Tiberio Galbiati Posted January 15, 2015 Share Posted January 15, 2015 Hello,i have a BCM43225HMB wifi+ bt card on my pro book. Bluetooth is working but i have to fix wi-fi. Please, could you tell me how to get wi fi working? thank you. Link to comment Share on other sites More sharing options...
ballistic Posted January 15, 2015 Share Posted January 15, 2015 Which boot loader are you using? 1 Link to comment Share on other sites More sharing options...
Tiberio Galbiati Posted January 16, 2015 Share Posted January 16, 2015 Which boot loader are you using? I'm using Clover. Link to comment Share on other sites More sharing options...
toleda Posted January 16, 2015 Author Share Posted January 16, 2015 Please, could you tell me how to get wi fi working? See Post #1/Broadcom Device_IDs/2. Supported Device_IDs (injection required) Link to comment Share on other sites More sharing options...
Tiberio Galbiati Posted January 16, 2015 Share Posted January 16, 2015 See Post #1/Broadcom Device_IDs/2. Supported Device_IDs (injection required) I have discovered that my card, bought on ebay as BCM43225HMB is not supported because it has a8d8 as device id. I'll have to buy a new one, but you can I be sure that the card I'llbuy has the right device id? for example is this card supported? thank you in advance Edit: i have found also this one Link to comment Share on other sites More sharing options...
toleda Posted January 20, 2015 Author Share Posted January 20, 2015 Edit: i have found also this one If the card is the same as shown, supported. See Post #1. Link to comment Share on other sites More sharing options...
ballistic Posted January 21, 2015 Share Posted January 21, 2015 Sorry for the cheeky spam but if you are in the UK you could buy this http://pages.ebay.com/link/?nav=item.view&alt=web&id=121543112953 Works OOB on 10.10 Link to comment Share on other sites More sharing options...
Tiberio Galbiati Posted January 21, 2015 Share Posted January 21, 2015 Thanks to all, but i'm in Italy and it is actually pretty difficult to find a right card. for example some Amazon store don't offer international shipping. Link to comment Share on other sites More sharing options...
flyingfishfinger_1 Posted January 27, 2015 Share Posted January 27, 2015 Hi, Looking for assistance getting this to work on an MLPF build. I have an Azurewave AW-CE123H, which works fine on 10.8.5 pre-MLPF but breaks immediately following the application thereof. I've attached my files both pre- and post MLPF. I have a feeling that the kexts don't load in 32-bit mode. If so, is there a fix? System is Thinkpad X61 C2D T8300, 8GB RAM, Crucial M500 SATA and the above Wifi card. Installed via bcm4352.kext (to S/L/E, but neither works post-MLPF). Thanks, R AzureWave_Pre.zip AzureWave_Post.zip Link to comment Share on other sites More sharing options...
alter Hase Posted January 28, 2015 Share Posted January 28, 2015 Hello, my AW-CE123H will not work in 5GHz after updating to 10.10.2. I am using Clover to patch. Is there a fix? Link to comment Share on other sites More sharing options...
Laserion Posted January 28, 2015 Share Posted January 28, 2015 Hi everyone... I have installed Yosemite on my first Hackintosh. I have an Asrock z97e-itx motherboard, which has a Broadband's chip. I guess that is a BCM94352HMB, but I'm not sure of this. Is there a something to do for discover which wifi-card i have installed? Actually, my airport doesn't work properly. When I installed it, I followed this guide; http://forum.osxlatitude.com/index.php?/topic/2925-bluetooth-firmware-uploader/?hl=bcm94352 but the result has been that now my airport card can be recognise by the OS, but i can't find my home's wi-fi 5.00 GHz net and the bluetooth doesn't work properly (my magic mouse goes in spurts).I tried to follow the guide in the first page, but i didn't understand nothing. Is there a more discursive guide? Link to comment Share on other sites More sharing options...
AREOS Posted January 28, 2015 Share Posted January 28, 2015 Hello, my AW-CE123H will not work in 5GHz after updating to 10.10.2. I am using Clover to patch. Is there a fix? For the Airport cosmetic fix you can still use the old one. find 6B100000750D replace 6B1000009090 for the 5Ghx fix you can use the 10.10.2 beta patch previously posted find 5854005D1954210000 replace 5553008DA85EB60009 and for the handoff fix you can use this one previously posted too. find 4885C0745C0FB748 replace 41BE0F000000EB59 Tested in 10.10.2 official update build 14C109. Good Luck 3 Link to comment Share on other sites More sharing options...
alter Hase Posted January 28, 2015 Share Posted January 28, 2015 For the Airport cosmetic fix you can still use the old one. find 6B100000750D replace 6B1000009090 for the 5Ghx fix you can use the 10.10.2 beta patch previously posted find 5854005D1954210000 replace 5553008DA85EB60009 and for the handoff fix you can use this one previously posted too. find 4885C0745C0FB748 replace 41BE0F000000EB59 Tested in 10.10.2 official update build 14C109. Good Luck Thanks AREOS, I changed only the 5GHz patch and its working well. Link to comment Share on other sites More sharing options...
lisai9093 Posted January 29, 2015 Share Posted January 29, 2015 Another solution for Airport Extreme identification is to use Rehabman's Fake-PCI-ID which can fake subendor ID! Link to comment Share on other sites More sharing options...
madman Posted January 29, 2015 Share Posted January 29, 2015 I bought the BCM94360CD and the card is recognized OTB. Handoff works. But I have an issue with AirDrop. (iPad / iPhone to iMac 13,1) It either does not work at all, or it is very slow to transfer files. Or is just disconnects the transfer because of a timeout. Is this a known issue? Edit 1: Wifi and LAN is currently connected and now it works like it should, very fast and stable. Any idea to get rid of a connected Wifi connection and to use only LAN? Link to comment Share on other sites More sharing options...
Andrw0380 Posted January 31, 2015 Share Posted January 31, 2015 For anyone who doesn't want to modify there IO802.11Family and IOBluetoothFamily to work with Yosemite. I updated the Clover patch so if you use this: <key>KextsToPatch</key> <array> <dict> <key>Comment</key> <string>10.10-BCM94352-5 GHz-US-FCC</string> <key>Find</key> <data>WFQAXRlUIQAA</data> <key>Name</key> <string>AirPortBrcm4360</string> <key>Replace</key> <data>VVMAjahetgAJ</data> </dict> <dict> <key>Comment</key> <string>10.10-BT4LE-Handoff-Hotspot</string> <key>Find</key> <data>SIXAdFwPt0g=</data> <key>Name</key> <string>IOBluetoothFamily</string> <key>Replace</key> <data>Qb4PAAAA61k=</data> </dict> </array> This will do the same thing as modifying the files and using Kext Wizard except it's more cleaner so next update, 5Ghz should remain unless Apple changes the code. FYI I am using Rehabman's FakePCI as discussed earlier so I don't need the Airport Extreme name patch. 3 Link to comment Share on other sites More sharing options...
chummdoggin Posted February 2, 2015 Share Posted February 2, 2015 10.10.2 breaks continuity patch or something on the 94352 combo here. Replaced iobluetoothfamily from 10.1 for now. Functionality? unsure. Used the updated patch on the vanilla functionality is good after much, (for me) trial. Link to comment Share on other sites More sharing options...
MikeKiller Posted February 6, 2015 Share Posted February 6, 2015 Someone here that has a BCM943224 HMS? I can't get Apple's own kext to load because of their whitelisting using BoardID's. When using MacBookAir5,2 (which Clover then generates the appropriate BoardID for) I can see it load during boot but hangs (since that product name is not compatible with my system), but when using MacBookPro8,3 it does't work at all, even though I've patched AirPort_Brcm4360's BoardID. Does anyone here know the answer? I've attached my config.plist in case someone wants to see this. <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>ACPI</key> <dict> <key>DSDT</key> <dict> <key>Debug</key> <false/> <key>Fixes</key> <dict> <key>AddDTGP_0001</key> <true/> <key>AddMCHC_0008</key> <false/> <key>FakeLPC_0020</key> <false/> <key>FixAirport_4000</key> <true/> <key>FixDarwin_0002</key> <true/> <key>FixDisplay_0100</key> <true/> <key>FixFirewire_0800</key> <true/> <key>FixHDA_8000</key> <true/> <key>FixHPET_0010</key> <true/> <key>FixIDE_0200</key> <false/> <key>FixIPIC_0040</key> <true/> <key>FixLAN_2000</key> <true/> <key>FixSATA_0400</key> <false/> <key>FixSBUS_0080</key> <true/> <key>FixShutdown_0004</key> <true/> <key>FixUSB_1000</key> <true/> <key>NewWay_80000000</key> <true/> <key>FIX_RTC_20000</key> <true/> <key>FIX_TMR_40000</key> <true/> <key>AddIMEI_80000</key> <false/> <key>FIX_INTELGFX_100000</key> <false/> <key>FIX_WAK_200000</key> <true/> <key>DeleteUnused_400000</key> <true/> <key>FIX_ADP1_800000</key> <true/> <key>AddPNLF_1000000</key> <true/> <key>FIX_S3D_2000000</key> <true/> <key>FIX_ACST_4000000</key> <true/> <key>AddHDMI_8000000</key> <true/> <key>FixRegions_10000000</key> <true/> </dict> <key>Name</key> <string>DSDT.aml</string> <key>ReuseFFFF</key> <false/> </dict> <key>DropTables</key> <array> <dict> <key>Signature</key> <string>DMAR</string> </dict> <dict> <key>Signature</key> <string>SSDT</string> <key>TableId</key> <string>CpuPm</string> </dict> <dict> <key>Signature</key> <string>SSDT</string> <key>TableId</key> <string>Cpu0Ist</string> </dict> </array> <key>HaltEnabler</key> <true/> <key>SSDT</key> <dict> <key>Generate</key> <dict> <key>CStates</key> <true/> <key>PStates</key> <true/> </dict> </dict> </dict> <key>Boot</key> <dict> <key>Arguments</key> <string>kext-dev-mode=1</string> <key>DefaultLoader</key> <string>boot.efi</string> <key>DefaultVolume</key> <string>LastBootedVolume</string> <key>NeverHibernate</key> <false/> <key>Fast</key> <false/> <key>Legacy</key> <string>PBR</string> <key>Debug</key> <false/> <key>Timeout</key> <integer>5</integer> </dict> <key>Devices</key> <dict> <key>NoDefaultProperties</key> <false/> <key>Audio</key> <dict> <key>ResetHDA</key> <true/> </dict> <key>UseIntelHDMI</key> <false/> <key>USB</key> <dict> <key>AddClockID</key> <true/> <key>FixOwnership</key> <true/> <key>HighCurrent</key> <false/> <key>Inject</key> <true/> </dict> <dict> <key>WIFI</key> <string>0x43A014E4</string> </dict> </dict> <key>GUI</key> <dict> <key>ScreenResolution</key> <string>1920x1080</string> <key>Theme</key> <string>metal</string> </dict> <key>Graphics</key> <key>KernelAndKextPatches</key> <dict> <key>AppleRTC</key> <true/> <key>AsusAICPUPM</key> <false/> <key>Debug</key> <false/> <key>KernelCpu</key> <false/> <key>KernelPm</key> <false/> <key>KernelLapic</key> <false/> <key>KernelHaswellE</key> <false/> <key>KextsToPatch</key> <array> <dict> <key>Find</key> <data>RXh0ZXJuYWw=</data> <key>Name</key> <string>AppleAHCIPort</string> <key>Replace</key> <data>SW50ZXJuYWw=</data> </dict> <dict> <key>Comment</key> <string>TRIM function for non-Apple SSDs</string> <key>Find</key> <data>QVBQTEUgU1NEAA==</data> <key>Name</key> <string>IOAHCIBlockStorage</string> <key>Replace</key> <data>AAAAAAAAAAAAAA==</data> </dict> <dict> <key>Comment</key> <string>Whitelist BCM943224 for MacBookPro8,3</string> <key>Name</key> <string>AirPortBrcm4360</string> <key>Find</key> <data>TWFjLUM2RUZBNjM5NjJGQzZFQTA=</data> <key>Replace</key> <data>TWFjLTk0MjQ1OUY1ODE5QjE3MUI=</data> </dict> </array> </dict> <key>SystemParameters</key> <dict> <key>InjectKexts</key> <true/> <key>InjectSystemID</key> <true/> </dict> </dict> </plist> Link to comment Share on other sites More sharing options...
toleda Posted February 8, 2015 Author Share Posted February 8, 2015 hangs (since that product name is not compatible with my system), but when using MacBookPro8,3 it does't work at all Boot problems are off topic. When booting, see Post #1, Problem Reporting. Attach all requested files. Link to comment Share on other sites More sharing options...
toleda Posted February 13, 2015 Author Share Posted February 13, 2015 Update v2.4, 2/12/2015 - 10.10.2 Update See Post #1. Link to comment Share on other sites More sharing options...
maleorderbride Posted February 16, 2015 Share Posted February 16, 2015 I have a BCM4360 (0x14E4, 0x8659) which displays Locale: Unknown Country Code: XT in 10.10.2 /w Clover. I would like to use the Clover KextsToPatch feature--can anyone help with that? I saw the Country XT patches posted earlier, but they all seemed to apply to other cards. Is that patch card specific, or can I use it Thanks! Link to comment Share on other sites More sharing options...
ballistic Posted February 16, 2015 Share Posted February 16, 2015 I have a BCM4360 (0x14E4, 0x8659) which displays Locale: Unknown Country Code: XT in 10.10.2 /w Clover. I would like to use the Clover KextsToPatch feature--can anyone help with that? I saw the Country XT patches posted earlier, but they all seemed to apply to other cards. Is that patch card specific, or can I use it Thanks! Have you seen this? https://discussions.apple.com/thread/3656144 Link to comment Share on other sites More sharing options...
maleorderbride Posted February 16, 2015 Share Posted February 16, 2015 Have you seen this? https://discussions.apple.com/thread/3656144 I have not. That is interesting, but I prefer to set this via Clover. Link to comment Share on other sites More sharing options...
ballistic Posted February 16, 2015 Share Posted February 16, 2015 I actually meant to point out that the country code is set by the router and transmitted to the Mac. Setting the router correctly is the proper way to fix it. Link to comment Share on other sites More sharing options...
maleorderbride Posted February 17, 2015 Share Posted February 17, 2015 I actually meant to point out that the country code is set by the router and transmitted to the Mac. Setting the router correctly is the proper way to fix it. Ah, I see. So mine is XT, is that a problem? The Locale is also Unknown, is that linked to country code or a separate issue? Link to comment Share on other sites More sharing options...
Recommended Posts