10.9 GM Released.

Simonej · October 15, 2013

@The Real Deal: good work! Could you share Bios settings? How did iMac14,2 SMBIOS?

Thanks

xing108 · October 15, 2013

Have you tried this: http://goo.gl/4g7JR (also applied to genuine machines). At the end, don`t forget repair permissions with Disk Utility. Works for me in ML.

When I through Mix downside patch "slowly sleep,restart,shutdown problem seems be sloved & when restart or shutdown CMOS reset problem" Now my system 99.99% working Out Of the Box.

mitch_de, on 12 Jun 2013 - 03:35 AM, said:

Got CMOS reset problem - used patched 10.8 AppleRTC but that doesnt worked.

Can we use the old patch on new 10.9 RTC kext?

No, it won't patch anything.

Try this

sudo perl -pi -e 's|\x75\x2e\x0f\xb6|\xeb\x2e\x0f\xb6|' /System/Library/Extensions/AppleRTC.kext/Contents/MacOS/AppleRTC

Actually it's the same patch as 10.8 just different position

http://www.insanelym...y-applertckext/

10.8

< 0000000000001d32 jne 0x1d64

---

> 0000000000001d32 jmp 0x1d64

10.9

< 0000000000000d3e jne 0xd6e

---

> 0000000000000d3e jmp 0xd6e

The Real Deal · October 15, 2013

@The Real Deal: good work! Could you share Bios settings? How did iMac14,2 SMBIOS?

Thanks

BIOS settings ? Just need to "optimized defaults" to be OS X compliant with my board in sig

For iMac14,2 you need to browse geekbench charts. I got some infos there too : http://pikeralpha.wordpress.com/ and some googling

My serial number is incomplete apart some right digits for iMac14,2 and i need the SMC version (REV in FakeSMC) too for this babies

Simonej · October 15, 2013

Thank you! With my GA-Z87N i'm testing some changes from "optimize defaults", now with EIST disabled and Turbo @4.2.

I haven't yet learned how to make serial numbers, with "Haswell" SMBios works better? With my macmini6.1 i have CPU P-States [ 8 34 35 (36) 37 ] (with no OC)

kun · October 15, 2013

yes, its working 10.9gm

its from 10.9 dp2

@Regi unfortunately that didn't work for me. I just have to replace IONetworkingFamily with the one you provide right? I don't know what i'm doing is wrong.

Here is the log error.

Oct 16 00:18:53 HQ com.apple.kextd[12]: WARNING - Invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext "/System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleBCM5701Ethernet.kext"
Oct 16 00:18:53 HQ com.apple.kextd[12]: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleBCM5701Ethernet.kext - no dependency found for com.apple.driver.mDNSOffloadUserClient.
Oct 16 00:18:53 HQ com.apple.kextd[12]: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleBCM5701Ethernet.kext - no compatible dependency found for com.apple.iokit.IOEthernetAVBController.
Oct 16 00:18:53 HQ com.apple.kextd[12]: Can't load /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleBCM5701Ethernet.kext - failed to resolve dependencies.
Oct 16 00:18:53 HQ com.apple.kextd[12]: Load com.apple.iokit.AppleBCM5701Ethernet failed; removing personalities from kernel.
Oct 16 00:18:55 HQ kernel[0]: kxld[com.apple.iokit.IOUserEthernet]: The super class vtable '__ZTV20IOEthernetController' for vtable '__ZTV24IOUserEthernetController' is out of date. Make sure your kext has been built against the correct headers.
Oct 16 00:18:55 HQ kernel[0]: Can't load kext com.apple.iokit.IOUserEthernet - link failed.
Oct 16 00:18:55 HQ kernel[0]: Kext com.apple.iokit.IOUserEthernet failed to load (0xdc008016).
Oct 16 00:18:55 HQ kernel[0]: Failed to load kext com.apple.iokit.IOUserEthernet (error 0xdc008016).
Oct 16 00:18:55 HQ com.apple.kextd[12]: Failed to load /System/Library/Extensions/IOUserEthernet.kext - (libkern/kext) link error.
Oct 16 00:18:55 HQ com.apple.kextd[12]: Load com.apple.iokit.IOUserEthernet failed; removing personalities from kernel.

Regi Yassin · October 15, 2013

ionetworkfamily.kext plugins folder

do not replace ionetworkfam kext

XanthraX · October 15, 2013

this work fine for me on 10.9

http://lnx2mac.blogspot.com/p/realtekrtl81xx-osx-driver.html

good luck

@drnick,

Thank you for this installer, it did not work with the realtek, but it showed an ethernet card just warned me it's unplugged, but resolved some conflicts, so I put back the Yukon based IONetworking and it worked. I finally resolved the sound using VoodooHDA, but only accompanied by HDA disabler, well the volume is very soft, but I have a sound device. I resolved the CMOS reset, using Pandora, any other AppleRTC kext patched didn't work. At least, I have a working Mavericks on p5k-vm.

kun · October 15, 2013

ionetworkfamily.kext plugins folder

do not replace ionetworkfam kext

@regi

That's what I did. I put kext you attaced into plugins folder inside IONetworkingFamily.kext replacing the old one.

Here is some log if any useful. Thanks !

Oct 16 00:18:53 HQ com.apple.kextd[12]: WARNING - Invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext "/System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleBCM5701Ethernet.kext"
Oct 16 00:18:53 HQ com.apple.kextd[12]: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleBCM5701Ethernet.kext - no dependency found for com.apple.driver.mDNSOffloadUserClient.
Oct 16 00:18:53 HQ com.apple.kextd[12]: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleBCM5701Ethernet.kext - no compatible dependency found for com.apple.iokit.IOEthernetAVBController.
Oct 16 00:18:53 HQ com.apple.kextd[12]: Can't load /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleBCM5701Ethernet.kext - failed to resolve dependencies.
Oct 16 00:18:53 HQ com.apple.kextd[12]: Load com.apple.iokit.AppleBCM5701Ethernet failed; removing personalities from kernel.
Oct 16 00:18:55 HQ kernel[0]: kxld[com.apple.iokit.IOUserEthernet]: The super class vtable '__ZTV20IOEthernetController' for vtable '__ZTV24IOUserEthernetController' is out of date. Make sure your kext has been built against the correct headers.
Oct 16 00:18:55 HQ kernel[0]: Can't load kext com.apple.iokit.IOUserEthernet - link failed.
Oct 16 00:18:55 HQ kernel[0]: Kext com.apple.iokit.IOUserEthernet failed to load (0xdc008016).
Oct 16 00:18:55 HQ kernel[0]: Failed to load kext com.apple.iokit.IOUserEthernet (error 0xdc008016).
Oct 16 00:18:55 HQ com.apple.kextd[12]: Failed to load /System/Library/Extensions/IOUserEthernet.kext - (libkern/kext) link error.
Oct 16 00:18:55 HQ com.apple.kextd[12]: Load com.apple.iokit.IOUserEthernet failed; removing personalities from kernel.

@ROBASEFR · October 15, 2013

@drnick,

Thank you for this installer, it did not work with the realtek, but it showed an ethernet card just warned me it's unplugged, but resolved some conflicts, so I put back the Yukon based IONetworking and it worked. I finally resolved the sound using VoodooHDA, but only accompanied by HDA disabler, well the volume is very soft, but I have a sound device. I resolved the CMOS reset, using Pandora, any other AppleRTC kext patched didn't work. At least, I have a working Mavericks on p5k-vm.

Try this AppleRTC.kext. Works for me 100% on Mavericks GM and Gigabyte EX58-UD5

AppleRTC.kext.zip

Good luck

XanthraX · October 16, 2013

Try this AppleRTC.kext. Works for me 100% on Mavericks GM and Gigabyte EX58-UD5

AppleRTC.kext.zip

Good luck

Thank you.

fau7i · October 16, 2013

hi.. is this supposed to be working on 10.9 GM? Tried on mine, no dice. Z77 Extreme4 ;-(

Hi... for BCM57781 on my Z77 Extreme6, I use this one http://www.insanelymac.com/forum/files/file/79-bcm5722d/. Put inside PlugIns folder and delete AppleBCM5701Ethernet.kext.

kun · October 17, 2013

Hi... for BCM57781 on my Z77 Extreme6, I use this one http://www.insanelymac.com/forum/files/file/79-bcm5722d/. Put inside PlugIns folder and delete AppleBCM5701Ethernet.kext.

Can't install.. got this.

https://www.dropbox.com/s/lac17tmhlcxge4c/Screenshot%202013-10-17%2008.52.00.png

fau7i · October 17, 2013

Just ignore the warning, repair permission and rebuild caches.

XanthraX · October 17, 2013

OK friends, I got a system fully functional on Asus P5K-VM. The last issue was the sound, worked with VoodooHDA, but very soft volume. I found here and AppleHDA patched for ALC883 that works perfectly in Mavericks

http://www.insanelymac.com/forum/topic/292721-no-sound-with-alc883/

oSxFr33k · October 17, 2013

Try this AppleRTC.kext. Works for me 100% on Mavericks GM and Gigabyte EX58-UD5

AppleRTC.kext.zip

Good luck

Will this work on any Motherboard needing the cmos reset patch? Was the script posted here a few posts back to patch the vanilla one?

DarwinX · October 17, 2013

Will this work on any Motherboard needing the cmos reset patch? Was the script posted here a few posts back to patch the vanilla one?

Yes, the binary Perl script is provided by oldnapalm in the following forum topic: AppleRTC patch (CMOS reset after sleep/wake)

sudo perl -pi -e 's|\x75\x2e\x0f\xb6|\xeb\x2e\x0f\xb6|' /AppleRTC.kext/Contents/MacOS/AppleRTC

For the convenience of all, here is the 10.9's AppleRTC.kext 2.0, Perl patched with the aforementioned script

to prevent the CMOS chip reset which occurs upon the Sleep mode invocation:

AppleRTC.kext-v2.0.zip

artur_pt · October 20, 2013

hello

seem new gm build ..

http://www.macrumors.com/2013/10/20/apple-seeds-new-build-of-os-x-mavericks-golden-master/

good hack

TechGuru · October 20, 2013

hello

seem new gm build ..

http://www.macrumors.com/2013/10/20/apple-seeds-new-build-of-os-x-mavericks-golden-master/

good hack

yes there is Dev Update OS X 10.9 Mavericks Golden Master (13A603) i am downloading it now and will do a fresh install when i get home with full benchmarks and if i need a drivers or not

Andy Vandijck · October 20, 2013

hello

seem new gm build ..

http://www.macrumors.com/2013/10/20/apple-seeds-new-build-of-os-x-mavericks-golden-master/

good hack

Damn... not another GM :-(

joe75 · October 20, 2013

they are slow.. this was out friday

Zenith432 · October 20, 2013

So "Golden Master" is now "Release Candidate"?

joe75 · October 20, 2013

its still labeled as GM ~~and i just found out some have had this as their original GM install~~

nvm, the installer image was 603 but installed 598

Huckleberry Pie · October 21, 2013

Wonder if someone would do an unofficial update package so that we wouldn't be forced to download another 5 gigabytes, but meh, I guess I'll settle for getting the GA build at the App Store once it's live.

rlf · October 21, 2013

nvm, the installer image was 603 but installed 598

Inside the installer app that I got, the installer image is 10.9 13A603 while the installation packages identify as 10.8.5 12F45. All of this according to the SystemVersion.plist's.

The MD5 of the InstallESD.dmg is f222952400db8535c03697c3293e168e

WTF

artur_pt · October 21, 2013

hello

is real

for now i don't see nothing more

good hack

10.9 GM Released.

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites