Chetzar Posted June 13, 2014 Share Posted June 13, 2014 Thanks toleda, I rebuilt everything, seems to work fine now! Link to comment Share on other sites More sharing options...
toleda Posted June 20, 2014 Author Share Posted June 20, 2014 anyone help me to find out the right pin configuration to identify the input device and output device Off topic. Link to comment Share on other sites More sharing options...
Rocky12 Posted June 20, 2014 Share Posted June 20, 2014 Thanks for ur help Link to comment Share on other sites More sharing options...
Buckeyes1995 Posted June 21, 2014 Share Posted June 21, 2014 I posted this over in the Yosemite area, but it's actually a Mavericks problem. When I patch AppleHDA it works great.. *IF* I boot with 'ignore caches'. Otherwise, it does not. I've added the AppleHDA kexts to the AppleKextsExclude.kext but still no luck. Anyone have any suggestions. Minor issue, but driving me nuts.T Thanks. Link to comment Share on other sites More sharing options...
toleda Posted June 22, 2014 Author Share Posted June 22, 2014 Anyone have any suggestions. Did you rebuilt cache before restarting? Use terminal commands or dpcimanager Link to comment Share on other sites More sharing options...
Buckeyes1995 Posted June 22, 2014 Share Posted June 22, 2014 Did you rebuilt cache before restarting? Use terminal commands or dpcimanager Yessir, I rebuilt with kextcache -system-prelinked-kernel kextcasche -system-caches Same result. I have not looked at dpcimanager. Link to comment Share on other sites More sharing options...
dblackeby Posted June 22, 2014 Share Posted June 22, 2014 Hi I'm having trouble getting audio to work using the Clover method, I can see the Intel High Definition Audio in the System Information, with all the relevant ports, however under Settings/Sound there are no output devices listed. Configuration as follows:- 1. OSX version/motherboard model/Bios version/Processor/Graphics OSX 10.9.3, Gigabyte GA-87X-HD3, Intel 3.4Ghz Core I5, ATI Radeon 4890 2. Procedure Used Clover Patched Realtek ALC Installation 3. IOReg Attached IOReg.zip 4 Chameleon Not Applicable 5 Clover Attached Clover.zip Any help you can provide to get this working will be much appreciated. IOReg.zip Clover.zip Link to comment Share on other sites More sharing options...
toleda Posted June 22, 2014 Author Share Posted June 22, 2014 Any help you can provide to get this working will be much appreciated. Attach the installed AppleHDA.kext. Link to comment Share on other sites More sharing options...
dblackeby Posted June 23, 2014 Share Posted June 23, 2014 Attach the installed AppleHDA.kext. Attached AppleHDA.kext.zip AppleHDA.kext.zip Link to comment Share on other sites More sharing options...
toleda Posted June 23, 2014 Author Share Posted June 23, 2014 Attached AppleHDA.kext.zip Ran the wrong script. Fix: Install the native AppleHDA.kext (2.9 MB), Backup is Desktop/audio_ALC892/AppleHDA.kext-orig.kext Run Downloads/audio_ALC892-master/cloverALC/audio_cloverALC892-90_patch.command Hint: delete all audio_alc892-9x_patch.commands Link to comment Share on other sites More sharing options...
dblackeby Posted June 23, 2014 Share Posted June 23, 2014 Ran the wrong script. Fix: Install the native AppleHDA.kext (2.9 MB), Backup is Desktop/audio_ALC892/AppleHDA.kext-orig.kext Run Downloads/audio_ALC892-master/cloverALC/audio_cloverALC892-90_patch.command Hint: delete all audio_alc892-9x_patch.commands Many thanks that fixed it, I think I got confused by reading the requirements section and seeing that alc892-93 being listed as for Mavericks 10.9.3/AppleHDA.kext_v2.6.1 and so ran that script first, before the script in the CloverALC directory. Link to comment Share on other sites More sharing options...
fakea648 Posted June 29, 2014 Share Posted June 29, 2014 Does this work for ALC 889A? Link to comment Share on other sites More sharing options...
toleda Posted June 29, 2014 Author Share Posted June 29, 2014 Does this work for ALC 889A? Yes, 889a is the Gigabyte marketing name for the Realtek ALC885; use ALC885. Link to comment Share on other sites More sharing options...
Vahids Posted June 29, 2014 Share Posted June 29, 2014 what about ALC0269 ? Didn't support ? Acer E1-571G and in SystemInfo app show me It's OK Link to comment Share on other sites More sharing options...
toleda Posted June 29, 2014 Author Share Posted June 29, 2014 what about ALC0269 ? Not supported on this thread. Link to comment Share on other sites More sharing options...
VirusX Posted July 1, 2014 Share Posted July 1, 2014 Hi toleda, do you already have an update for 10.9.4? As far as I can see, AppleHDA got updated to version 2.6.3. Thank you very much in advance! Link to comment Share on other sites More sharing options...
toleda Posted July 2, 2014 Author Share Posted July 2, 2014 do you already have an update for 10.9.4? As far as I can see, AppleHDA got updated to version 2.6.3. Testing, update soon. 5 Link to comment Share on other sites More sharing options...
The Real Deal Posted July 5, 2014 Share Posted July 5, 2014 Hi, We can run : audio_cloverALC1150-90_patch on 10.9.3 AppleHDA ? It's not specified. EDIT : Answer = no. My setup : Clover 2716 - 10.9.4 + AppleHDA from 10.9.0 - Asus Maximus VII Gene -> config.plist edited as it should be -> RealtekALC.kext where it should be -> patched AppleHDA as it should be And..... it works Thank you very much Toleda. Subject to random KP at boot unfortunately. AppleHDA 2.5.2 Dependencies bla. Link to comment Share on other sites More sharing options...
toleda Posted July 6, 2014 Author Share Posted July 6, 2014 Subject to random KP at boot unfortunately. AppleHDA 2.5.2 Dependencies bla. toleda/audio_CloverHDMI/README/6. Mavericks Version/3. 10.9 (-90) works in 10.9 or newer. audio_cloverALC1150-90_patch works on all versions of Mavericks. 10.9.4/AppleHDA.kext should be v2.6.1, not v2.5.2 Fix: Install the native AppleHDA_v2.6.1 Run audio_cloverALC1150-90_patch.command Wait for kernel cache rebuild Reastart Link to comment Share on other sites More sharing options...
arek1912 Posted July 6, 2014 Share Posted July 6, 2014 Hi, i have trouble using the clover method. The ports are shown but i don't get output at the green port. When i connect speaker to the front port the "IntSpeakers" switches to "Headphones" and i get an output. But the green port doesn't work. My System: 10.9.4/GA-Z97X-UD5H/F7/I7-4770k/GTX770I hope i attached everything you need and you solve this problem. Greetings ioreg.zip config.plist.zip AppleHDA.kext.zip Link to comment Share on other sites More sharing options...
toleda Posted July 7, 2014 Author Share Posted July 7, 2014 But the green port doesn't work. Known 9 Series/1150 problem, no fix available at this time. If convenient and willing, try the following experiment: 1. Backup EFI/Clover/kexts/10.9/realtekALC.kext 2. Remove EFI/Clover/kexts/10.9/realtekALC.kext 3. Restart 4. Verify motherboard green audio (note: use 1st Line Out, Internal Speakers will not show and Headphones not available) 5. Make a new IOReg 6. Restore EFI/Clover/kexts/10.9/realtekALC.kext 7. Restart Reply with motherboard green sound Y/N and IOReg. Link to comment Share on other sites More sharing options...
arek1912 Posted July 7, 2014 Share Posted July 7, 2014 Known 9 Series/1150 problem, no fix available at this time. If convenient and willing, try the following experiment: 1. Backup EFI/Clover/kexts/10.9/realtekALC.kext 2. Remove EFI/Clover/kexts/10.9/realtekALC.kext 3. Restart 4. Verify motherboard green audio (note: use 1st Line Out, Internal Speakers will not show and Headphones not available) 5. Make a new IOReg 6. Restore EFI/Clover/kexts/10.9/realtekALC.kext 7. Restart Reply with motherboard green sound Y/N and IOReg. Hi, thanks for the answer. Well, the green port still doesn't work but i could hear some "noise" when moving files to the trash and switching the sound effects in the systemconfig. I attached the IOReg without installed realtekALC.kext. I also attached a AppleHDA.kext from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] which works fine for me when using chameleon with <key>HDAEnabler</key> <string>Yes</string> <key>HDEFLayoutID</key> <string>01000000</string> in the org.chameleon.Boot.plist. But i was not able to inject this kext using clover. Maybe it can help you to solve my problem? AppleHDA.kext.fromMultibeast.zip ioreg2.zip Link to comment Share on other sites More sharing options...
toleda Posted July 7, 2014 Author Share Posted July 7, 2014 Hi, thanks for the answer. Well, the green port still doesn't work but i could hear some "noise" when moving files to the trash and switching the sound effects in the systemconfig. I attached the IOReg without installed realtekALC.kext. I also attached a AppleHDA.kext from ##### which works fine for me when using chameleon with <key>HDAEnabler</key> <string>Yes</string> <key>HDEFLayoutID</key> <string>01000000</string> in the org.chameleon.Boot.plist. But i was not able to inject this kext using clover. Maybe it can help you to solve my problem? Thanks. confirm green port works with attached AppleHDA.kext in Chameleon. For Clover, remove: 1. config.plist/KernelAndKextPatches/KextsToPatch/Item 0, Item 1 and Item 2 2. EFI/Clover/kexts/10.9/realtekALC.kext. config.plist/Devices/Audio/Inject/1 is correct. 1 Link to comment Share on other sites More sharing options...
Xavorithre Posted July 12, 2014 Share Posted July 12, 2014 Somehow after updating from iTunes 11.2.2 to 11.3, the AppleHDAController (temporary) patch in Clover caused a KP. I removed it from my config.plist and now I'm booting fine. Even though I highly doubt an iTunes update can mess up the AppleHDAController patch, I'm pretty sure that's the only thing I updated. This post is just to inform to anyone that a KP after updating iTunes might be the cause of AppleHDAController. Here are some specs:10.9.4 with Clover and home made Fusion DriveALC892GA-B75N motherboard with newest F5 BIOSIOReg and config.plist found in the attachments. IOReg.zip config.plist.zip Link to comment Share on other sites More sharing options...
Ingwar77 Posted July 12, 2014 Share Posted July 12, 2014 Testing, update soon. ALC885 patch for 10.9.4. needs badly, HELP me PLZ Link to comment Share on other sites More sharing options...
Recommended Posts