C0003, 0x0

15:851 0:000 USBADR[2] = 0x1D0000 and PCIe = 0xFFFE

15:851 0:000 first CPU found at 89F7 offset 89FA

15:851 0:000 score candidate at 89F3

15:851 0:000 score inserted in acpi_cpu_score _PR_

15:851 0:000 Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7

within the score: _PR_

15:852 0:000 Found PCIROOTUID = 0

15:852 0:000 ========= Auto patch DSDT Finished ========

15:852 0:000 Patch table: SSDT Ther_Rvp

15:852 0:000 SSDT len = 0xC7D

15:852 0:000 Patch table: SSDT Cpu0Ist

15:852 0:000 SSDT len = 0x539

15:852 0:000 Patch table: SSDT CpuSsdt

15:852 0:000 SSDT len = 0xB74

15:852 0:000 Patch table: SSDT SataTabl

15:852 0:000 SSDT len = 0x36D

15:852 0:000 Patch table: SSDT SaSsdt

15:852 0:000 SSDT len = 0x5977

15:852 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0

15:852 0:000 Xsdt has tables count=11

15:852 0:000 corrected XSDT length=124

15:852 0:000 Inserting SSDT.aml from EFI\CLOVER\ACPI\patched ... Success

15:854 0:002 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=4

15:854 0:000 EdidDiscovered size=128

15:854 0:000 00 | 00 FF FF FF FF FF FF 00 04 69 E1 24 01 01 01 01

15:854 0:000 16 | 10 17 01 03 80 35 1E 78 EA 9D E5 A6 54 54 9F 26

15:854 0:000 32 | 0D 50 54 B7 EF 00 71 4F 81 80 81 40 81 C0 81 00

15:854 0:000 48 | 95 00 B3 00 01 01 02 3A 80 18 71 38 2D 40 58 2C

15:854 0:000 64 | 45 00 13 2B 21 00 00 1E 00 00 00 FD 00 32 96 1E

15:854 0:000 80 | A0 21 00 0A 20 20 20 20 20 20 00 00 00 FC 00 56

15:854 0:000 96 | 47 32 34 38 0A 20 20 20 20 20 20 20 00 00 00 FF

15:854 0:000 112 | 00 44 34 4C 4D 51 53 30 35 37 35 35 37 0A 01 FB

15:854 0:000 Intel Intel HD Graphics 4600 [8086:0412] :: PciRoot(0x0)\Pci(0x2,0x0)

15:854 0:000 Intel GFX revision =0x6

15:854 0:000 USB Controller [8086:8CB1] :: PciRoot(0x0)\Pci(0x14,0x0)

15:854 0:000 LAN Controller [8086:15A1] :: PciRoot(0x0)\Pci(0x19,0x0)

15:854 0:000 USB Controller [8086:8CAD] :: PciRoot(0x0)\Pci(0x1A,0x0)

15:854 0:000 USB Controller [8086:8CA6] :: PciRoot(0x0)\Pci(0x1D,0x0)

15:855 0:000 stringlength = 2722

15:855 0:000 CurrentMode: Width=1920 Height=1080

15:855 0:000 FSInjection: using kexts path: 'EFI\CLOVER\kexts\10.10'

15:856 0:001 ** Warning: Your MLB is not suitable for iMessage(must be 17 chars long) !

15:856 0:000 MSR 0x1B0 set to 00000000

15:856 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.10

15:860 0:003 Extra kext: EFI\CLOVER\kexts\10.10\AppleIGB.kext

15:868 0:007 Extra kext: EFI\CLOVER\kexts\10.10\bcm4352.kext

15:870 0:002 Extra kext: EFI\CLOVER\kexts\10.10\BTFirmwareUploader.kext

15:906 0:035 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\BTFirmwareUploader.kext\Contents\PlugIns\BluetoothDevInfo.kext

15:909 0:003 Extra kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext

15:915 0:005 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext\Contents\PlugIns\ACPISensors.kext

15:919 0:004 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext\Contents\PlugIns\CPUSensors.kext

15:924 0:005 Extra kext: EFI\CLOVER\kexts\10.10\AppleIntelE1000e.kext

15:932 0:007 Extra kext: EFI\CLOVER\kexts\10.10\AppleHDA.kext

15:951 0:019 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\AppleHDA.kext\Contents\PlugIns\AppleHDAController.kext

15:956 0:005 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\AppleHDA.kext\Contents\PlugIns\AppleHDAHardwareConfigDriver.kext

15:961 0:004 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\AppleHDA.kext\Contents\PlugIns\AppleMikeyDriver.kext

15:966 0:005 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\AppleHDA.kext\Contents\PlugIns\DspFuncLib.kext

15:981 0:015 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\AppleHDA.kext\Contents\PlugIns\IOHDAFamily.kext

15:995 0:013 Removed efi-boot-device-data variable: Not Found

15:995 0:000 Custom boot screen not used because entry has unset use graphics

15:995 0:000 Closing log

Still remain 8 and 30

Allan · November 27, 2014

Ok.

Why you use AppleIGB.kext and BTFirmwareUploader.kext?

You apply some patchs in DSDT or not?

Use this config: config.plist.zip

Send me your SSDT.

UltraLaser · November 27, 2014

Ok.

Why you use AppleIGB.kext and BTFirmwareUploader.kext?

You apply some patchs in DSDT or not?

Use this config: config.plist.zip

Send me your SSDT.

AppleIGB and BTFirmwareUploaser is used for my wireless+bluetooth combo

With your config:

DSDT is extracted on linux live and editet with MacIASL; I apply only audio patch

SSDT.aml.zip

Allan · November 27, 2014

Ok.

Use DropOEM only.

And the video card, you use Intel HD 4600?

chriz74 · November 27, 2014

As far as I can understand if your bios is unlocked you don't have to patch the kernel. If you are using hd4600 graphics apply the toledo patch. Read my guide on how I got a fully working system on sandy bridge.

http://www.hackintoshosx.com/topic/22520-guide-brief-guide-to-clover-efi-yosemite-on-asus-p8h67-v-sandy-bridge-hd3000-igpu/

UltraLaser · November 27, 2014

Ok.

Use DropOEM only.

And the video card, you use Intel HD 4600?

Yes, i use the integrated gpu : HD4600 with fake id 0x0d228086.

I can boot only with "DROP ALL OEM SSDT" set to no -> "[ ]";

If i set to yes ->[+]" the system still blocking here

As far as I can understand if your bios is unlocked you don't have to patch the kernel. If you are using hd4600 graphics apply the toledo patch. Read my guide on how I got a fully working system on sandy bridge.

http://www.hackintoshosx.com/topic/22520-guide-brief-guide-to-clover-efi-yosemite-on-asus-p8h67-v-sandy-bridge-hd3000-igpu/

I confirm that my bios is unlocked because it support the "CFG Lock"

I not need the toledo patch, I inject the fake id 0x0d228086 (so i have working QE CI)

Allan · November 27, 2014

As far as I can understand if your bios is unlocked you don't have to patch the kernel. If you are using hd4600 graphics apply the toledo patch. Read my guide on how I got a fully working system on sandy bridge.

http://www.hackintoshosx.com/topic/22520-guide-brief-guide-to-clover-efi-yosemite-on-asus-p8h67-v-sandy-bridge-hd3000-igpu/

This makes no sense, is why we have created a patch.

[GUIDE] Patching the kernel for Haswell CPUs, XCPM early reboot

Yes, i use the integrated gpu : HD4600 with fake id 0x0d228086.

I can boot only with "DROP ALL OEM SSDT" set to no -> "[ ]";

If i set to yes ->[+]" the system still blocking here

Ok. Still using DropOEM disable, is the right for you now.

Please run this 2 commands in Terminal, and put the result here:

cat /var/log/system.log | grep 'IOPPF:'

sudo dmesg

chriz74 · November 27, 2014

Yes, i use the integrated gpu : HD4600 with fake id 0x0d228086.

I can boot only with "DROP ALL OEM SSDT" set to no -> "[ ]";

If i set to yes ->[+]" the system still blocking here

I confirm that my bios is unlocked because it support the "CFG Lock"

I not need the toledo patch, I inject the fake id 0x0d228086 (so i have working QE CI)

The Toledo patch enables hdmi audio and igpu support directly from dsdt (bios) without then needing an inject. The aim is to get rid of patched kexts if possibile and injections. If you don't get a kp you don't need to patch the kernel for power management

UltraLaser · November 27, 2014

 cat /var/log/system.log | grep 'IOPPF:'
Nov 27 00:02:04 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 00:06:51 fatezs-iMac kernel[0]: NTFS volume name , version 3.1.IOPPF: XCPM mode
Nov 27 00:10:55 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 00:13:46 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 00:15:40 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 00:17:26 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 00:20:11 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 00:25:46 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 00:28:29 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 00:32:15 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 00:34:26 fatezs-iMac kernel[0]: hfs: mounted Recovery HD on device disk1s3IOPPF: XCPM mode
Nov 27 00:37:38 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 00:39:56 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 00:48:56 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 00:59:41 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 01:02:50 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 01:06:22 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 01:08:33 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 01:10:26 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 01:19:02 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 10:53:48 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 11:22:44 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 11:32:44 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 11:34:58 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 11:36:49 fatezs-iMac kernel[0]: IOPPF: XCPM mode
Nov 27 12:05:17 fatezs-iMac kernel[0]: IOPPF: XCPM mode

In dmesg i have only the last n line

sudo dmesg

96000, region 0x7fff92200000->0x7fff92400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.

[bNBTrackpadDevice::init][85.3] init is complete

BUG in process suhelperd[279]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)

[bNBTrackpadDevice::handleStart][85.3] returning 1

[AppleMultitouchHIDEventDriver::start] entered

BUG in process suhelperd[279]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)

[AppleMultitouchDevice::start] entered

utun_ctl_connect: creating interface utun0

utun_start: ifnet_disable_output returned error 12

Google Chrome He (map: 0xffffff801efea780) triggered DYLD shared region unnest for map: 0xffffff801efea780, region 0x7fff92200000->0x7fff92400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.

Google Chrome He (map: 0xffffff801f97bc30) triggered DYLD shared region unnest for map: 0xffffff801f97bc30, region 0x7fff92200000->0x7fff92400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.

Google Chrome He (map: 0xffffff801f97b5a0) triggered DYLD shared region unnest for map: 0xffffff801f97b5a0, region 0x7fff92200000->0x7fff92400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.

Google Chrome He (map: 0xffffff8020058a50) triggered DYLD shared region unnest for map: 0xffffff8020058a50, region 0x7fff92200000->0x7fff92400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.

Google Chrome He (map: 0xffffff8020058e10) triggered DYLD shared region unnest for map: 0xffffff8020058e10, region 0x7fff92200000->0x7fff92400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.

Google Chrome He (map: 0xffffff8020058d20) triggered DYLD shared region unnest for map: 0xffffff8020058d20, region 0x7fff92200000->0x7fff92400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.

BUG in process suhelperd[279]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)

IO80211AWDLPeerManager::doMonitorTimer(): Disabling AWDL due to no services and idle link.

Google Chrome He (map: 0xffffff801e2423c0) triggered DYLD shared region unnest for map: 0xffffff801e2423c0, region 0x7fff92200000->0x7fff92400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.

chriz74 · November 27, 2014

This makes no sense, is why we have created a patch. [GUIDE] Patching the kernel for Haswell CPUs, XCPM early reboot

Ok. Still using DropOEM disable, is the right for you now.

Please run this 2 commands in Terminal, and put the result here:
cat /var/log/system.log | grep 'IOPPF:'
sudo dmesg

Pikeralpha confirms on his blog that if you have an unlocked bios you don't need to patch the kernel. Infact I suspect that you lose pm functionality by patching. If the bios is unlocked the system can dialogate with the motherboard through ssdt and dsdt.

UltraLaser · November 27, 2014

Pikeralpha confirms on his blog that if you have an unlocked bios you don't need to patch the kernel. Infact I suspect that you lose pm functionality by patching. If the bios is unlocked the system can dialogate with the motherboard through ssdt and dsdt.

Ok thanks.

i try to restore my kernel-backup and remove the patch inside clover

chriz74 · November 27, 2014

Ok thanks.

i try to restore my kernel-backup and remove the patch inside clover

what patch do you have in clover?

UltraLaser · November 27, 2014

For kernel i've used this :

Note that in 10.10 kernel directory was changed. Copy this perl code is for 10.10 version, put line by line
sudo perl -pi -e 's|\xe2\x00\x00\x00\x02\x00\x00\x00|\x00\x00\x00\x00\x02\x00\x00\x00|g' kernel
sudo perl -pi -e 's|\xe2\x00\x00\x00\x4c\x00\x00\x00|\x00\x00\x00\x00\x4c\x00\x00\x00|g' kernel
sudo perl -pi -e 's|\xe2\x00\x00\x00\x90\x01\x00\x00|\x00\x00\x00\x00\x90\x01\x00\x00|g' kernel

for clover i've tryed this :

<key>KernelAndKextPatches</key>
<dict>
<key>KernelPm</key>
        <true/>
</dict>

But at this moment i've removed the clover "patch" and restored the native kernel (my backup) and still have 8 and 30 pstates

look the latest Clover - BootLog

0:100 0:100 MemLog inited, TSC freq: 3005211957

0:100 0:000

0:100 0:000 Now is 27.11.2014, 17:31:16 (GMT+2047)

0:100 0:000 Starting Clover rev 3033 on American Megatrends EFI

0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,2439F926-92AC-4BFA-9A90-A8FAFD728FEF,0x28,0x64000) @B1282098

0:100 0:000 SelfDirPath = \EFI\BOOT

0:100 0:000 Total Memory Slots Count = 2

0:100 0:000 Type 17 Index = 0

0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz

0:100 0:000 SmbiosTable.Type17->Size = 4096MB

0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 DIMM_A1

0:100 0:000 Type 17 Index = 1

0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz

0:100 0:000 SmbiosTable.Type17->Size = 4096MB

0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 DIMM_B1

0:100 0:000 Boot status=0

0:100 0:000 Clover revision: 3033 running on All Series

0:100 0:000 ... with board Z97I-PLUS

0:100 0:000 Clover load options size = 4 bytes

0:100 0:000 Found Plist String = , parse XML in LoadOptions

0:100 0:000 Xml in load options is bad

0:106 0:006 Using OEM config.plist at path: EFI\CLOVER\config.plist

0:106 0:000 EFI\CLOVER\config.plist loaded: Success

0:108 0:002 Found theme applestyle

0:111 0:003 Found theme christmas

0:113 0:002 Found theme NEWYEAR

0:115 0:002 Loading early settings

0:115 0:000 timeout set to 5

0:115 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)

0:115 0:000 KextsToPatch: 3 requested

0:115 0:000 KextToPatch 0: IOBluetoothFamily (HandOff Fix) Kext bin patch, data len: 6

0:115 0:000 KextToPatch 1: IOAHCIBlockStorage (Trim Patch) Kext bin patch, data len: 11

0:115 0:000 KextToPatch 2: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8

0:115 0:000 Default theme: applestyle

0:115 0:000 Hiding entries with string just_data

0:115 0:000 Hiding entries with string Windows

0:115 0:000 Hiding entries with string BOOTX64.EFI

0:115 0:000 Hiding entries with string mac_data

0:115 0:000 Hiding entries with string sys_8

0:115 0:000 LoadDrivers() start

0:117 0:002 Loading EmuVariableUefi-64.efi

0:119 0:001 load image status=Success

0:119 0:000 EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success

0:119 0:000 Loading FSInject-64.efi

0:120 0:001 load image status=Success

0:120 0:000 Loading OsxFatBinaryDrv-64.efi

0:120 0:000 load image status=Success

0:120 0:000 Loading HFSPlus-64.efi

0:122 0:001 load image status=Success

0:122 0:000 - driver needs connecting

0:122 0:000 Loading OsxAptioFix2Drv-64.efi

0:123 0:001 load image status=Success

0:123 0:000 1 drivers needs connecting ...

0:123 0:000 PlatformDriverOverrideProtocol->GetDriver overriden

0:123 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok

0:208 0:085 LoadDrivers() end

0:208 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success

0:214 0:006 SetScreenResolution: 1920x1080 - already set

0:214 0:000 Console modes reported: 4, available modes:

0:214 0:000 Mode 1: 80x25 (current mode)

0:214 0:000 Mode 2: 80x50

0:214 0:000 Mode 3: 100x31

0:214 0:000 Mode 4: 120x28

0:214 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,2439F926-92AC-4BFA-9A90-A8FAFD728FEF,0x28,0x64000)

0:214 0:000 CPU Vendor = 756E6547 Model=306C3

0:214 0:000 The CPU not supported turbo

0:214 0:000 BrandString = Intel® Core i3-4330T CPU @ 3.00GHz

0:214 0:000 MSR 0xE2 before patch 1E000400

0:214 0:000 MSR 0xE4 00021814

0:214 0:000 MSR 0xCE 00080838_F3011E00

0:214 0:000 non-usable FLEX_RATIO = 11E00

0:214 0:000 MSR 0x1B0 00000000

0:214 0:000 FSBFrequency=100MHz DMIvalue=100000kHz

0:214 0:000 Corrected FSBFrequency=100MHz

0:214 0:000 Vendor/Model/Stepping: 0x756E6547/0x3C/0x3

0:214 0:000 Family/ExtFamily: 0x6/0x0

0:214 0:000 MaxDiv/MinDiv: 30.0/8

0:214 0:000 Turbo: 30/30/30/30

0:214 0:000 Features: 0xBFEBFBFF

0:214 0:000 Threads: 4

0:214 0:000 Cores: 2

0:214 0:000 FSB: 100 MHz

0:214 0:000 CPU: 3000 MHz

0:214 0:000 TSC: 3000 MHz

0:214 0:000 PIS: 400 MHz

0:214 0:000 PCI (00|00:00.00) : 8086 0C00 class=060000

0:214 0:000 PCI (00|00:01.00) : 8086 0C01 class=060400

0:214 0:000 PCI (00|00:02.00) : 8086 0412 class=030000

0:214 0:000 Found GFX model=Intel HD Graphics 4600

0:214 0:000 PCI (00|00:03.00) : 8086 0C0C class=040300

0:214 0:000 PCI (00|00:14.00) : 8086 8CB1 class=0C0330

0:214 0:000 PCI (00|00:16.00) : 8086 8CBA class=078000

0:214 0:000 PCI (00|00:16.01) : FFFF FFFF class=FFFFFF

0:214 0:000 PCI (00|00:19.00) : 8086 15A1 class=020000

0:214 0:000 PCI (00|00:1A.00) : 8086 8CAD class=0C0320

0:214 0:000 PCI (00|00:1B.00) : 8086 8CA0 class=040300

0:214 0:000 PCI (00|00:1C.00) : 8086 8C90 class=060400

0:214 0:000 PCI (00|00:1C.03) : 8086 8C96 class=060400

0:214 0:000 PCI (00|03:00.00) : 14E4 43B1 class=028000

0:214 0:000 PCI (00|00:1D.00) : 8086 8CA6 class=0C0320

0:214 0:000 PCI (00|00:1F.00) : 8086 8CC4 class=060100

0:214 0:000 PCI (00|00:1F.02) : 8086 8C82 class=010601

0:214 0:000 PCI (00|00:1F.03) : 8086 8CA2 class=0C0500

0:214 0:000 ScanSPD() start

0:214 0:000 SMBus CmdReg: 0x3

0:214 0:000 Scanning SMBus [8086:8CA2], mmio: 0xF7F38004, ioport: 0xF040, hostc: 0x11

0:229 0:014 SPD[0]: Type 11 @0x50

0:237 0:008 Found module with XMP version 1.3XMP Profile1: 10*1/8ns

0:237 0:000 Using XMP Profile1 instead of standard frequency 1600MHz

0:237 0:000 DDR speed 1600MHz

0:237 0:000 Slot: 0 Type 24 4096MB 1600MHz Vendor=Kingston PartNo=KHX1600C9D34GX SerialNo=060D02090109060D

0:258 0:020 SPD[2]: Type 11 @0x52

0:266 0:008 Found module with XMP version 1.3XMP Profile1: 10*1/8ns

0:266 0:000 Using XMP Profile1 instead of standard frequency 1600MHz

0:266 0:000 DDR speed 1600MHz

0:266 0:000 Slot: 2 Type 24 4096MB 1600MHz Vendor=Kingston PartNo=KHX1600C9D34GX SerialNo=07090208040F0807

0:393 0:126 ScanSPD() end

0:393 0:000 Get Acpi Tables List from RSDT:

0:393 0:000 Found table: FACP A M I len=132

0:393 0:000 Found table: APIC A M I len=114

0:393 0:000 Found table: FPDT A M I len=68

0:393 0:000 Found table: SSDT Ther_Rvp len=3197

0:393 0:000 Found table: SSDT Cpu0Ist len=1337

0:393 0:000 Found table: SSDT CpuSsdt len=2932

0:393 0:000 Found table: MCFG A M I len=60

0:393 0:000 Found table: HPET A M I len=56

0:393 0:000 Found table: SSDT SataTabl len=877

0:393 0:000 Found table: SSDT SaSsdt len=22903

0:393 0:000 Found table: BGRT A M I len=56

0:393 0:000 Calibrated TSC frequency =3005211957 =3005MHz

0:393 0:000 Loading main settings

0:393 0:000 USB FixOwnership: true

0:393 0:000 Dropping 1 tables

0:393 0:000 Drop table 0 signature="DMAR" (52414D44)

0:393 0:000 set table: 52414D44, 0 to drop:

0:393 0:000 Config set ChassisType=0xD

0:393 0:000 found 7 volumes with blockIO

0:393 0:000 0. Volume:

0:393 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)

0:395 0:002 1. Volume:

0:395 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)

0:397 0:002 Result of bootcode detection: bootable unknown (legacy)

0:397 0:000 2. Volume:

0:397 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,2439F926-92AC-4BFA-9A90-A8FAFD728FEF,0x28,0x64000)

0:397 0:000 Result of bootcode detection: bootable unknown (legacy)

0:402 0:005 This is SelfVolume !!

0:402 0:000 3. Volume:

0:402 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,40C7675C-AC93-4ECA-AB95-5BDB35E083C2,0x64028,0xDDFAC40)

0:403 0:000 4. Volume:

0:403 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,58E54DF0-5975-4748-AFCA-3E298AAD3199,0xDE5EC68,0x135F20)

0:403 0:000 5. Volume:

0:404 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,MBR,0x7197BA25,0x800,0xAF000)

0:404 0:000 Result of bootcode detection: bootable Windows (vista,win)

0:404 0:000 6. Volume:

0:404 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,MBR,0x7197BA25,0xAF800,0xDEE4800)

0:405 0:000 Result of bootcode detection: bootable Windows (vista,win)

0:406 0:001 Loading nvram.plist from Vol 'Yosemite' - loaded, size=1601

0:407 0:000 PutNvramPlistToRtVars ...

0:407 0:000 Adding Key: EFIBluetoothDelay: Data: Size = 2: Success

0:407 0:000 Skipping EmuVariableUefiPresent

0:407 0:000 Adding Key: LocationServicesEnabled: Data: Size = 1: Success

0:407 0:000 Adding Key: MyVar: Data: Size = 28: Success

0:407 0:000 Adding Key: SystemAudioVolume: Data: Size = 1: Success

0:407 0:000 Adding Key: SystemAudioVolumeDB: Data: Size = 1: Success

0:407 0:000 Adding Key: bluetoothActiveControllerInfo: Data: Size = 16: Success

0:407 0:000 Adding Key: fmm-computer-name: Data: Size = 14: Success

0:407 0:000 Adding Key: fmm-mobileme-token-FMM: Data: Size = 546: Success

0:407 0:000 Adding Key: prev-lang:kbd: Data: Size = 4: Success

0:407 0:000 Adding Key: security-mode: String: Size = 4, Val = 'none': Success

0:408 0:001 Using theme 'applestyle' (EFI\CLOVER\themes\applestyle)

0:413 0:004 font PTMono_10W.png loaded from themedir

0:413 0:000 Choosing theme applestyle

0:413 0:000 Custom entries start

0:413 0:000 Custom entries finish

0:413 0:000 Scanning loaders...

0:413 0:000 0: 'Whole Disc Boot' no file system

0:413 0:000 1: 'Whole Disc Boot' no file system

0:413 0:000 2: 'EFI'

0:440 0:026 3: 'Yosemite'

0:441 0:001 AddLoaderEntry for Volume Name=Yosemite

0:444 0:002 Check if volume Is Hibernated:

0:444 0:000 Check sleep image 'by signature':

0:448 0:004 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success

0:448 0:000 SleepImage name from pref: ImageVolume = 'Yosemite', ImageName = '\private\var\vm\sleepimage'

0:450 0:002 Reading first 512 bytes of sleepimage ...

0:451 0:000 OurBlockIoRead: Lba=3924990, Offset=724932000 (BlockSize=512)

0:451 0:000 sig lion: F1E0BE9D

0:451 0:000 sig snow: 0

0:451 0:000 no valid sleep image offset was found

0:451 0:000 Reading completed -> Success

0:451 0:000 sleepimage offset could not be acquired

0:451 0:000 hibernated: no - sign

0:473 0:022 4: 'Recovery HD'

0:473 0:000 AddLoaderEntry for Volume Name=Recovery HD

0:495 0:021 5: 'Riservato per il sistema'

0:513 0:018 6: ''

0:532 0:018 Custom legacy start

0:532 0:000 Custom legacy end

0:532 0:000 Scanning legacy ...

0:532 0:000 0: 'Whole Disc Boot' (legacy) not legacy

0:532 0:000 1: 'Whole Disc Boot' (legacy) not legacy

0:532 0:000 2: 'EFI' (legacy) not legacy

0:532 0:000 3: 'Yosemite' (legacy) not legacy

0:532 0:000 4: 'Recovery HD' (legacy) not legacy

0:532 0:000 5: 'Riservato per il sistema' (vista,win) add legacy

0:535 0:003 added 'Boot Windows from Riservato per il sistema' OSType=2 Icon=vista,win

0:535 0:000 6: '' (vista,win) add legacy

0:536 0:001 added 'Boot Windows from ' OSType=2 Icon=vista,win

0:536 0:000 Custom tool start

0:536 0:000 Custom tool end

0:538 0:001 found tool \EFI\CLOVER\tools\Shell64U.efi

0:538 0:000 Checking EFI partition Volume 2 for Clover

0:539 0:000 Found Clover

0:540 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored

0:543 0:003 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success

0:549 0:006 GetEfiBootDeviceFromNvram: efi-boot-device-data not found

0:549 0:000 EfiBootVolume not found

0:549 0:000 found entry 0. 'Boot Mac OS X from Yosemite', Volume 'Yosemite', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,40C7675C-AC93-4ECA-AB95-5BDB35E083C2,0x64028,0xDDFAC40)\System\Library\CoreServices\boot.efi'

0:549 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored

0:549 0:000 DefaultIndex=0 and MainMenu.EntryCount=10

1:031 0:481 Found Mouse device:

1:032 0:001 GUI ready

4:154 3:121 adding to menu BGRT (54524742) A M I (49204D2041) L=56(0x38)

4:154 0:000 adding to menu SSDT (54445353) SaSsdt (20746473536153) L=22903(0x5977)

4:154 0:000 adding to menu SSDT (54445353) SataTabl (6C62615461746153) L=877(0x36D)

4:154 0:000 adding to menu HPET (54455048) A M I (49204D2041) L=56(0x38)

4:154 0:000 adding to menu MCFG (4746434D) A M I (49204D2041) L=60(0x3C)

4:154 0:000 adding to menu SSDT (54445353) CpuSsdt (74647353757043) L=2932(0xB74)

4:154 0:000 adding to menu SSDT (54445353) Cpu0Ist (74734930757043) L=1337(0x539)

4:154 0:000 adding to menu SSDT (54445353) Ther_Rvp (7076525F72656854) L=3197(0xC7D)

4:154 0:000 adding to menu FPDT (54445046) A M I (49204D2041) L=68(0x44)

4:154 0:000 adding to menu APIC (43495041) A M I (49204D2041) L=114(0x72)

4:154 0:000 adding to menu FACP (50434146) A M I (49204D2041) L=132(0x84)

14:082 9:927 Boot option Boot0000 not found

14:082 0:000 StartLoader() start

14:082 0:000 Finally: Bus=100173kHz CPU=3005MHz

14:082 0:000 Kernel and Kext Patches:

14:082 0:000 Allowed: y

14:082 0:000 Debug: n

14:082 0:000 KernelCpu: n

14:082 0:000 Lapic: n

14:082 0:000 AICPUPM: n

14:082 0:000 AppleRTC: y

14:082 0:000 KernelPm: n

14:082 0:000 FakeCPUID: 0x0

14:082 0:000 ATIController: <null string>

14:082 0:000 ATIDataLength: 0

14:082 0:000 0 Kexts to load

14:082 0:000 3 Kexts to patch

14:082 0:000 KextPatch[0]: 6 bytes, IOBluetoothFamily

14:082 0:000 KextPatch[1]: 11 bytes, IOAHCIBlockStorage

14:082 0:000 KextPatch[2]: 8 bytes, AppleAHCIPort

14:082 0:000 Loading boot.efi

14:086 0:004 load image status=Success

14:155 0:068 GetOSVersion: : 10.10.1

14:155 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success

14:162 0:006 insert table 9 for dev 19:0

14:162 0:000 insert table 9 for dev 0:0

14:162 0:000 Detected alternating SMBIOS channel banks

14:162 0:000 Channels: 2

14:162 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23

14:162 0:000 SMBIOS Type 17 Index = 0 => 0 0:

14:162 0:000 BANK0 DIMM0 1600MHz 4096MB

14:162 0:000 mTotalSystemMemory = 4096

14:162 0:000 SMBIOS Type 17 Index = 1 => 1 2:

14:162 0:000 BANK1 DIMM0 1600MHz 4096MB

14:162 0:000 mTotalSystemMemory = 8192

14:162 0:000 SMBIOS Type 17 Index = 2 => 2 1:

14:162 0:000 BANK0 DIMM1 EMPTY

14:162 0:000 SMBIOS Type 17 Index = 3 => 3 3:

14:162 0:000 BANK1 DIMM1 EMPTY

14:163 0:000 NumberOfMemoryDevices = 4

14:163 0:000 Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000

14:163 0:000 Type20[1]->End = 0x7FFFFF, Type17[1] = 0x3000

14:163 0:000 Table 131 is present, CPUType=10

14:163 0:000 Change to: 905

14:163 0:000 RSDT 0xBCB2E028

14:163 0:000 FADT from RSDT: 0xBCB2E110

14:163 0:000 XSDT 0xBCB2E080

14:163 0:000 FADT from XSDT: 0xBCB3CC70

14:163 0:000 Xsdt reallocation done

14:163 0:000 old FADT length=10C

14:163 0:000 Found OperationRegion(GNVS, SystemMemory, BCD64A98, ...)

14:163 0:000 Found OperationRegion(PNVA, SystemMemory, BCD65D98, ...)

14:163 0:000 Found OperationRegion(RCRB, SystemMemory, 0, ...)

14:163 0:000 Found OperationRegion(XHCP, SystemMemory, 0, ...)

14:163 0:000 Found OperationRegion(MCA1, SystemMemory, 0, ...)

14:163 0:000 Found OperationRegion(PSCA, SystemMemory, 0, ...)

14:163 0:000 Found OperationRegion(MCA1, SystemMemory, 0, ...)

14:163 0:000 Found OperationRegion(RPAC, SystemMemory, 0, ...)

14:163 0:000 Found OperationRegion(EPAC, SystemMemory, 0, ...)

14:163 0:000 Found OperationRegion(CPSB, SystemMemory, BCB27E98, ...)

14:163 0:000 Found OperationRegion(MBAR, SystemMemory, 0, ...)

14:163 0:000 Found OperationRegion(XHCN, SystemMemory, 0, ...)

14:163 0:000 Found OperationRegion(RAMW, SystemMemory, BCD50018, ...)

14:163 0:000 Found OperationRegion(TMMB, SystemMemory, FED40000, ...)

14:163 0:000 Found OperationRegion(RAMX, SystemMemory, BCD65C18, ...)

14:165 0:001 DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml

14:166 0:001 page is allocated, write DSDT into

14:166 0:000 Apply DsdtFixMask=0x00000000 old way

14:166 0:000 drop _DSM mask=0x0000

14:166 0:000 ========= Auto patch DSDT Starting ========

14:166 0:000 VideoCard devID=0x4128086

14:166 0:000 DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE

14:166 0:000 USBADR[0] = 0x140000 and PCIe = 0xFFFE

14:166 0:000 USBADR[1] = 0x1A0000 and PCIe = 0xFFFE

14:275 0:108 Found Airport BCM at 0x1C0003, 0x0

14:275 0:000 USBADR[2] = 0x1D0000 and PCIe = 0xFFFE

14:275 0:000 first CPU found at 89F7 offset 89FA

14:275 0:000 score candidate at 89F3

14:275 0:000 score inserted in acpi_cpu_score _PR_

14:275 0:000 Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7

within the score: _PR_

14:275 0:000 Found PCIROOTUID = 0

14:276 0:000 ========= Auto patch DSDT Finished ========

14:276 0:000 Patch table: SSDT Ther_Rvp

14:276 0:000 SSDT len = 0xC7D

14:276 0:000 Patch table: SSDT Cpu0Ist

14:276 0:000 SSDT len = 0x539

14:276 0:000 Patch table: SSDT CpuSsdt

14:276 0:000 SSDT len = 0xB74

14:276 0:000 Patch table: SSDT SataTabl

14:276 0:000 SSDT len = 0x36D

14:276 0:000 Patch table: SSDT SaSsdt

14:276 0:000 SSDT len = 0x5977

14:276 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0

14:276 0:000 Xsdt has tables count=11

14:276 0:000 corrected XSDT length=124

14:276 0:000 Inserting SSDT.aml from EFI\CLOVER\ACPI\patched ... Success

14:278 0:002 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=4

14:278 0:000 Maximum control=0x1E

14:278 0:000 P-States: min 0x8, max 0x1E

14:278 0:000 SSDT with CPU P-States generated successfully

14:278 0:000 SSDT with CPU C-States generated successfully

14:278 0:000 EdidDiscovered size=128

14:278 0:000 00 | 00 FF FF FF FF FF FF 00 04 69 E1 24 01 01 01 01

14:278 0:000 16 | 10 17 01 03 80 35 1E 78 EA 9D E5 A6 54 54 9F 26

14:278 0:000 32 | 0D 50 54 B7 EF 00 71 4F 81 80 81 40 81 C0 81 00

14:278 0:000 48 | 95 00 B3 00 01 01 02 3A 80 18 71 38 2D 40 58 2C

14:278 0:000 64 | 45 00 13 2B 21 00 00 1E 00 00 00 FD 00 32 96 1E

14:278 0:000 80 | A0 21 00 0A 20 20 20 20 20 20 00 00 00 FC 00 56

14:278 0:000 96 | 47 32 34 38 0A 20 20 20 20 20 20 20 00 00 00 FF

14:278 0:000 112 | 00 44 34 4C 4D 51 53 30 35 37 35 35 37 0A 01 FB

14:278 0:000 Intel Intel HD Graphics 4600 [8086:0412] :: PciRoot(0x0)\Pci(0x2,0x0)

14:278 0:000 Intel GFX revision =0x6

14:278 0:000 USB Controller [8086:8CB1] :: PciRoot(0x0)\Pci(0x14,0x0)

14:278 0:000 LAN Controller [8086:15A1] :: PciRoot(0x0)\Pci(0x19,0x0)

14:278 0:000 USB Controller [8086:8CAD] :: PciRoot(0x0)\Pci(0x1A,0x0)

14:279 0:000 USB Controller [8086:8CA6] :: PciRoot(0x0)\Pci(0x1D,0x0)

14:279 0:000 stringlength = 2722

14:279 0:000 CurrentMode: Width=1920 Height=1080

14:279 0:000 FSInjection: using kexts path: 'EFI\CLOVER\kexts\10.10'

14:280 0:001 ** Warning: Your MLB is not suitable for iMessage(must be 17 chars long) !

14:280 0:000 MSR 0x1B0 set to 00000000

14:280 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.10

14:284 0:003 Extra kext: EFI\CLOVER\kexts\10.10\AppleIGB.kext

14:292 0:007 Extra kext: EFI\CLOVER\kexts\10.10\bcm4352.kext

14:294 0:002 Extra kext: EFI\CLOVER\kexts\10.10\BTFirmwareUploader.kext

14:330 0:035 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\BTFirmwareUploader.kext\Contents\PlugIns\BluetoothDevInfo.kext

14:333 0:003 Extra kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext

14:339 0:005 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext\Contents\PlugIns\ACPISensors.kext

14:343 0:004 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext\Contents\PlugIns\CPUSensors.kext

14:348 0:005 Extra kext: EFI\CLOVER\kexts\10.10\AppleIntelE1000e.kext

14:356 0:007 Extra kext: EFI\CLOVER\kexts\10.10\AppleHDA.kext

14:375 0:019 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\AppleHDA.kext\Contents\PlugIns\AppleHDAController.kext

14:380 0:005 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\AppleHDA.kext\Contents\PlugIns\AppleHDAHardwareConfigDriver.kext

14:385 0:004 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\AppleHDA.kext\Contents\PlugIns\AppleMikeyDriver.kext

14:390 0:005 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\AppleHDA.kext\Contents\PlugIns\DspFuncLib.kext

14:405 0:015 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\AppleHDA.kext\Contents\PlugIns\IOHDAFamily.kext

14:419 0:013 Removed efi-boot-device-data variable: Not Found

14:419 0:000 Custom boot screen not used because entry has unset use graphics

14:419 0:000 Closing log

I think that Clover read these two values (cpu info 8-30) somewhere.

Allan · November 27, 2014

Pikeralpha confirms on his blog that if you have an unlocked bios you don't need to patch the kernel. Infact I suspect that you lose pm functionality by patching. If the bios is unlocked the system can dialogate with the motherboard through ssdt and dsdt.

Nice, now you have XCPM power management.

And use Clover Kernel Patch.

Remove the Clover SMBios, and let Clover generate for you.

Use AppleIntelInfo for verify if you have all states enabled.

UltraLaser · November 27, 2014

Doesn't work

now i have only 8 e 30 and sometimes

"P States: method failed, exiting 0xE00002CA"

or

"P States: I/O error, throttling to 1Hz"

Log form AppleIntelInfo:

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: logMSRs............................: 1

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: logIGPU............................: 1

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: logCStates.........................: 1

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: logIPGStyle........................: 1

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MWAIT C-States.....................: 270624

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_CORE_THREAD_COUNT......(0x35) : 0x20004

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PLATFORM_INFO..........(0xCE) : 0x80838F3011E00

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PMG_CST_CONFIG_CONTROL.(0xE2) : 0x1E000005

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PMG_IO_CAPTURE_BASE....(0xE4) : 0x21814

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IA32_MPERF.................(0xE7) : 0x15FA55B09A

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IA32_APERF.................(0xE8) : 0x15A3534009

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_FLEX_RATIO.............(0x194) : 0x11E00

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_IA32_PERF_STATUS.......(0x198) : 0x1E5B00001E00

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_IA32_PERF_CONTROL......(0x199) : 0x1E00

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IA32_CLOCK_MODULATION......(0x19A) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IA32_THERM_STATUS..........(0x19C) : 0x882D0000

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IA32_MISC_ENABLES..........(0x1A0) : 0x850089

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400001

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x1E1E1E1E

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x5

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_POWER_CTL..............(0x1FC) : 0x4005F

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_RAPL_POWER_UNIT........(0x606) : 0xA0E03

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PKG_POWER_LIMIT........(0x610) : 0x42FFF8001AFFF8

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PKG_ENERGY_STATUS......(0x611) : 0x37ABC6

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PKGC3_IRTL.............(0x60a) : 0x8842

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PKGC6_IRTL.............(0x60b) : 0x8873

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PKGC7_IRTL.............(0x60c) : 0x8891

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x10141400001FFF

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PP0_POWER_LIMIT........(0x638) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PP0_ENERGY_STATUS......(0x639) : 0x178BE9

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PP0_POLICY.............(0x63a) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PP1_POWER_LIMIT........(0x640) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PP1_ENERGY_STATUS......(0x641) : 0xE9CE

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PP1_POLICY.............(0x642) : 0x18

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_CONFIG_TDP_NOMINAL.....(0x648) : 0x1E

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_CONFIG_TDP_LEVEL1......(0x649) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_CONFIG_TDP_LEVEL2......(0x64a) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_CONFIG_TDP_CONTROL.....(0x64b) : 0x80000000

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_TURBO_ACTIVATION_RATIO.(0x64c) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU Low Frequency Mode.............: 800 MHz

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU Maximum non-Turbo Frequency....: 3000 MHz

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU Maximum Turbo Frequency........: 3000 MHz

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IGPU Current Frequency.............: 200 MHz

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IGPU Minimum Frequency.............: 200 MHz

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IGPU Maximum Non-Turbo Frequency...: 200 MHz

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IGPU Maximum Turbo Frequency.......: 1150 MHz

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IGPU Maximum limit.................: No Limit

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU P-States [ (8) 29 30 ] iGPU P-States [ (4) ]

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 3 ]

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU C7-Cores [ 0 2 3 ]

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 ]

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU C7-Cores [ 0 1 2 3 ]

Nov 27 20:33:12 fatezs-iMac kernel[0]: AICPUPMI: CPU P-States [ (8) 21 29 30 ] iGPU P-States [ (4) ]

Nov 27 20:33:13 fatezs-iMac kernel[0]: AICPUPMI: CPU P-States [ (8) 21 27 29 30 ] iGPU P-States [ (4) ]

Nov 27 20:33:13 fatezs-iMac kernel[0]: AICPUPMI: CPU P-States [ (8) 21 22 27 29 30 ] iGPU P-States [ (4) ]

Nov 27 20:33:14 fatezs-iMac kernel[0]: AICPUPMI: CPU P-States [ (8) 20 21 22 27 29 30 ] iGPU P-States [ (4) ]

Nov 27 20:33:15 fatezs-iMac kernel[0]: AICPUPMI: CPU P-States [ 8 20 21 22 27 28 29 (30) ] iGPU P-States [ (4) ]

Nov 27 20:33:15 fatezs-iMac kernel[0]: AICPUPMI: CPU C6-Cores [ 2 3 ]

Nov 27 20:33:26 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ 8 20 21 22 27 28 29 (30) ] iGPU P-States [ 4 (6) ]

Nov 27 20:33:27 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ 8 20 21 22 27 28 29 (30) ] iGPU P-States [ 4 6 (11) ]

Nov 27 20:33:28 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ 8 20 21 22 27 28 29 (30) ] iGPU P-States [ 4 6 (10) 11 ]

Nov 27 20:33:28 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ 8 20 21 22 27 28 29 (30) ] iGPU P-States [ 4 6 (9) 10 11 ]

Nov 27 20:33:42 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 3 ]

Nov 27 20:33:45 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ 8 20 21 22 25 27 28 29 (30) ] iGPU P-States [ (4) 6 9 10 11 ]

Nov 27 20:33:47 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ (8) 20 21 22 25 26 27 28 29 30 ] iGPU P-States [ (4) 6 9 10 11 ]

Nov 27 20:33:49 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ (8) 20 21 22 24 25 26 27 28 29 30 ] iGPU P-States [ (4) 6 9 10 11 ]

Nov 27 20:33:50 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ 8 20 21 22 23 24 25 26 27 28 29 (30) ] iGPU P-States [ (4) 6 9 10 11 ]

Nov 27 20:34:02 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ (8) 17 20 21 22 23 24 25 26 27 28 29 30 ] iGPU P-States [ (4) 6 9 10 11 ]

Nov 27 20:34:04 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ (8) 17 18 20 21 22 23 24 25 26 27 28 29 30 ] iGPU P-States [ (4) 6 9 10 11 ]

Nov 27 20:34:06 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ (8) 10 17 18 20 21 22 23 24 25 26 27 28 29 30 ] iGPU P-States [ (4) 6 9 10 11 ]

Nov 27 20:34:07 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ (8) 10 14 17 18 20 21 22 23 24 25 26 27 28 29 30 ] iGPU P-States [ (4) 6 9 10 11 ]

Nov 27 20:34:15 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ (8) 10 14 17 18 19 20 21 22 23 24 25 26 27 28 29 30 ] iGPU P-States [ (4) 6 9 10 11 ]

chriz74 · November 27, 2014

man you have a lot of kexts loading. What are they for? You should try to patch the dsdt for your hardware and get rid of them. I only have FakeSMC, IOAHCIFamily and realtekALC in my efi partition, all the rest is done through dsdt apart USB 3.0

Allan · November 27, 2014

Doesn't work

now i have only 8 e 30 and sometimes

"P States: method failed, exiting 0xE00002CA"

or

"P States: I/O error, throttling to 1Hz"

Log form AppleIntelInfo:

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: v3.3 Copyright © 2012-2014 Pike R. Alpha. All rights reserved

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: logMSRs............................: 1

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: logIGPU............................: 1

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: logCStates.........................: 1

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: logIPGStyle........................: 1

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MWAIT C-States.....................: 270624

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_CORE_THREAD_COUNT......(0x35) : 0x20004

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PLATFORM_INFO..........(0xCE) : 0x80838F3011E00

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PMG_CST_CONFIG_CONTROL.(0xE2) : 0x1E000005

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PMG_IO_CAPTURE_BASE....(0xE4) : 0x21814

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IA32_MPERF.................(0xE7) : 0x15FA55B09A

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IA32_APERF.................(0xE8) : 0x15A3534009

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_FLEX_RATIO.............(0x194) : 0x11E00

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_IA32_PERF_STATUS.......(0x198) : 0x1E5B00001E00

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_IA32_PERF_CONTROL......(0x199) : 0x1E00

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IA32_CLOCK_MODULATION......(0x19A) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IA32_THERM_STATUS..........(0x19C) : 0x882D0000

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IA32_MISC_ENABLES..........(0x1A0) : 0x850089

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400001

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x1E1E1E1E

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x5

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_POWER_CTL..............(0x1FC) : 0x4005F

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_RAPL_POWER_UNIT........(0x606) : 0xA0E03

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PKG_POWER_LIMIT........(0x610) : 0x42FFF8001AFFF8

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PKG_ENERGY_STATUS......(0x611) : 0x37ABC6

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PKGC3_IRTL.............(0x60a) : 0x8842

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PKGC6_IRTL.............(0x60b) : 0x8873

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PKGC7_IRTL.............(0x60c) : 0x8891

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x10141400001FFF

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PP0_POWER_LIMIT........(0x638) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PP0_ENERGY_STATUS......(0x639) : 0x178BE9

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PP0_POLICY.............(0x63a) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PP1_POWER_LIMIT........(0x640) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PP1_ENERGY_STATUS......(0x641) : 0xE9CE

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PP1_POLICY.............(0x642) : 0x18

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_CONFIG_TDP_NOMINAL.....(0x648) : 0x1E

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_CONFIG_TDP_LEVEL1......(0x649) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_CONFIG_TDP_LEVEL2......(0x64a) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_CONFIG_TDP_CONTROL.....(0x64b) : 0x80000000

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_TURBO_ACTIVATION_RATIO.(0x64c) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU Low Frequency Mode.............: 800 MHz

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU Maximum non-Turbo Frequency....: 3000 MHz

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU Maximum Turbo Frequency........: 3000 MHz

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IGPU Current Frequency.............: 200 MHz

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IGPU Minimum Frequency.............: 200 MHz

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IGPU Maximum Non-Turbo Frequency...: 200 MHz

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IGPU Maximum Turbo Frequency.......: 1150 MHz

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: IGPU Maximum limit.................: No Limit

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU P-States [ (8) 29 30 ] iGPU P-States [ (4) ]

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 3 ]

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU C7-Cores [ 0 2 3 ]

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 ]

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU C7-Cores [ 0 1 2 3 ]

Nov 27 20:33:12 fatezs-iMac kernel[0]: AICPUPMI: CPU P-States [ (8) 21 29 30 ] iGPU P-States [ (4) ]

Nov 27 20:33:13 fatezs-iMac kernel[0]: AICPUPMI: CPU P-States [ (8) 21 27 29 30 ] iGPU P-States [ (4) ]

Nov 27 20:33:13 fatezs-iMac kernel[0]: AICPUPMI: CPU P-States [ (8) 21 22 27 29 30 ] iGPU P-States [ (4) ]

Nov 27 20:33:14 fatezs-iMac kernel[0]: AICPUPMI: CPU P-States [ (8) 20 21 22 27 29 30 ] iGPU P-States [ (4) ]

Nov 27 20:33:15 fatezs-iMac kernel[0]: AICPUPMI: CPU P-States [ 8 20 21 22 27 28 29 (30) ] iGPU P-States [ (4) ]

Nov 27 20:33:15 fatezs-iMac kernel[0]: AICPUPMI: CPU C6-Cores [ 2 3 ]

Nov 27 20:33:26 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ 8 20 21 22 27 28 29 (30) ] iGPU P-States [ 4 (6) ]

Nov 27 20:33:27 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ 8 20 21 22 27 28 29 (30) ] iGPU P-States [ 4 6 (11) ]

Nov 27 20:33:28 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ 8 20 21 22 27 28 29 (30) ] iGPU P-States [ 4 6 (10) 11 ]

Nov 27 20:33:28 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ 8 20 21 22 27 28 29 (30) ] iGPU P-States [ 4 6 (9) 10 11 ]

Nov 27 20:33:42 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 3 ]

Nov 27 20:33:45 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ 8 20 21 22 25 27 28 29 (30) ] iGPU P-States [ (4) 6 9 10 11 ]

Nov 27 20:33:47 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ (8) 20 21 22 25 26 27 28 29 30 ] iGPU P-States [ (4) 6 9 10 11 ]

Nov 27 20:33:49 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ (8) 20 21 22 24 25 26 27 28 29 30 ] iGPU P-States [ (4) 6 9 10 11 ]

Nov 27 20:33:50 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ 8 20 21 22 23 24 25 26 27 28 29 (30) ] iGPU P-States [ (4) 6 9 10 11 ]

Nov 27 20:34:02 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ (8) 17 20 21 22 23 24 25 26 27 28 29 30 ] iGPU P-States [ (4) 6 9 10 11 ]

Nov 27 20:34:04 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ (8) 17 18 20 21 22 23 24 25 26 27 28 29 30 ] iGPU P-States [ (4) 6 9 10 11 ]

Nov 27 20:34:06 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ (8) 10 17 18 20 21 22 23 24 25 26 27 28 29 30 ] iGPU P-States [ (4) 6 9 10 11 ]

Nov 27 20:34:07 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ (8) 10 14 17 18 20 21 22 23 24 25 26 27 28 29 30 ] iGPU P-States [ (4) 6 9 10 11 ]

Nov 27 20:34:15 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU P-States [ (8) 10 14 17 18 19 20 21 22 23 24 25 26 27 28 29 30 ] iGPU P-States [ (4) 6 9 10 11 ]

Good!

You have all states enabled!

Even appearing only 2 or 3 with HWMonitor, this happens because iMacs (real or Hack) shows only small values, but does not mean that you have problems with power management.

UltraLaser · November 27, 2014

Hey Allan

but

AICPUPMI: CPU P-States [ (8) 10 14 17 18 19 20 21 22 23 24 25 26 27 28 29 30 ] iGPU P-States [ (4) 6 9 10 11 ]

are from GPU (HD4600) not cpu (is not it?)

in Cpu sections :

Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 3 ]
Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU C7-Cores [ 0 2 3 ]
Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 ]
Nov 27 20:33:09 localhost kernel[0]: AICPUPMI: CPU C7-Cores [ 0 1 2 3 ]
Nov 27 20:33:42 fatezs-iMac-006 kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 3 ]

I do not understand

Allan · November 28, 2014

This is CPU states:

CPU P-States [ (8) 10 14 17 18 19 20 21 22 23 24 25 26 27 28 29 30 ]

This is iGPU ( HD 4600) states:

iGPU P-States [ (4) 6 9 10 11 ]

In both information, you have the min and max states.

UltraLaser · November 28, 2014

Ohhhh WOW!

finally thank you very much

chriz74 · November 28, 2014

Now analyze your hardware and try to get rid of unnegessary injects and kexts and move control to dsdt

Allan · November 28, 2014

Ohhhh WOW!

finally thank you very much

NP

Power management for Sandy/Ivy Bridge/Haswell CPUs

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites