Alex009988 Posted October 6, 2013 Share Posted October 6, 2013 Alex. Maybe you have a incompatible or incomplete SSDT table(s) of P and C states. I am talking about the script by RevoGirl to patch those Tables. Anyway, try this flags all together: DropSSDT=Yes GeneratePStates=Yes GenerateCStates=Yes But I have a question: You have actually a stable working system (same hardware configuration) in ML 10.8.X? Unfortunately, with these flags, the result is the same.Of course, I have the stable working system called Mavericks DP8 with working sleep. I took DSDT from there, the only change is Allouatta to Zonalis. Also, I don't use any SSDT, only DSDT. EDIT 1 I tried it with Clover as well. The only change is it shuts down after white screen with mouse. And in this case, I even doesn't see the clause of choosing languages. Link to comment Share on other sites More sharing options...
bretticus Posted October 6, 2013 Share Posted October 6, 2013 Networking is working great now, but I am getting weird freezes with certain programs. So far, Word, VLC, and Transmission are all completely freezing the system when I open them. Any clue what could be going on? These were working fine in ML. Link to comment Share on other sites More sharing options...
TheEnthusiast Posted October 6, 2013 Share Posted October 6, 2013 Not sure what's happening on your end. All those applications launch for me. Link to comment Share on other sites More sharing options...
Andy Vandijck Posted October 6, 2013 Share Posted October 6, 2013 Did a clean install of 10.9 GM on a friends hackintosh. Everything works fine. Also updated a real MacBookPro8,1 with the stick and it works great too... Now update of my hackintosh I'm really impressed by the new OS. 1 Link to comment Share on other sites More sharing options...
bretticus Posted October 6, 2013 Share Posted October 6, 2013 Well, I've narrowed it down to graphics. I am using a Radeon 6950, which is known to be difficult to get working. Used ML AMDRadeonX3000 and AMDRadeonAccelerator kexts, which previously worked with full QE/CI. After disabling those, no more crashes, though of course I have no acceleration. I think it may be related to the AMDRadeonAccelerator.kext, as I was getting kernel messages that it was not loaded. Any ideas? I will be searching around for any workarounds people found during the developer previews... Link to comment Share on other sites More sharing options...
Gen4ig Posted October 6, 2013 Share Posted October 6, 2013 Anybody have a problem with iMessage? I can not sign in GM. In 10.8.5 and to DP8 I has not problem. All other services are working fine: FaceTime, iCloud. I try Clover and Chameleon Link to comment Share on other sites More sharing options...
diskeeper Posted October 6, 2013 Share Posted October 6, 2013 Same here with newest Clover. Link to comment Share on other sites More sharing options...
theconnactic Posted October 6, 2013 Share Posted October 6, 2013 Here iMessage and FaceTime work just fine, but i was asked to sign in again just after migrating my old user, and had to reboot for them to actually activate. All the best! Link to comment Share on other sites More sharing options...
CooSee Posted October 6, 2013 Share Posted October 6, 2013 no problems for me clean install with myHack. greetings Link to comment Share on other sites More sharing options...
pulsar68 Posted October 6, 2013 Share Posted October 6, 2013 Hi all. Just installed Mavericks GM on my Hackintosh (clean install with MyHack) but when it starts I got a KP as in the image below: What's wrong with it? I guess something about the CPU C-State? All works perfect with ML 10.8.5 Any help is very appreciate My specs: Asus P9X79Pro Intel i7 3930K 32GB RAM @1600Mhz GTX 670 Link to comment Share on other sites More sharing options...
p.H Posted October 7, 2013 Share Posted October 7, 2013 Hi all. Just installed Mavericks GM on my Hackintosh (clean install with MyHack) but when it starts I got a KP as in the image below: DSCF0331.JPG What's wrong with it? I guess something about the CPU C-State? All works perfect with ML 10.8.5 Any help is very appreciate My specs: Asus P9X79Pro Intel i7 3930K 32GB RAM @1600Mhz GTX 670 Remove your IONetworking kext. Remember to back it up though. Link to comment Share on other sites More sharing options...
RobertX Posted October 7, 2013 Share Posted October 7, 2013 ...did the upgrade path: from 10.8.5 to mavericks...a work in progress but all seems well... had to re-fix AGPM and applelpc .... Link to comment Share on other sites More sharing options...
pulsar68 Posted October 7, 2013 Share Posted October 7, 2013 Remove your IONetworking kext. Remember to back it up though. Removed and seems to work now Thanks very much. Just to know, what is it IONetworking kext? Sorry but I'm quite newbie in Mac/Hackintosh universe Link to comment Share on other sites More sharing options...
p.H Posted October 7, 2013 Share Posted October 7, 2013 Removed and seems to work now Thanks very much. Just to know, what is it IONetworking kext? Sorry but I'm quite newbie in Mac/Hackintosh universe It contains lots of kexts which will make your ethernet card working. Link to comment Share on other sites More sharing options...
pulsar68 Posted October 7, 2013 Share Posted October 7, 2013 It contains lots of kexts which will make your ethernet card working. Ok, thanks for explained me. Anyway I patched my ethernet card working with Intel - hnak's AppleIntelE1000e v2.5.4c Link to comment Share on other sites More sharing options...
AsusFreak Posted October 7, 2013 Author Share Posted October 7, 2013 I've had a lot of issues with skype and facetime using 2.5.4c, no problem at all with 2.4.14 Link to comment Share on other sites More sharing options...
TUX FIRE Posted October 7, 2013 Share Posted October 7, 2013 Which version of fakesmc do you use ? I have the dsmos has arrived error Link to comment Share on other sites More sharing options...
oldnapalm Posted October 7, 2013 Share Posted October 7, 2013 Which version of fakesmc do you use ? I have the dsmos has arrived error This is not an error, it's expected. A problem would be "waiting for DSMOS" forever. 1 Link to comment Share on other sites More sharing options...
mendietinha Posted October 7, 2013 Share Posted October 7, 2013 using mbp 8.1 smbios the agpm did not show up even editing and i was experiencing minor graphics glitches. don´t really know why but i fixed by changing to mbp 8.2. Link to comment Share on other sites More sharing options...
Huckleberry Pie Posted October 7, 2013 Share Posted October 7, 2013 Was it just me or does the Extra/Extensions folder refuse to work on my install? I have no problem with shoving things in SLE, it's just that whatever kext that's in EE doesn't load. I'm thinking that it could be the Chameleon bootloader that's at fault, but any ideas? Link to comment Share on other sites More sharing options...
p.H Posted October 7, 2013 Share Posted October 7, 2013 Was it just me or does the Extra/Extensions folder refuse to work on my install? I have no problem with shoving things in SLE, it's just that whatever kext that's in EE doesn't load. I'm thinking that it could be the Chameleon bootloader that's at fault, but any ideas? It's said that Apple is becoming more restrict on kext stuff. 1 Link to comment Share on other sites More sharing options...
Andy Vandijck Posted October 7, 2013 Share Posted October 7, 2013 I upgraded both my disks with GM. It works just fine. Booting with kernelcache and all extra extensions in /S/L/E. It works fine then. ATI 6450 works fine thanks to Clover ATI patch. Had to use 10.8.4 AppleHDA for stopping audio crackling after 2 mins of playing. AGPM and LPC edit. Everything works fine. Link to comment Share on other sites More sharing options...
p.H Posted October 7, 2013 Share Posted October 7, 2013 I upgraded both my disks with GM. It works just fine. Booting with kernelcache and all extra extensions in /S/L/E. It works fine then. ATI 6450 works fine thanks to Clover ATI patch. Had to use 10.8.4 AppleHDA for stopping audio crackling after 2 mins of playing. AGPM and LPC edit. Everything works fine. Hi, Andy. You managed to get ATI card AGPM working? You understand the parameter in AGPM plist for ATI cards? Link to comment Share on other sites More sharing options...
Huckleberry Pie Posted October 7, 2013 Share Posted October 7, 2013 It's said that Apple is becoming more restrict on kext stuff. Could be, idk. At least things seem to work fine now on my end. Just decided to use VoodooHDA rather than mess around with the AppleHDA kext with a hacked/patched one. Link to comment Share on other sites More sharing options...
beasty uk Posted October 7, 2013 Share Posted October 7, 2013 Well i have a z77-ds3h and a gtx650ti and it installed great. BUT in OpenCL_OceanWave_Bandwidth_V161 i only get 60fps when i usually get 330 anyone fix this yet? osx runs very smooth and fast Link to comment Share on other sites More sharing options...
Recommended Posts