toleda Posted July 2, 2015 Author Share Posted July 2, 2015 is it ok to use country code as US since i'm in outside of us? no bro, set Sri Lanka (LK) see Post #1/BCM94352 5 GHz/BT Handoff Patch (10.10 and newer)/2. Patches/1. 10.10 and newer/1. Binary patch/2. Country Code Link to comment Share on other sites More sharing options...
PhantomUK Posted July 4, 2015 Share Posted July 4, 2015 I have been testing with some country codes. Normally I should be using GB as I'm in the UK but that limits the card to 400Mbit, when using US as a country code I get the full 867Mbit. It all works now, just need to fiddle some more to get HandOff working, so I'm happy ;-) Link to comment Share on other sites More sharing options...
lagoon Posted July 6, 2015 Share Posted July 6, 2015 Hi! I'm trying to enable my azurewave AW-CE123H (Broadcom 4352).I have followed the #1 post guide and my system recognize wifi card and bluetooth, but I cannot scan. I'm running Yosemite 10.10.4, I used the wireless_bcm94352-100-v3.0b.command with option 3 and CC IT. Someone can help me? EFI.zip screenshots.zip Link to comment Share on other sites More sharing options...
toleda Posted July 6, 2015 Author Share Posted July 6, 2015 I'm running Yosemite 10.10.4, I used the wireless_bcm94352-100-v3.0b.command with option 3 and CC IT. Unknown Locale is a problem. Remove bcm4352.kext. Restart. Reply with IOReg. Link to comment Share on other sites More sharing options...
lagoon Posted July 7, 2015 Share Posted July 7, 2015 Removing bcm4352.kext from clover the wifi is not recognized by the system, and the Bluetooth Handoff stops to work ioreg.txt Link to comment Share on other sites More sharing options...
toleda Posted July 8, 2015 Author Share Posted July 8, 2015 Removing bcm4352.kext bcm4352.kext is deprecated Post #1, see Airport (10.10 and newer) WiFi BCM94352 5 GHz/BT Handoff Patch (10.10 and newer) BCM94352 BT (10.10 and newer, 10.9 and newer) ioreg.txt is not worth looking at. Download Post #1/Tools/IOReg Link to comment Share on other sites More sharing options...
lagoon Posted July 8, 2015 Share Posted July 8, 2015 I'm a little confused.For recognize correctly the wifi I need to follow which guide?I have followed BCM94352 5 GHz/BT Handoff Patch (10.10 and newer) guide. - Installed kext/binary patch using Patch 3 (Handoff/BCM94352/Country Code) with Country code IT Then: - Installed All patches for Clover using config-bcm94352-103.plist.zip-- 5GHz: BCM94352-5GHz-US-FCC-dv -- BCM94352-Airport-Extreme -- BT4LE-Handoff-Hotspot EDIT: I have followed the #229 guide and Finded the IT code: Custom IT BCM94352 5 GHz (>10.10.3) Name AirPortBrcm4360 Find 41 83 FC FF 74 2C 48 Replace 66 C7 06 49 54 EB 2B Replaced to the US-FCC clover patch. After reboot nothing changed. Wifi not recognized, bluetooth recognized but no scan. ps. I have updated ioreg. ioreg.zip Link to comment Share on other sites More sharing options...
toleda Posted July 8, 2015 Author Share Posted July 8, 2015 Wifi not recognized, bluetooth recognized but no scan. Did not enable WiFi Post #1/Airport Injection Methods Try FakePCIID for BCM94352. or CLOVER/config.plist/ACPI/DSDT/Fixes/FixAirport Did not enable BT Post #1/BCM94352 BT (10.10 and newer, 10.9 and newer) Try BrcmPatchRAM.kext Link to comment Share on other sites More sharing options...
lagoon Posted July 8, 2015 Share Posted July 8, 2015 Using FakePCIID_BCM94352Z_as_BCM94360CS2.kext wifi was recognized. But unknown locale.Now wifi scan work, but only with 2,4 GHz and very low range. I can't connect to the wifi network showed in the picture. For Bluetooth I'm using BrcmPatchRAM.kext and BTFirmwareUploader.kext, but it doesn't scan. I have attached my current configuration. Orange tag for new kext, Green tag for old kext (not touched) and yellow tag for HWMonitor kexts. Archivio.zip Link to comment Share on other sites More sharing options...
toleda Posted July 9, 2015 Author Share Posted July 9, 2015 Now wifi scan work, but only with 2,4 GHz and very low range. For Bluetooth I'm using BrcmPatchRAM.kext and BTFirmwareUploader.kext, but it doesn't scan. 5 GHz channels available. Unknown, no idea what it should be. Two BT kexts, ensures neither work. Remove BTFirmwareUploader.kext Link to comment Share on other sites More sharing options...
lagoon Posted July 9, 2015 Share Posted July 9, 2015 Wifi not working, I created an hotspot with my smartphone and when I try to connect Diagnostic Tool advise me that It can't.I have attached a full diagnostic for the problem. I don't know if this can be useful. US with FCC locale can't be used instead of my current country locale? For bluetooth: Once removed BTFirmwareUploader.kext nothing changed. System recognize it, but I cannot see any devices.Maybe I need to modify the BrcmPatchRAM.kext, because I have a strange Bluetooth PID: 0x3411 ?? WirelessDiagnostics_XA22253IF5V8_2015-07-09_18.50.59.tar.gz Link to comment Share on other sites More sharing options...
Funky frank Posted July 12, 2015 Share Posted July 12, 2015 Hello, I use OSX 10.9.4 and an Atheros 9280. It works under OSX 10.6.8, but not under OSX 10.9.4. I already set the regdomain to 3A using HCU.exe (ETSI1, europe, DE).... But still the country locale is not set under OSX 10.9.4, only under OSX 10.6.8 it is set to DE. What can I do here now? Athreros40 is loaded, and bluetooth works, too! Thanks for help! Link to comment Share on other sites More sharing options...
toleda Posted July 13, 2015 Author Share Posted July 13, 2015 created an hotspot with my smartphone and when I try to connect Diagnostic Tool advise me that It can't. US with FCC locale can't be used instead of my current country locale? because I have a strange Bluetooth PID: 0x3411 ?? Not sure what a smartphone hotspot shows you. CC ensure RF compliance with local regulations, some US/FCC frequencies are not legal in your CC. Suggestion, check Locale on native hardware. Verify your device id is present in BrcmPatchRAM.kext It works under OSX 10.6.8, but not under OSX 10.9.4. Do not know what changed in 10.9.4. Link to comment Share on other sites More sharing options...
Funky frank Posted July 13, 2015 Share Posted July 13, 2015 toleda, thanks, I resolved the problem: I stupidly disabled airportD launchdaemon once, that's why it did not work! Link to comment Share on other sites More sharing options...
toleda Posted July 24, 2015 Author Share Posted July 24, 2015 7/23/2015 - 10.11 Initial support, BT Handoff patch updated Link to comment Share on other sites More sharing options...
joaodrp Posted July 24, 2015 Share Posted July 24, 2015 Hi Toleda, First off, thanks for your hard work, so I can enjoy my hanckintosh properly. I would like your help for the following question. What I have: 10.10.4 Clover Asus Z97I-PLUS with built-in Asus version of the AzureWave AW-CE 123H (PID 6095 VID 2821) I'm in Europe, Portugal ("PT" code) What I need: Wifi 2.4GHz/5GHz BT 3.0/4.0 Handoff AirDrop Is this the right procedure (below)? 1. Download toledaARPT.kext from toleda/airport_pcie-hm 2. Download BrcmPatchRAM.kext from robvanoostenrijk/BrcmPatchRAM 3. Run kext installer for both 4. Reboot 5. Run wireless_bcm94352-100-v3.0b.command 5.1. Choose "Handoff only" option 6. Apply config-bcm94352-103.plist changes to clover plist 7. Reboot I've gathered parts from .pdf files in your repo and from #1 instructions, but I got a little confused with all the options. Thanks! Link to comment Share on other sites More sharing options...
toleda Posted July 24, 2015 Author Share Posted July 24, 2015 Is this the right procedure (below)? 1. toledaARPT.kex is deprecated, see Post #1, Airport Injection Methods 5.1 Chose option 3, Handoff/BCM94352/Country Code 1 Link to comment Share on other sites More sharing options...
joaodrp Posted July 24, 2015 Share Posted July 24, 2015 1. toledaARPT.kex is deprecated, see Post #1, Airport Injection Methods 5.1 Chose option 3, Handoff/BCM94352/Country Code Ok, from there: "Airport Injection Methods/see Repo kext enabler, FakePCIID for BCM94352. https://bitbucket.or....i-id/downloads kext edit/Info.plist, see [Guide]_airport_half-mini_plist_edits.pdf dsdt edits, [Guide]_airport_half-mini_dsdt_edits.pdf ssdt enabler, see airport_ssdt_enabler folder" Only one method is required right? So from option 1, I would get the FakePCIID.kext and FakePCIID_BCM94352Z_as_BCM94360CS2.kext and install both. Final procedure would be: 1. Download FakePCIID.kext and FakePCIID_BCM94352Z_as_BCM94360CS2.kext from RehabMan/os-x-fake-pci-id 2. Download BrcmPatchRAM.kext from robvanoostenrijk/BrcmPatchRAM 3. Run kext installer for 1 and 2 4. Reboot 5. Run wireless_bcm94352-100-v3.0b.command 5.1. Chose option 3, Handoff/BCM94352/Country Code 6. Apply config-bcm94352-103.plist changes to clover plist 7. Reboot 8. Configure wifi and bluetooth interfaces in system preferences\network Thanks in advance. I hope this step-by-step to help not only me but others with the same card. Link to comment Share on other sites More sharing options...
toleda Posted July 24, 2015 Author Share Posted July 24, 2015 5. Run wireless_bcm94352-100-v3.0b.command 5.1. Chose option 3, Handoff/BCM94352/Country Code 6. Apply config-bcm94352-103.plist changes to clover plist One or the other, not both. 5 patches cache, 6 patches the kext. Link to comment Share on other sites More sharing options...
madins Posted August 13, 2015 Share Posted August 13, 2015 I have a question regarding to the 5G ac speed. An AW-CE123H using Clover with FAKEPCIID. Connection to 5G using ac is about 200Mbps and test speed is only 30Mbps. However, in Windows, the connection speed can reach 867Mbps with test speed of 74Mbps(the package speed). I've tested it with two different routers(both 1300Mbps 5G), but no difference. Is that a problem or it's just normal? What can I do to improve it as the desktop and router won't be able to move? Link to comment Share on other sites More sharing options...
toleda Posted August 13, 2015 Author Share Posted August 13, 2015 Is that a problem or it's just normal? What can I do to improve it as the desktop and router won't be able to move? No. 4352 is 2x, max 867 Mbps. What antennas? What does System Information/Network/Wi-Fi or Menu Bar/Option/WiFi icon show? Link to comment Share on other sites More sharing options...
madins Posted August 14, 2015 Share Posted August 14, 2015 No. 4352 is 2x, max 867 Mbps. What antennas? What does System Information/Network/Wi-Fi or Menu Bar/Option/WiFi icon show? This is the information shown in System Information. Link to comment Share on other sites More sharing options...
scififan68 Posted August 15, 2015 Share Posted August 15, 2015 The BCM4352 still works great in 10.10.5, but zero bluetooth is seen, I tried the latest kexts and patches and still nothing, in the end I decided to just remove the bluetooth kexts until there is solution found. Link to comment Share on other sites More sharing options...
toleda Posted August 15, 2015 Author Share Posted August 15, 2015 This is the information shown in System Information. Antenna problem, signal is too low. The BCM4352 still works great in 10.10.5, but zero bluetooth is seen, No known Bluetooth issues in 10.10.5. Link to comment Share on other sites More sharing options...
madins Posted August 16, 2015 Share Posted August 16, 2015 Antenna problem, signal is too low. Thank you. I am using the original antenna from Asus. Maybe it's better to switch to a pair of high gain antennas. Link to comment Share on other sites More sharing options...
Recommended Posts