[SOLVED] Asus ROG laptops with Kepler cards not detecting DP-2 connected LCD display

gazzacbr · March 24, 2014

Oh I know you are booting using Nvidia Web Drivers, but I need an IOReg using Apple Official Nvidia Drivers, if you are using Clover just enter in Options on Boot menu you will see the NVDA_drv=1 option type enter on it and delete it, type enter again and select return, it will get you back to the boot screen. Select your Mac partition and boot. Take the IOReg and after reboot the Nvidia web driver will load again automatically.

We need a new thread about getting all working on the G750. In your IOReg saves I see you aren't using CPU Power management and with Voodoo you don't get the subwoofer working either.

Good luck

Hi,

IOReg with Apple drivers will be the same as before?

With Apple drivers and efi string laptop still does not boot from the lcd only and now it actually does not boot with the Apple drivers and a monitor attached.

Its only booting with nvidia drivers and your efi string.

Where to start a new thread for the G750?

yisl04 · March 24, 2014

Great!!!, I was right after all, there are some test to get all working, I mean for understand a little bit more. Please boot using Apple Nvidia Drivers and if it works, share and IORegistry explorer save.

I have a lot more good stuff for the G750, CPU power Management full working, Audio with 2.1 sound using AppleHDA, Keyboard Backlight (thanks to EMlyDinEsH and his Elan Driver even Auto off feature works!!), Brightness backlight control for the display, so please PM me for further instructions.

Good Luck

Edit: Ohh I almost forget to tell you, please mark the thread as solved.

We can try, please share an IORegistry save file. Is your machine using 120Hz Display?

Good Luck to all

Hello, my laptop is G55VW-DH71 and the display is not 3D. The graphics card is GTX 660M 2G. I want to make the EFI string by gfxutil, but the EFI string doesn't work, I need your help.

The information of my graphics card is below:

Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
VGA-0 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x27d
	Timestamp:  23226
	Subpixel:   unknown
	Clones:    
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	SignalFormat:	VGA
		supported: VGA         
	ConnectorType:	VGA
	ConnectorNumber: 1 (0x00000001)
	_ConnectorLocation: 1 (0x00000001)
LVDS-0 connected 1920x1080+0+0 (0x27f) normal (normal left inverted right x axis y axis) 344mm x 194mm
	Identifier: 0x27e
	Timestamp:  23226
	Subpixel:   unknown
	Gamma:      1.0:1.0:1.0
	Brightness: 1.0
	Clones:    
	CRTC:       0
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	EDID:
		00ffffffffffff0030e4d90200000000
		00140104902213780a15d59e59509826
		0e505400000001010101010101010101
		0101010101017e3680b070381f403020
		350058c210000018542480b070381f40
		3020350058c210000018000000fe004d
		43364a4e813135365746310a00000000
		000041319e0000000002010a20200030
	SignalFormat:	LVDS
		supported: LVDS        
	ConnectorType:	Panel
	ConnectorNumber: 0 (0x00000000)
	_ConnectorLocation: 0 (0x00000000)
  1920x1080 (0x27f)  139.5MHz -HSync -VSync *current +preferred
        h: width  1920 start 1968 end 2000 total 2096 skew    0 clock   66.6KHz
        v: height 1080 start 1083 end 1088 total 1111           clock   59.9Hz
  1920x1080 (0x280)   93.0MHz -HSync -VSync
        h: width  1920 start 1968 end 2000 total 2096 skew    0 clock   44.4KHz
        v: height 1080 start 1083 end 1088 total 1111           clock   39.9Hz
DP-0 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x281
	Timestamp:  23226
	Subpixel:   unknown
	Clones:    
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	SignalFormat:	TMDS
		supported: TMDS        
	ConnectorType:	DisplayPort
	ConnectorNumber: 3 (0x00000003)
	_ConnectorLocation: 3 (0x00000003)
HDMI-0 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x282
	Timestamp:  23226
	Subpixel:   unknown
	Clones:    
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	SignalFormat:	TMDS
		supported: TMDS        
	ConnectorType:	HDMI
	ConnectorNumber: 2 (0x00000002)
	_ConnectorLocation: 2 (0x00000002)
DP-1 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x283
	Timestamp:  23226
	Subpixel:   unknown
	Clones:    
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	SignalFormat:	DisplayPort
		supported: DisplayPort 
	ConnectorType:	DisplayPort
	ConnectorNumber: 3 (0x00000003)
	_ConnectorLocation: 3 (0x00000003)

and the plist file for gfxutil is below:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)</key>
	<dict>
		<key>@0,compatible</key>
		<string>NVDA,NVMac</string>
		<key>@0,connector-type</key>
		<data>
		AgAAAA==
		</data>
		<key>@0,device_type</key>
		<string>display</string>
		<key>@0,name</key>
		<string>NVDA,Display-A</string>
		<key>@1,compatible</key>
		<string>NVDA,NVMac</string>
		<key>@1,connector-type</key>
		<data>
		EAAAAA==
		</data>
		<key>@1,device_type</key>
		<string>display</string>
		<key>@1,name</key>
		<string>NVDA,Display-B</string>
		<key>NVCAP</key>
		<data>
		BQAAAAAAAwAMAAAAAAAADwAAAAA=
		</data>
		<key>NVPM</key>
		<data>
		AQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA==
		</data>
		<key>VRAM,totalsize</key>
		<data>
		AAAAgA==
		</data>
		<key>device_type</key>
		<string>NVDA,Parent</string>
		<key>model</key>
		<string>NVIDIA GeForce GTX 660M</string>
		<key>name</key>
		<string>display</string>
		<key>rom-revision</key>
		<string>NVIDIA GeForce GTX 660M</string>
	</dict>
</dict>
</plist>

So I don't where is wrong, maybe the connector-type or NVCAP, I set @0,connector-type 0x02000000(LVDS) and @1,connector-type 0x10000000(VGA). Please help me, thank you in advance.

beton3009 · March 26, 2014

what about g75vx with gtx 670 mx brothers/.?????

beton3009 · March 26, 2014

need help mr areos i don't wont to sel my laptop and i'm stuck at this card status HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP

beton3009 · March 27, 2014

is this card so dificult ?

AREOS · March 27, 2014

Hi,

@AREOS: Sometimes ago, you help me with my Alienware M17XR4 to try to make the screen work. I'm in the same situation now. I have a 120HZ screen and a GTX680M. With 10.9.1 I can boot with a VGA screen attached and get full acceleration on external screen and nothing on internal one. With 10.9.2 nothing work. I try VGA, HDMI and internal without success with both drivers (Apple and Web). I boot up removing all NVDA*.kext (not web) and without nvda_drv=1 in order to get to the desktop and make a ioreg dump.

For now DMOS is a bit a mess because it's hard to work on it without screen ^^.

I hope you can make magic for me.

Thanks a lot.

Your IOreg is corrupted try one more time using IORegistry Explorer V2, if you got an IOReg save from when you use 10.9.1 it will be great cause I can see what are your ports. Remember Asus Usually gets detected as port02 and Alienware as port 09.

Hello, my laptop is G55VW-DH71 and the display is not 3D. The graphics card is GTX 660M 2G. I want to make the EFI string by gfxutil, but the EFI string doesn't work, I need your help.

The information of my graphics card is below:

Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
VGA-0 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x27d
	Timestamp:  23226
	Subpixel:   unknown
	Clones:    
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	SignalFormat:	VGA
		supported: VGA         
	ConnectorType:	VGA
	ConnectorNumber: 1 (0x00000001)
	_ConnectorLocation: 1 (0x00000001)
LVDS-0 connected 1920x1080+0+0 (0x27f) normal (normal left inverted right x axis y axis) 344mm x 194mm
	Identifier: 0x27e
	Timestamp:  23226
	Subpixel:   unknown
	Gamma:      1.0:1.0:1.0
	Brightness: 1.0
	Clones:    
	CRTC:       0
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	EDID:
		00ffffffffffff0030e4d90200000000
		00140104902213780a15d59e59509826
		0e505400000001010101010101010101
		0101010101017e3680b070381f403020
		350058c210000018542480b070381f40
		3020350058c210000018000000fe004d
		43364a4e813135365746310a00000000
		000041319e0000000002010a20200030
	SignalFormat:	LVDS
		supported: LVDS        
	ConnectorType:	Panel
	ConnectorNumber: 0 (0x00000000)
	_ConnectorLocation: 0 (0x00000000)
  1920x1080 (0x27f)  139.5MHz -HSync -VSync *current +preferred
        h: width  1920 start 1968 end 2000 total 2096 skew    0 clock   66.6KHz
        v: height 1080 start 1083 end 1088 total 1111           clock   59.9Hz
  1920x1080 (0x280)   93.0MHz -HSync -VSync
        h: width  1920 start 1968 end 2000 total 2096 skew    0 clock   44.4KHz
        v: height 1080 start 1083 end 1088 total 1111           clock   39.9Hz
DP-0 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x281
	Timestamp:  23226
	Subpixel:   unknown
	Clones:    
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	SignalFormat:	TMDS
		supported: TMDS        
	ConnectorType:	DisplayPort
	ConnectorNumber: 3 (0x00000003)
	_ConnectorLocation: 3 (0x00000003)
HDMI-0 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x282
	Timestamp:  23226
	Subpixel:   unknown
	Clones:    
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	SignalFormat:	TMDS
		supported: TMDS        
	ConnectorType:	HDMI
	ConnectorNumber: 2 (0x00000002)
	_ConnectorLocation: 2 (0x00000002)
DP-1 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x283
	Timestamp:  23226
	Subpixel:   unknown
	Clones:    
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	SignalFormat:	DisplayPort
		supported: DisplayPort 
	ConnectorType:	DisplayPort
	ConnectorNumber: 3 (0x00000003)
	_ConnectorLocation: 3 (0x00000003)

and the plist file for gfxutil is below:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)</key>
	<dict>
		<key>@0,compatible</key>
		<string>NVDA,NVMac</string>
		<key>@0,connector-type</key>
		<data>
		AgAAAA==
		</data>
		<key>@0,device_type</key>
		<string>display</string>
		<key>@0,name</key>
		<string>NVDA,Display-A</string>
		<key>@1,compatible</key>
		<string>NVDA,NVMac</string>
		<key>@1,connector-type</key>
		<data>
		EAAAAA==
		</data>
		<key>@1,device_type</key>
		<string>display</string>
		<key>@1,name</key>
		<string>NVDA,Display-B</string>
		<key>NVCAP</key>
		<data>
		BQAAAAAAAwAMAAAAAAAADwAAAAA=
		</data>
		<key>NVPM</key>
		<data>
		AQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA==
		</data>
		<key>VRAM,totalsize</key>
		<data>
		AAAAgA==
		</data>
		<key>device_type</key>
		<string>NVDA,Parent</string>
		<key>model</key>
		<string>NVIDIA GeForce GTX 660M</string>
		<key>name</key>
		<string>display</string>
		<key>rom-revision</key>
		<string>NVIDIA GeForce GTX 660M</string>
	</dict>
</dict>
</plist>

So I don't where is wrong, maybe the connector-type or NVCAP, I set @0,connector-type 0x02000000(LVDS) and @1,connector-type 0x10000000(VGA). Please help me, thank you in advance.

what about g75vx with gtx 670 mx brothers/.?????

For G55 and G75 users see this, your issue is related to something else http://www.insanelymac.com/forum/topic/284767-anyone-mobile-kepler-6xxm-working/?p=2007745.

Good Luck

Pahcixam · March 30, 2014

Your IOreg is corrupted try one more time using IORegistry Explorer V2, if you got an IOReg save from when you use 10.9.1 it will be great cause I can see what are your ports. Remember Asus Usually gets detected as port02 and Alienware as port 09.

Hi.

Thanks you for taking some time for us. I make a fresh installation of 10.9.1 and make a save with IO Registry Explorer v2.1. I hope this time it'll be correct.

You can find it in attachement.

ioreg_10.9.1_VGA.zip

Pahcixam · April 10, 2014

Hi.

A little up for Areos. Did you find any solution for me since last week ?

Thank you for your help.

gazzacbr · April 10, 2014

@Pahcixam: maybe better to start a new thread as this one is solved and you dont even have the same laptop...

Rikoshet · May 26, 2014

Hi guys!

How about power management of graphic card? Does it work for you? ANy guide?

Thanks!

Rikoshet · June 12, 2014

No one?

bearloverpr · July 6, 2014

Wondering if you can check the IOREG of this laptop. Clevo P370SM3 / Sager NP9380 Nvidia GTX 780m, I cant find a way to make the main monitor work, everithing works fine with the external monitor.

Rikoshet · July 30, 2014

Wondering if you can check the IOREG of this laptop. Clevo P370SM3 / Sager NP9380 Nvidia GTX 780m, I cant find a way to make the main monitor work, everithing works fine with the external monitor.

What hapen if you delete nvstartup.kext? Could you see something on your internal monitor? Ofcourse without GE/CI...

NiPeGun · August 12, 2014

Guys, I created a web yesterday, to centralize all stuff related to hackintoshing Asus ROG Notebooks and motherboards. ONLY for Asus ROG products. Not normal Asus products. The web is:

www.roghackintosh.org

Right now I´m creating all the structure for the database and forums. So, it is possible you can´t find your notebook or motherboard. Be patient. Maybe in a few days you can find it operative. I mean, it is operative already, but since the forum will be in english, spanish, french, russian, chinese, portuguese, hebrew, etc, It will take me some time to create all forum structure for all languajes.

If you are and advanced hackintosh user with ROG hardware, and want to help, contact me at contact@roghackintosh.org If you know other languaje than spanish or english I will need your help for sure.

I´m excited with the idea. With a little help from the insanelymac community, we can build a solid ROG hackintosh encyclopedia.

Regards.

sendromx · December 1, 2015

Hi,

I followed almost all guides on the net about hackintoshing and nvidia cards. last night I saw your solution on insanelymac about nvidia keppler cards for asus laptops.
And I have a laptop Tosiba Qosmio X870 which is very similar to ASUS.
I7 3630 Qm, 16 GB Ram, Nvidia GTX 670m 3GB, Atheros Ethernet, Intel HM67 chipset, etc,
I am working to install a properly working hackintosh on this machine nearly for 2 months. Unfortunately, I am still at the beginning.
I am Following the tonymacs ELCapitan guide for installation process. Also no DSDT or SSDT patching was applied. I dont know ıf I really need the patching. Even I need, I dont know how to apply. Once I tried but the system has crashed. So please understand me that I am very poor on Mac system or hackintoshing Although I really understand about Windows based system. It doesnot help on hackintoshing.
My Problem is I cannot reach the installation proces without the command nv_disable=1.
With this command I can install el capitan. After Insatallation with the necessary kexts, Sound, keyboard, trackpad almost everything Works perfect.
System recognizes the graphic card perfectly name and RAM size are correct. BUT no QE/CI enabled. I tried every version of nvidia web drivers with every version of smbios configuration, from macbook to IMAC. Nothing changed. When I disable the boot flag nv_disable=1 from clover configurator the laptop boots, but the screen is garbled and nothing seen on the screen. I am sure the system is working properly on the back ground. BUT nothing on the screen accept garble. when I dont enable nvdrive=1 or inject nvidia on GPU section on clover, the system doesnot recognize the nvidia and only shows 7MB RAM.
After reading the discussion about [sOLVED] Asus ROG laptops with Kepler cards not detecting DP-2 connected LCD display topic, I tried with HDMI cable, and VGA monitor (These are not working also) nothing changed.
I also tried your recommendations it did not help. Perhaps I couldnot do the right hex patch.
Please help me. I really need HAckintosh with full graphic features on my laptop.
I am sorry for my poor English.
Any help is apreciated.
THANKS A LOT.

[SOLVED] Asus ROG laptops with Kepler cards not detecting DP-2 connected LCD display

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites