Aigors Posted May 18, 2015 Share Posted May 18, 2015 Yes, i backup the bios with AFUDOS (i ran it from DOS USB). Just syntax: And then, how to change VRAM from 128 to 96 in bios? I dont know how I sent message to you. If you have time, please help me. You should found setting into your bios, post your bios so i can check. Dont edit bios on notebook, the risk of brick it's high. Link to comment Share on other sites More sharing options...
tuanpekoe Posted May 18, 2015 Share Posted May 18, 2015 You should found setting into your bios, post your bios so i can check. Dont edit bios on notebook, the risk of brick it's high. Thank you This is my Bios that extracted from AFUDOS. http://www.mediafire.com/download/esb3zv0865tpv9b/AMIBOOT.ROM Link to comment Share on other sites More sharing options...
Aigors Posted May 18, 2015 Share Posted May 18, 2015 https://www.dropbox.com/s/nqcq1zrr1ga5jp9/Graphic-configuration.png?dl=0 Link to comment Share on other sites More sharing options...
tuanpekoe Posted May 18, 2015 Share Posted May 18, 2015 https://www.dropbox.com/s/nqcq1zrr1ga5jp9/Graphic-configuration.png?dl=0 Sorry, but could you help me change and repack it, and tell me how to reflash bios? I dont have knowledge about bios anymore. (My graphics included Geforce 820M) Link to comment Share on other sites More sharing options...
Aigors Posted May 18, 2015 Share Posted May 18, 2015 Sorry, but could you help me change and repack it, and tell me how to reflash bios? I dont have any knowledge about bios. my intention was to show you where is setting in your bios. To change the viewing you have to change access from default to user. This is your bios modified, i suggest you modify by yourself keep in mind that you can brick your laptop, to flash you have to use afudos from usb stick i dont remember command line, but it's' easy to know Try at your own risk, i can't try if it works or not, i'm not responsible for any damage. https://www.dropbox.com/s/54kcru6jolsorc4/AMIBOO.zip?dl=0 1 Link to comment Share on other sites More sharing options...
tuanpekoe Posted May 18, 2015 Share Posted May 18, 2015 my intention was to show you where is setting in your bios. To change the viewing you have to change access from default to user. This is your bios modified, i suggest you modify by yourself keep in mind that you can brick your laptop, to flash you have to use afudos from usb stick i dont remember command line, but it's' easy to know Try at your own risk, i can't try if it works or not, i'm not responsible for any damage. https://www.dropbox.com/s/54kcru6jolsorc4/AMIBOO.zip?dl=0 Thank you so much I wonder if it isn't success, how to recovery bios? Link to comment Share on other sites More sharing options...
Aigors Posted May 18, 2015 Share Posted May 18, 2015 Thank you so much I wonder if it isn't success, how to recovery bios? i don't know if there is a flasback procedure like for asus mobo, read manual or search on google, in the worst case you need to RMA 1 Link to comment Share on other sites More sharing options...
tuanpekoe Posted May 18, 2015 Share Posted May 18, 2015 i don't know if there is a flasback procedure like for asus mobo, read manual or search on google, in the worst case you need to RMA I have opened AMIBOOTMODIFIED.ROM and go to "Graphics Configuration" but i dont see anything changed, it is the same with original bios. Link to comment Share on other sites More sharing options...
Aigors Posted May 18, 2015 Share Posted May 18, 2015 I have opened AMIBOOTMODIFIED.ROM and go to "Graphics Configuration" but i dont see anything changed, it is the same with original bios. Opened with what? amibcp? you have to flash bios to change value, amicbp it's' intended to show hidden menu' not to change options in bios, you can change option in bios but if you set one option that forbid boot you have to change it with amibcp, i told you, to show hidden menu you have to change ACCESS from default to user, click two times and voila, you can see several level of views about this specific settings But we are off topic 1 Link to comment Share on other sites More sharing options...
Gen4ig Posted May 18, 2015 Share Posted May 18, 2015 Is it pissible to add in Ozmosis function which will be edited DSDT in bios, for example through by OzmosisDefoult.plist? Yes, mean patch through by cashes. Important to edited processor sections with P/C state and about type processor through by cashes. And else one question: Kext2Ffs utility for convert to ffs, but how to make reverse, from ffs to kext? Thanks Link to comment Share on other sites More sharing options...
crusher Posted May 20, 2015 Share Posted May 20, 2015 Is it pissible to add in Ozmosis function which will be edited DSDT in bios, for example through by OzmosisDefoult.plist? Yes, mean patch through by cashes. Important to edited processor sections with P/C state and about type processor through by cashes. And else one question: Kext2Ffs utility for convert to ffs, but how to make reverse, from ffs to kext? Thanks Use UEFITool and open rom file. After press command+F and going to TEXT section and write OzmosisDefaults . You now found OzmosisDefaults right click and going to Extract body is and give name Deaults.plist and Save to desktop. You have file Defaults.plist.fbd you remove fbd and use plist This is done. 2 Link to comment Share on other sites More sharing options...
Aigors Posted May 21, 2015 Share Posted May 21, 2015 Use UEFITool and open rom file. Screen Shot 2015-05-20 at 11.15.42 PM.png After press command+F and going to TEXT section and write OzmosisDefaults . Screen Shot 2015-05-20 at 11.16.08 PM.png You now found OzmosisDefaults right click and going to Extract body is and give name Deaults.plist and Save to desktop. Screen Shot 2015-05-20 at 11.29.01 PM.png Screen Shot 2015-05-20 at 11.33.31 PM.png You have file Defaults.plist.fbd you remove fbd and use plist This is done. as far you know, can i reinsert body after my own modification? Link to comment Share on other sites More sharing options...
crusher Posted May 21, 2015 Share Posted May 21, 2015 as far you know, can i reinsert body after my own modification? Replace body is....I hope you understand me. Link to comment Share on other sites More sharing options...
Aigors Posted May 21, 2015 Share Posted May 21, 2015 Replace body is....I hope you understand me. yes Replace body my mistake 1 Link to comment Share on other sites More sharing options...
iQred Posted June 3, 2015 Share Posted June 3, 2015 Hi, friends, I'm not an expert, but tried to make its asus maximus v formula and I did not. Bios beg , but when the installation is to boot disk utility . I just twisted colorful circle all. I could not help looking at my bios ? I would be very grateful. https://www.dropbox.com/s/9hs99r671s35ury/M5F.CAP.zip?dl=0 Link to comment Share on other sites More sharing options...
Aigors Posted June 3, 2015 Share Posted June 3, 2015 Hi, friends, I'm not an expert, but tried to make its asus maximus v formula and I did not. Bios beg , but when the installation is to boot disk utility . I just twisted colorful circle all. I could not help looking at my bios ? I would be very grateful. https://www.dropbox.com/s/9hs99r671s35ury/M5F.CAP.zip?dl=0 Hi, i don't understand your problem, i'v look inside your bios and it seems that all the things needed are in place, You need to put into bios even IONetWorkingFamily kex to use Apple1000 kext natively into bios. In which way you update your modified bios? as far i know when you modify capsule file ( bios with signature ) the signature become invalid and on board utility refuse to update modified bios, to avoid, you can use AFUDOS to make backup of your running bios, do the mod into this then, reuse afudos to update. To use afudos you need a usb dos boot stick 1 Link to comment Share on other sites More sharing options...
crusher Posted June 3, 2015 Share Posted June 3, 2015 Hi, friends, I'm not an expert, but tried to make its asus maximus v formula and I did not. Bios beg , but when the installation is to boot disk utility . I just twisted colorful circle all. I could not help looking at my bios ? I would be very grateful. https://www.dropbox.com/s/9hs99r671s35ury/M5F.CAP.zip?dl=0 No need kexts in rom file. Put kext in S/L/E or EFI/Oz/Darwin/Common/Extensions. Use this rom file: Format USB in FAT32 ot FAT16 and put in USB afte turn off you PC and press gumb FLASBACK!!!! 1 Link to comment Share on other sites More sharing options...
bongmasterdarky Posted June 3, 2015 Share Posted June 3, 2015 Hi I have managed to get my computer booting with Clover now But I would like to try ozmosis I have tired to use the OZM tool but i get a error saying the Image has Exploded and the bios does not work how can I fix this also in clover i have to use the fakecpuid of 0x000306A0 to enable osx to boot would i need to add this to my defaults.plist the same way as i have done in clover here is the link for my bios https://www.dropbox.com/s/5lw7sul0lwxvn4x/mb_bios_ga-h81m-ds2v_f5.zip?dl=0 my hardware is gigabyte H81M-DS2V Intel G3258 cpu 4gb Ram I know the graphics doesnt work on the intel i use a nvidia g210 which in clover has the injectnvidia open to make it work Thanks Link to comment Share on other sites More sharing options...
crusher Posted June 3, 2015 Share Posted June 3, 2015 Hi I have managed to get my computer booting with Clover now But I would like to try ozmosis I have tired to use the OZM tool but i get a error saying the Image has Exploded and the bios does not work how can I fix this also in clover i have to use the fakecpuid of 0x000306A0 to enable osx to boot would i need to add this to my defaults.plist the same way as i have done in clover here is the link for my bios https://www.dropbox.com/s/5lw7sul0lwxvn4x/mb_bios_ga-h81m-ds2v_f5.zip?dl=0 my hardware is gigabyte H81M-DS2V Intel G3258 cpu 4gb Ram I know the graphics doesnt work on the intel i use a nvidia g210 which in clover has the injectnvidia open to make it work Thanks Ok this is you rom: I put this file in your rom: |173|PartitionDxe |1FA1F39E-FEFF-4AAE-BD7B-38A070A3B609|0089237F|002E68|DRVR| |174|HfsPlus |4CF484CD-135F-4FDC-BAFB-1AA104B48D36|008951E7|006174|DRVR| |175|EnhancedFat |961578FE-B6B7-44C3-AF35-6BC705CD2B1F|0089B35B|005E38|DRVR| |176|OzmosisDefaults|99F2839C-57C3-411E-ABC3-ADE5267D960D|008A1193|00076C|FRFM| |177|Ozmosis |AAE65279-0761-41D1-BA13-4A3C1383603F|008A18FF|056B6C|DRVR| |178|OzmosisBlackThe|AC255206-DCF9-4837-8353-72BBBC0AC849|008F846B|030BB0|FRFM| |179|ExtFs |B34E5765-2E04-4DAF-867F-7F40BE6FC33D|0092901B|0022D7|DRVR| |180|SmcEmulatorKext|DADE1001-1B31-4FE4-8557-26FCEFC78275|0092B2F2|04733C|FRFM| |181|DisablerKext |DADE1002-1B31-4FE4-8557-26FCEFC78275|0097262E|0108A2|FRFM| |182|InjectorKext |DADE1003-1B31-4FE4-8557-26FCEFC78275|00982ED0|000512|FRFM| |183|CpuSensorsKext |DADE1006-1B31-4FE4-8557-26FCEFC78275|009833E2|01AD1A|FRFM| |184|LpcSensorsKext |DADE1007-1B31-4FE4-8557-26FCEFC78275|0099E0FC|036DDE|FRFM| |185|GpuSensorsKext |DADE1008-1B31-4FE4-8557-26FCEFC78275|009D4EDA|0592BE|FRFM| 1 Link to comment Share on other sites More sharing options...
Aigors Posted June 3, 2015 Share Posted June 3, 2015 Hi I have managed to get my computer booting with Clover now But I would like to try ozmosis I have tired to use the OZM tool but i get a error saying the Image has Exploded and the bios does not work how can I fix this also in clover i have to use the fakecpuid of 0x000306A0 to enable osx to boot would i need to add this to my defaults.plist the same way as i have done in clover here is the link for my bios https://www.dropbox.com/s/5lw7sul0lwxvn4x/mb_bios_ga-h81m-ds2v_f5.zip?dl=0 my hardware is gigabyte H81M-DS2V Intel G3258 cpu 4gb Ram I know the graphics doesnt work on the intel i use a nvidia g210 which in clover has the injectnvidia open to make it work Thanks Hi, Ozmosis need only few files to work, EnanchedFat fakesmc hfsplus Ozmosis OmzmosisBlackTheme OzmosisDefault. H81MDS2V-F5-Ozmosis.zip here is your bios, try at your own risk 1 Link to comment Share on other sites More sharing options...
bongmasterdarky Posted June 3, 2015 Share Posted June 3, 2015 Hi, Ozmosis need only few files to work, EnanchedFat fakesmc hfsplus Ozmosis OmzmosisBlackTheme OzmosisDefault. H81MDS2V-F5-Ozmosis.zip here is your bios, try at your own risk Ok this is you rom: H81MDS2V-CRU_OZM1479.zip I put this file in your rom: |173|PartitionDxe |1FA1F39E-FEFF-4AAE-BD7B-38A070A3B609|0089237F|002E68|DRVR| |174|HfsPlus |4CF484CD-135F-4FDC-BAFB-1AA104B48D36|008951E7|006174|DRVR| |175|EnhancedFat |961578FE-B6B7-44C3-AF35-6BC705CD2B1F|0089B35B|005E38|DRVR| |176|OzmosisDefaults|99F2839C-57C3-411E-ABC3-ADE5267D960D|008A1193|00076C|FRFM| |177|Ozmosis |AAE65279-0761-41D1-BA13-4A3C1383603F|008A18FF|056B6C|DRVR| |178|OzmosisBlackThe|AC255206-DCF9-4837-8353-72BBBC0AC849|008F846B|030BB0|FRFM| |179|ExtFs |B34E5765-2E04-4DAF-867F-7F40BE6FC33D|0092901B|0022D7|DRVR| |180|SmcEmulatorKext|DADE1001-1B31-4FE4-8557-26FCEFC78275|0092B2F2|04733C|FRFM| |181|DisablerKext |DADE1002-1B31-4FE4-8557-26FCEFC78275|0097262E|0108A2|FRFM| |182|InjectorKext |DADE1003-1B31-4FE4-8557-26FCEFC78275|00982ED0|000512|FRFM| |183|CpuSensorsKext |DADE1006-1B31-4FE4-8557-26FCEFC78275|009833E2|01AD1A|FRFM| |184|LpcSensorsKext |DADE1007-1B31-4FE4-8557-26FCEFC78275|0099E0FC|036DDE|FRFM| |185|GpuSensorsKext |DADE1008-1B31-4FE4-8557-26FCEFC78275|009D4EDA|0592BE|FRFM| Hi thanks for the bios i have no flashed it on first boot i see the hermit the crabs boot logo then the computer reboots and shows the apple logo like its trying to boot but the bar hangs and doesnt get any further, I tried to boot in Verbose mode and the boot hangs at USBMSC Identifier (non-Unique) Its like the Booting has Stalled I have dumped my DSDT with clover by pressing F4 but i get a few errors when compiling it DSDT.zip Link to comment Share on other sites More sharing options...
Aigors Posted June 3, 2015 Share Posted June 3, 2015 Hi thanks for the bios i have no flashed it on first boot i see the hermit the crabs boot logo then the computer reboots and shows the apple logo like its trying to boot but the bar hangs and doesnt get any further, I tried to boot in Verbose mode and the boot hangs at USBMSC Identifier (non-Unique) Its like the Booting has Stalled I have dumped my DSDT with clover by pressing F4 but i get a few errors when compiling it Swap usb key from usb3 port in usb2 port, look if you have ine usb port under ps/2 plug on mobo Link to comment Share on other sites More sharing options...
bongmasterdarky Posted June 3, 2015 Share Posted June 3, 2015 Swap usb key from usb3 port in usb2 port, look if you have ine usb port under ps/2 plug on mobo I tired that now the boot stops at VM swap Subsystem is on and it does not boot any further i attached a picture of where it gets stuck to Thanks Link to comment Share on other sites More sharing options...
Aigors Posted June 3, 2015 Share Posted June 3, 2015 Try to disconnect HDD Link to comment Share on other sites More sharing options...
iQred Posted June 3, 2015 Share Posted June 3, 2015 No need kexts in rom file. Put kext in S/L/E or EFI/Oz/Darwin/Common/Extensions. Use this rom file: MAXIMUS-V-FORMULA-ASUS-1903CRU_OZM1479.zip Format USB in FAT32 ot FAT16 and put in USB afte turn off you PC and press gumb FLASBACK!!!! rj5BrAfjNdq2ff8Y_500.jpg Thank you very much for your attention! I sew in your BIOS . There was a cpu panic, but I unlock MSR and everything went well . Tell me I do not have sound. The sound of clover worked with dummy and laytout 1 and there is no config and it is not clear to me to put 1 laytout. Link to comment Share on other sites More sharing options...
Recommended Posts