TimeWalker75a Posted October 11, 2014 Author Share Posted October 11, 2014 Sorry, but .. why the f*ck would you want to enable something that was forcefully disabled (with SSDT-4)? No CUDA will run.. ever, the hardware renderer doesn't work and will never will,NVIDIA you are seeing is just a cosmetic gimmick string made up by Clover's injection. Link to comment Share on other sites More sharing options...
Nick White Posted October 11, 2014 Share Posted October 11, 2014 Ok, i understand. Thanks for clarifying on that. Link to comment Share on other sites More sharing options...
DMP87 Posted October 11, 2014 Share Posted October 11, 2014 @ DMP87 - can you attach your EFI folder? You would need to mount the EFI partition first. You can do this by using the Mounter tool which is under Apps in the package. Edit: Do you have something connected to either on the HDMI or DP port? The only thing i have connected is the ethernet and power. Does it matter that i bought the Broadcom bcm943225HMB and not the AW NB290 bcm943225HMB? figured they were both the same since they had the same part number and it was stated as such in this thread. attached is EFI folder. https://www.dropbox.com/s/c7n37kydad2i91p/EFI.zip?dl=0 thanks for the reply. Link to comment Share on other sites More sharing options...
TimeWalker75a Posted October 11, 2014 Author Share Posted October 11, 2014 Hmm .. maybe having Intel-only card is the problem. Try setting DualLink to 0 first, if that doesn't help then let me fetch you an alternative table to try with your machine instead of tables + clover injection used for AMD SG and NV Optimus models. SSDT-2.aml.zip Link to comment Share on other sites More sharing options...
webcivilian Posted October 11, 2014 Share Posted October 11, 2014 @DMP87 - Looks like you have both the intel wifi card and BCM card installed. I would suggest you to only put the BCM card inplace of the intel wifi card. If you want both then it would be better if you put the BCM card in the Wifi slot and not the WWAN slot. Oct 9 19:07:08 Dominiques-MacBook-Pro kernel[0] <Debug>: ARPT: 109.752569: Vendor ID 0x8086 is not valid Also, the freezes are occurring due to graphics not properly configured. Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: **** Debug info for *possible* hang in MAIN graphics engine **** Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: ring head = 0x0200c550, wrap count = 16 Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: ring tail = 0x0000c950 Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: ring control = 0x0000f801 enabled, auto report disabled, waiting, semaphore not waiting, length = 0x010 4KB pages Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: timestamps = 0x35d2 Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: Semaphore register values: Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: VRSYNC: (0x12044) = 0x35d2 Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: BRSYNC: (0x22040) = 0x0 Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: RVSYNC: (0x 2040) = 0x0 Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: BVSYNC: (0x22044) = 0x0 Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: RBSYNC: (0x 2044) = 0x0 Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: VBSYNC: (0x12040) = 0x0 Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: Looks like MAIN ring is stuck waiting on an event As TimeWalker suggested, try setting duallink to 0. If that does not work then you can try setting the product name to Macbook 8,1 instead of 8,3. First try replacing your config.plist with the attached duallink. If that doesn't work try replace it with the duallink and macbook. Put it under EFI > Clover config duallink 0.plist.zip config duallink and macbook81.plist.zip Link to comment Share on other sites More sharing options...
DMP87 Posted October 11, 2014 Share Posted October 11, 2014 Hmm .. maybe having Intel-only card is the problem. Try setting DualLink to 0 first, if that doesn't help then let me fetch you an alternative table to try with your machine instead of tables + clover injection used for AMD SG and NV Optimus models. SSDT-2.aml.zip @DMP87 - Looks like you have both the intel wifi card and BCM card installed. I would suggest you to only put the BCM card inplace of the intel wifi card. If you want both then it would be better if you put the BCM card in the Wifi slot and not the WWAN slot. Oct 9 19:07:08 Dominiques-MacBook-Pro kernel[0] <Debug>: ARPT: 109.752569: Vendor ID 0x8086 is not valid Also, the freezes are occurring due to graphics not properly configured. Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: **** Debug info for *possible* hang in MAIN graphics engine **** Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: ring head = 0x0200c550, wrap count = 16 Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: ring tail = 0x0000c950 Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: ring control = 0x0000f801 enabled, auto report disabled, waiting, semaphore not waiting, length = 0x010 4KB pages Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: timestamps = 0x35d2 Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: Semaphore register values: Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: VRSYNC: (0x12044) = 0x35d2 Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: BRSYNC: (0x22040) = 0x0 Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: RVSYNC: (0x 2040) = 0x0 Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: BVSYNC: (0x22044) = 0x0 Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: RBSYNC: (0x 2044) = 0x0 Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: VBSYNC: (0x12040) = 0x0 Oct 9 19:13:33 Dominiques-MacBook-Pro kernel[0] <Debug>: Looks like MAIN ring is stuck waiting on an event As TimeWalker suggested, try setting duallink to 0. If that does not work then you can try setting the product name to Macbook 8,1 instead of 8,3. First try replacing your config.plist with the attached duallink. If that doesn't work try replace it with the duallink and macbook. Put it under EFI > Clover Are you saying that there is something else i need to physically uninstall? because I thought what i took out was the old wifi card and installed a new one. Secondly, i have upgraded to Yosemite 10.10 beta 4 and funny enough my wifi is working, profile is correct, now i am trying to get bluetooth to work. smh. Link to comment Share on other sites More sharing options...
webcivilian Posted October 11, 2014 Share Posted October 11, 2014 So no more freezing and other issues? Were you using a ditro like Nilesh or something? It just could be bad install which was fixed once you upgraded to Yosemite. Link to comment Share on other sites More sharing options...
DMP87 Posted October 11, 2014 Share Posted October 11, 2014 Thanks for all the help webcivilian and time walker. Webcivillian let me know bluetooth pairing (I'm assuming between i devices) is currently broken in the current PB. but i can pair with non i devices (just confirmed) Link to comment Share on other sites More sharing options...
webcivilian Posted October 14, 2014 Share Posted October 14, 2014 Clean installed Yosemite using AptioFix2 driver. With this driver, Yosemite installer creates a boot entry in BIOS called Mac OS X which does not work as it does not point to Clover. This creates NVRAM issues and slows down the system. It's better to use emuVariable with AptioFix with the installer. I'm able to use my bluetooth devices like the Magic Trackpad with Yosemite PB 6. I'm using AzureWave CE123H which is Broadcom BCM4352 + BCM20702BT. Link to comment Share on other sites More sharing options...
TimeWalker75a Posted October 14, 2014 Author Share Posted October 14, 2014 Well, the usb files have been revised to include emuvar, so there shouldn't be an issue. I always assumed it was stupid gigabyte bios adding a link to boot.efi, turns out it's boot.efi itself. Link to comment Share on other sites More sharing options...
anonymousnbs Posted October 16, 2014 Share Posted October 16, 2014 hi timewalker i have problems with HDMI i am connect HDMI to laptop with tv samsung but not working Mac OSX 10.10 Pb 6 Link to comment Share on other sites More sharing options...
TimeWalker75a Posted October 16, 2014 Author Share Posted October 16, 2014 I can't recommend you anything because you haven't followed my guide. Mine is working flawlessly, including sound pass-through.. http://puu.sh/cen4x/03a474945e.png What can I say though is - ensure to use quality HDMI cables. I have a cable ordered from China that doesn't work with my receiver, when connected directly between TV & laptop it doesn't transmit audio signal (even though laptop sees the HDMI TV as audio-capable). The cable works ok with a PS3 though .. go figure. Link to comment Share on other sites More sharing options...
webcivilian Posted October 18, 2014 Share Posted October 18, 2014 Anyone got Handoff working? Link to comment Share on other sites More sharing options...
TimeWalker75a Posted October 18, 2014 Author Share Posted October 18, 2014 Only works with BCM94360CD and 94331CD Works with my frankenstein adapter Link to comment Share on other sites More sharing options...
webcivilian Posted October 18, 2014 Share Posted October 18, 2014 Did you had to patch any kext to get it enabled? or changes to the SMBIOS? Does it work out of the box? What adapter board is that? I have WWAN full height port. Can I use the card with the adapter? Link to comment Share on other sites More sharing options...
TimeWalker75a Posted October 18, 2014 Author Share Posted October 18, 2014 I had to, yes. Just Mac model... I't a custom made adapter (obviously lol) to retrofit the 18-pin card into half size PCI-E slot of my Vostro as I don't have a WWAN slot soldered in my unit and I can't detach the daugtherboard to replace it. Link to comment Share on other sites More sharing options...
jkbuha Posted October 19, 2014 Share Posted October 19, 2014 Ah I recognise a certain familiar SSD caddy there... On other news, easy seamless upgrade to 10.10 Release from 10.9.5, only side effect is that iMessage/Facetime now does not work with Chameleon/Clover, which leaves me no option but to call Apple Support. Not a problem tho... One strange anomaly - when trying to update apps from Appstore I get a strange NSURLErrorDomain error -1012. Anyone else seeing this? Link to comment Share on other sites More sharing options...
webcivilian Posted October 19, 2014 Share Posted October 19, 2014 My problem with iMessage/Facetime started after I updated to 10.9.5. During the sametime, I replaced my wifi card and cleared NVRAM from the BIOS. It could be all of these or none of them. I tried with a serial that I had used before that was working with iMessage but it did not help. Eventually I got a proper serial number for my mac model and called in. Now it works. I changed the serial number to see if it would stop and it did. I'm not experiencing the App store error but looks like it's either related to DNS lookup or antivirus blocking some requests. Link to comment Share on other sites More sharing options...
DavidRocha Posted October 19, 2014 Share Posted October 19, 2014 I am experiencing several problems with Yosemite. These various messages related to the bluetooth / wifi appears, but starts normally, just without the audio getting. What was happening? Can anyone help? I am not able to access the imessage. I have already put the data in config.plist and nothing. message.tiff nvram.tiff Link to comment Share on other sites More sharing options...
webcivilian Posted October 20, 2014 Share Posted October 20, 2014 What wifi card are you using? Do you more that 1 installed? For the last few weeks Apple has tightened iMessage security. If you have a non valid serial. It will probably not work any more. Only way to get it work is to call in. Link to comment Share on other sites More sharing options...
TimeWalker75a Posted October 20, 2014 Author Share Posted October 20, 2014 Serial or if minor importance, uuid and MLB are. Link to comment Share on other sites More sharing options...
jkbuha Posted October 20, 2014 Share Posted October 20, 2014 I have a BCM43225 card which has been correctly patched to show up as an Airport card. Don't think the problem is with en0. ROM string is set to match the MAC address, as is well documented elsewhere. I have a user-generated serial which worked/works well on Chameleon. I suspect the MLB and/or UUID are more to blame, as per TW's suggestion. Interestingly though when I boot Yosemite under Chameleon, with iMessage_debug both MLB and ROM show up as the following: 2014-10-20 11:31:00.564 imessage_debug[8096:33757] 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:ROM: failed 2014-10-20 11:31:00.565 imessage_debug[8096:33757] 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:MLB: failed And FaceTime still works Because Clover does a better job and forces correct setting for ROM/MLB, it does not match up with the previous (unset) Chameleon settings and FT/IM stops working. Unless I can force Clover to unset any values I will need to call Apple with new UUID/MLB/ROM values to re-configure my account. Link to comment Share on other sites More sharing options...
TimeWalker75a Posted October 20, 2014 Author Share Posted October 20, 2014 Nvram module doesn't work on chameleon anymore, so there's that... Link to comment Share on other sites More sharing options...
s3n4te Posted October 21, 2014 Share Posted October 21, 2014 I followed the guide on the first page to install Yosemite Final on my Dell n4110, but the system freezes while booting the install usb. Has anyone experienced this? Link to comment Share on other sites More sharing options...
DavidRocha Posted October 21, 2014 Share Posted October 21, 2014 Chooses to inject kext option at boot time with the clover! Link to comment Share on other sites More sharing options...
Recommended Posts