Jump to content

Airport - PCIe Half Mini

toleda

By toleda,
in LAN and Wireless

 Share
826 posts in this topic

Recommended Posts

davidm71
davidm71
Posted
Posted

Not supported. See Post #1 for supported Broadcom device_ids.

OSX/BCM94360CD requires 3 external antennas and a usb2 plug.

The one I ordered from Ebay delivered from asia has four antennas and a usb plug. My current BT adapter is a button usb plug and the range is horrible. This should be an improvement.

Link to comment
Share on other sites
jaymonkey
jaymonkey
Posted
Posted

Hi guys,

 

i Am using AW-CE123H Wifi/BT PCI Express Card in Sony Laptop running El-Cap- 10.11.6 .... using main guide .... 

 

Wifi enabled with FakePCIID and BT enabled with BrcmPatchRAM2.kext, handoff, continuity and 5G patches applied via Clover ...

 

Everything works ok except for one annoying little gremlin that has been bugging me for a while ..

 

I have AC wifi network .... on bootup wifi will connect to 5G at 867Bps ..... however after sleep/wake or wifi toggle on/off 5G will only connect at 300Bps (sill on AC network)

 

The only way to get back to full speed is to reboot ...

 

Its not just my laptop, i have two desktops that also have Aw-CE123H card (same F/W version) and they also behave exactly the same .... my iphone 6S, Sony Xperia Tablet and genuine MAC all connect to AC network with no problems and do not suffer from this issue so i think its not a fault of the router which is Asus RT-AC86U running latest Merlin build ...

 

https://asuswrt.lostrealm.ca/

 

I think it could possibly be an issue with the firmware in the broadcom 4352 chipset ...

 

  Software Versions:

  CoreWLAN: 11.0 (1101.20)

  CoreWLANKit: 11.0 (1101.20)

  Menu Extra: 11.0 (1121.34.2)

  System Information: 12.0 (1100.2)

  IO80211 Family: 11.1 (1110.26)

  Diagnostics: 5.1 (510.88)

  AirPort Utility: 6.3.6 (636.5)

  Interfaces:

en1:

  Card Type: AirPort Extreme  (0x14E4, 0x2123)

  Firmware Version: Broadcom BCM43xx 1.0 (7.21.95.175.1a6)     <<<<-------------- i think this is old

  MAC Address: 40:e2:30:12:5e:b3

  Locale: FCC

  Country Code: US

  Supported PHY Modes: 802.11 a/b/g/n/ac

  Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165

  Wake On Wireless: Supported

  AirDrop: Supported, Channel 149

  Status: Connected

 

Would appreciate if anyone out there using AW-CE123H with same firmware version is also experiencing this issue ???

 

Wake for Network Access is disabled in Energy saver.

 

I did post this issue on the 'other' forum but didn't any further resolving it, so posting here.

 

Does anyone know how to source later FW and update ? .... not sure if its even possible ?

 

Cheers

Jay

 

Update 16-Oct-2016

 

After searching for what seems like forever i've found a solution to this annoying gremlin here ....

 

http://www.insanelymac.com/forum/topic/312759-fix-macos-sierra-dp1-bcm94532z-wifi/page-3?do=findComment&comment=2262994

 

Basically for whatever reason the issue seems to be related to the Local and Country code ... The guide in post #1 recommends setting these to FCC & US to enable 5G

However the above posts suggests setting CC to #a (local Unknown ?) and now my 5G WiFi always connects at 867bps even after sleep & wifi toggle.

 

So Happy .... big thanks to lisai9093 and Ramalama for the solution

 

Wifi Sys info now looks like this ...

 

  Software Versions:

  CoreWLAN: 11.0 (1101.20)

  CoreWLANKit: 11.0 (1101.20)

  Menu Extra: 11.0 (1121.34.2)

  System Information: 12.0 (1100.2)

  IO80211 Family: 11.1 (1110.26)

  Diagnostics: 5.1 (510.88)

  AirPort Utility: 6.3.6 (636.5)

  Interfaces:

en1:

  Card Type: AirPort Extreme  (0x14E4, 0x2123)

  Firmware Version: Broadcom BCM43xx 1.0 (7.21.95.175.1a6)

  MAC Address: 40:e2:30:12:5e:b3

  Locale: Unknown

  Country Code: #a

  Supported PHY Modes: 802.11 a/b/g/n/ac

  Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144, 149, 153, 157, 161, 165

  Wake On Wireless: Supported

  AirDrop: Supported, Channel 149

 

  Status: Connected

 

Cheers

Jay

Link to comment
Share on other sites
  • 2 weeks later...
davidm71
davidm71
Posted
Posted

Hi,

 

Just got a Broadcomm 94360CD card and 10.11.6 recognizes the Bluetooth features but I don't see any indication Wifi is working.

Thought this card works OOB?

 

Thanks.

 

Edit: Got it working five minutes later by seating the card in the first pci-e mini x1 slot. Guess location matters.

Link to comment
Share on other sites
iloveYou
iloveYou
Posted
Posted

Adding this will work again on 10.12.1 if you had it working in 10.12.0

 

Oh, wish to try. Can you share IO80211Family.kext and IO80211FamilyV2 from 10.12.1? I cant full reinstall for now, but already replaced the 10.12.1 versions with the 10.12 versions without saving originals )

Link to comment
Share on other sites
Jake Lo
Jake Lo
Posted
Posted

I had that already for 10.12 GM. For 10.12.1, I need to add those additional 3 patches to work.

Oh, wish to try. Can you share IO80211Family.kext and IO80211FamilyV2 from 10.12.1? I cant full reinstall for now, but already replaced the 10.12.1 versions with the 10.12 versions without saving originals )

IO80211Family.kext and IO80211FamilyV2 from 10.12.1

IO80211Family.zip

  • Like 1
Link to comment
Share on other sites
UltraLaser
UltraLaser
Posted
Posted

I had that already for 10.12 GM. For 10.12.1, I need to add those additional 3 patches to work.

 

IO80211Family.kext and IO80211FamilyV2 from 10.12.1

attachicon.gifIO80211Family.zip

 

I restored the original IO80211Family.kext and applied the 3 patch.. but now i have "No hardware found".

 

So what can I do to get this card to work?

 

Mine is this :

post-1373167-0-98870900-1477644607_thumb.jpg

post-1373167-0-05313900-1477644613_thumb.jpg

Link to comment
Share on other sites
iloveYou
iloveYou
Posted
Posted

attachicon.gifIO80211Family.zip

 

I restored the original IO80211Family.kext and applied the 3 patch.. but now i have "No hardware found".

 

So what can I do to get this card to work?

 

Mine is this :

 

Same card. Here's my config.plist:

			<dict>
				<key>Comment</key>
				<string>AirPortBrcm4360 - PCI Error 2</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				QQ+3zTnBdQw=
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				QQ+3zTnBZpA=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>AirPortBrcm4360 - PCI Error 1</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				QTnEdRs=
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				QTnEZpA=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>10.11-BCM94352-CC=#a-Ramalama</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				QYP8/3QsSA==
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				ZscGI2HrKw==
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>Sierra Boot Logo Fix</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				AQAAdSU=
				</data>
				<key>Name</key>
				<string>IOGraphicsFamily</string>
				<key>Replace</key>
				<data>
				AQAA6yU=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>AirPortBrcm4360 - PCI Error 3</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				g33EBHQG
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				g33EBGaQ
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>10.11-BCM94352-Whitelest-0x4353-MacBoolAir5,2</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				TWFjLUM2RUZBNjM5NjJGQzZFQTA=
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				TWFjLTI3QURCQjdCNENFRThFNjE=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>BCM94352 Airport</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				gflSqgAAdSk=
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				gflSqgAAZpA=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>10.11-BCM94352-Whitelest-0x4331-iMac14,3</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				TWFjLUM2RUZBNjM5NjJGQzZFQTA=
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				TWFjLTI3QURCQjdCNENFRThFNjE=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>10.11-BCM94352-5GHz-US-FCC-dv</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				QYP8/3QsSA==
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				ZscGVVPrKw==
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>10.11-BCM94352-Airport-Extreme</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				axAAAHUN
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				axAAAJCQ
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>10.11-BT4LE-Handoff-Hotspot-lisai9093</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				SIX/dEdIiwc=
				</data>
				<key>Name</key>
				<string>IOBluetoothFamily</string>
				<key>Replace</key>
				<data>
				Qb4PAAAA60Q=
				</data>
			</dict>
Link to comment
Share on other sites
UltraLaser
UltraLaser
Posted
Posted

Same card. Here's my config.plist:

			<dict>
				<key>Comment</key>
				<string>AirPortBrcm4360 - PCI Error 2</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				QQ+3zTnBdQw=
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				QQ+3zTnBZpA=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>AirPortBrcm4360 - PCI Error 1</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				QTnEdRs=
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				QTnEZpA=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>10.11-BCM94352-CC=#a-Ramalama</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				QYP8/3QsSA==
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				ZscGI2HrKw==
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>Sierra Boot Logo Fix</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				AQAAdSU=
				</data>
				<key>Name</key>
				<string>IOGraphicsFamily</string>
				<key>Replace</key>
				<data>
				AQAA6yU=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>AirPortBrcm4360 - PCI Error 3</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				g33EBHQG
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				g33EBGaQ
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>10.11-BCM94352-Whitelest-0x4353-MacBoolAir5,2</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				TWFjLUM2RUZBNjM5NjJGQzZFQTA=
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				TWFjLTI3QURCQjdCNENFRThFNjE=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>BCM94352 Airport</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				gflSqgAAdSk=
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				gflSqgAAZpA=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>10.11-BCM94352-Whitelest-0x4331-iMac14,3</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				TWFjLUM2RUZBNjM5NjJGQzZFQTA=
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				TWFjLTI3QURCQjdCNENFRThFNjE=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>10.11-BCM94352-5GHz-US-FCC-dv</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				QYP8/3QsSA==
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				ZscGVVPrKw==
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>10.11-BCM94352-Airport-Extreme</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				axAAAHUN
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				axAAAJCQ
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>10.11-BT4LE-Handoff-Hotspot-lisai9093</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				SIX/dEdIiwc=
				</data>
				<key>Name</key>
				<string>IOBluetoothFamily</string>
				<key>Replace</key>
				<data>
				Qb4PAAAA60Q=
				</data>
			</dict>

 

And which kext have u copied in S/L/E ?

Link to comment
Share on other sites
toleda
toleda
Posted
  • Author
Posted

Adding this will work again on 10.12.1 if you had it working in 10.12.0

Not necessary, device id injection problem.  See Post #1, Airport Injection Methods

have "No hardware found".

 

There are no PCI errors for AW-CE123H, remove

See Problem Reporting, Post #1; attach all requested files

Link to comment
Share on other sites
UltraLaser
UltraLaser
Posted
Posted

There are no PCI errors for AW-CE123H, remove

See Problem Reporting, Post #1; attach all requested files

Problem posting befor upgrade : macOS 10.12

 

 

Problem Reporting (post to this thread with attachments)

1 Description of WiFi problem

Nothing, all works great

2 OS X version/motherboard model/BIOS version/processor/graphics

macOS Sierra 10.12 (16A323)/ Asus Z97i-Plus/ 2704 x64 02/18/2016/ Intel I3-4330T/ Asus Gtx 750Ti Strix

3 Procedure/Guide Used

In /S/L/E :

- BrcmFirmwareRepo.kext

- BrcmPatchRAM2.kext

- FakePCIID_Broadcom_WiFi.kext

- FakePCIID.kext

 

KextsToPatch :

 

Name : AirPortBrcm4360

Find* [HEX] : 81F952AA00007529

Replace * [HEX] : 81F952AA00006690

 

4 IOReg/File/Save a Copy As.../IORegistryExplorer_v2.1.zip (View Raw)

View attachment 12.10.IOReg

5 Console/All Messages/kernel airport - select/Save Selection As:

I don't have "kernel airpot"

6 Screen shots:

DPCIManager/Satus

System Information/Hardware/Bluetooth

System Information/Hardware/Network/WiFi

System Information/Hardware/USB (Select BRCM...)

View attachments

7 Clover (if installed)

EFI/Clover/config.plist

EFI/Clover/misc/debug.log (Set config.plist/Boot/Debug/YES)

EFI/Clover/ACPI/Patched/dsdt.aml if WiFi edited)

EFI/Clover/ACPI/Patched/ssdt.aml (if WiFi edited)

View attachments and no fiwi edited.

 

 

 

 

Problem posting after upgrade : macOS 10.12.1 :

 

 

 

Problem Reporting (post to this thread with attachments)

1 Description of WiFi problem

After upgraded to 10.12.1 -> No Hardware Installed (See attachment)

2 OS X version/motherboard model/BIOS version/processor/graphics

macOS Sierra 10.12.1 (16B2555)/ Asus Z97i-Plus/ 2704 x64 02/18/2016/ Intel I3-4330T/ Asus Gtx 750Ti Strix

3 Procedure/Guide Used

In /S/L/E :

- BrcmFirmwareRepo.kext

- BrcmPatchRAM2.kext

- FakePCIID_Broadcom_WiFi.kext

- FakePCIID.kext

 

KextsToPatch :

 

Name : AirPortBrcm4360

Find* [HEX] : 81F952AA00007529

Replace * [HEX] : 81F952AA00006690

 

4 IOReg/File/Save a Copy As.../IORegistryExplorer_v2.1.zip (View Raw)

View attachment 12.10.1.IOReg

5 Console/All Messages/kernel airport - select/Save Selection As:

I don't have "kernel airpot"

6 Screen shots:

DPCIManager/Satus

System Information/Hardware/Bluetooth

System Information/Hardware/Network/WiFi

System Information/Hardware/USB (Select BRCM...)

View attachments

7 Clover (if installed)

EFI/Clover/config.plist

EFI/Clover/misc/debug.log (Set config.plist/Boot/Debug/YES)

EFI/Clover/ACPI/Patched/dsdt.aml if WiFi edited)

EFI/Clover/ACPI/Patched/ssdt.aml (if WiFi edited)

View attachments and no fiwi edited.

 

 

 

 

 

EDIT :

 

I applied this patch :

 

Name : AirPortBrcm4360

Find : 4D61632D43364546413633393632464336454130

Replace : 4D61632D32374144424237423443454538453631

Comment : 10.11-BCM94352-Whitelest-0x4331-iMac14,3

 

Name : AirPortBrcm4360

Find : 81F952AA00007529

Replace : 81F952AA00006690

Comment : 10.12-BCM94352-5GHz-US-FCC-dv

 

Name : AirPortBrcm4360

Find : 4183FCFF742C48

Replace : 66C7062361EB2B

Comment : 10.11-BCM94352-CC=#a-Ramalama

 

Name : AirPortBrcm4360

Find : 4183FCFF742C48

Replace : 66C7065553EB2B

Comment : 10.11-BCM94352-5GHz-US-FCC-dv

 

Name : AirPortBrcm4360

Find : 6B100000750D

Replace : 6B1000009090

Comment : 10.11-BCM94352-Airport-Extreme

 

Name : AirPortBrcm4360

Find : 4D61632D43364546413633393632464336454130

Replace : 4D61632D32374144424237423443454538453631

Comment : 10.11-BCM94352-Whitelest-0x4353-MacBoolAir5,2

 

Name : IOBluetoothFamily

Find : 4885FF7447488B07

Replace : 41BE0F000000EB44

Comment : 10.11-BT4LE-Handoff-Hotspot-lisai9093

 

Copied kext IO80211Family.kext in SLE and I put 0x43a014E4 in WI-FI in Devices and now the WIFI and BT works great!!

 

Just a strange things : if I enable AddDTGP and FixAirpot then have KP! But without AddDTGP and FixAirport all works great

10.12.zip

10.12.1.zip

IO80211Family.kext.zip

Link to comment
Share on other sites
toleda
toleda
Posted
  • Author
Posted

if I enable AddDTGP and FixAirpot then have KP! But without AddDTGP and FixAirport all works great

Issue: clover/FixAirport does not work in 10.12.1

Suggestions: Remove Whitelist (2x), 10.11-BCM94352-5GHz-US-FCC-dv.

Use only if not US/FCC: 10.11-BCM94352-CC=#a-Ramalama

Do not need/use: FixAirport 

Link to comment
Share on other sites
UltraLaser
UltraLaser
Posted
Posted

Issue: clover/FixAirport does not work in 10.12.1

Suggestions: Remove Whitelist (2x), 10.11-BCM94352-5GHz-US-FCC-dv.

Use only if not US/FCC: 10.11-BCM94352-CC=#a-Ramalama

Do not need/use: FixAirport

Thanks! And thanks for your hard works!!
Link to comment
Share on other sites
colordeficiency
colordeficiency
Posted
Posted

Problem posting befor upgrade : macOS 10.12

 

 

Problem Reporting (post to this thread with attachments)

1 Description of WiFi problem

Nothing, all works great

2 OS X version/motherboard model/BIOS version/processor/graphics

macOS Sierra 10.12 (16A323)/ Asus Z97i-Plus/ 2704 x64 02/18/2016/ Intel I3-4330T/ Asus Gtx 750Ti Strix

3 Procedure/Guide Used

In /S/L/E :

- BrcmFirmwareRepo.kext

- BrcmPatchRAM2.kext

- FakePCIID_Broadcom_WiFi.kext

- FakePCIID.kext

 

KextsToPatch :

 

Name : AirPortBrcm4360

Find* [HEX] : 81F952AA00007529

Replace * [HEX] : 81F952AA00006690

 

4 IOReg/File/Save a Copy As.../IORegistryExplorer_v2.1.zip (View Raw)

View attachment 12.10.IOReg

5 Console/All Messages/kernel airport - select/Save Selection As:

I don't have "kernel airpot"

6 Screen shots:

DPCIManager/Satus

System Information/Hardware/Bluetooth

System Information/Hardware/Network/WiFi

System Information/Hardware/USB (Select BRCM...)

View attachments

7 Clover (if installed)

EFI/Clover/config.plist

EFI/Clover/misc/debug.log (Set config.plist/Boot/Debug/YES)

EFI/Clover/ACPI/Patched/dsdt.aml if WiFi edited)

EFI/Clover/ACPI/Patched/ssdt.aml (if WiFi edited)

View attachments and no fiwi edited.

 

 

 

 

Problem posting after upgrade : macOS 10.12.1 :

 

 

 

Problem Reporting (post to this thread with attachments)

1 Description of WiFi problem

After upgraded to 10.12.1 -> No Hardware Installed (See attachment)

2 OS X version/motherboard model/BIOS version/processor/graphics

macOS Sierra 10.12.1 (16B2555)/ Asus Z97i-Plus/ 2704 x64 02/18/2016/ Intel I3-4330T/ Asus Gtx 750Ti Strix

3 Procedure/Guide Used

In /S/L/E :

- BrcmFirmwareRepo.kext

- BrcmPatchRAM2.kext

- FakePCIID_Broadcom_WiFi.kext

- FakePCIID.kext

 

KextsToPatch :

 

Name : AirPortBrcm4360

Find* [HEX] : 81F952AA00007529

Replace * [HEX] : 81F952AA00006690

 

4 IOReg/File/Save a Copy As.../IORegistryExplorer_v2.1.zip (View Raw)

View attachment 12.10.1.IOReg

5 Console/All Messages/kernel airport - select/Save Selection As:

I don't have "kernel airpot"

6 Screen shots:

DPCIManager/Satus

System Information/Hardware/Bluetooth

System Information/Hardware/Network/WiFi

System Information/Hardware/USB (Select BRCM...)

View attachments

7 Clover (if installed)

EFI/Clover/config.plist

EFI/Clover/misc/debug.log (Set config.plist/Boot/Debug/YES)

EFI/Clover/ACPI/Patched/dsdt.aml if WiFi edited)

EFI/Clover/ACPI/Patched/ssdt.aml (if WiFi edited)

View attachments and no fiwi edited.

 

 

 

 

 

EDIT :

 

I applied this patch :

 

Name : AirPortBrcm4360

Find : 4D61632D43364546413633393632464336454130

Replace : 4D61632D32374144424237423443454538453631

Comment : 10.11-BCM94352-Whitelest-0x4331-iMac14,3

 

Name : AirPortBrcm4360

Find : 81F952AA00007529

Replace : 81F952AA00006690

Comment : 10.12-BCM94352-5GHz-US-FCC-dv

 

Name : AirPortBrcm4360

Find : 4183FCFF742C48

Replace : 66C7062361EB2B

Comment : 10.11-BCM94352-CC=#a-Ramalama

 

Name : AirPortBrcm4360

Find : 4183FCFF742C48

Replace : 66C7065553EB2B

Comment : 10.11-BCM94352-5GHz-US-FCC-dv

 

Name : AirPortBrcm4360

Find : 6B100000750D

Replace : 6B1000009090

Comment : 10.11-BCM94352-Airport-Extreme

 

Name : AirPortBrcm4360

Find : 4D61632D43364546413633393632464336454130

Replace : 4D61632D32374144424237423443454538453631

Comment : 10.11-BCM94352-Whitelest-0x4353-MacBoolAir5,2

 

Name : IOBluetoothFamily

Find : 4885FF7447488B07

Replace : 41BE0F000000EB44

Comment : 10.11-BT4LE-Handoff-Hotspot-lisai9093

 

Copied kext IO80211Family.kext in SLE and I put 0x43a014E4 in WI-FI in Devices and now the WIFI and BT works great!!

 

Just a strange things : if I enable AddDTGP and FixAirpot then have KP! But without AddDTGP and FixAirport all works great

 

The attached is an older kext. Anyone has IO80211Family.kext from 10.12 floating around?

Link to comment
Share on other sites
toleda
toleda
Posted
  • Author
Posted

 

Update v4.1 - 11/5/16 - 10.12.1 WiFi Injection stopped working (1. FakePCIID.kext and 5. Clover/FixAirport), see Post #1 Airport Injection Methods.


I've patched the original kexts (only add the device)

Clover patch: see Post #1/Airport Injection Methods/2. kext edit/Info.plist

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...