Jump to content

Ozmosis


xpamamadeus
6,231 posts in this topic

Recommended Posts

Ok I didn't reached full install process with Oz, assuming that it do the first install process but it's after rebooting and when finishing the 2nd install process it crash! So I leaved Oz install and go back to clover install, got it, and now fine booting process and finally reached desktop with patched Oz and it's APFS inside BIOS to macOS High Sierra HD, so here's a screenshot:

 

post-334538-0-62447900-1496845261_thumb.png

 

This means that the cecekpawon patched Oz works with this baby, but still finding how to get full install with only OZ stuffs!

 

CECEKPAWON you're THE MAN  :wink_anim:  :hammer:  :thanks_speechbubble:

 

Now i'll reboot and do a 2nd install with only Oz, and I hope if it can be done by changing things in OzmDef, because the FF and FFM even in integer didn't worked!

  • Like 4
Link to comment
Share on other sites

Ok I didn't reached full install process with Oz, assuming that it do the first install process but it's after rebooting and when finishing the 2nd install process it crash! So I leaved Oz install and go back to clover install, got it, and now fine booting process and finally reached desktop with patched Oz and it's APFS inside BIOS to macOS High Sierra HD, so here's a screenshot:

 

attachicon.gifmacOS High Sierra.png

 

This means that the cecekpawon patched Oz works with this baby, but still finding how to get full install with only OZ stuffs!

 

CECEKPAWON you're THE MAN  :wink_anim:  :hammer:  :thanks_speechbubble:

 

Now i'll reboot and do a 2nd install with only Oz, and I hope if it can be done by changing things in OzmDef, because the FF and FFM even in integer didn't worked!

i do same with you,and it works,and i'm working with  full install ,no result,the FirmwareFeatures dose'nt work :(

Link to comment
Share on other sites

Ok I didn't reached full install process with Oz, assuming that it do the first install process but it's after rebooting and when finishing the 2nd install process it crash! So I leaved Oz install and go back to clover install, got it, and now fine booting process and finally reached desktop with patched Oz and it's APFS inside BIOS to macOS High Sierra HD, so here's a screenshot:

 

attachicon.gifmacOS High Sierra.png

 

This means that the cecekpawon patched Oz works with this baby, but still finding how to get full install with only OZ stuffs!

 

CECEKPAWON you're THE MAN  :wink_anim:  :hammer:  :thanks_speechbubble:

 

Now i'll reboot and do a 2nd install with only Oz, and I hope if it can be done by changing things in OzmDef, because the FF and FFM even in integer didn't worked!

Could you link apfs.ffs please? Thanks. I need to integrate it in bios.

Link to comment
Share on other sites

Guys, if you care for the lifetime of your flash chips, don't integrate it. On Macs, it is loaded from HDD, so can change with any update. I don't think APFS is close enough to final yet for the entire driver to be considered just that. Either load it from HDD or be ready to re-flash with every update.

  • Like 1
Link to comment
Share on other sites

Guys, if you care for the lifetime of your flash chips, don't integrate it. On Macs, it is loaded from HDD, so can change with any update. I don't think APFS is close enough to final yet for the entire driver to be considered just that. Either load it from HDD or be ready to re-flash with every update.

Aye

Link to comment
Share on other sites

Any clues? Still getting ACPIPlatform error. Not able to boot the system or usb installer. It may be related to graphics? Tried to boot with HD4600 and GTX 1060 Vesa mode. Not working...yet!

Link to comment
Share on other sites

Ok I didn't reached full install process with Oz, assuming that it do the first install process but it's after rebooting and when finishing the 2nd install process it crash! So I leaved Oz install and go back to clover install, got it, and now fine booting process and finally reached desktop with patched Oz and it's APFS inside BIOS to macOS High Sierra HD, so here's a screenshot:

 

attachicon.gifmacOS High Sierra.png

 

This means that the cecekpawon patched Oz works with this baby, but still finding how to get full install with only OZ stuffs!

 

CECEKPAWON you're THE MAN  :wink_anim:  :hammer:  :thanks_speechbubble:

 

Now i'll reboot and do a 2nd install with only Oz, and I hope if it can be done by changing things in OzmDef, because the FF and FFM even in integer didn't worked!

try with boot-args="-fakesmc-use-nvram"

Link to comment
Share on other sites

The problem here is not APFS in BIOS or in HDD, but reaching out the High Sierra Desktop with only Oz and it's stuffs!

 

Kynyo have you renamed GFX0 with IGPU? Then PEGP to GFX0?

You can do it by clover or DSDT in the USB/ESP!

Because I don't know what's the problem with your rig!

Link to comment
Share on other sites

most eeproms have a life expectancy of at least 100,000 read/write cycles, flashing a few times is negligible in relation to how many times the nvram is rewritten in normal operations.

 

but yeah don't bother to flash apfs yet.

  • Like 1
Link to comment
Share on other sites

Yes but it's just about testing the Oz install process, because it's not stable yet, I've some crashes of iTunes and system preferences!

Link to comment
Share on other sites

Ok but this number is a firmwarefeatures or firmwarefeaturesmask and how can I get the other, that was my question

 

Grabbed from real macs I guess

 

i do same with you,and it works,and i'm working with  full install ,no result,the FirmwareFeatures dose'nt work :(

 

Did you reset your NVRAM after changing the plist? Also changing the board-id as suggested by you doenst work? Here for macpro6: "MP61.88Z.0116.B44.1705011717". The date could be calculated: 05/01/2017 (thanks to @TheRacerMaster).

 

Could you link apfs.ffs please? Thanks. I need to integrate it in bios.

 

From here?

Link to comment
Share on other sites

Grabbed from real macs I guess

 

 

Did you reset your NVRAM after changing the plist? Also changing the board-id as suggested by you doenst work? Here for macpro6: "MP61.88Z.0116.B44.1705011717". The date could be calculated: 05/01/2017 (thanks to @TheRacerMaster).

 

 

From here?

yes,i reset  my nvram,and i fix the biosdate and biosversion

doenst work

Link to comment
Share on other sites

Here the log from @ammoune78 right before calling self updater & crashes:

Jun  7 11:42:41 iMac Unknown[531]: 2017-06-07 11:42:41.192 smcupdater[606:16571] SMC REV  Current version: 1.30f3
Jun  7 11:42:41 iMac Unknown[531]: 2017-06-07 11:42:41.192 smcupdater[606:16571] SMC REV  New     version: 2.22f16
Jun  7 11:42:41 iMac Unknown[531]: 2017-06-07 11:42:41.203 smcupdater[606:16571] SMC RVBF Current version: 1.30f3
Jun  7 11:42:41 iMac Unknown[531]: 2017-06-07 11:42:41.203 smcupdater[606:16571] SMC RVBF New     version: 2.22f16
Jun  7 11:42:41 iMac Unknown[531]: 2017-06-07 11:42:41.203 smcupdater[606:16571] SMC RVUF Current version: 1.30f3
Jun  7 11:42:41 iMac Unknown[531]: 2017-06-07 11:42:41.203 smcupdater[606:16571] SMC RVUF New     version: 2.22f16

My best guess, users need to update their smc revision too "1.30f3" -> "2.22f16"?

Link to comment
Share on other sites

Here the log from @ammoune78 right before calling self updater & crashes:

Jun  7 11:42:41 iMac Unknown[531]: 2017-06-07 11:42:41.192 smcupdater[606:16571] SMC REV  Current version: 1.30f3
Jun  7 11:42:41 iMac Unknown[531]: 2017-06-07 11:42:41.192 smcupdater[606:16571] SMC REV  New     version: 2.22f16
Jun  7 11:42:41 iMac Unknown[531]: 2017-06-07 11:42:41.203 smcupdater[606:16571] SMC RVBF Current version: 1.30f3
Jun  7 11:42:41 iMac Unknown[531]: 2017-06-07 11:42:41.203 smcupdater[606:16571] SMC RVBF New     version: 2.22f16
Jun  7 11:42:41 iMac Unknown[531]: 2017-06-07 11:42:41.203 smcupdater[606:16571] SMC RVUF Current version: 1.30f3
Jun  7 11:42:41 iMac Unknown[531]: 2017-06-07 11:42:41.203 smcupdater[606:16571] SMC RVUF New     version: 2.22f16

My best guess, users need to update their smc revision too "1.30f3" -> "2.22f16"?

i did this too, failed :(
 
that what I get with Clover (r4082)
4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:FirmwareFeaturesMask
------------------------------------------------------------------------------
000000: 3f ff 1f ff                                      |?...|
 
so,with oz, i guess:
 
<key>FirmwareFeatures</key>
<string>0x37F507E9</string>
<key>FirmwareFeaturesMask</key>
<string>0x3FFF1FFF</string>

 

am i right?

and base on clover sources,i guess it should be this:

<key>FirmwareFeatures</key>
<string>0x37F507E9</string>
<key>FirmwareFeaturesMask</key>
<string>0xFFFFFFFF</string>
Link to comment
Share on other sites

 

i did this too, failed :(
 
that what I get with Clover (r4082)
4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:FirmwareFeaturesMask
------------------------------------------------------------------------------
000000: 3f ff 1f ff                                      |?...|
 
so,with oz, i guess:
 
<key>FirmwareFeatures</key>
<string>0x37F507E9</string>
<key>FirmwareFeaturesMask</key>
<string>0x3FFF1FFF</string>

 

am i right?

and base on clover sources,i guess it should be this:

<key>FirmwareFeatures</key>
<string>0x37F507E9</string>
<key>FirmwareFeaturesMask</key>
<string>0xFFFFFFFF</string>

 

 

No not, it should be as INTEGER, like he already said for me:

<key>FirmwareFeatures</key>

<integer>3909612855</integer>

<key>FirmwareFeaturesMask</key>

<integer>4280287039</integer>

 

For you:

<key>FirmwareFeatures</key>

<integer>938805225</integer>

<key>FirmwareFeaturesMask</key>

<integer>1073684479</integer>

 

@cecekpawon

I'm already on the 1.30f3 version but still finished the second install with the same problem without clover, can't get the High Sierra installed!

 

post-334538-0-92332200-1496855441_thumb.png

 

I've tested real Mac FF & FFM and the one posted then same problem.

I need to understand what I'm doing because something is wrong maybe, just for example, if I have this BiosVersion IM151.88Z.0207.B11.1612222107, ProductId Mac-42FD25EABCABB274 and this SystemSerial C02MFIISGDR9, what BiosDate, FirmwareFeatures and FirmwareFeaturesMask should I have?

Edited by ammoune78
Link to comment
Share on other sites

Il292IJ.jpgAll went well for me with the install no issues 290x works great lan and everything but apfs

 

You did an fresh install with Oz only or install with Clover then booting into Desktop with only Oz?

Link to comment
Share on other sites

"1.30f3" -> "2.22f16"?

02220F00 0016
2.22f16

I need to understand what I'm doing because something is wrong maybe

 

Theres no way to get the perfect values except from real mac full dump with exact type & updated, sorry

Link to comment
Share on other sites

 

@Wardoc would share here what dump says?

nvram 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:FirmwareFeatures
nvram 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:FirmwareFeaturesMask

my friend's real macbook with 10.13

post-1428044-0-98444700-1496886472_thumb.jpg

 

UUID 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14

FirmwareFeatures   0x37f507e9

FirmwareFeaturesMask   0x3FFF1FFF
Link to comment
Share on other sites

Ok now, a small report here with my experience:

 

1- When using SmcEmulatorKext work fine but still need update for SMC keys, if I change them by my self I got ACPICPU S**t, but native one can't let you finish install HSierra, otherwise if already installed enjoy it!

2- If I use FakeSMC and it's stuffs I got ACPICPU, BRRRRRRR

3- In the boot log that I uploaded to cecekpawon, I was booting with real Mac SMBios and it's FF & FFM, always same thing as now, it keep crashing because of FF & FFM problem

 

- My conclusion is that the SmcEmulatorKext & it's stuffs needs to be updated

- You have to generate a valid SMBios and it's FF & FFM in OzmosisDefaults

- Also booting with IGPU may solve a 50% the problem, like I did with Clover when installing HSierra

 

If someone can update the SmcEmulatorKext & it's stuffs, he will help everyone who need to install High Sierra 

Link to comment
Share on other sites

×
×
  • Create New...