Leumas1311 Posted March 28, 2015 Share Posted March 28, 2015 Thanks for the response and offer! I'm really grateful for your help! When I was experimenting with booting os's from the clover USB I tried booting into windows, there were 4 different options for windows so I systematically went through them in an attempt to get into windows. However, on the 2nd one, it failed to boot, not even into the BIOS and ever since then I have been unable to get into the BIOS or any operation system! I hope I haven't done something stupid... I called ASUS support and they walked me through trouble shooting things, we came to the conclusion that both of my BIOS chips have gone bad, does this sound right? Anyway, unless you have a solution to this, I'm going to have to order new chips on Monday and then replace them to continue... Thanks for all your help, Leumas Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2123730 Share on other sites More sharing options...
IIIdefconIII Posted March 28, 2015 Author Share Posted March 28, 2015 Thanks for the response and offer! I'm really grateful for your help! When I was experimenting with booting os's from the clover USB I tried booting into windows, there were 4 different options for windows so I systematically went through them in an attempt to get into windows. However, on the 2nd one, it failed to boot, not even into the BIOS and ever since then I have been unable to get into the BIOS or any operation system! I hope I haven't done something stupid... I called ASUS support and they walked me through trouble shooting things, we came to the conclusion that both of my BIOS chips have gone bad, does this sound right? Anyway, unless you have a solution to this, I'm going to have to order new chips on Monday and then replace them to continue... Thanks for all your help, Leumas I have this sometimes while adding uefi too, it resolves when i disconnect the hdds, so bios cannot read bootloader anymore, then boot. Then shutdown, connect the windows hdd, then try again Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2123860 Share on other sites More sharing options...
hackformore Posted April 4, 2015 Share Posted April 4, 2015 @IIIdefconIII Can you tell me how to patch battery status or you have any text patch file? I have MSI Ge60- 2pe seem like gt 70 about battery. I have check the dsdt you attach but can not find the patch. Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2125296 Share on other sites More sharing options...
IIIdefconIII Posted April 5, 2015 Author Share Posted April 5, 2015 @IIIdefconIII Can you tell me how to patch battery status or you have any text patch file? I have MSI Ge60- 2pe seem like gt 70 about battery. I have check the dsdt you attach but can not find the patch. Sorry i didnt patch my dsdt myself.. you have custom applebatterykext? Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2125387 Share on other sites More sharing options...
hackformore Posted April 5, 2015 Share Posted April 5, 2015 Sorry i didnt patch my dsdt myself.. you have custom applebatterykext? At last it work without custom patch, i just use https://github.com/RehabMan/OS-X-ACPI-Battery-Driver driver and it work. But require full DSDT and SSDT. It 's 10.10.2 and clover Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2125432 Share on other sites More sharing options...
Leumas1311 Posted May 3, 2015 Share Posted May 3, 2015 I have this sometimes while adding uefi too, it resolves when i disconnect the hdds, so bios cannot read bootloader anymore, then boot. Then shutdown, connect the windows hdd, then try again So first of all I want to thank you for all the help you have provided with this thread and earlier with my problems. Asus support is messed up! I just yesterday got my new bios chip, such a hassle.... So I installed it, and my computer still does the same thing, it will not boot into the bios or the operating system... I am seriously starting to freak out now because I can find nothing on the net to help me fix this problem! So I'd really appreciate it if you guys could give me some input, just let me know what specs or info you need, or I could just do a detailed post of everything that's happened. Thanks so much, Leumas Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2132949 Share on other sites More sharing options...
IIIdefconIII Posted May 4, 2015 Author Share Posted May 4, 2015 So first of all I want to thank you for all the help you have provided with this thread and earlier with my problems. Asus support is messed up! I just yesterday got my new bios chip, such a hassle.... So I installed it, and my computer still does the same thing, it will not boot into the bios or the operating system... I am seriously starting to freak out now because I can find nothing on the net to help me fix this problem! So I'd really appreciate it if you guys could give me some input, just let me know what specs or info you need, or I could just do a detailed post of everything that's happened. Thanks so much, Leumas Strange srry cant help you further try make a youtube video instead and post it. Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2133059 Share on other sites More sharing options...
pippoaacc Posted May 28, 2015 Share Posted May 28, 2015 Hi. I'm looking forward to building a mobile music hackintosh workstation based on 10.8 / 10.9. Does anyone know if this guide can be applied to the newer gt60 2qd dominator with nvidia 9xx, or can anyone address me to such a guide? Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2139619 Share on other sites More sharing options...
wolfJflywheel Posted June 28, 2015 Share Posted June 28, 2015 Hey IIIdefconIII, Thanks for the excellent and informative guide and for sharing your files. I've been lurking the forums for a long time, but this is the first Intel PC I've owned for a long while, so this is my first forray into the wild world of hackintoshes. Unfortunately my hardware doesn't match yours. I'm on a GT72, rather than a GT70, but I was hoping you might be able to point me in the right direction for solving the error I'm getting. Here's the error I get every time I get past the clover boot-loader: Any thoughts? I really appreciate any feedback. Thanks. Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2149023 Share on other sites More sharing options...
IIIdefconIII Posted June 28, 2015 Author Share Posted June 28, 2015 Hey IIIdefconIII, Thanks for the excellent and informative guide and for sharing your files. I've been lurking the forums for a long time, but this is the first Intel PC I've owned for a long while, so this is my first forray into the wild world of hackintoshes. Unfortunately my hardware doesn't match yours. I'm on a GT72, rather than a GT70, but I was hoping you might be able to point me in the right direction for solving the error I'm getting. Here's the error I get every time I get past the clover boot-loader: Any thoughts? I really appreciate any feedback. Thanks. I would try to read the Clover guid, it has proberly something to do with the UEFI64DRIVERS folder from clover. Try this from my original post: Remove *.efi files from CLOVER/driver64EFUI and put you're OWN *.efi files here; 1. [HFSPlus.efi], [OsxFatBinaryDrv-64.efi] if this does not work if were going to install later, then 2. [HFSPlus.efi], [OsxFatBinaryDrv-64.efi], [OsxLowMemFixDrv-64.efi] and then if this does not work then 3. [HFSPlus.efi], [OsxFatBinaryDrv-64.efi], [OsxAptioFixDrv-64.efi] (with slide=0 in boot args in config.plist) and if even this does not work, then try: 4. [HFSPlus.efi], [OsxFatBinaryDrv-64.efi], [OsxAptioFixDrv-64.efi] (with slide=0 in boot args in config.plist), [EmuVariableUefi-64.efi] Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2149083 Share on other sites More sharing options...
VihilarianOC Posted October 2, 2015 Share Posted October 2, 2015 Alright- WHAT?? I am experiencing the same issue as someone on page #3, where Kali does not show up in Clover. I installed GRUB to a USB to boot off of for now, but Clover refuses to boot Kali- and note I do not linux files in my EFI directory- though I tried copying grubx64 and booting off that (Clover would only detect it as "Linux" not "Linux Kernel All" I saw you provided the user with a config file, I was going to inspect what you set in the GUI part of clover configurator, but to my surprise its a game config file- I expected it and confirmed this. What?? What do I need to do to get Kali working? I installed it fine, but I can not find the appropriate files to boot from - or how to make Clover handle them properly. Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2172237 Share on other sites More sharing options...
IIIdefconIII Posted October 3, 2015 Author Share Posted October 3, 2015 Alright- WHAT?? I am experiencing the same issue as someone on page #3, where Kali does not show up in Clover. I installed GRUB to a USB to boot off of for now, but Clover refuses to boot Kali- and note I do not linux files in my EFI directory- though I tried copying grubx64 and booting off that (Clover would only detect it as "Linux" not "Linux Kernel All" I saw you provided the user with a config file, I was going to inspect what you set in the GUI part of clover configurator, but to my surprise its a game config file- I expected it and confirmed this. What?? What do I need to do to get Kali working? I installed it fine, but I can not find the appropriate files to boot from - or how to make Clover handle them properly. which file are you reffering to exactly... Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2172568 Share on other sites More sharing options...
VihilarianOC Posted October 4, 2015 Share Posted October 4, 2015 I made very amateur mistake! I was booting KALI installer as legacy! The initial guide was not clear that it is necessary to extract the EFI folder from Kali's /boot/efi.img file and place it in the root of the USB. After this all is well, except that Clover needs to have grubx64.efi set to Linux, not LinuxKernel as the guide shows. Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2173013 Share on other sites More sharing options...
slayer2333 Posted November 18, 2015 Share Posted November 18, 2015 Hey buddy, were you able to get all USB2/USB3 ports working on El Capitan ? If so what changes did you make to the DSDT/Clover config.plist ? On my build (GT70-2OD) i get all USB3 Working with my previous files from Mavericks/Yosemite, but nothing working on USB2. Thanks. Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2189550 Share on other sites More sharing options...
IIIdefconIII Posted November 25, 2015 Author Share Posted November 25, 2015 Hey buddy, were you able to get all USB2/USB3 ports working on El Capitan ? If so what changes did you make to the DSDT/Clover config.plist ? On my build (GT70-2OD) i get all USB3 Working with my previous files from Mavericks/Yosemite, but nothing working on USB2. Thanks. I stopped this project, to much everytime, to update patch bladibladiblaa, now i have windows + os x in vmware + linux in vmware much better to maintenance Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2191722 Share on other sites More sharing options...
ThunderBolt_Mac Posted April 28, 2016 Share Posted April 28, 2016 I installed every thing but Kali linux doesn't show in clover boot menu. Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2235072 Share on other sites More sharing options...
IIIdefconIII Posted April 28, 2016 Author Share Posted April 28, 2016 I installed every thing but Kali linux doesn't show in clover boot menu. How did you install it which partition? also uplload youre info.plist so i can take a look, n some cases we need to add the path manually Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2235085 Share on other sites More sharing options...
ThunderBolt_Mac Posted April 29, 2016 Share Posted April 29, 2016 How did you install it which partition? also uplload youre info.plist so i can take a look, n some cases we need to add the path manually I installed it in separate partition also ubuntu is installed ubuntu is listed in clover boot options but kali linux is not listed i can access it only from bios. Info.plist.zip Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2235115 Share on other sites More sharing options...
IIIdefconIII Posted April 29, 2016 Author Share Posted April 29, 2016 I installed it in separate partition also ubuntu is installed ubuntu is listed in clover boot options but kali linux is not listed i can access it only from bios. Info.plist.zip Did you create the installer like my guide? Maybe you installed it in non-uefi mode, mbr.. instead. i will take a look at youre info.plist now please upload CLOVER/config.plist instead of info.plist (my bad) Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2235119 Share on other sites More sharing options...
ThunderBolt_Mac Posted April 29, 2016 Share Posted April 29, 2016 Did you create the installer like my guide? Maybe you installed it in non-uefi mode, mbr.. instead. i will take a look at youre info.plist now please upload CLOVER/config.plist instead of info.plist (my bad) It is installed in uefi mode. I have used the kexts suitable for my laptop. config.plist.zip Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2235122 Share on other sites More sharing options...
IIIdefconIII Posted April 29, 2016 Author Share Posted April 29, 2016 It is installed in uefi mode. I have used the kexts suitable for my laptop. config.plist.zip double check youre entries: take myne as example: http://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page-1?do=findComment&comment=1968832 post #8 Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2235125 Share on other sites More sharing options...
ThunderBolt_Mac Posted April 29, 2016 Share Posted April 29, 2016 (edited) double check youre entries: take myne as example: http://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page-1?do=findComment&comment=1968832 post #8 I didn't install windows, I uninstalled ubuntu but that didn't work too. Edit: I installed VBoxExt4-64.efi driver and it worked Edited April 29, 2016 by ThunderBolt_Mac Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2235131 Share on other sites More sharing options...
IIIdefconIII Posted May 1, 2016 Author Share Posted May 1, 2016 I didn't install windows, I uninstalled ubuntu but that didn't work too. Edit: I installed VBoxExt4-64.efi driver and it worked Great to hear you got it working! Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2235485 Share on other sites More sharing options...
davidosullivan Posted May 9, 2016 Share Posted May 9, 2016 I set my Hackintosh up following these instructions sometime ago and I was just wondering if anyone has done an Upgrade to Windows10 from an earlier version? If I let Windows update itself from 7 to 10 I dont suppose there is any chance the installer is clever enough for that to 'just work' with all this funky UEFI stuff is there? Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2236949 Share on other sites More sharing options...
IIIdefconIII Posted May 10, 2016 Author Share Posted May 10, 2016 I set my Hackintosh up following these instructions sometime ago and I was just wondering if anyone has done an Upgrade to Windows10 from an earlier version? If I let Windows update itself from 7 to 10 I dont suppose there is any chance the installer is clever enough for that to 'just work' with all this funky UEFI stuff is there? Nope i didnt, but i do think windows will create its own partition correctly. But maybe you have to boot from clover usb again to add it as boot option. Make a image first with macrium reflect. So if anything goes wrong, you are able to revert it back easy. Good luck and let us know youre findings so we can write an post how to update and add it to Original Post Link to comment https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/page/6/#findComment-2237071 Share on other sites More sharing options...
Recommended Posts