[GUIDE] Dell Inspiron 17R - 7720 SE - Mac OS X Mavericks 10.9.1

[miha77]

​This is short guide, without unnecessary repeating well known installation procedures. For those who find this hard to follow, I suggest “Google” around like I was, before returning to this, because for those familiar with this, it will be a piece of cake!

I put some effort to put this together, within my abilities and knowledge, but there are some unresolved issues, for which I hope to find help here, especially from more experienced guys who run this project.

I am great enthusiast and supporter of Linux, which is, as you all well know OPEN SOURCE. This means that knowledge is meant to be shared and to be available to all, which I belive applies to the Hackintosh project also. So, this is my contribution :

My configuration:

 

• 17.3" Full High Definition (1080p) LED Display with Anti-Glare
• 3rd Generation Intel® CoreTM i7-3630QM 2.4 Ghz (6MB cache, up to 3.4 Ghz)
• 8GB Dual Channel DDR3 SDRAM at 1600MHz
• 256GB Samsung SSD 840 PRO Series ( Windows 7 + Ubuntu - MBR)
• 1TB 5400RPM SATA HDD ST1000LM024 HN-M101MBB ( Mac OS X RecoveryHD + Data - GUID)
• 128GB mSATA SSD KINGSTON SMS200S3120G ( Mac OS X Mavericks HD - GUID, BIOS set to AHCI and can’t boot mSATA directly, use boot loader on RecoveryHD or Windows EasyBCD)
• NVIDIA GeForce GT 650M GDDR5 2GB (completely disabled by DSDT injection)
• Intel HD 4000 ( does not need an EFI string after installation enabled by DSDT injection)
• Intel WiFi/BT ( replaced with Atheros 9285 + IoGear USB BT )

Instalation :

1. ##### method (Forbidden here, you will know which one) - Mac OS X Mavericks 10.9.1

- Use HDMI connected display for installation

or

- Add this EFI key to org.chameleon.Boot.plist in Extra folder of USB stick, so you can use built-in display for installation

<key>device-properties</key> <string>7f0000000100000001000000730000000200000002 010c00d041030a000000000101060000027fff04002c000000 4100410050004c002c00690067002d0070006c006100740066 006f0072006d002d0069006400000008000000040066011400 00006800640061002d0067006600780000000d0000006f6e62 6f6172642d31</string>


Post-Instalation :

1. ##### method (Forbidden here, you will know which one) - Preselected options file attached ( Exclude TRIM Patch if you don’t use SSD )

 

2. Necessary tools for post-installation attached.

 

3. Extra folder with files attached ( Create your own smbios.plist with Chameleon Wizard - MacBookPro8,3 17-inch, Early 2011 This is important! ) 

4. S/L/E folder with kexts attached ( Use Kext Wizard to install kexts, repair permissions and reboot! That`s all folks!)

5. Crate Apple ID,activate and authorize computer with iTunes, but remember that you need valid credit card or you will not be able to use iMessages or FaceTime ! Ethernet must be en0 !

If you don`t have other WiFi card use HoRNDIS-rel4.pkg for Android USB tethering or just BT tethering !

Unresolved Issues :

- Touchpad ( Working but only basic input, no gestures like 2 finger scrolling )
- Audio ( Working but subwoofer and HDMI audio not working, Line-In not tested)
- FN keys ( Brightness and WiFi control not working, audio working )
- Lan ( only with 10baseT/UTP half duplex )
- Sleep ( First sleep OK, after that touchpad not working, sleep not working, wrong readings TZ1 and TZ2 )
- DSDT ( Operational, but obviously need fine tweaking to resolve issues and enable all features possible. I don’t use SSDT, speedsteping with turbo boost ) 
- Card Reader ( Recognized as connected to Built-In USB/Hub, USB2.0-CRW, Product ID:0x0129 Vendor ID:0x0bda (Realtek Semiconductor Corp.) not working )
- Built-In Screen ( Not reaching full brightness unless you have hot corner activated to put it to sleep and activate again, after that all normal )
- Fan RPM ( not detected or stuck to 255 rpm )

Conclusion :

This is best I could do at this moment. It is functional Hackintosh, but with issues. If you want real thing you know where Apple.com is. This machine deserves attention of this community, not only because of its performance and compatibility but also ability for improvements with right people included. I invite all people with good will and some knowledge to help.

These were my start points and I like to thank Lejenk for his efforts to put his guide together and help many of us. I hope mine will be helpful too.

 

http://www.insanelymac.com/forum/topic/286552-guidedell-inspirion-17r-se-7720-installation-guide/

http://www.osx86.net/files/file/512-...20-dsdt-kexts/


Best regards from Serbia! 

Attachements :

Extra.zip

SLE.zip

Tools.zip

[fantomas]

hi

 

welcome on InsanelyMac  

 

thank you for your tuto  

 

and yes, as you point out, we don't support tonymacx86 tools

 

but there is a thing that I don't understand, you know it is "Forbidden here" and despite that, you continue to mention it trying to bypass the forum filters

 

Uni"Monster" method (Forbidden here, you will know which one)

 

really? 

[miha77]

Dear fantomas1,

 

"I am great enthusiast and supporter of Linux, which is, as you all well know OPEN SOURCE. This means that knowledge is meant to be shared and to be available to all, which I believe applies to the Hackintosh project also."

 

I think that my point is clear. By filtering my post you directly brake previous, making my post wasted time because readers won't get it if they can't find my sources. I just wished to share my knowledge with others without your censorship. Is it against your rules to avoid your filter by implying something?

 

You won't find two Linux communities spitting on each other, even if someone makes profit along side. In fact,It is being fruitfull for them. 

 

At the end, if my post is not worthy by your "standards" fill free to delete it, I will find some free and uncensored space on the Internet to post it !

 

Best regards from Serbia!

[Laberlohe]

Hi miha,

 

before speaking of censorship you shold the forum rules. If you these aren't fair in case of TMX keep on reading this pinned thread about TMX or use the search function with TMX and ban/banned. After reading that you will change your opion...

 

As matter of fact there are a lot of users coming here because the pirated and clued together tools of TMX produce many unnecessary kp's, instabilities and slow systems. There are much better tools out. So why shall insanelymac promote TMX or his tools?

 

Best regards

[fantomas]

@ miha77

 

I don't see what "OPEN SOURCE" or "sharing knowledge" has to do with our forum filters.

 

if you want to support tonymacx86 tools, you are free to do it everywhere you want but not here

 

I think that this time my point is very clear

 

and as Laberlohe said, you should read the thread about why we don't support tontmacx86 tools, maybe this will help you to understand our position about tonymacx86 tools.  

[miha77]

Dear,

 

We can agree, that we disagree about this issue. Your house-your rules, and that's ok by me. This doesn't mean that I have to share your views about this.  I am no one's solicitor, and I am not representing either side. I think that the wheel doesn't need to be reinvented, it is common good. You can only find different ways of using it.

 

I hoped to receive more positive feedback to simplified and effective install method, and help regarding remaining issues mentioned in my post. By focusing on this and joining forces, something may be achieved for greater good of all.

 

Once again, Linux communities, both open source and commercial, are great example of cooperation.

 

Necessity is the mother of invention and the ends justify the means!

 

Best regards from Serbia! 

[fantomas]

This doesn't mean that I have to share your views about this

 

yeah, sure

 

we can't force you to share our views, it sounds obvious, but as you know, each forum has its own rules and must be observed. I think this also sounds obvious.

 

now, as you said, there's different ways to install OS X on your laptop, by that I mean using different tools. And as we don't support tonymacx86 tools, we only can suggest you to find another way to complete your install.

 

after that, we will be able to provide you more help.  

 

good luck

[gnome.kde]

  Hi guys,

I have a problem: QE_CI not work after update do 10.9.4. I also have screen flicker

I have tired all ways, but nothing!

(PS: sorry for bad English)

 

My situation:

 

http://it.tinypic.com/view.php?pic=mip284&s=8#.U-HWTVZ0Xm1

Francescos-Mac-Pro:~ francesco$ kextstat
Index Refs Address            Size       Wired      Name (Version) <Linked Against>
    1   74 0xffffff7f807e3000 0x8d80     0x8d80     com.apple.kpi.bsd (13.3.0)
    2    7 0xffffff7f80b25000 0x28c0     0x28c0     com.apple.kpi.dsep (13.3.0)
    3  102 0xffffff7f807ac000 0x1dfb0    0x1dfb0    com.apple.kpi.iokit (13.3.0)
    4  110 0xffffff7f807ca000 0xbf40     0xbf40     com.apple.kpi.libkern (13.3.0)
    5   96 0xffffff7f807a9000 0x2d10     0x2d10     com.apple.kpi.mach (13.3.0)
    6   43 0xffffff7f807d6000 0x7d90     0x7d90     com.apple.kpi.private (13.3.0)
    7   65 0xffffff7f807de000 0x48e0     0x48e0     com.apple.kpi.unsupported (13.3.0)
    8    2 0xffffff7f80b2b000 0x47000    0x47000    com.apple.kec.corecrypto (1.0) <7 6 5 4 3 1>
    9    0 0xffffff7f80bea000 0xb000     0xb000     com.apple.kec.pthread (1) <7 6 5 4 1>
   10   22 0xffffff7f810f6000 0x9000     0x9000     com.apple.iokit.IOACPIFamily (1.4) <7 6 4 3>
   11   29 0xffffff7f808be000 0x2f000    0x2f000    com.apple.iokit.IOPCIFamily (2.9) <7 6 5 4 3>
   12    2 0xffffff7f81fb8000 0x5c000    0x5c000    com.apple.driver.AppleACPIPlatform (2.0) <11 10 7 6 5 4 3 1>
   13    0 0xffffff7f81658000 0x2000     0x2000     es.osx86.driver.EvOreboot (1.0.3) <4 3>
   14    1 0xffffff7f80e31000 0xb000     0xb000     com.apple.driver.AppleFDEKeyStore (28.30) <8 7 6 5 4 3 1>
   15    1 0xffffff7f810e5000 0x11000    0x11000    com.apple.iokit.IOReportFamily (23) <5 4 3>
   16    9 0xffffff7f807ec000 0x2d000    0x2d000    com.apple.iokit.IOStorageFamily (1.9) <7 6 5 4 3 1>
   17    0 0xffffff7f811df000 0x1e000    0x1e000    com.apple.driver.DiskImages (371.1) <16 7 6 5 4 3 1>
   18    3 0xffffff7f815d6000 0x1d000    0x1d000    org.netkas.driver.FakeSMC (1315) <10 7 5 4 3 1>
   19    0 0xffffff7f81b2b000 0x14000    0x14000    com.apple.driver.AppleKeyStore (2) <8 7 6 5 4 3 1>
   20    0 0xffffff7f81cd6000 0x2b000    0x2b000    com.apple.driver.AppleIntelCPUPowerManagement (216.0.0) <7 6 5 4 3 1>
   21    0 0xffffff7f81631000 0x5000     0x5000     org.hwsensors.driver.CPUSensors (1315) <18 7 5 4 3>
   22    0 0xffffff7f80b28000 0x3000     0x3000     com.apple.security.TMSafetyNet (7) <7 6 5 4 2 1>
   23    2 0xffffff7f80bc9000 0x5000     0x5000     com.apple.kext.AppleMatch (1.0.0d1) <4 1>
   24    1 0xffffff7f80bce000 0x14000    0x14000    com.apple.security.sandbox (278.11.1) <23 7 6 5 4 3 2 1>
   25    0 0xffffff7f80be2000 0x7000     0x7000     com.apple.security.quarantine (3) <24 23 7 6 5 4 2 1>
   26    0 0xffffff7f82024000 0x8000     0x8000     com.apple.nke.applicationfirewall (153) <7 6 5 4 3 1>
   27    0 0xffffff7f81cd1000 0x3000     0x3000     com.apple.driver.AppleIntelCPUPowerManagementClient (217.92.1) <7 6 5 4 3 1>
   28    0 0xffffff7f81f8c000 0x3000     0x3000     com.apple.driver.AppleAPIC (1.7) <4 3>
   29    0 0xffffff7f81a47000 0x4000     0x4000     com.apple.driver.AppleSMBIOS (2.1) <7 4 3>
   30    0 0xffffff7f81d36000 0x3000     0x3000     com.apple.driver.AppleHPET (1.8) <10 7 5 4 3>
   31    0 0xffffff7f81ad4000 0x3000     0x3000     com.apple.AppleACPIPS2Nub (1.6.1) <10 7 4 3>
   32    0 0xffffff7f81a73000 0x7000     0x7000     com.apple.driver.AppleRTC (2.0) <10 5 4 3 1>
   33    0 0xffffff7f81639000 0x8000     0x8000     org.hwsensors.driver.ACPISensors (1315) <18 10 7 5 4 3>
   34    0 0xffffff7f81a4d000 0x7000     0x7000     com.apple.driver.AppleSmartBatteryManager (1) <10 5 4 3 1>
   35    4 0xffffff7f80e3c000 0x85000    0x85000    com.apple.iokit.IOHIDFamily (2.0.0) <14 7 6 5 4 3 2 1>
   36    0 0xffffff7f8201d000 0x4000     0x4000     com.apple.driver.AppleACPIButtons (2.0) <35 12 10 7 6 5 4 3 1>
   37    2 0xffffff7f81088000 0x4000     0x4000     com.apple.iokit.IOSMBusFamily (1.1) <5 4 3>
   38    0 0xffffff7f82014000 0x6000     0x6000     com.apple.driver.AppleACPIEC (2.0) <37 12 10 5 4 3>
   39    0 0xffffff7f81ada000 0x9000     0x9000     com.apple.driver.ApplePS2Controller (2.0.0) <5 4 3>
   40    1 0xffffff7f81f5f000 0x5000     0x5000     com.apple.driver.AppleEFIRuntime (2.0) <7 6 5 4 3>
   41    0 0xffffff7f82041000 0x4000     0x4000     com.apple.kext.AppleEFINVRAM (6.9.3) <7 5 4 3 1>
   42    0 0xffffff7f81f64000 0xa000     0xa000     com.apple.driver.AppleEFINVRAM (2.0) <40 7 6 5 4 3>
   43    8 0xffffff7f80dad000 0x6d000    0x6d000    com.apple.iokit.IOUSBFamily (683.4.0) <11 7 5 4 3 1>
   44    0 0xffffff7f80f4e000 0x18000    0x18000    com.apple.driver.AppleUSBEHCI (660.4.0) <43 11 7 5 4 3 1>
   45    3 0xffffff7f81371000 0x19000    0x19000    com.apple.iokit.IOAHCIFamily (2.6.5) <5 4 3 1>
   46    0 0xffffff7f81f91000 0x1a000    0x1a000    com.apple.driver.AppleAHCIPort (3.0.5) <45 11 5 4 3 1>
   47    0 0xffffff7f815bc000 0x1a000    0x1a000    net.osx86.kexts.GenericUSBXHCI (1.2.7) <43 11 7 5 4 3>
   48    0 0xffffff7f815f3000 0x17000    0x17000    org.hwsensors.driver.LPCSensors (1315) <18 11 10 7 5 4 3>
   49    0 0xffffff7f80ed1000 0x1d000    0x1d000    com.apple.driver.AppleUSBXHCI (683.4.0) <43 11 7 5 4 3 1>
   50    4 0xffffff7f80d6c000 0x34000    0x34000    com.apple.iokit.IONetworkingFamily (3.2) <7 6 5 4 3 1>
   51    1 0xffffff7f813bc000 0x80000    0x80000    com.apple.iokit.IO80211Family (600.31) <50 7 6 5 4 3 1>
   52    0 0xffffff7f8143c000 0x14a000   0x14a000   com.apple.driver.AirPort.Atheros40 (700.74.4) <51 50 11 7 5 4 3 1>
   53    0 0xffffff7f8114e000 0x33000    0x33000    com.apple.driver.AppleRTL8169Ethernet (1.1.4a5) <50 11 5 4 3 1>
   54    0 0xffffff7f80e2e000 0x3000     0x3000     com.apple.iokit.IOUSBUserClient (660.4.2) <43 7 5 4 3 1>
   55    0 0xffffff7f80f2f000 0x18000    0x18000    com.apple.driver.AppleUSBHub (683.4.0) <43 5 4 3 1>
   56    0 0xffffff7f81397000 0x18000    0x18000    com.apple.iokit.IOAHCIBlockStorage (2.6.0) <45 16 6 5 4 3 1>
   57    3 0xffffff7f8087c000 0x31000    0x31000    com.apple.iokit.IOSCSIArchitectureModelFamily (3.6.6) <5 4 3 1>
   58    0 0xffffff7f8138a000 0xd000     0xd000     com.apple.iokit.IOAHCISerialATAPI (2.6.1) <57 45 5 4 3 1>
   59    0 0xffffff7f818cc000 0x3000     0x3000     com.apple.driver.XsanFilter (404) <16 5 4 3 1>
   60    0 0xffffff7f81744000 0x9000     0x9000     com.apple.BootCache (35) <7 6 5 4 3 1>
   61    0 0xffffff7f81f49000 0x4000     0x4000     com.apple.AppleFSCompression.AppleFSCompressionTypeZlib (1.0.0d1) <6 4 3 2 1>
   62    0 0xffffff7f81f4f000 0x5000     0x5000     com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN (1.0.0d1) <6 4 3 2 1>
   63    0 0xffffff7f81f56000 0x3000     0x3000     com.apple.AppleFSCompression.AppleFSCompressionTypeDataless (1.0.0d1) <7 6 4 3 2 1>
   64    0 0xffffff7f81f5b000 0x2000     0x2000     com.apple.driver.AppleFileSystemDriver (3.0.1) <16 4 3>
   65    0 0xffffff7f81acf000 0x5000     0x5000     com.apple.driver.ApplePS2Keyboard (2.0.0) <35 5 4 3>
   66    0 0xffffff7f81aca000 0x5000     0x5000     com.apple.driver.ApplePS2Mouse (2.0.0) <35 5 4 3>
   67    0 0xffffff7f81091000 0x7000     0x7000     com.apple.iokit.SCSITaskUserClient (3.6.6) <57 16 5 4 3 1>
   68    3 0xffffff7f8109c000 0x11000    0x11000    com.apple.iokit.IOCDStorageFamily (1.7.1) <16 5 4 3 1>
   69    2 0xffffff7f810ad000 0xe000     0xe000     com.apple.iokit.IODVDStorageFamily (1.7.1) <68 16 5 4 3 1>
   70    1 0xffffff7f810bb000 0xc000     0xc000     com.apple.iokit.IOBDStorageFamily (1.7) <69 68 16 5 4 3 1>
   71    0 0xffffff7f810c7000 0x1e000    0x1e000    com.apple.iokit.IOSCSIMultimediaCommandsDevice (3.6.6) <70 69 68 57 16 5 4 3 1>
   72    0 0xffffff7f80eca000 0x7000     0x7000     com.apple.driver.AppleUSBComposite (656.4.1) <43 4 3 1>
   73    0 0xffffff7f80ec1000 0x9000     0x9000     com.apple.iokit.IOUSBHIDDriver (660.4.0) <43 35 5 4 3 1>
   74    6 0xffffff7f810ff000 0xa000     0xa000     com.apple.driver.IOPlatformPluginFamily (5.7.1d6) <10 7 6 5 4 3>
   75    1 0xffffff7f8110e000 0x14000    0x14000    com.apple.driver.IOPlatformPluginLegacy (1.0.0) <74 10 7 6 5 4 3>
   76    2 0xffffff7f81122000 0x15000    0x15000    com.apple.driver.AppleSMC (3.1.8) <10 7 5 4 3 1>
   77    0 0xffffff7f81137000 0x10000    0x10000    com.apple.driver.ACPI_SMC_PlatformPlugin (1.0.0) <76 75 74 11 10 7 6 5 4 3>
   78    2 0xffffff7f81d6b000 0xf000     0xf000     com.apple.iokit.IOHDAFamily (2.3.0f2) <5 4 3 1>
   79   14 0xffffff7f8118c000 0x43000    0x43000    com.apple.iokit.IOGraphicsFamily (2.4.1) <11 7 5 4 3 1>
   80    1 0xffffff7f81d7e000 0x16000    0x16000    com.apple.driver.AppleHDAController (2.3.0f2) <79 78 11 6 5 4 3 1>
   81    2 0xffffff7f81c5d000 0x6000     0x6000     com.apple.AppleGraphicsDeviceControl (3.6.22) <7 6 5 4 3 1>
   82    2 0xffffff7f81b7a000 0x72000    0x72000    com.apple.iokit.IOAcceleratorFamily2 (98.22) <79 11 7 6 5 4 3 1>
   83    0 0xffffff7f81c63000 0x57000    0x57000    com.apple.driver.AppleIntelFramebufferCapri (8.1.8) <82 81 79 11 10 7 6 5 4 3 1>
   84    0 0xffffff7f81109000 0x3000     0x3000     com.apple.driver.AppleSMCPDRC (1.0.0) <74 11 6 4 3>
   85    0 0xffffff7f81b46000 0x8000     0x8000     com.apple.driver.AppleIntelMCEReporter (104) <7 6 5 4 3>
   86    0 0xffffff7f81b23000 0x3000     0x3000     com.apple.driver.AppleLPC (1.7.0) <74 11 5 4 3>
   87    1 0xffffff7f81a36000 0x11000    0x11000    com.apple.driver.AppleSMBusController (1.0.12d1) <37 11 10 5 4 3>
   88    0 0xffffff7f81ae9000 0xe000     0xe000     com.apple.driver.AppleMCCSControl (1.2.5) <87 79 11 10 7 5 4 3 1>
   89    4 0xffffff7f811cf000 0x10000    0x10000    com.apple.iokit.IONDRVSupport (2.4.1) <79 11 7 5 4 3>
   90    2 0xffffff7f81f28000 0x5000     0x5000     com.apple.driver.AppleBacklightExpert (1.0.4) <89 79 11 5 4 3>
   91    0 0xffffff7f81f84000 0x5000     0x5000     com.apple.driver.AppleBacklight (170.3.5) <90 89 79 11 5 4 3>
   92    0 0xffffff7f81a33000 0x3000     0x3000     com.apple.driver.AppleSMBusPCI (1.0.12d1) <11 5 4 3>
   93    0 0xffffff7f81d12000 0x3000     0x3000     com.apple.driver.AppleHWAccess (1) <7 5 4 3>
   94    1 0xffffff7f81f25000 0x3000     0x3000     com.apple.driver.AppleGraphicsControl (3.6.22) <79 11 10 7 5 4 3 1>
   95    0 0xffffff7f81f2d000 0x14000    0x14000    com.apple.driver.AppleMuxControl (3.6.22) <94 90 79 11 10 7 6 5 4 3 1>
   96    1 0xffffff7f81073000 0x15000    0x15000    com.apple.iokit.IOSurface (91.1) <7 5 4 3 1>
   97    0 0xffffff7f81bec000 0x4c000    0x4c000    com.apple.driver.AppleIntelHD4000Graphics (8.2.8) <96 82 79 11 7 5 4 3 1>
   98    0 0xffffff7f8165c000 0x5000     0x5000     com.apple.Dont_Steal_Mac_OS_X (7.0.0) <76 7 4 3 1>
   99    0 0xffffff7f81290000 0xad000    0xad000    com.apple.iokit.IOBluetoothFamily (4.2.6f1) <43 15 7 5 4 3 1>
  100    1 0xffffff7f8126b000 0x11000    0x11000    com.apple.iokit.IOSerialFamily (10.0.7) <7 6 5 4 3 1>
  101    0 0xffffff7f8127c000 0xa000     0xa000     com.apple.iokit.IOBluetoothSerialManager (4.2.6f1) <100 7 5 4 3 1>
  102    0 0xffffff7f81921000 0x5000     0x5000     com.apple.driver.AppleUpstreamUserClient (3.5.13) <79 11 10 7 5 4 3 1>
  103    0 0xffffff7f80da0000 0x7000     0x7000     com.apple.iokit.IOUserEthernet (1.0.0d1) <50 6 5 4 3 1>
  104    2 0xffffff7f8175a000 0x12000    0x12000    com.apple.kext.OSvKernDSPLib (1.14) <5 4>
  105    3 0xffffff7f8176c000 0x37000    0x37000    com.apple.iokit.IOAudioFamily (1.9.7fc2) <104 5 4 3 1>
  106    1 0xffffff7f81d94000 0xbf000    0xbf000    com.apple.driver.DspFuncLib (2.3.0f2) <105 104 5 4 3 1>
  107    0 0xffffff7f81e53000 0x7b000    0x7b000    com.apple.driver.AppleHDA (2.3.0f2) <106 105 89 80 79 78 6 5 4 3 1>
  108    0 0xffffff7f81d7a000 0x2000     0x2000     com.apple.driver.AppleHDAHardwareConfigDriver (2.3.0f2) <4 3>
  109    1 0xffffff7f80b72000 0x5000     0x5000     com.apple.kext.triggers (1.0) <7 6 5 4 3 1>
  110    0 0xffffff7f8174f000 0x9000     0x9000     com.apple.filesystems.autofs (3.0) <109 7 6 5 4 3 1>
  111    0 0xffffff7f81f0b000 0x12000    0x12000    com.apple.driver.AGPM (100.14.11) <89 81 79 74 11 5 4 3>
  112    0 0xffffff7f8192a000 0x9000     0x9000     com.apple.driver.AppleTyMCEDriver (1.0.2d2) <74 11 10 7 6 5 4 3 1>
  113    0 0xffffff7f81d09000 0x5000     0x5000     com.apple.driver.AppleHWSensor (1.9.5d0) <5 4 3>
  114    2 0xffffff7f80bf5000 0x56000    0x56000    com.apple.filesystems.ntfs (3.11) <7 6 5 4 1>
  115    1 0xffffff7f81649000 0xd000     0xd000     com.apple.filesystems.exfat (1.4) <7 5 4 1>
  116    0 0xffffff7f817a3000 0x5000     0x5000     com.apple.driver.AudioAUUC (1.60) <105 79 11 10 7 5 4 3 1>
  117    0 0xffffff7f80c4f000 0xe000     0xe000     com.apple.filesystems.msdosfs (1.9) <7 5 4 1>

[styrian]

Hello!

 

Try to hex edit the framebufferCapri with hexfiend manually by using the values from the script of Lejenk and ID from his guide (link in post above yours).

I don´t know, if the script is working on 10 9. But backup untouched framebuffercapri before editing.

 

Best deal for you would be, if you have an other working OSX install on your device, if something is going wrong to be able to correct it easy. (or using CCC to clone your partial working install)

 

If you are on Clover you can do the patch on the fly and you never need to touch original framebuffer Capri after updates. With Clover create a temporary bootstick (size of some 100 mb are enough), msdos fat 32 formated and install Clover on it, copy over your existing working Clover files, and try to edit the on the fly patch in config.plist and boot with it afterwards by ignoring caches.

 

Have fun.

[gnome.kde]

Hi styrian, thank you for your answer,
I have read every post of Lejenk but i have not found solution.
The kext that I have use successfully on mac os x 10.9.x (with x < 4) not work with 10.9.4. I have also tried a new clean installation with 10.9.4. But nothing: QE_CI not work and screen flicker!
The only interesting thing that I noticed is that when I finish the new clean installation with mac os x 10.9.4, when I rebooted using only the USB key, QE_CI works perfectly!
It is possible that the problem is the AppleIntelCPUPowerManagement.kext that is not use with the usb key, but it use NullCPUPowerManagement...

[styrian]

Hello!

 

Which settings are you using on Usb stick in org. chameleon.boot.plist. Have you a DSDT.aml in it´s Extra?

 

Have fun.

[gnome.kde]

On my usb stick I use the extra folder shared by miha77 to the first post  (you can download it here http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=134771 ).

I use 100% the guide of this topic (created by miha77),  but only with mac os x 10.9.4 QE_CI not work and screen flicker!

[styrian]

Hello!

 

Look at the post of Lejenk above your first post in the thread.

 

I have personally the same opinon as Lejenk. Forget this method.

 

You are nearly for sure further on your own here, by doing your install with in post one of this thread  suggested methods.

 

Lejenk´s method has worked fine on ML and as he stated by himself, it is still working on Mav.

 

The by Miha used tools are altering unnecessary default values. If you want to get perhaps encrypted files on your device, by following the suggestions for using especial, here not supported tools, you can do it for sure. It´s to your own. If you want really to use them and have gotten problems by using them, please hand over to the platform, where they have been "created", and ask there for support.

 

Have fun.

[gnome.kde]

I'm sorry, you're right! With Lejenk method, mavericks not work.

 

I will try in other method!

[styrian]

Hello!

 

Do you havve the untouched AppleIntelFrambufferCapri.kext?

 

Have fun.

[gnome.kde]

Yep!

[styrian]

Hello!

 

Install a copy of the untouched one to S/L/E of your current OSX installation after backup the one you have in S/L/E. Then try, If the patch of first post of his guide is working. If it is working, copy the pached one to a save place, outside /S/L/E for later usage.

 

Install back the one you have used til now and reboot with flags -f v.

 

I have written a small guide for doing an installer from ESD image for an other guy without using any of the automated tools. There is no change, that you produce any garbage. Let me know, if the patch is working and if you want to follow about 20 small steps to get your system hopefully up with working QE/CI.

 

Have fun.

[JEssefowler]

So, everything works perfectly, well done. One problem, though, I still use the default wifi card (I know it won't work), but i also Can't get ethernet to work either. help? 

[karlamba]

So, everything works perfectly, well done. One problem, though, I still use the default wifi card (I know it won't work), but i also Can't get ethernet to work either. help? 

 

Do you have still problems with Ethernet on your Mavericks? On my Mavericks with kext downloaded from realtek site I have 100Mb/s finally working. If you still need it I can check my settings and sent you working kext... cheers!