zorz Posted October 23, 2015 Share Posted October 23, 2015 Install successfuly passed!!! Only one way to success instalation was Clover EFI instalation on usb stick with ElCapitan. To be continued (breaked by my job)... Here i am again ElCapitan is significanly speeded than Yosemite and booting like a charm with built in Oz in BIOS. Here is the proof of installation. Link to comment Share on other sites More sharing options...
zorz Posted October 24, 2015 Share Posted October 24, 2015 After a couple of hours i must have return to Yosemite. After xx times of rebooting (testing) coclused that i have to install Clover or my systm wouldn´t boot properly. My Recovery HD partition was gone (it´s normaly for elcapitan) but i have no any chanse to access it to copy prelinkedkenel file and maybe that´s the reason why elcapitan wont boot properly every reboot. Also i have problem with sound. Once sound worked (second reboot) and no more. Why is that... i don´t know. Put it in /L/E of elcapitan and in Oz folders on EFI, always the same. No sound... To be continued... Link to comment Share on other sites More sharing options...
regs1980 Posted October 25, 2015 Share Posted October 25, 2015 Works in the new Ozmosis version Fusion Drive and Sleep mode correctly, or back half and the Fans turn at max. Link to comment Share on other sites More sharing options...
NSCXP2005 Posted October 25, 2015 Share Posted October 25, 2015 Sorry if this has been asked before. Can Ozmosis be used on a laptop phoenix bios? Thanks Link to comment Share on other sites More sharing options...
0xE2 Posted October 25, 2015 Share Posted October 25, 2015 Sorry if this has been asked before. Can Ozmosis be used on a laptop phoenix bios? Thanks No. Link to comment Share on other sites More sharing options...
NSCXP2005 Posted October 25, 2015 Share Posted October 25, 2015 OK. Why not? Link to comment Share on other sites More sharing options...
mhaeuser Posted October 25, 2015 Share Posted October 25, 2015 American Megatrend UEFIs are the ones Oz is mostly used on, but I can't see why Phoenix shouldn't work. Just try loading it from Shell (requires you to strip the FFS header off, which lasts till the first occurence of 'MZ'). EnhancedFat and HFSPlus should be in ROM anyway - even if you won't use Oz in the end, FAT access will be quicker and you don't need Clover to load HFSPlus seperately. 2 Link to comment Share on other sites More sharing options...
Mr. Xtreme Posted October 26, 2015 Share Posted October 26, 2015 I can't find the extffs in ozmosis 1479.rom can anyone upload it/help me find it. P.S. I'm using the ozmosis rom from tuxuser's ozmosis repositorie on github. Link to comment Share on other sites More sharing options...
zorz Posted October 27, 2015 Share Posted October 27, 2015 Again report from ElCapitan now working like a charm with Oz in BIOS. Strange usb flash preparation and Clover post install on EFI partition created by Oz. After that (installation) first reboot i have made from usb Clover and installed Clover on my EFI partition (EFI version of a Clover). After that i installed CustoMacEssentials.pkg/reboot then voodoohda.kext from MultyBeast package and reboot again. Form F12 boot meny i have choose UEFI partition of install HDD with Clover on it but with freez in moment and Kernel Panic error After that a have try to boot from elcapitan partition (that means fully function of Oz) and voila. Boot like a charm wthout any freezes and with my voodoohda.kext loaded but without any prelinkedkenel repairing or somethin else... For now, all working excellent! Link to comment Share on other sites More sharing options...
joe75 Posted October 28, 2015 Share Posted October 28, 2015 I can't find the extffs in ozmosis 1479.rom can anyone upload it/help me find it. http://www.mediafire.com/download/5bm05cbp13ztu2p/ExtFs.ffs 1 Link to comment Share on other sites More sharing options...
Mr. Xtreme Posted October 28, 2015 Share Posted October 28, 2015 Thanks joe75 . Link to comment Share on other sites More sharing options...
MacintoshHealer Posted November 8, 2015 Share Posted November 8, 2015 It's intel bios, i suspect it's hard to put ozmosis into intel bios this is >> https://downloadcenter.intel.com/download/24354/BIOS-Update-FLB8510H-86A- Does not support on Intel mobo!!! Actually i have ozmosis running on Intel NUC so the problem was more how to get modified BIOS into Intel MoBo.... I used a flash programmer to read the BIOS and to flash it back and it works! Link to comment Share on other sites More sharing options...
firefly_can_fly Posted November 10, 2015 Share Posted November 10, 2015 I know, last news were "its ready, when its ready", but maybe someone got new info about where new Oz would come? 1 Link to comment Share on other sites More sharing options...
Aigors Posted November 10, 2015 Share Posted November 10, 2015 Actually i have ozmosis running on Intel NUC so the problem was more how to get modified BIOS into Intel MoBo.... I used a flash programmer to read the BIOS and to flash it back and it works! had you desoldered bios or have you used a clips to read and flash back bios? Link to comment Share on other sites More sharing options...
mhaeuser Posted November 10, 2015 Share Posted November 10, 2015 I know, last news were "its ready, when its ready", but maybe someone got new info about where new Oz would come? I took the liberty of marking the only answer you will get till it's ready in your quote. 1 Link to comment Share on other sites More sharing options...
firefly_can_fly Posted November 12, 2015 Share Posted November 12, 2015 I took the liberty of marking the only answer you will get till it's ready in your quote. i know, I've read the thread before. Just checking, if something changed in month Link to comment Share on other sites More sharing options...
zorz Posted November 12, 2015 Share Posted November 12, 2015 I must have to return normal BIOS to my mobo because of Oz bootup problems with ElCapitan. Now i have a Clover with only one boot modd (USB fix) to recognise my USB ports (i have lost my own made DSDT and SSDT (erased HDD)) and that's all. I have no waitings when booting in comparison to Oz, so why not Clover as BL? With USB fix all work's like a charm and without any problems, but waiting for shorten Oz version for ElCapitan. Link to comment Share on other sites More sharing options...
Aigors Posted November 16, 2015 Share Posted November 16, 2015 Actually i have ozmosis running on Intel NUC so the problem was more how to get modified BIOS into Intel MoBo.... I used a flash programmer to read the BIOS and to flash it back and it works! Can You Show howto? i have spi programmer and the needing skills to remove bios chip Link to comment Share on other sites More sharing options...
MattsCreative Posted November 26, 2015 Share Posted November 26, 2015 Z77MXQUOAOS.H2N.OZ1669M - BASED ON Z77MXQUOAOS.F2N BIOS BIOS: UPDATED CPU MicroCode SandyBridge 6A7-29/IvyBridge 6A9-1B UPDATED OROM/EFI IRST RAID for SATA - v14.6.0.2285 UPDATED EFI GOP Driver IvyBridge - 3.0.1027 / SandyBridge - 2.0.1024 UPDATED HermitShell with SETVAR application/fixed BCFG application OZMOSIS: FIXED All reported bugs ADDED RAID and El Capitan support second link https://www.sendspace.com/file/tsd65b third link https://mega.nz/#!gFBwVQQT!yWufDqqQeZw2YcHP9Ee4WqjFQfwkXUW_KowQHOf0y_w ok let's hope this brings this dead thread to life the other one was getting whiny 1 Link to comment Share on other sites More sharing options...
CrazyCreator Posted November 26, 2015 Share Posted November 26, 2015 Ok ... I start Ozmosis found only one RAM Slot, but i have 2 bdmesg: Last login: Thu Nov 26 22:58:59 on ttys000 El-Captain:~ CrazyCreator$ bdmesg 00:000 00:000 Ozmosis 1.03.1669M RELEASE (2015-11-03 22:35:59 VS2013x86) on 2015-11-26 21:54:39 00:000 00:000 Found Firmware UEFI Spec :2.31: 00:000 00:000 Found Firmware Vendor :American Megatrends: 00:000 00:000 Found Firmware Revision :4.653: 05:341 05:341 BootOrder 00 01 02 03 08 0D 0C 04 0E 0F 10 11 12 13 05:341 00:000 Found Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (3A.06.00) Cores 4 Threads 4 05:341 00:000 P-State Coordination Type HW_ALL -> SW_ANY = SW_ANY 05:341 00:000 Bus Ratio 16 - 34 (41) Unlocked 05:341 00:000 Disabling Invalid Flex-Ratio F0000 -> E0000 = E0000 05:341 00:000 TSC Frequency 3403346150 3403MHz 05:341 00:000 CPU Frequency 4104035056 4104MHz 05:341 00:000 FSB Frequency 100098416 100MHz 05:341 00:000 Found 00.01.00.0 Amd Graphics Controller [1002:68B8] [106B:00CF] rev 0 05:341 00:000 Found 00.03.00.0 Realtek Lan Controller [10EC:8168] [1458:E000] rev 6 00:00:00:00:00:00 05:341 00:000 Found 00.04.00.0 Realtek Lan Controller [10EC:8168] [1458:E000] rev 6 00:00:00:00:00:00 05:341 00:000 Found 00.05.00.0 Broadcom Wireless Lan Controller [14E4:43A0] [106B:0111] rev 3 00:00:00:00:00:00 05:341 00:000 Found 00.00.1F.3 Intel SMBUS Controller [8086:1E22] [1458:5001] rev 4 05:342 00:001 Slot 0 8192MB DDR3 SDRAM 1600MHz "Corsair" "CMZ16GX3M2A1600C1" "00000000" 05:347 00:004 Found 1 GPU Controller 05:347 00:000 Found Storage PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)/HD(1,GPT,D97D2E06-8EF3-4B88-868F-92787A676716,0x28,0x64000) with the old version the same problem, but i have think i wait on the new release with hope of solved. Link to comment Share on other sites More sharing options...
MattsCreative Posted November 26, 2015 Share Posted November 26, 2015 Ok ... I start Ozmosis found only one RAM Slot, but i have 2 bdmesg: Last login: Thu Nov 26 22:58:59 on ttys000 El-Captain:~ CrazyCreator$ bdmesg 00:000 00:000 Ozmosis 1.03.1669M RELEASE (2015-11-03 22:35:59 VS2013x86) on 2015-11-26 21:54:39 00:000 00:000 Found Firmware UEFI Spec :2.31: 00:000 00:000 Found Firmware Vendor :American Megatrends: 00:000 00:000 Found Firmware Revision :4.653: 05:341 05:341 BootOrder 00 01 02 03 08 0D 0C 04 0E 0F 10 11 12 13 05:341 00:000 Found Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (3A.06.00) Cores 4 Threads 4 05:341 00:000 P-State Coordination Type HW_ALL -> SW_ANY = SW_ANY 05:341 00:000 Bus Ratio 16 - 34 (41) Unlocked 05:341 00:000 Disabling Invalid Flex-Ratio F0000 -> E0000 = E0000 05:341 00:000 TSC Frequency 3403346150 3403MHz 05:341 00:000 CPU Frequency 4104035056 4104MHz 05:341 00:000 FSB Frequency 100098416 100MHz 05:341 00:000 Found 00.01.00.0 Amd Graphics Controller [1002:68B8] [106B:00CF] rev 0 05:341 00:000 Found 00.03.00.0 Realtek Lan Controller [10EC:8168] [1458:E000] rev 6 00:00:00:00:00:00 05:341 00:000 Found 00.04.00.0 Realtek Lan Controller [10EC:8168] [1458:E000] rev 6 00:00:00:00:00:00 05:341 00:000 Found 00.05.00.0 Broadcom Wireless Lan Controller [14E4:43A0] [106B:0111] rev 3 00:00:00:00:00:00 05:341 00:000 Found 00.00.1F.3 Intel SMBUS Controller [8086:1E22] [1458:5001] rev 4 05:342 00:001 Slot 0 8192MB DDR3 SDRAM 1600MHz "Corsair" "CMZ16GX3M2A1600C1" "00000000" 05:347 00:004 Found 1 GPU Controller 05:347 00:000 Found Storage PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)/HD(1,GPT,D97D2E06-8EF3-4B88-868F-92787A676716,0x28,0x64000) with the old version the same problem, but i have think i wait on the new release with hope of solved. bet it will be a super long wait Link to comment Share on other sites More sharing options...
THe KiNG Posted November 26, 2015 Share Posted November 26, 2015 Ok ... I start Ozmosis found only one RAM Slot, but i have 2 bdmesg: Last login: Thu Nov 26 22:58:59 on ttys000 El-Captain:~ CrazyCreator$ bdmesg 00:000 00:000 Ozmosis 1.03.1669M RELEASE (2015-11-03 22:35:59 VS2013x86) on 2015-11-26 21:54:39 00:000 00:000 Found Firmware UEFI Spec :2.31: 00:000 00:000 Found Firmware Vendor :American Megatrends: 00:000 00:000 Found Firmware Revision :4.653: 05:341 05:341 BootOrder 00 01 02 03 08 0D 0C 04 0E 0F 10 11 12 13 05:341 00:000 Found Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (3A.06.00) Cores 4 Threads 4 05:341 00:000 P-State Coordination Type HW_ALL -> SW_ANY = SW_ANY 05:341 00:000 Bus Ratio 16 - 34 (41) Unlocked 05:341 00:000 Disabling Invalid Flex-Ratio F0000 -> E0000 = E0000 05:341 00:000 TSC Frequency 3403346150 3403MHz 05:341 00:000 CPU Frequency 4104035056 4104MHz 05:341 00:000 FSB Frequency 100098416 100MHz 05:341 00:000 Found 00.01.00.0 Amd Graphics Controller [1002:68B8] [106B:00CF] rev 0 05:341 00:000 Found 00.03.00.0 Realtek Lan Controller [10EC:8168] [1458:E000] rev 6 00:00:00:00:00:00 05:341 00:000 Found 00.04.00.0 Realtek Lan Controller [10EC:8168] [1458:E000] rev 6 00:00:00:00:00:00 05:341 00:000 Found 00.05.00.0 Broadcom Wireless Lan Controller [14E4:43A0] [106B:0111] rev 3 00:00:00:00:00:00 05:341 00:000 Found 00.00.1F.3 Intel SMBUS Controller [8086:1E22] [1458:5001] rev 4 05:342 00:001 Slot 0 8192MB DDR3 SDRAM 1600MHz "Corsair" "CMZ16GX3M2A1600C1" "00000000" 05:347 00:004 Found 1 GPU Controller 05:347 00:000 Found Storage PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)/HD(1,GPT,D97D2E06-8EF3-4B88-868F-92787A676716,0x28,0x64000) with the old version the same problem, but i have think i wait on the new release with hope of solved. And you have RAM installed on what Slots? If you want to be fixed in a next release post a darwindumper report, dev's cannot work with chunk of dumps... bet it will be a super long wait I see you just want to make noise, so I will ignore your garbage. Link to comment Share on other sites More sharing options...
mhaeuser Posted November 26, 2015 Share Posted November 26, 2015 bet it will be a super long wait Then shorten the timeframe and go solve it. Link to comment Share on other sites More sharing options...
CrazyCreator Posted November 26, 2015 Share Posted November 26, 2015 And you have RAM installed on what Slots? If you want to be fixed in a next release post a darwindumper report, dev's cannot work with chunk of dumps... My Board have two Slots and i have two RAM installed (the same RAM) I'm going and make a dump ... Link to comment Share on other sites More sharing options...
THe KiNG Posted November 26, 2015 Share Posted November 26, 2015 My Board have two Slots and i have two RAM installed (the same RAM) I'm going and make a dump ... If you have Windows also make a ReadWriteEverything dump for original SMBios. Link to comment Share on other sites More sharing options...
Recommended Posts