mnfesq Posted September 8, 2017 Share Posted September 8, 2017 Just recently, both wifi and BT don't reload after wake from sleep. Using FakePCIID.kext with FakePCIID_Broadcom_WiFi.kext for wifi and BrcmFirmwareData.kext with BrcmPatchRAM2.kext for BT. Running Clover version 4200 but it started when I was running 4189. No recent changes to my DSDT. Any ideas? Link to comment Share on other sites More sharing options...
lilins Posted September 9, 2017 Share Posted September 9, 2017 still not working on the 1070 hackintosh. so there may be another issue. i have a few days i won't be able to touch it but i come back with tests and result i soon as i can do this Link to comment Share on other sites More sharing options...
toleda Posted September 10, 2017 Author Share Posted September 10, 2017 BrcmFirmwareData.kext with BrcmPatchRAM2.kext for BT. Not correct, see Post #1 BCM BT (10.12 - all versions, 10.11- all versions) BT injection Link to comment Share on other sites More sharing options...
mnfesq Posted September 10, 2017 Share Posted September 10, 2017 Not correct, see Post #1 BCM BT (10.12 - all versions, 10.11- all versions) BT injection I fixed my problem by booting into Windows. After that, wifi and BT reloaded properly after wake from sleep in macOS. I will try out the BT injector. The Github explanation makes the injector sound like the least-preferred option. The method I used was a more-preferred option. Still, it's an opportunity to try out a new method. Thanks for pointing it out. Link to comment Share on other sites More sharing options...
psm Posted September 24, 2017 Share Posted September 24, 2017 Hi ! So I'm actually the guy behind the Zotac en1070K (Kaby Lake) with the BT issue and the DW1830 card. I'm back from home now so I'm going to look at some things around this. Thanks @lilins and @Hervé for the help so far. I'll let you know how that goes. Link to comment Share on other sites More sharing options...
lilins Posted September 26, 2017 Share Posted September 26, 2017 at least on the zotac en1060 version (skylake) everything is working now. so we don't understand why his 1070k (kabylake) shouldn't have some shortcomings: the BT from 1830 not working - (this is for this thread) the mac os reboots when idling. not when used - (this for other thread) we created the clover profile based on mine, we only removed special dsdt for HDMI/DP audio and changed the smbios to imac with kabylake (i based mine on imac 17.1) i'm eager to make cross test with him, because normally, except the processor difference, the mlb is same with same components, a slight difference in efi versions maybe. Link to comment Share on other sites More sharing options...
lilins Posted October 1, 2017 Share Posted October 1, 2017 So we tried again on the en1070k from the en1060 setup changing smios to imac 18,2 -BrcmPatchRAM2.kext and BrcmFirmwareRepo.kext from https://github.com/syscl/XPS9350-macOS in Clover/kext/others folder: Not working -BrcmPatchRAM2.kext and BrcmFirmwareRepo.kext in /Library/Extentions folder: working -BrcmPatchRAM2.kext in CLOVER and BrcmFirmwareRepo.kext in /Library/Extentions folder: working inverse not working so it seems that on the en1070k that the BrcmFirmwareRepo.kext can't work when launched from CLOVER. Has anyone seen this before, is there a workaround? i'd prefer a clean clover only kext folder. Thanks for your help Link to comment Share on other sites More sharing options...
toleda Posted October 1, 2017 Author Share Posted October 1, 2017 -BrcmPatchRAM2.kext and BrcmFirmwareRepo.kext BrcmFirmwareRepo.kext can only be installed S/L/E. BrcmFirmwareData.kext can installed in EFI See Post #1/BCM BT Use the developer link for the correct, current files. Link to comment Share on other sites More sharing options...
Cloudane Posted October 1, 2017 Share Posted October 1, 2017 Is 10.13 unsupported at the moment? I've put BrcmPatchRAM2.kext and BrcmFirmwareData.kext into clover/kexts and the result is boot-up takes a lot longer (like 5 minutes) and keyboard and mouse do not respond (but it does communicate over the network) Edit: Got it I think by using the "injection" method. As mfnesq says the mixed messages are very confusing! Really appreciate the work it's just that the communication being so curt can be a little tricky to follow. I had to download one of the binaries from 2015 to get my hands on the elusive BrcmBluetoothInjector.kext and combined this with a current BrcmNonPatchRAM2.kext and BrcmFirmwareRepo.kext (show contents, find info.plist, change IOProviderClass from disabled_IOResources to IOResources) and bluetooth has now appeared... EDIT 2: My situation is obviously different. I had vt-d enabled in the bios after a reset one time -- disabling this stopped the issue where BrcmPatchRAM2 went into some kind of infinite wait loop. Bluetooth is working for me now and did not need the old injector method. Handoff took some doing but it turned out that the DSDT I created in the 10.10 days was faulty - there was a FakeID for the combo card somehow implemented in there that worked for 10.10 but caused problems in 10.13. Removing it but having FakePCIID and FakePCIID-BroadcomWifi in S/L/E finally gave me Handoff = Yes. Link to comment Share on other sites More sharing options...
gujiangjiang Posted October 8, 2017 Share Posted October 8, 2017 what was BCM943224 HMB? I can only search BCM943224 HMS but no HMB... Where can buy this? Link to comment Share on other sites More sharing options...
toleda Posted October 8, 2017 Author Share Posted October 8, 2017 what was BCM943224 HMB? HMB includes BT, HMS does not. 1 Link to comment Share on other sites More sharing options...
gujiangjiang Posted October 8, 2017 Share Posted October 8, 2017 HMB includes BT, HMS does not.My hp have whitelist so I only can use bcm943224hms now but I want to get Bluetooth so I search it but can’t get any information about HMB. 从我的 iPhone 发送,使用 Tapatalk Link to comment Share on other sites More sharing options...
komolyan3 Posted October 24, 2017 Share Posted October 24, 2017 Hello, I hope it's the right thread for my question. So I have a hp zbook g1 laptop, and I wanna replace intel wifi+bt card, I found this. Did someone know, is it cmpatible with this laptop and high sierra? And if it's possible could you show me a supported wifi+bt card wich no need dsdt patch so natively working for high sierra? Thank you! Link to comment Share on other sites More sharing options...
mnfesq Posted October 24, 2017 Share Posted October 24, 2017 Hello, I hope it's the right thread for my question. So I have a hp zbook g1 laptop, and I wanna replace intel wifi+bt card, I found this. Did someone know, is it cmpatible with this laptop and high sierra? And if it's possible could you show me a supported wifi+bt card wich no need dsdt patch so natively working for high sierra? Thank you! I don't think you will find a wifi/bt chip that works OOB with High Sierra. The one you linked should work but you will need to use RehabMan's Fake PCIID.kext and the Broadcom kext that comes with it. You will also need his BT kexts. All of these kexts can be installed in your EFI partition. RehabMan's repository can be found here: https://bitbucket.org/RehabMan/ 1 Link to comment Share on other sites More sharing options...
komolyan3 Posted October 24, 2017 Share Posted October 24, 2017 Thank you! You'll have to check HP's own documentation (i.e. web site) re: potential whitelisting. Re: compatibility with High Sierra, answer is obviously yes. I have read all documentation, forum (what I found) about it, but I wait someone who tried beacuse I cant found a clear answer. I don't think you will find a wifi/bt chip that works OOB with High Sierra. The one you linked should work but you will need to use RehabMan's Fake PCIID.kext and the Broadcom kext that comes with it. You will also need his BT kexts. All of these kexts can be installed in your EFI partition. RehabMan's repository can be found here: https://bitbucket.org/RehabMan/ Ok, thank you, yeah I think I know how to do it, I just hope in a easyer way Link to comment Share on other sites More sharing options...
foskvs Posted October 24, 2017 Share Posted October 24, 2017 Thank you! I have read all documentation, forum (what I found) about it, but I wait someone who tried beacuse I cant found a clear answer. Ok, thank you, yeah I think I know how to do it, I just hope in a easyer way You won't find any half minipcie wifi+bt that works OOTB on macOS, as Apple uses different chipsets and formats. FakePCIID + BCM BT+Wifi kexts is by far the easiest way to have an airport-like card. Edit: Even BCM94360HMB, that sounds very similar to BCM94360CD (which works OOTB), needs those kexts. Link to comment Share on other sites More sharing options...
komolyan3 Posted October 25, 2017 Share Posted October 25, 2017 @Hervé Right, thank you! Link to comment Share on other sites More sharing options...
Italian Greyhound Posted October 31, 2017 Share Posted October 31, 2017 I am trying to make my Qualcomm Atheros AR5B97 pci-e wifi card operational in my Asus X53E-106V laptop running High Sierra, since a DW1550 was unfortunately not accepted by my laptop or defective. I understand that Toleda's toledaARPT.kext is no longer working since Sierra. I found a modified info.plist (by Aandresortiz) on GitHub that would allow an Atheros 9285 in MacOS Sierra. Differences with info.plist in toledaARPT.kext look not too big. My AR5B97 has a Atheros 9285 chip. So I would like to try Aandreresortiz' info.plist. Can anyone explain or point me to the direction of installing toledaARPT.kext? Well... toledaARPT.kext "only" contains an info.plist, which I replaced with Aandresortiz's info.plist and installed with Kext Wizard. Great work Aandresortiz, it works in High Sierra!!! Link to comment Share on other sites More sharing options...
toleda Posted October 31, 2017 Author Share Posted October 31, 2017 point me to the direction of installing toledaARPT.kext? Install in EFI/CLOVER/kexts/other or your current installed release folder, toledaARPT.kext.zip Reply with Post #1, Problem Reporting files Link to comment Share on other sites More sharing options...
Italian Greyhound Posted November 7, 2017 Share Posted November 7, 2017 Install in EFI/CLOVER/kexts/other or your current installed release folder, toledaARPT.kext.zip Reply with Post #1, Problem Reporting files Sorry for not being clear enough: toledaARPT.kext did not work, but toledaARPTSierra.kext, which I created using aandresortiz's info.plist, did work! AR5B97 is based on AR9287 chip, not AR9285. It should work in High Sierra but it'll need DSDT/Atheros kext patch. See here for details. Try the DSDT patch on its own 1st (simple "compatibility" statement in a DSM method to add to the relevant identified device). Thanks, but my toledaARPTSierra.kext works "OOB". Link to comment Share on other sites More sharing options...
wikedone Posted December 3, 2017 Share Posted December 3, 2017 ok im stuck im gonna pull my hair out, I have Brcmfirmwaredata,kext, brcmfirmwarerepo.kext,brcmpatchram2.kext Fakepciid_broadcom_wifi.kext all in the efi\clover\kexts\other, i have this in kexttopatch Kext: AirPortBrcm4360 Find: 81F952AA00007529 Replace: 81F952AA00006690 I have this in forcekextstoload \System\Library\Extensions\IO80211Family.kext\Contents\PlugIns\AirPortBrcm4360.kext Devices in clove shows 0x43BA14E4 in the wifi box What else am i not doing i have no wifi but i have bluetooth pan in the network window and nothing else can anyone help me i been messing with this all day I uploaded all the file the needed files.zip it has the clover config and dcpi and ioreg needed files.zip Link to comment Share on other sites More sharing options...
wikedone Posted December 3, 2017 Share Posted December 3, 2017 this is the card i bought https://www.amazon.com/gp/product/B01N4EKSVC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 i was pointed toward this thread and this one http://www.insanelymac.com/forum/topic/312759-fix-macos-sierra-dp1-bcm94532z-wifi/ thanks Link to comment Share on other sites More sharing options...
foskvs Posted December 3, 2017 Share Posted December 3, 2017 this is the card i bought https://www.amazon.com/gp/product/B01N4EKSVC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 i was pointed toward this thread and this one http://www.insanelymac.com/forum/topic/312759-fix-macos-sierra-dp1-bcm94532z-wifi/ thanks You just need FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext in EFI. Link to comment Share on other sites More sharing options...
wikedone Posted December 3, 2017 Share Posted December 3, 2017 I have both of those kexts in efi\clover\kexts\other So I don’t need the password patches in clover? Because right now as it stands it’s only working with Bluetooth Link to comment Share on other sites More sharing options...
wikedone Posted December 3, 2017 Share Posted December 3, 2017 Ok every thing is deleted except the Fcvo one the device I.D has been deleted from devices in clover and nothing has changed still WiFi anywhere Link to comment Share on other sites More sharing options...
Recommended Posts