Power management for Sandy/Ivy Bridge/Haswell CPUs

Allan · November 9, 2014

Remove, and reboot.

And let me know the result.

chriz74 · November 9, 2014

Hello

did you run these commands line by line?
curl -o ~/ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/master/ssdtPRGen.sh
chmod +x ssdtPRGen.sh
./ssdtPRGen.sh
Anyway, set your SMBios for iMac 12,1/12,2 or MacPro 3,1

Yes, rename for SSDT.aml

I didn't patch apple kext correctly, I set imac12,2 however I don't get turbo boost and only p states of 16 and 34. I also have the DSDT but can't seem to be able to enable turbo boost in any way. As for name do you mean "rename to SSDT.aml" ?

Vahids · November 9, 2014

Remove, and reboot.

And let me know the result.

Noting changed :/

Allan · November 9, 2014

In which your system is slow?

Vahids · November 9, 2014

In which your system is slow?

everything, I ran android emulation and It's super slow!

Let me check with NullCPUpowermanagent.kext, I will feedback

I have This error rapidly in System log:

Nov  9 23:13:26 Vahids-MacBook-Pro.local ReportCrash[642]: Removing excessive log: file:///Users/vahid/Library/Logs/DiagnosticReports/SystemUIServer_2014-11-09-230955_Vahids-MacBook-Pro.crash
Nov  9 23:13:33 Vahids-MacBook-Pro.local Spotlight[319]: spot: agent checkin
Nov  9 23:13:33 Vahids-MacBook-Pro kernel[0]: CODE SIGNING: cs_invalid_page(0x1106f8000): p=645[SystemUIServer] final status 0x3000a00, denying page sending SIGKILL
Nov  9 23:13:33 Vahids-MacBook-Pro kernel[0]: CODE SIGNING: process 645[SystemUIServer]: rejecting invalid page at address 0x1106f8000 from offset 0x3d000 in file "/System/Library/PrivateFrameworks/WirelessDiagnosticsSupport.framework/Versions/A/WirelessDiagnosticsSupport" (cs_mtime:1410328030.0 == mtime:1410328030.0) (signed:1 validated:1 tainted:1 wpmapped:0 slid:0)
Nov  9 23:13:34 Vahids-MacBook-Pro com.apple.xpc.launchd[1] (com.apple.SystemUIServer.agent[645]): Binary is improperly signed.
Nov  9 23:13:34 Vahids-MacBook-Pro com.apple.xpc.launchd[1] (com.apple.SystemUIServer.agent): Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
Nov  9 23:13:37 Vahids-MacBook-Pro.local ReportCrash[642]: Saved crash report for SystemUIServer[645] version 1.7 (410) to /Users/vahid/Library/Logs/DiagnosticReports/SystemUIServer_2014-11-09-231337_Vahids-MacBook-Pro.crash
Nov  9 23:13:37 Vahids-MacBook-Pro.local ReportCrash[642]: Removing excessive log: file:///Users/vahid/Library/Logs/DiagnosticReports/SystemUIServer_2014-11-09-231004_Vahids-MacBook-Pro.crash

Is that CPU power manager related ?!

Allan · November 9, 2014

Hmm.

If you have NullCPUPM, delete them.

I never saw this error.

Vahids · November 9, 2014

Hmm.

If you have NullCPUPM, delete them.

I never saw this error.

I put back NullCpupowe... to S/L/E and speed is good now!

Allan · November 9, 2014

You don't need NullCPUPM, but you should use AICPM+SSDT.

Vahids · November 9, 2014

You don't need NullCPUPM, but you should use AICPM+SSDT.

I know about NullCPUPM but with AICPM+SSDT my laptop is slow !

I patched again but noting changed.

+

I have this Error on running script :

System information: Mac OS X 10.10 (14A389)

Brandstring 'Intel® Core i3-3120M CPU @ 2.50GHz'

Scope (_PR_) {220 bytes} with ACPI Processor declarations found in the DSDT (ACPI 1.0 compliant)

Generating ssdt.dsl for a 'MacBookPro8,1' with board-id [Mac-94245B3640C91C81]

Ivy Bridge Core i3-3120M processor [0x306A9] setup [0x0902]

With a maximum TDP of 35 Watt, as specified by Intel

Warning: Low Frequency Mode is 0 (unknown/unconfirmed)

Now using 1200 MHz for Mobile processor

Number logical CPU's: 4 (Core Frequency: 2500 MHz)

Number of Turbo States: 0

Number of P-States: 14 (1200-2500 MHz)

Adjusting C-States for detected (mobile) processor

Injected C-States for CPU0 (C1,C3,C6,C7)

Injected C-States for CPU1 (C1,C2,C3)

Warning: 'cpu-type' may be set improperly (0x0902 instead of 0x0702)

Error: board-id [Mac-94245B3640C91C81] not supported by Ivy Bridge – check SMBIOS data / use the -c option

Do you want to continue (y/n)?

Is it normal ?

I tried to put 2500MHz with 80 TDP

This error:

ssdtPRGen.sh v0.9 Copyright © 2011-2012 by † RevoGirl

v6.6 Copyright © 2013 by † Jeroen

v14.1 Copyright © 2013-2014 by Pike R. Alpha

-----------------------------------------------------------

Bugs > https://github.com/Piker-Alpha/ssdtPRGen.sh/issues <

Error: Invalid argument detected: 2500

Aborting ...

Done

Pimentel · November 9, 2014

Hello

@chriz74 Try use MacPro 3,1 as SMBios to get more P-States

chriz74 · November 10, 2014

Hello

@chriz74 Try use MacPro 3,1 as SMBios to get more P-States

I got some info, I am running OSX Yosemite with an i7-2600k (sandy bridge). I found out AICPM kext is not needed anymore and I deleted it, but obviously I don't have an XCPM working. I use my SSDT and DSDT, the point is turbo boost is not working at all. Any clue?

Allan · November 10, 2014

I know about NullCPUPM but with AICPM+SSDT my laptop is slow !

I patched again but noting changed.

+

I have this Error on running script :

Is it normal ?

I tried to put 2500MHz with 80 TDP

This error:

Use this command:

curl -o ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/master/ssdtPRGen.sh
chmod +x ssdtPRGen.sh
./ssdtPRGen.sh -w 3

Pimentel · November 13, 2014

Hello

I got some info, I am running OSX Yosemite with an i7-2600k (sandy bridge). I found out AICPM kext is not needed anymore and I deleted it, but obviously I don't have an XCPM working. I use my SSDT and DSDT, the point is turbo boost is not working at all. Any clue?

You have Sandy Bridger you CPU need AICPUPM to work... XCPM is only for Ivy and Haswell... forget XCPM

You need make a SSDT+Patch AICPUPM to get power management only this

Jared Taskin · November 14, 2014

Thanks for your hard work PimentelX86.

I'm on Yosemite, with Clover Bootloader, and a Haswell i7 4790K.

Before I did your guide, I was getting three p-states: 8, 40, 44. After doing your guide, I now have 6 but they are: 8, 40, 41, 42, 43, 44.

This is better than before but still not really correct right? I also occasionally get throttling errors. Are those normal?

I'm using Clover Configurator. Do any of these things need to be checked?

Sorry if I haven't given the enough details. Thanks!

chriz74 · November 14, 2014

Hello

You have Sandy Bridger you CPU need AICPUPM to work... XCPM is only for Ivy and Haswell... forget XCPM

You need make a SSDT+Patch AICPUPM to get power management only this

I don't know. While it's true that XCPM doesn't work with sandy bridge it's also true that Yosemite is not using AICPUPM anymore. Infact I deleted these kexts:

ACPI_SMC_PlatformPlugin.kext

AppleIntelCPUPowerManagement.kext

AppleIntelCPUPowerManagementClient.kext

AppleSMBusPCI.kext

NullCPUPowerManagement.kext

and the system is loading normally, I don't get strange errors in log about aicpupm timed out (as I don't have it at all).

Yosemite power management is at kernel level no matter what. Please check this post by pike regarding XNU.

https://pikeralpha.wordpress.com/2013/10/05/xnu-cpu-power-management/

by the way now I moved to clover uefi. Clover recognizes the CPU and turbo states and all, yet I think it's not going over p-state 34.

Allan · November 14, 2014

Thanks for your hard work PimentelX86.

I'm on Yosemite, with Clover Bootloader, and a Haswell i7 4790K.

Before I did your guide, I was getting three p-states: 8, 40, 44. After doing your guide, I now have 6 but they are: 8, 40, 41, 42, 43, 44.

This is better than before but still not really correct right? I also occasionally get throttling errors. Are those normal?

I'm using Clover Configurator. Do any of these things need to be checked?

Sorry if I haven't given the enough details. Thanks!

Clover are generate P and C states for you automatically, check your config.plist

I don't know. While it's true that XCPM doesn't work with sandy bridge it's also true that Yosemite is not using AICPUPM anymore. Infact I deleted these kexts:

ACPI_SMC_PlatformPlugin.kext

AppleIntelCPUPowerManagement.kext

AppleIntelCPUPowerManagementClient.kext

AppleSMBusPCI.kext

NullCPUPowerManagement.kext

and the system is loading normally, I don't get strange errors in log about aicpupm timed out (as I don't have it at all).

Yosemite power management is at kernel level no matter what. Please check this post by pike regarding XNU.

https://pikeralpha.wordpress.com/2013/10/05/xnu-cpu-power-management/

by the way now I moved to clover uefi. Clover recognizes the CPU and turbo states and all, yet I think it's not going over p-state 34.

Yes XNU is used automatically since 10.9.2, but is not necessary you deleted this kexts.

Run this commands in Terminal and put the result here:

cat /var/log/system.log | grep 'IOPPF:'

and

sudo dmesg

chriz74 · November 14, 2014

Clover are generate P and C states for you automatically, check your config.plist

Yes XNU is used automatically since 10.9.2, but is not necessary you deleted this kexts.

Run this commands in Terminal and put the result here:
cat /var/log/system.log | grep 'IOPPF:'
and
sudo dmesg

here you go

HCI/SPT1@1/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/Samsung SSD 840 EVO 120GB Media/IOGUIDPartitionScheme/OSX@2

BSD root: disk0s2, major 1, minor 4

hfs: mounted OSX on device root_device

USBF: 1.120 GenericUSBXHCI::CreateRootHubDevice Bus 14 already taken

VM Swap Subsystem is ON

FireWire (OHCI) VendorID 1106 ID 3044 PCI now active, GUID 2000000003002e32; max speed s400.

USBMSC Identifier (non-unique): 00000000000006 0x48d 0x1336 0x100, 2

USBMSC Identifier (non-unique): 575839314134315332313333 0x1058 0x730 0x1016, 3

IOGraphics flags 0x43

Apple16X50ACPI1: Identified Serial Port on ACPI Device=UAR1

Previous shutdown cause: 5

**** [iOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xd000 ****

com_intel_driver_EnergyDriver[0xffffff80171fde00]::start(0xffffff8014b1ab00)

DSMOS has arrived

[iOBluetoothHCIController][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xd000

[iOBluetoothHCIController][start] -- completed

Sound assertion in AppleHDACodecGeneric at line 366

Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200

IONetworkController::enable

[iOBluetoothHCIController::setConfigState] calling registerService

**** [iOBluetoothHCIController][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0xea00 -- 0x8800 -- 0xd000 ****

NTFS driver 3.12 [Flags: R/W].

NTFS volume name , version 3.1.

NTFS volume name , version 3.1.NTFS volume name , version 3.1.

NTFS-fs warning (device /dev/disk1s4, pid 132): ntfs_system_inodes_get(): Windows is hibernated. Will not be able to remount read-write. Run chkdsk.

NTFS volume name , version 3.1.

NTFS volume name My Passport, version 3.1.

AppleKeyStore:Sending lock change 0 for handle -501

NTFS volume name My Passport, version 3.1.

BUG in process suhelperd[372]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external) <--- this last line is repeated like 100 times

then I reinstalled those kext and I got a faster boot (much more fast). And here is the dmesg:

Scheme/OSX@2

BSD root: disk0s2, major 1, minor 4

hfs: mounted OSX on device root_device

USBF: 1.118 GenericUSBXHCI::CreateRootHubDevice Bus 14 already taken

VM Swap Subsystem is ON

FireWire (OHCI) VendorID 1106 ID 3044 PCI now active, GUID 2000000003002e32; max speed s400.

USBMSC Identifier (non-unique): 00000000000006 0x48d 0x1336 0x100, 2

USBMSC Identifier (non-unique): 575839314134315332313333 0x1058 0x730 0x1016, 3

Apple16X50ACPI1: Identified Serial Port on ACPI Device=UAR1

IOGraphics flags 0x43

Previous shutdown cause: 5

**** [iOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x9000 ****

com_intel_driver_EnergyDriver[0xffffff801744ad00]::start(0xffffff8014b92b00)

DSMOS has arrived

[iOBluetoothHCIController][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x9000

[iOBluetoothHCIController][start] -- completed

Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200

Sound assertion in AppleHDACodecGeneric at line 366

[iOBluetoothHCIController::setConfigState] calling registerService

**** [iOBluetoothHCIController][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0xd580 -- 0xf800 -- 0x9000 ****

IONetworkController::enable

ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out

[AGPM Controller] unknownPlatform

NTFS driver 3.12 [Flags: R/W].

NTFS volume name , version 3.1.

NTFS-fs warning (device /dev/disk1s4, pid 132): ntfs_system_inodes_get(): Windows is hibernated. Will not be able to remount read-write. Run chkdsk.

NTFS volume name , version 3.1.

NTFS volume name My Passport, version 3.1.

AppleKeyStore:Sending lock change 0 for handle -501

NTFS volume name My Passport, version 3.1.

Allan · November 14, 2014

And what the result of this command?

cat /var/log/system.log | grep 'IOPPF:'

chriz74 · November 14, 2014

And what the result of this command?
cat /var/log/system.log | grep 'IOPPF:'

absolutely nothing

but I get this at some point:

14/11/14 20:07:22,000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled

14/11/14 20:07:22,000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled

14/11/14 20:07:22,000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled

14/11/14 20:07:22,000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled

14/11/14 20:07:22,000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled

14/11/14 20:07:22,000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled

14/11/14 20:07:22,000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled

14/11/14 20:07:22,000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled

Allan · November 14, 2014

absolutely nothing

but I get this at some point:

14/11/14 20:07:22,000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled

14/11/14 20:07:22,000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled

14/11/14 20:07:22,000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled

14/11/14 20:07:22,000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled

14/11/14 20:07:22,000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled

14/11/14 20:07:22,000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled

14/11/14 20:07:22,000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled

14/11/14 20:07:22,000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled

This message is not a big deal.

But in the others messages, i saw that you don't have the Power Management in the right way.

You use Sandy Bridge, so you need SSDT+AICPM. And remove NullCPUPM.

chriz74 · November 14, 2014

This message is not a big deal.

But in the others messages, i saw that you don't have the Power Management in the right way.

You use Sandy Bridge, so you need SSDT+AICPM. And remove NullCPUPM.

check result of bdmesg. What is the message regarding the Power Management?

0:100 0:100 MemLog inited, TSC freq: 3502003684

0:100 0:000

0:100 0:000 Now is 14.11.2014, 19:19:47 (GMT+2047)

0:100 0:000 Starting Clover rev 2999 on American Megatrends EFI

0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,ADDF5DF0-07C8-4925-B8A4-DA72A9DF9785,0x28,0x64000) @BF5D218

0:100 0:000 SelfDirPath = \EFI\CLOVER

0:100 0:000 Total Memory Slots Count = 4

0:100 0:000 Type 17 Index = 0

0:100 0:000 Table has error information, checking

0:100 0:000 Found memory information in table 18/1, type=0x3, operation=0x2 syndrome=0x0

0:100 0:000 ...memory OK

0:100 0:000 SmbiosTable.Type17->Speed = 1333MHz

0:100 0:000 SmbiosTable.Type17->Size = 4096MB

0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0

0:100 0:000 Type 17 Index = 1

0:100 0:000 Ignoring insane frequency value 0MHz

0:100 0:000 SmbiosTable.Type17->Speed = 0MHz

0:100 0:000 SmbiosTable.Type17->Size = 0MB

0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1

0:100 0:000 Type 17 Index = 2

0:100 0:000 Table has error information, checking

0:100 0:000 Found memory information in table 18/2, type=0x3, operation=0x2 syndrome=0x0

0:100 0:000 ...memory OK

0:100 0:000 SmbiosTable.Type17->Speed = 1333MHz

0:100 0:000 SmbiosTable.Type17->Size = 4096MB

0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0

0:100 0:000 Type 17 Index = 3

0:100 0:000 Ignoring insane frequency value 0MHz

0:100 0:000 SmbiosTable.Type17->Speed = 0MHz

0:100 0:000 SmbiosTable.Type17->Size = 0MB

0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1

0:100 0:000 Boot status=0

0:100 0:000 Clover revision: 2999 running on System Product Name

0:100 0:000 ... with board P8H67-V

0:100 0:000 Clover load options size = 0 bytes

0:103 0:003 Using OEM config.plist at path: EFI\CLOVER\config.plist

0:104 0:000 EFI\CLOVER\config.plist loaded: Success

0:106 0:002 Found theme BOOTCAMP

0:108 0:002 Loading early settings

0:108 0:000 timeout set to 5

0:108 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)

0:108 0:000 KextsToPatch: 4 requested

0:108 0:000 KextToPatch 0: AppleHDA (t1-10.9/AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6

0:108 0:000 KextToPatch 1: AppleHDA (t1-10.9/AppleHDA/Realtek ALC887) Kext bin patch, data len: 4

0:108 0:000 KextToPatch 2: AppleHDA (t1-10.9/AppleHDA/Realtek ALC887) Kext bin patch, data len: 4

0:108 0:000 KextToPatch 3: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8

0:108 0:000 Default theme: bootcamp

0:108 0:000 Hiding entries with string BOOTX64.EFI

0:108 0:000 Hiding entries with string Windows

0:108 0:000 LoadDrivers() start

0:110 0:002 Loading CsmVideoDxe-64.efi

0:111 0:001 load image status=Success

0:111 0:000 - driver needs connecting

0:111 0:000 Loading DataHubDxe-64.efi

0:112 0:001 load image status=Success

0:130 0:017 Loading EmuVariableUefi-64.efi

0:131 0:000 load image status=Success

0:131 0:000 EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success

0:132 0:001 Loading FSInject-64.efi

0:132 0:000 load image status=Success

0:132 0:000 Loading OsxAptioFixDrv-64.efi

0:133 0:000 load image status=Success

0:133 0:000 Loading OsxFatBinaryDrv-64.efi

0:134 0:000 load image status=Success

0:134 0:000 Loading PartitionDxe-64.efi

0:134 0:000 load image status=Success

0:134 0:000 - driver needs connecting

0:134 0:000 Loading VBoxHfs-64.efi

0:135 0:000 load image status=Success

0:135 0:000 - driver needs connecting

0:135 0:000 3 drivers needs connecting ...

0:135 0:000 PlatformDriverOverrideProtocol not found. Installing ... Success

0:135 0:000 Partition driver loaded: CD disconnect Success

0:135 0:000 Video driver loaded: disconnect Success

0:257 0:122 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok

0:273 0:015 CsmVideoDriverBindingStart

0:273 0:000 Controller is [030000]

0:273 0:000 Check for VBE

0:285 0:012 found Detail Timing 1920x1080

0:285 0:000 found Detail Timing 1280x720

0:336 0:051 0 1280x1024 attr=9B - ok, edid+, working, highest, pref=0

0:336 0:000 1 1024x768 attr=9B - ok, edid+, 1024x768, working

0:336 0:000 2 640x480 attr=9B - ok, edid+, 640x480, working

0:336 0:000 3 800x600 attr=9B - ok, edid+, 800x600, working

0:361 0:025 4 1920x1080 attr=9B - ok, edid+, working, highest, pref=4

0:361 0:000 CsmVideo: New mode: 4 1920x1080 - set

0:541 0:180 - SetMode pref 4 (4) = Success

0:541 0:000 CsmVideoCheckForVbe - Success

0:541 0:000 CsmVideoDriverBindingStart end Success

0:542 0:000 CsmVideo: New mode: 3 800x600 - blocking that switch

0:542 0:000 CsmVideo: New mode: 2 640x480 - blocking that switch

0:785 0:243 LoadDrivers() end

0:785 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success

0:853 0:067 Console modes reported: 3, available modes:

0:853 0:000 Mode 1: 80x25 (current mode)

0:853 0:000 Mode 2: 80x50

0:853 0:000 Mode 3: 100x31

0:853 0:000 SetScreenResolution: 1920x1080 - already set

0:853 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,ADDF5DF0-07C8-4925-B8A4-DA72A9DF9785,0x28,0x64000)

0:853 0:000 CPU Vendor = 756E6547 Model=206A7

0:853 0:000 The CPU supported turbo

0:853 0:000 BrandString = Intel® Core i7-2600K CPU @ 3.40GHz

0:853 0:000 MSR 0xE2 before patch 1E008403

0:853 0:000 MSR 0xE2 is locked, PM patches will be turned on

0:853 0:000 MSR 0xE4 00010414

0:853 0:000 MSR 0xCE 00001000_60012200

0:853 0:000 non-usable FLEX_RATIO = F0000

0:853 0:000 corrected FLEX_RATIO = E0000

0:853 0:000 MSR 0x1B0 00000000

0:853 0:000 FSBFrequency=103MHz DMIvalue=103000kHz

0:853 0:000 Corrected FSBFrequency=103MHz

0:853 0:000 Vendor/Model/Stepping: 0x756E6547/0x2A/0x7

0:853 0:000 Family/ExtFamily: 0x6/0x0

0:853 0:000 MaxDiv/MinDiv: 34.0/16

0:853 0:000 Turbo: 35/36/37/38

0:853 0:000 Features: 0xBFEBFBFF

0:853 0:000 Threads: 8

0:853 0:000 Cores: 4

0:853 0:000 FSB: 103 MHz

0:853 0:000 CPU: 3511 MHz

0:853 0:000 TSC: 3511 MHz

0:853 0:000 PIS: 412 MHz

0:853 0:000 PCI (00|00:00.00) : 8086 0100 class=060000

0:853 0:000 PCI (00|00:01.00) : 8086 0101 class=060400

0:853 0:000 PCI (00|00:02.00) : 8086 0122 class=030000

0:853 0:000 Found GFX model=Intel HD Graphics 3000

0:853 0:000 PCI (00|00:16.00) : 8086 1C3A class=078000

0:853 0:000 PCI (00|00:16.01) : FFFF FFFF class=FFFFFF

0:853 0:000 PCI (00|00:16.02) : FFFF FFFF class=FFFFFF

0:853 0:000 PCI (00|00:16.03) : FFFF FFFF class=FFFFFF

0:853 0:000 PCI (00|00:1A.00) : 8086 1C2D class=0C0320

0:853 0:000 PCI (00|00:1B.00) : 8086 1C20 class=040300

0:853 0:000 PCI (00|00:1C.00) : 8086 1C10 class=060400

0:853 0:000 PCI (00|00:1C.04) : 8086 1C18 class=060400

0:853 0:000 PCI (00|03:00.00) : 1106 0415 class=010185

0:853 0:000 PCI (00|00:1C.05) : 8086 1C1A class=060400

0:853 0:000 PCI (00|04:00.00) : 1B21 1042 class=0C0330

0:853 0:000 PCI (00|00:1C.06) : 8086 1C1C class=060400

0:853 0:000 PCI (00|05:00.00) : 1969 1083 class=020000

0:853 0:000 PCI (00|00:1C.07) : 8086 244E class=060401

0:853 0:000 PCI (00|06:00.00) : 1B21 1080 class=060401

0:853 0:000 PCI (00|07:00.00) : 1106 3044 class=0C0010

0:853 0:000 PCI (00|07:02.00) : 1814 0301 class=028000

0:853 0:000 PCI (00|00:1D.00) : 8086 1C26 class=0C0320

0:853 0:000 PCI (00|00:1F.00) : 8086 1C4A class=060100

0:853 0:000 PCI (00|00:1F.02) : 8086 1C02 class=010601

0:853 0:000 PCI (00|00:1F.03) : 8086 1C22 class=0C0500

0:853 0:000 PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF

0:853 0:000 ScanSPD() start

0:854 0:000 SMBus CmdReg: 0x3

0:854 0:000 Scanning SMBus [8086:1C22], mmio: 0xF7C05004, ioport: 0xF040, hostc: 0x1

0:869 0:015 SPD[0]: Type 11 @0x50

0:878 0:008 Not using XMP because it is not present

0:878 0:000 DDR speed 1333MHz

0:878 0:000 Slot: 0 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=99U5403-034.A00LF SerialNo=000E020C0E090F06

0:899 0:021 SPD[2]: Type 11 @0x52

0:908 0:008 Not using XMP because it is not present

0:908 0:000 DDR speed 1333MHz

0:908 0:000 Slot: 2 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=99U5403-034.A00LF SerialNo=0102020C08060F06

1:034 0:126 ScanSPD() end

1:034 0:000 Get Acpi Tables List from RSDT:

1:034 0:000 Found table: FACP A M I len=132

1:034 0:000 Found table: APIC A M I len=146

1:034 0:000 Found table: MCFG A M I len=60

1:034 0:000 Found table: SSDT SataTabl len=877

1:034 0:000 Found table: SSDT Cpu0Ist len=2474

1:034 0:000 Found table: SSDT CpuPm len=2706

1:034 0:000 Calibrated TSC frequency =3502003684 =3502MHz

1:034 0:000 Loading main settings

1:034 0:000 USB FixOwnership: true

1:034 0:000 Dropping 3 tables

1:034 0:000 Drop table 0 signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)

1:034 0:000 set table: 54445353, 6D50757043 to drop: true

1:034 0:000

1:034 0:000 Drop table 1 signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)

1:034 0:000 set table: 54445353, 74734930757043 to drop: true

1:034 0:000

1:034 0:000 Drop table 2 signature="DMAR" (52414D44)

1:034 0:000 set table: 52414D44, 0 to drop:

1:034 0:000 Config set Fixes will override FixMask mask!

1:034 0:000 final mask=9FCA3BC5

1:034 0:000 Config set EnableC6: +

1:034 0:000 Config set ChassisType=0x10

1:034 0:000 found 18 volumes with blockIO

1:034 0:000 0. Volume:

1:034 0:000 PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x7,0x0)

1:034 0:000 USB volume

1:034 0:000 1. Volume:

1:034 0:000 PciRoot(0x0)\Pci(0x1C,0x5)\Pci(0x0,0x0)\USB(0x1,0x0)

1:035 0:000 Result of bootcode detection: bootable unknown (legacy)

1:035 0:000 USB volume

1:035 0:000 2. Volume:

1:035 0:000 PciRoot(0x0)\Pci(0x1C,0x5)\Pci(0x0,0x0)\USB(0x1,0x0)\HD(1,MBR,0x00038A56,0x800,0x3A375800)

1:036 0:000 Result of bootcode detection: bootable Windows (vista,win)

1:036 0:000 USB volume

1:036 0:000 3. Volume:

1:036 0:000 PciRoot(0x0)\Pci(0x1C,0x5)\Pci(0x0,0x0)\USB(0x1,0x0)\Scsi(0x0,0x1)

1:036 0:000 USB volume

1:036 0:000 4. Volume:

1:036 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)

1:039 0:002 Result of bootcode detection: bootable unknown (legacy)

1:039 0:000 5. Volume:

1:039 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)

1:041 0:002 6. Volume:

1:041 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)

1:041 0:000 Result of bootcode detection: bootable unknown (legacy)

1:041 0:000 7. Volume:

1:041 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)

1:041 0:000 found optical drive

1:041 0:000 8. Volume:

1:041 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,F949BF71-D4E3-49FA-A5D4-32F5BB42D6E5,0x800,0x96000)

1:042 0:000 Result of bootcode detection: bootable Windows (vista,win)

1:042 0:000 9. Volume:

1:042 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,113A4B2A-6DD8-46A3-A127-2EDA863B8462,0x96800,0x31800)

1:043 0:000 Result of bootcode detection: bootable Windows (vista,win)

1:044 0:001 10. Volume:

1:044 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,D9DEBDF5-3ACC-4D42-BFEF-BF3D318C1A8C,0xC8000,0x40000)

1:045 0:000 11. Volume:

1:045 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,2DAB0EE7-AB5A-49E8-A571-5D42090B5A26,0x108000,0x95F2000)

1:045 0:000 Result of bootcode detection: bootable Windows (vista,win)

1:045 0:000 12. Volume:

1:045 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(5,GPT,6B7343C8-D50A-450F-9E98-AB25D2D3452B,0x96FA000,0x13ACB800)

1:046 0:000 Result of bootcode detection: bootable Windows (vista,win)

1:046 0:000 13. Volume:

1:046 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,ADDF5DF0-07C8-4925-B8A4-DA72A9DF9785,0x28,0x64000)

1:047 0:000 Result of bootcode detection: bootable unknown (legacy)

1:052 0:005 This is SelfVolume !!

1:052 0:000 14. Volume:

1:052 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,6D36C2FC-9C4B-485D-AA56-DEDAF188BE4E,0x64028,0xDDFAC40)

1:052 0:000 15. Volume:

1:052 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(3,GPT,3DDC320F-EB6F-43FB-9AE7-D5443CA38AAD,0xDE5EC68,0x135F20)

1:053 0:000 16. Volume:

1:053 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,MBR,0x3B0B794D,0x32800,0x12BCE000)

1:054 0:000 Result of bootcode detection: bootable Windows (vista,win)

1:054 0:000 17. Volume:

1:054 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(2,MBR,0x3B0B794D,0x12C00800,0x61B05800)

1:054 0:000 Result of bootcode detection: bootable Windows (vista,win)

1:059 0:004 Loading nvram.plist from Vol 'OSX' - loaded, size=1027

1:060 0:000 PutNvramPlistToRtVars ...

1:060 0:000 Skipping EmuVariableUefiPresent

1:060 0:000 Adding Key: LocationServicesEnabled: Data: Size = 1: Success

1:060 0:000 Skipping OsxAptioFixDrv-RelocBase

1:060 0:000 Adding Key: SystemAudioVolume: Data: Size = 1: Success

1:060 0:000 Adding Key: SystemAudioVolumeDB: Data: Size = 1: Success

1:060 0:000 Adding Key: backlight-level: Data: Size = 2: Success

1:060 0:000 Adding Key: bluetoothActiveControllerInfo: Data: Size = 16: Success

1:060 0:000 Adding Key: boot-args: String: Size = 15, Val = 'kext-dev-mode=1': Success

1:060 0:000 Adding Key: boot-gamma: Data: Size = 50: Success

1:060 0:000 Adding Key: fmm-computer-name: Data: Size = 18: Success

1:060 0:000 Adding Key: platform-uuid: Data: Size = 16: Success

1:060 0:000 Adding Key: prev-lang:kbd: Data: Size = 4: Success

1:060 0:000 Adding Key: security-mode: String: Size = 4, Val = 'none': Success

1:061 0:001 Using theme 'bootcamp' (EFI\CLOVER\themes\bootcamp)

1:061 0:000 Choosing theme bootcamp

1:061 0:000 found boot-args in NVRAM:kext-dev-mode=1, size=15

1:061 0:000 ...found arg:kext-dev-mode=1

1:061 0:000 Custom entries start

1:061 0:000 Custom entries finish

1:061 0:000 Scanning loaders...

1:061 0:000 0: 'Whole Disc Boot' no file system

1:061 0:000 1: 'Whole Disc Boot' no file system

1:061 0:000 2: 'Legacy HD1' no file system

1:061 0:000 3: 'Whole Disc Boot' no file system

1:061 0:000 4: 'Whole Disc Boot' no file system

1:061 0:000 5: 'Whole Disc Boot' no file system

1:061 0:000 6: 'Whole Disc Boot' no file system

1:061 0:000 7: 'Whole Disc Boot' no file system

1:061 0:000 8: 'Legacy HD1' no file system

1:061 0:000 9: 'EFI'

1:062 0:000 AddLoaderEntry for Volume Name=EFI

1:117 0:055 AddLoaderEntry for Volume Name=EFI

1:117 0:000 hiding entry: \EFI\BOOT\BOOTX64.efi

1:117 0:000 10: 'Legacy HD3' no file system

1:117 0:000 11: 'Legacy HD4' no file system

1:117 0:000 12: 'Legacy HD5' no file system

1:117 0:000 13: 'EFI'

1:158 0:040 AddLoaderEntry for Volume Name=EFI

1:158 0:000 hiding entry: \EFI\BOOT\BOOTX64.efi

1:158 0:000 14: 'OSX'

1:163 0:005 AddLoaderEntry for Volume Name=OSX

1:168 0:005 Check if volume Is Hibernated:

1:168 0:000 Check sleep image 'by signature':

1:174 0:005 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success

1:174 0:000 SleepImage name from pref: ImageVolume = 'OSX', ImageName = '\private\var\vm\sleepimage'

1:179 0:004 sleepimage not found -> Not Found

1:179 0:000 hibernated: no - sign

1:230 0:051 15: 'Recovery HD'

1:231 0:000 AddLoaderEntry for Volume Name=Recovery HD

1:280 0:048 16: 'Legacy HD1' no file system

1:280 0:000 17: 'Legacy HD2' no file system

1:280 0:000 Custom legacy start

1:280 0:000 Custom legacy end

1:280 0:000 Scanning legacy ...

1:280 0:000 0: 'Whole Disc Boot' (legacy) not legacy

1:280 0:000 1: 'Whole Disc Boot' (legacy) not legacy

1:280 0:000 2: 'Legacy HD1' (vista,win) add legacy

1:287 0:006 added 'Boot Windows from Legacy HD1' OSType=2 Icon=vista,win

1:287 0:000 3: 'Whole Disc Boot' (legacy) not legacy

1:287 0:000 4: 'Whole Disc Boot' (legacy) not legacy

1:287 0:000 5: 'Whole Disc Boot' (legacy) not legacy

1:287 0:000 6: 'Whole Disc Boot' (legacy) not legacy

1:287 0:000 7: 'Whole Disc Boot' (legacy) not legacy

1:287 0:000 8: 'Legacy HD1' (vista,win) add legacy

1:290 0:003 added 'Boot Windows from Legacy HD1' OSType=2 Icon=vista,win

1:290 0:000 9: 'EFI' (vista,win) add legacy

1:293 0:003 added 'Boot Windows from EFI' OSType=2 Icon=vista,win

1:293 0:000 10: 'Legacy HD3' (legacy) not legacy

1:293 0:000 11: 'Legacy HD4' (vista,win) add legacy

1:297 0:003 added 'Boot Windows from Legacy HD4' OSType=2 Icon=vista,win

1:297 0:000 12: 'Legacy HD5' (vista,win) add legacy

1:300 0:003 added 'Boot Windows from Legacy HD5' OSType=2 Icon=vista,win

1:300 0:000 13: 'EFI' (legacy) not legacy

1:300 0:000 14: 'OSX' (legacy) not legacy

1:300 0:000 15: 'Recovery HD' (legacy) not legacy

1:300 0:000 16: 'Legacy HD1' (vista,win) add legacy

1:303 0:003 added 'Boot Windows from Legacy HD1' OSType=2 Icon=vista,win

1:303 0:000 17: 'Legacy HD2' (vista,win) add legacy

1:307 0:003 added 'Boot Windows from Legacy HD2' OSType=2 Icon=vista,win

1:307 0:000 Custom tool start

1:307 0:000 Custom tool end

1:309 0:002 found tool \EFI\CLOVER\tools\Shell64U.efi

1:309 0:000 Checking EFI partition Volume 9 for Clover

1:311 0:002 Checking EFI partition Volume 13 for Clover

1:311 0:000 Found Clover

1:312 0:001 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored

1:318 0:005 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success

1:386 0:068 GetEfiBootDeviceFromNvram: efi-boot-device-data not found

1:386 0:000 EfiBootVolume not found

1:386 0:000 Default boot entry not found

1:386 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored

1:386 0:000 DefaultIndex=-1 and MainMenu.EntryCount=16

1:386 0:000 Use anime=logo_3D frames=50

2:064 0:677 Found Mouse device:

2:064 0:000 GUI ready

3:485 1:420 BootOption of the entry is empty

3:485 0:000 StartLoader() start

3:485 0:000 Finally: Bus=103000kHz CPU=3502MHz

3:485 0:000 Kernel and Kext Patches:

3:485 0:000 Allowed: y

3:485 0:000 Debug: n

3:485 0:000 KernelCpu: n

3:485 0:000 Lapic: n

3:485 0:000 AICPUPM: y

3:485 0:000 AppleRTC: y

3:485 0:000 KernelPm: n

3:485 0:000 FakeCPUID: 0x0

3:485 0:000 ATIController: <null string>

3:485 0:000 ATIDataLength: 0

3:485 0:000 0 Kexts to load

3:485 0:000 4 Kexts to patch

3:485 0:000 KextPatch[0]: 6 bytes, AppleHDA

3:485 0:000 KextPatch[1]: 4 bytes, AppleHDA

3:485 0:000 KextPatch[2]: 4 bytes, AppleHDA

3:485 0:000 KextPatch[3]: 8 bytes, AppleAHCIPort

3:485 0:000 Loading boot.efi

3:564 0:079 load image status=Success

3:671 0:106 GetOSVersion: : 10.10

3:671 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success

3:739 0:068 insert table 9 for dev 0:0

3:739 0:000 insert table 9 for dev 2:0

3:739 0:000 insert table 9 for dev 0:0

3:740 0:000 Channels: 2

3:740 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23

3:740 0:000 SMBIOS Type 17 Index = 0 => 0 0:

3:740 0:000 BANK0 DIMM0 1333MHz 4096MB

3:740 0:000 mTotalSystemMemory = 4096

3:740 0:000 SMBIOS Type 17 Index = 1 => 2 2:

3:740 0:000 BANK1 DIMM0 1333MHz 4096MB

3:740 0:000 mTotalSystemMemory = 8192

3:740 0:000 SMBIOS Type 17 Index = 2 => 1 1:

3:740 0:000 BANK0 DIMM1 EMPTY

3:740 0:000 SMBIOS Type 17 Index = 3 => 3 3:

3:740 0:000 BANK1 DIMM1 EMPTY

3:740 0:000 NumberOfMemoryDevices = 4

3:740 0:000 Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000

3:740 0:000 Type20[1]->End = 0x7FFFFF, Type17[1] = 0x3000

3:740 0:000 RSDT 0xCEB8A028

3:740 0:000 FADT from RSDT: 0xCEB8A0D0

3:740 0:000 XSDT 0xCEB8A070

3:740 0:000 FADT from XSDT: 0xCEB94C28

3:740 0:000 Xsdt reallocation done

3:740 0:000 old FADT length=F4

3:740 0:000 Found OperationRegion(GNVS, SystemMemory, CEBB4E18, ...)

3:740 0:000 Found OperationRegion(MCHT, SystemMemory, FED10000, ...)

3:740 0:000 Found OperationRegion(RCRB, SystemMemory, FED1C000, ...)

3:740 0:000 Found OperationRegion(CPSB, SystemMemory, CEBC6F98, ...)

3:740 0:000 Found OperationRegion(IGDM, SystemMemory, 0, ...)

3:740 0:000 Found OperationRegion(RAMW, SystemMemory, CEB97018, ...)

3:743 0:002 DSDT len = 0xAACA new len = 0xC023

3:743 0:000 Apply DsdtFixMask=0x9FCA3BC5 new way

3:743 0:000 drop _DSM mask=0x0000

3:743 0:000 ========= Auto patch DSDT Starting ========

3:743 0:000 VideoCard devID=0x1228086

3:743 0:000 DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE

3:743 0:000 USBADR[0] = 0x1A0000 and PCIe = 0xFFFE

4:005 0:262 Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1)

4:005 0:000 USBADR[1] = 0x1C0005 and PCIe = 0x0

4:006 0:000 USBADR[2] = 0x1D0000 and PCIe = 0xFFFE

4:006 0:000 first CPU found at 6F57 offset 6F5A

4:006 0:000 score candidate at 6F53

4:006 0:000 score inserted in acpi_cpu_score _PR_

4:006 0:000 Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7

within the score: _PR_

4:006 0:000 Found PCIROOTUID = 0

4:006 0:000 Start RTC Fix

4:006 0:000 found RTC Length not match, Maybe will case CMOS reset will patch it.

4:006 0:000 found RTC had IRQNoFlag will move -3 bytes

4:006 0:000 ...len=AB07

4:006 0:000 new size written to 24DC shift=0 len=AB07

4:006 0:000 len after correct outers AB07

4:006 0:000 Start PIC Fix

4:006 0:000 PIC size=A5 at 2380

4:006 0:000 found CRS at 2394 size 8D

4:006 0:000 found PIC had IRQNoFlag will move -3 bytes

4:006 0:000 Fix Device PIC size -3

4:006 0:000 Start NetWork Fix

4:007 0:000 found NetWork device [0x001C0006:0] at 3F9B and Name is PXSX

4:007 0:000 NetworkADR1=1C0006 NetworkADR2=0

4:007 0:000 network DSM created, size=86

4:007 0:000 Start SBUS Fix PCI=12CA len=AB8B

4:007 0:000 device (SBUS) found at 4F0C

4:007 0:000 SBUS code size fix = 0x0000005D

4:007 0:000 patch FRWR in DSDT

4:008 0:000 found Firewire device NAME(_ADR,0x00000000) at 4227 And Name is PXSX

4:008 0:000 Name PXSX present at 0xC7, renaming to FRWR

4:008 0:000 Name PXSX present at 0xE7, renaming to FRWR

4:008 0:000 Start Firewire Fix

4:008 0:000 Start Add IMEI

4:008 0:000 Start USB Fix

4:008 0:000 USB bridge[1A0000] at 4B3A, size = 3A0

4:008 0:000 found slave _DSM, skip

4:009 0:000 USB bridge[1C0005] at 3DFB, size = FD

4:009 0:000 found USB device [001C0005:0] at 3E9D and Name is PXSX

4:009 0:000 Name PXSX present at 0xA2, renaming to XHC1

4:009 0:000 Name PXSX present at 0xE0, renaming to XHC1

4:009 0:000 USB bridge[1D0000] at 46F0, size = 53A

4:009 0:000 found slave _DSM, skip

4:009 0:000 deleting device CRT_

4:009 0:000 deleting device DVI_

4:009 0:000 deleting device SPKR

4:010 0:000 deleting device ECP_

4:010 0:000 deleting device LPT_

4:010 0:000 deleting device FDC0

4:010 0:000 deleting device ECP1

4:010 0:000 deleting device LPT1

4:011 0:000 Start PNLF Fix

4:011 0:000 found PWRB at 4426

4:011 0:000 Start _S3D Fix

4:011 0:000 OperationRegion (GNVS...) corrected to addr=0xCEBB4E18

4:011 0:000 OperationRegion (MCHT...) corrected to addr=0xFED10000

4:011 0:000 indirect name=SRCB

4:011 0:000 OperationRegion (RCRB...) corrected to addr=0xFED1C000

4:011 0:000 OperationRegion (CPSB...) corrected to addr=0xCEBC6F98

4:011 0:000 indirect name=ASLB

4:011 0:000 ... value not defined

4:011 0:000 OperationRegion (IGDM...) corrected to addr=0x0

4:011 0:000 indirect name=RAMB

4:011 0:000 OperationRegion (RAMW...) corrected to addr=0xCEB97018

4:011 0:000 Start ADP1 fix

4:011 0:000 no device(AC) exists

4:011 0:000 Start SHUTDOWN Fix len=AD4C

4:011 0:000 ========= Auto patch DSDT Finished ========

4:011 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=CpuPm Length=2706

4:011 0:000 Xsdt has tables count=6

4:011 0:000 Table: SSDT CpuPm 2706 dropped

4:011 0:000 corrected XSDT length=76

4:011 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=Cpu0Ist Length=2474

4:011 0:000 Xsdt has tables count=5

4:011 0:000 Table: SSDT Cpu0Ist 2474 dropped

4:011 0:000 corrected XSDT length=68

4:011 0:000 Patch table: SSDT SataTabl

4:011 0:000 SSDT len = 0x36D

4:011 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0

4:011 0:000 Xsdt has tables count=4

4:011 0:000 corrected XSDT length=68

4:012 0:000 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8

4:012 0:000 Maximum control=0x22

4:012 0:000 Turbo control=0x26

4:012 0:000 P-States: min 0x10, max 0x26

4:012 0:000 SSDT with CPU P-States generated successfully

4:012 0:000 SSDT with CPU C-States generated successfully

4:012 0:000 EdidDiscovered size=128

4:012 0:000 00 | 00 FF FF FF FF FF FF 00 4C 2D DA 08 38 36 31 30

4:012 0:000 16 | 0E 16 01 03 80 35 1E 78 2A BA 41 A1 59 55 9D 28

4:012 0:000 32 | 0D 50 54 BF EF 80 71 4F 81 C0 81 00 81 80 95 00

4:012 0:000 48 | A9 C0 B3 00 01 01 02 3A 80 18 71 38 2D 40 58 2C

4:012 0:000 64 | 45 00 13 2B 21 00 00 1E 01 1D 00 72 51 D0 1E 20

4:012 0:000 80 | 6E 28 55 00 13 2B 21 00 00 1E 00 00 00 FD 00 32

4:012 0:000 96 | 4B 1E 51 11 00 0A 20 20 20 20 20 20 00 00 00 FC

4:012 0:000 112 | 00 53 32 34 42 33 35 30 0A 20 20 20 20 20 01 96

4:012 0:000 Intel Intel HD Graphics 3000 [8086:0122] :: PciRoot(0x0)\Pci(0x2,0x0)

4:012 0:000 Intel GFX revision =0x9

4:012 0:000 USB Controller [8086:1C2D] :: PciRoot(0x0)\Pci(0x1A,0x0)

4:012 0:000 HDA Controller [8086:1C20] :: PciRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=1 (0x1)

4:012 0:000 USB Controller [1B21:1042] :: PciRoot(0x0)\Pci(0x1C,0x5)\Pci(0x0,0x0)

4:012 0:000 USB Controller [8086:1C26] :: PciRoot(0x0)\Pci(0x1D,0x0)

4:012 0:000 stringlength = 2858

4:013 0:000 CurrentMode: Width=1920 Height=1080

4:013 0:000 FSInjection: using kexts path: 'EFI\CLOVER\kexts\10.10'

4:017 0:004 MSR 0x1B0 set to 00000000

4:017 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.10

4:018 0:001 Extra kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext

4:023 0:005 Extra kext: EFI\CLOVER\kexts\10.10\realtekALC.kext

4:025 0:001 Extra kext: EFI\CLOVER\kexts\10.10\GenericUSBXHCI.kext

4:032 0:006 Removed efi-boot-device-data variable: Not Found

4:032 0:000 Custom boot screen not used because entry has unset use graphics

4:032 0:000 Closing log

Edited November 14, 2014 by Allaп
Spoiler add

Allan · November 14, 2014

This:

1:034  0:000  Get Acpi Tables List from RSDT:
1:034  0:000   Found table: FACP  A M I len=132
1:034  0:000   Found table: APIC  A M I len=146
1:034  0:000   Found table: MCFG  A M I len=60
1:034  0:000   Found table: SSDT  SataTabl len=877
1:034  0:000   Found table: SSDT  Cpu0Ist len=2474
1:034  0:000   Found table: SSDT  CpuPm len=2706

and this:

4:011  0:000  Drop tables from Xsdt, SIGN=SSDT TableID=CpuPm Length=2706
4:011  0:000   Xsdt has tables count=6 
4:011  0:000   Table: SSDT  CpuPm  2706 dropped
4:011  0:000  corrected XSDT length=76
4:011  0:000  Drop tables from Xsdt, SIGN=SSDT TableID=Cpu0Ist Length=2474
4:011  0:000   Xsdt has tables count=5 
4:011  0:000   Table: SSDT  Cpu0Ist  2474 dropped
4:011  0:000  corrected XSDT length=68
4:011  0:000  Patch table: SSDT  SataTabl
4:011  0:000   SSDT len = 0x36D
4:011  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
4:011  0:000   Xsdt has tables count=4 
4:011  0:000  corrected XSDT length=68
4:012  0:000   CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8
4:012  0:000  Maximum control=0x22
4:012  0:000  Turbo control=0x26
4:012  0:000  P-States: min 0x10, max 0x26
4:012  0:000  SSDT with CPU P-States generated successfully

4:012  0:000  SSDT with CPU C-States generated successfully

You dropped the ACPI tables in config.plist

chriz74 · November 14, 2014

This:

1:034  0:000  Get Acpi Tables List from RSDT:
1:034  0:000   Found table: FACP  A M I len=132
1:034  0:000   Found table: APIC  A M I len=146
1:034  0:000   Found table: MCFG  A M I len=60
1:034  0:000   Found table: SSDT  SataTabl len=877
1:034  0:000   Found table: SSDT  Cpu0Ist len=2474
1:034  0:000   Found table: SSDT  CpuPm len=2706

and this:

4:011  0:000  Drop tables from Xsdt, SIGN=SSDT TableID=CpuPm Length=2706
4:011  0:000   Xsdt has tables count=6 
4:011  0:000   Table: SSDT  CpuPm  2706 dropped
4:011  0:000  corrected XSDT length=76
4:011  0:000  Drop tables from Xsdt, SIGN=SSDT TableID=Cpu0Ist Length=2474
4:011  0:000   Xsdt has tables count=5 
4:011  0:000   Table: SSDT  Cpu0Ist  2474 dropped
4:011  0:000  corrected XSDT length=68
4:011  0:000  Patch table: SSDT  SataTabl
4:011  0:000   SSDT len = 0x36D
4:011  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
4:011  0:000   Xsdt has tables count=4 
4:011  0:000  corrected XSDT length=68
4:012  0:000   CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8
4:012  0:000  Maximum control=0x22
4:012  0:000  Turbo control=0x26
4:012  0:000  P-States: min 0x10, max 0x26
4:012  0:000  SSDT with CPU P-States generated successfully

4:012  0:000  SSDT with CPU C-States generated successfully

You dropped the ACPI tables in config.plist

Now I put the dsdt.aml in efi/acpi/patched and this is result of dmesg, (the other command for log still returns nothing).

Anyway should I remove the acpi table from config.plist?

: disk0s2, major 1, minor 4

USBF: 1.110 GenericUSBXHCI::CreateRootHubDevice Bus 14 already taken

hfs: mounted OSX on device root_device

VM Swap Subsystem is ON

FireWire (OHCI) VendorID 1106 ID 3044 PCI now active, GUID 2000000003002e32; max speed s400.

USBMSC Identifier (non-unique): 00000000000006 0x48d 0x1336 0x100, 2

USBMSC Identifier (non-unique): 575839314134315332313333 0x1058 0x730 0x1016, 3

Waiting for DSMOS...

IOGraphics flags 0x43

Apple16X50ACPI1: Identified Serial Port on ACPI Device=UAR1

Previous shutdown cause: 5

**** [iOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x8000 ****

Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200

com_intel_driver_EnergyDriver[0xffffff80172be700]::start(0xffffff8014aefb00)

[iOBluetoothHCIController][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x8000

[iOBluetoothHCIController][start] -- completed

Sound assertion in AppleHDACodecGeneric at line 366

IONetworkController::enable

DSMOS has arrived

[iOBluetoothHCIController::setConfigState] calling registerService

**** [iOBluetoothHCIController][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0xda00 -- 0x8800 -- 0x8000 ****

ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out

[AGPM Controller] unknownPlatform

NTFS driver 3.12 [Flags: R/W].

NTFS volume name , version 3.1.

NTFS-fs warning (device /dev/disk1s4, pid 133): ntfs_system_inodes_get(): Windows is hibernated. Will not be able to remount read-write. Run chkdsk.

NTFS volume name , version 3.1.

NTFS volume name My Passport, version 3.1.

AppleKeyStore:Sending lock change 0 for handle -501

NTFS volume name My Passport, version 3.1.

BUG in process suhelperd[359]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)

Allan · November 14, 2014

You need AICPMpatch

ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out

Send me your config.plist

chriz74 · November 14, 2014

You need AICPMpatch

ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out

Send me your config.plist

I deleted the drop ssdt tables and this is what dmesg looks like:

Scheme/OSX@2

BSD root: disk0s2, major 1, minor 9

hfs: mounted OSX on device root_device

USBF: 1.118 GenericUSBXHCI::CreateRootHubDevice Bus 14 already taken

VM Swap Subsystem is ON

FireWire (OHCI) VendorID 1106 ID 3044 PCI now active, GUID 2000000003002e32; max speed s400.

USBMSC Identifier (non-unique): 575839314134315332313333 0x1058 0x730 0x1016, 3

USBMSC Identifier (non-unique): 00000000000006 0x48d 0x1336 0x100, 2

IOGraphics flags 0x43

Apple16X50ACPI1: Identified Serial Port on ACPI Device=UAR1

Previous shutdown cause: 5

**** [iOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x3000 ****

com_intel_driver_EnergyDriver[0xffffff80173fcd00]::start(0xffffff8014b4eb00)

DSMOS has arrived

[iOBluetoothHCIController][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x3000

[iOBluetoothHCIController][start] -- completed

Sound assertion in AppleHDACodecGeneric at line 366

Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200

[iOBluetoothHCIController::setConfigState] calling registerService

**** [iOBluetoothHCIController][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0xa900 -- 0x9000 -- 0x3000 ****

IONetworkController::enable

ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out

[AGPM Controller] unknownPlatform

NTFS driver 3.12 [Flags: R/W].

NTFS volume name , version 3.1.

NTFS-fs warning (device /dev/disk1s4, pid 133): ntfs_system_inodes_get(): Windows is hibernated. Will not be able to remount read-write. Run chkdsk.

NTFS volume name , version 3.1.

NTFS volume name My Passport, version 3.1.

AppleKeyStore:Sending lock change 0 for handle -501

NTFS volume name My Passport, version 3.1.

BUG in process suhelperd[365]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)

You need AICPMpatch

ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out

Send me your config.plist

I will patch now. I sent the plist in private

You need AICPMpatch

ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out

Send me your config.plist

after patching bdmesg:

3:542 0:000 Patch table: SSDT SataTabl

3:542 0:000 SSDT len = 0x36D

3:542 0:000 Patch table: SSDT Cpu0Ist

3:542 0:000 SSDT len = 0x9AA

3:542 0:000 Patch table: SSDT CpuPm

3:542 0:000 SSDT len = 0xA92

3:542 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0

3:542 0:000 Xsdt has tables count=6

3:542 0:000 corrected XSDT length=84

3:542 0:000 Inserting SSDT.aml from EFI\CLOVER\ACPI\patched ... Success

3:544 0:002 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8

3:544 0:000 Maximum control=0x22

3:544 0:000 Turbo control=0x26

3:544 0:000 P-States: min 0x10, max 0x26

3:544 0:000 SSDT with CPU P-States generated successfully

3:544 0:000 SSDT with CPU C-States generated successfully

3:544 0:000 EdidDiscovered size=128

3:544 0:000 00 | 00 FF FF FF FF FF FF 00 4C 2D DA 08 38 36 31 30

3:544 0:000 16 | 0E 16 01 03 80 35 1E 78 2A BA 41 A1 59 55 9D 28

3:544 0:000 32 | 0D 50 54 BF EF 80 71 4F 81 C0 81 00 81 80 95 00

3:544 0:000 48 | A9 C0 B3 00 01 01 02 3A 80 18 71 38 2D 40 58 2C

3:544 0:000 64 | 45 00 13 2B 21 00 00 1E 01 1D 00 72 51 D0 1E 20

3:544 0:000 80 | 6E 28 55 00 13 2B 21 00 00 1E 00 00 00 FD 00 32

3:544 0:000 96 | 4B 1E 51 11 00 0A 20 20 20 20 20 20 00 00 00 FC

3:544 0:000 112 | 00 53 32 34 42 33 35 30 0A 20 20 20 20 20 01 96

3:544 0:000 Intel Intel HD Graphics 3000 [8086:0122] :: PciRoot(0x0)\Pci(0x2,0x0)

3:544 0:000 Intel GFX revision =0x9

3:544 0:000 USB Controller [8086:1C2D] :: PciRoot(0x0)\Pci(0x1A,0x0)

3:544 0:000 HDA Controller [8086:1C20] :: PciRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=1 (0x1)

3:545 0:000 USB Controller [1B21:1042] :: PciRoot(0x0)\Pci(0x1C,0x5)\Pci(0x0,0x0)

3:545 0:000 USB Controller [8086:1C26] :: PciRoot(0x0)\Pci(0x1D,0x0)

3:545 0:000 stringlength = 2858

3:545 0:000 CurrentMode: Width=1920 Height=1080

3:545 0:000 FSInjection: using kexts path: 'EFI\CLOVER\kexts\10.10'

3:548 0:003 MSR 0x1B0 set to 00000000

3:548 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.10

3:549 0:001 Extra kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext

3:554 0:005 Extra kext: EFI\CLOVER\kexts\10.10\realtekALC.kext

3:557 0:002 Extra kext: EFI\CLOVER\kexts\10.10\GenericUSBXHCI.kext

3:563 0:006 Removed efi-boot-device-data variable: Not Found

3:563 0:000 Custom boot screen not used because entry has unset use graphics

3:563 0:000 Closing log

and dmesg

: disk0s2, major 1, minor 4

hfs: mounted OSX on device root_device

USBF: 1.119 GenericUSBXHCI::CreateRootHubDevice Bus 14 already taken

VM Swap Subsystem is ON

FireWire (OHCI) VendorID 1106 ID 3044 PCI now active, GUID 2000000003002e32; max speed s400.

USBMSC Identifier (non-unique): 575839314134315332313333 0x1058 0x730 0x1016, 3

USBMSC Identifier (non-unique): 00000000000006 0x48d 0x1336 0x100, 2

IOGraphics flags 0x43

Apple16X50ACPI1: Identified Serial Port on ACPI Device=UAR1

Previous shutdown cause: 5

**** [iOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xb800 ****

Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200

com_intel_driver_EnergyDriver[0xffffff8017418f00]::start(0xffffff8014b32b00)

[iOBluetoothHCIController][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xb800

[iOBluetoothHCIController][start] -- completed

Waiting for DSMOS...

Sound assertion in AppleHDACodecGeneric at line 366

DSMOS has arrived

IONetworkController::enable

[iOBluetoothHCIController::setConfigState] calling registerService

**** [iOBluetoothHCIController][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0xbd00 -- 0x0000 -- 0xb800 ****

NTFS driver 3.12 [Flags: R/W].

NTFS volume name , version 3.1.

NTFS-fs warning (device /dev/disk1s4, pid 132): ntfs_system_inodes_get(): Windows is hibernated. Will not be able to remount read-write. Run chkdsk.

ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out

[AGPM Controller] unknownPlatform

NTFS volume name , version 3.1.

NTFS volume name My Passport, version 3.1.

AppleKeyStore:Sending lock change 0 for handle -501

NTFS volume name My Passport, version 3.1.

BUG in process suhelperd[363]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)

Power management for Sandy/Ivy Bridge/Haswell CPUs

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites