weaksauce12 Posted November 3, 2009 Share Posted November 3, 2009 I threw it into an auto-installer: http://j.mp/3LM0Ep The installer renames any existing R1000 file to .old, copies in the new file, sets permissions, and resets the Mkext bundle. Just reboot after installation to get it working! Link to comment Share on other sites More sharing options...
blackosx Posted November 3, 2009 Share Posted November 3, 2009 I threw it into an auto-installer: http://j.mp/3LM0Ep The installer renames any existing R1000 file to .old, copies in the new file, sets permissions, and resets the Mkext bundle. Just reboot after installation to get it working! Fantastic. Well done Bit Shoveler and Weaksauce. Note: Weaksauce12, your inbox is full Link to comment Share on other sites More sharing options...
weaksauce12 Posted November 3, 2009 Share Posted November 3, 2009 Fantastic. Well done Bit Shoveler and Weaksauce.Note: Weaksauce12, your inbox is full Full, as usual Fixed, thanks! Link to comment Share on other sites More sharing options...
cwall64 Posted November 4, 2009 Share Posted November 4, 2009 Works perfect on my Gigabyte EP45-UD3P under 64-bit Snow Leopard! BIG THANKS!! Works perfect on my GA-EP45-UD3P under 64-bit Snow Leopard, using stellarola's EP45-UD3P Installer v2 (http://stellarola.tumblr.com/post/213983683/ep45-ud3p-installer-v2-halloween-edition) and this kext. Thanks to all - I was getting tired of setting PROMISC on eh0 at every boot!!! Link to comment Share on other sites More sharing options...
weaksauce12 Posted November 4, 2009 Share Posted November 4, 2009 Works perfect on my GA-EP45-UD3P under 64-bit Snow Leopard, using stellarola's EP45-UD3P Installer v2 (http://stellarola.tumblr.com/post/213983683/ep45-ud3p-installer-v2-halloween-edition) and this kext. Thanks to all - I was getting tired of setting PROMISC on eh0 at every boot!!! Haha yeah. I have an updated installer: (part of my script was cutoff somehow, plus the mkext cache stuff is relocated in Snow, so I just deleted that section - it will auto-regenerate @ reboot anyway) http://www.mediafire.com/?n2ciymqmdgw Link to comment Share on other sites More sharing options...
pao13 Posted November 5, 2009 Share Posted November 5, 2009 MOBO EP45-DS4 with snow leopard 10.6.1 and dsdt patch both dual lan works fine!!! thank for all for this kext is amazing!! Link to comment Share on other sites More sharing options...
weaksauce12 Posted November 5, 2009 Share Posted November 5, 2009 After testing it for a few days, everything is stable & works properly. The only bug I've noticed is that network performance takes a serious hit - I typically get 27 MB/s transfer on my network (Gigabit LAN to a RAID NAS using FTP); with R1000SL I only get 7.6 MB/s, so I'm only getting about 1/3 the speed I'm supposed to. But, AFP/Bonjour work, wake from sleep works, Internet works, etc. Link to comment Share on other sites More sharing options...
swinte Posted November 5, 2009 Share Posted November 5, 2009 I installed this on my Gigabyte GA-EP35-DS3L last night using WeakSauce12's installer and so far AFP, bonjour, etc. are all working great! Thanks to everyone who helped put this together, your work is greatly appreciated. I'll try this on my ECS 945GCT-M/1333 tonight and see how it works with the onboard RTL8101E. Link to comment Share on other sites More sharing options...
d00d Posted November 5, 2009 Share Posted November 5, 2009 After testing it for a few days, everything is stable & works properly. The only bug I've noticed is that network performance takes a serious hit - I typically get 27 MB/s transfer on my network (Gigabit LAN to a RAID NAS using FTP); with R1000SL I only get 7.6 MB/s, so I'm only getting about 1/3 the speed I'm supposed to. But, AFP/Bonjour work, wake from sleep works, Internet works, etc. You might need to manually set 1000/full, see http://www.insanelymac.com/forum/index.php...097&st=900#. Link to comment Share on other sites More sharing options...
rheneas Posted November 5, 2009 Share Posted November 5, 2009 I installed this on my Gigabyte GA-EP35-DS3L last night using WeakSauce12's installer and so far AFP, bonjour, etc. are all working great! Thanks for putting this together DaemonES, your work is greatly appreciated. Would you mind describing the steps you used to make this work? I've tried Weaksauce12's latest app, his previous app, and Sonotone's installer, but without success. Snow Leopard simply will not recognize my adapter. Thanks for any help you can provide. Link to comment Share on other sites More sharing options...
@ROBASEFR Posted November 6, 2009 Share Posted November 6, 2009 Would you mind describing the steps you used to make this work? I've tried Weaksauce12's latest app, his previous app, and Sonotone's installer, but without success. Snow Leopard simply will not recognize my adapter. Thanks for any help you can provide. You could have some cache problems ! Best success is with manual LAN IP configs ! Link to comment Share on other sites More sharing options...
rheneas Posted November 6, 2009 Share Posted November 6, 2009 You could have some cache problems ! Best success is with manual LAN IP configs ! Thanks. What do you mean by cache problems? How would I fix that? I've tried manually configuring in Network prefs, and assigning a static IP (my router uses dynamic IP)...nothing works. Ethernet OOB, though. Maybe the new Ralink driver, when ported to PCI, will save the day for me. Link to comment Share on other sites More sharing options...
accel Posted November 6, 2009 Share Posted November 6, 2009 You might need to manually set 1000/full, see http://www.insanelymac.com/forum/index.php...097&st=900#. Thx!! This is what worked for me. Go to System Preferences > Network > Advanced > Ethernet > and set it to > manual > 1000baseT and Full Duplex Now you have Gigabit speeds in 64bit See this post Link to comment Share on other sites More sharing options...
swinte Posted November 6, 2009 Share Posted November 6, 2009 Would you mind describing the steps you used to make this work? I've tried Weaksauce12's latest app, his previous app, and Sonotone's installer, but without success. Snow Leopard simply will not recognize my adapter. Thanks for any help you can provide. For me it was just a matter of running WeakSauce12's installer and rebooting. In my case, the interface was recognized previously but I wasn't able to connect to AFP volumes. Link to comment Share on other sites More sharing options...
BarboneNet Posted November 7, 2009 Share Posted November 7, 2009 on my mobo don't works this driver Link to comment Share on other sites More sharing options...
usario clave Posted November 8, 2009 Share Posted November 8, 2009 I downloaded the Realtek R1000 driver from psystar for my MSI wind PC. There seem to be a couple of minor weird things in it: 1. max_interrupt_work is incorrect. R1000Interrupt loops max_interrupt_work times, and R1000RxInterrupt and R1000TxInterrupt also run max_interrupt_work. That means the driver is doing way too much work at interrupt time. It's processing max_interrupt_work * (max_interrupt_work + max_interrupt_work) packets per interrupt maximum. Replace the while loop checks with constants and tweak. I changed mine to 10. 2. netif->flushInputQueue() can be moved outside the while loop in R1000RxInterrupt. There's no reason to flush every packet...and it probably slows things down somewhat. These changes seem to have smoothed out the througput. Before, it would jump between 21-23 and 5. Now, it jumps around the high to low tens. CPU seems to be lower as well. Link to comment Share on other sites More sharing options...
@ROBASEFR Posted November 8, 2009 Share Posted November 8, 2009 Thanks. What do you mean by cache problems? How would I fix that? I've tried manually configuring in Network prefs, and assigning a static IP (my router uses dynamic IP)...nothing works. Ethernet OOB, though. Maybe the new Ralink driver, when ported to PCI, will save the day for me. Delete in Library/Preferences/Systemconfiguration -com.apple.network.identification.plist -NetworkInterfaces.plist -preferences.plist Clear Caches with Onyx ! http://www.titanium.free.fr/pgs2/english/download.html Link to comment Share on other sites More sharing options...
rheneas Posted November 10, 2009 Share Posted November 10, 2009 Delete in Library/Preferences/Systemconfiguration-com.apple.network.identification.plist -NetworkInterfaces.plist -preferences.plist Clear Caches with Onyx ! http://www.titanium.free.fr/pgs2/english/download.html Thank you! I'm giving that a try now. I did not have com.apple.network.identification.plist in that folder, but I've deleted the others and will run the Titanium app! Update: After I removed those files, SL booted up. I began to run the Onyx app and my system crashed. Link to comment Share on other sites More sharing options...
@ROBASEFR Posted November 10, 2009 Share Posted November 10, 2009 Thank you! I'm giving that a try now. I did not have com.apple.network.identification.plist in that folder, but I've deleted the others and will run the Titanium app! Update: After I removed those files, SL booted up. I began to run the Onyx app and my system crashed. You should have run Onyx clean cache before reboot ! It's normal that you hadn't com.apple.network.identification.plist because you couldn't assign network ! Try to boot with option -x bootflag (With chameleon for example) Hope this helps Link to comment Share on other sites More sharing options...
NidVhegg Posted November 11, 2009 Share Posted November 11, 2009 i know it's maybe not the correct thread but... I need to get my DWL G122 Rev C1 (RT2500 as i know) working on SL. I've already installed the latest drivers form d-link for 10.5, but Snow Leo does not recognize my stick. The USBWirelessUtility always says 'No Device!!', the same when i boot with -f. please can someone help me Link to comment Share on other sites More sharing options...
pechspilz Posted November 12, 2009 Share Posted November 12, 2009 kextload /System/Library/Extensions/RealtekR1000.kext Requesting load of /System/Library/Extensions/RealtekR1000.kext. /System/Library/Extensions/RealtekR1000.kext failed to load - (libkern/kext) dependency resolution failure; check the system/kernel logs for errors or try kextutil(8). I must admit I didn't read through the previous 35 pages. Does anyone know what I'm doing wrong? Link to comment Share on other sites More sharing options...
@ROBASEFR Posted November 12, 2009 Share Posted November 12, 2009 kextload /System/Library/Extensions/RealtekR1000.kextRequesting load of /System/Library/Extensions/RealtekR1000.kext. /System/Library/Extensions/RealtekR1000.kext failed to load - (libkern/kext) dependency resolution failure; check the system/kernel logs for errors or try kextutil(8). I must admit I didn't read through the previous 35 pages. Does anyone know what I'm doing wrong? Try the SL1000 installer from Weaksauce12 at post 653 Link to comment Share on other sites More sharing options...
pechspilz Posted November 12, 2009 Share Posted November 12, 2009 Thanks! I was actually using kext helper to install it and it didn't work at first (because I got hold of the non-SL version) but it's working now. Which is close to fantastic because multicast (and thus bonjour) is back on my Asus P6T even in 64 bit kernel mode. Kudos to everyone involved! Hurray!! Link to comment Share on other sites More sharing options...
lj83 Posted November 13, 2009 Share Posted November 13, 2009 Hi I have installed the RealtekR1000.kext on my M912x Gigabyte - ideneb 1.5.5. In System profile>Network; I see one interfaz ethernet (en0) connected. But in Utilities>Network Utilities ; I see this Mac Adresss FF:FF:FF:FF:FF:FF and this isnt correct. The model is RTL8169. I can not connect to my router. Sorry for my english. Can help me anybody? Thnks Link to comment Share on other sites More sharing options...
@ROBASEFR Posted November 13, 2009 Share Posted November 13, 2009 Hi I have installed the RealtekR1000.kext on my M912x Gigabyte - ideneb 1.5.5. In System profile>Network; I see one interfaz ethernet (en0) connected. But in Utilities>Network Utilities ; I see this Mac Adresss FF:FF:FF:FF:FF:FF and this isnt correct. The model is RTL8169. I can not connect to my router. Sorry for my english. Can help me anybody? Thnks Look in my posts #602 and 668 For Leopard de RTG 2.03.pkg is 100% for RTL8169/8111 Cleanup before install and reboot after cleaning up the old preferences! It might be necessary to control and adjust speed controls in System preferences/Internet preferences Hope this helps Link to comment Share on other sites More sharing options...
Recommended Posts