crusher Posted March 1, 2016 Share Posted March 1, 2016 Is there an Ozmosis success list - Motherboards/ Desktops/ Laptops where people have had success inserting it into the BIOS/ UEFI? For lattpos not but for Desktop you have on Germany forums. Possibe on all UEFI motherboard but you must have a space in ROM. Link to comment Share on other sites More sharing options...
Aigors Posted March 1, 2016 Share Posted March 1, 2016 Is there an Ozmosis success list - Motherboards/ Desktops/ Laptops where people have had success inserting it into the BIOS/ UEFI? The most used mobo are from gigabyte, they have dualbios mechanism and they don't have any security mechanism that avoid to update bios with modified one. Asus need to be updated with crash bios feauture or via bios clip with spi programmer, asrock need spi programmer. These experience are from my daily hobby works Link to comment Share on other sites More sharing options...
dondrog Posted March 3, 2016 Share Posted March 3, 2016 Hello everyone ! I'm starting to learn more about ozmosis, but unfortunately i cannot boot to OS x without the boot_flag = nv_disable =1 . Can someone make take a look defaults.plist for oz_167x and and edit it for my rig ? - attached my clover_config I'm using this rom file for bios B75DS3V_OZ_167X_F9.rom.zip - https://www.hackintosh-forum.de/index.php/Thread/18354-Ozmosis-Mod-f%C3%BCr-B75D3V-Rev-1-2/ without any changes and the default plist from https://www.hackintosh-forum.de/index.php/Board/188-OzmosisDefaults-Vorlagen/- Version 167X-MASS. Right now i'm using clover to boot up, but i want to switch to ozmosis. It's mandatory to fresh install os x when i switch to ozmosis, because i didn't do it, i just tried to boot without clover bootloader. Thank you ! Have a nice day ! config-clover.plist.zip Link to comment Share on other sites More sharing options...
crusher Posted March 3, 2016 Share Posted March 3, 2016 Hello everyone ! I'm starting to learn more about ozmosis, but unfortunately i cannot boot to OS x without the boot_flag = nv_disable =1 . Can someone make take a look defaults.plist for oz_167x and and edit it for my rig ? - attached my clover_config I'm using this rom file for bios B75DS3V_OZ_167X_F9.rom.zip - https://www.hackintosh-forum.de/index.php/Thread/18354-Ozmosis-Mod-f%C3%BCr-B75D3V-Rev-1-2/ without any changes and the default plist from https://www.hackintosh-forum.de/index.php/Board/188-OzmosisDefaults-Vorlagen/- Version 167X-MASS. Right now i'm using clover to boot up, but i want to switch to ozmosis. It's mandatory to fresh install os x when i switch to ozmosis, because i didn't do it, i just tried to boot without clover bootloader. Thank you ! Have a nice day ! Here you go. After install OS X you install NVidia WebDriver and put this Defaults.plist in EFI/Oz and reset NVRAM. B75DS3V.F9-CRU_OZM167X.zip 1 Link to comment Share on other sites More sharing options...
dondrog Posted March 3, 2016 Share Posted March 3, 2016 Thanks crusher for the help. Unfortunately i'm stuck at bios logo. I can only boot with escape(deactivate ozmosis). I found a mistake in the default.plist at the boot args which was making the plist unreadable . Did you insert the plist into rom? Link to comment Share on other sites More sharing options...
crusher Posted March 3, 2016 Share Posted March 3, 2016 Thanks crusher for the help. Unfortunately i'm stuck at bios logo. I can only boot with escape(deactivate ozmosis). I found a mistake in the default.plist at the boot args which was making the plist unreadable . Did you insert the plist into rom? yes i added nv_disable=1 in defaults and in second i added nvda_drv=1. Remove your GPU and connect to IGPU after flash go to settings your bios and after back your GPU inside. Link to comment Share on other sites More sharing options...
dondrog Posted March 3, 2016 Share Posted March 3, 2016 yes i added nv_disable=1 in defaults and in second i added nvda_drv=1. Remove your GPU and connect to IGPU after flash go to settings your bios and after back your GPU inside. But could the defaults.plist in the rom be unreadable(invalid jason format) - because the one you provided me was like this : <dict> <key>boot-args</key> <string>darkwake=0 nvda_drv=1</string> <key>csr-active-config</key> <integer size=32>0x7F</integer> <dict> -> here was the problem instead of </dict> And i think that maybe the one inside the rom while be the same. Could you please check ? Am a newbie in the rom files. Thanks you. Link to comment Share on other sites More sharing options...
crusher Posted March 3, 2016 Share Posted March 3, 2016 nope. this is not problem my defaults is same. I say u where is the problem and how to fix that. Link to comment Share on other sites More sharing options...
dondrog Posted March 3, 2016 Share Posted March 3, 2016 I will give it a shot . Thanks. Link to comment Share on other sites More sharing options...
dondrog Posted March 3, 2016 Share Posted March 3, 2016 I've tried to solution you provide, but it doesn't work. it still stuck at boot on logo with monitor connected to IGSU. Do you have any other tip ? Thanks Link to comment Share on other sites More sharing options...
crusher Posted March 3, 2016 Share Posted March 3, 2016 Give me a real link of your mobo. Link to comment Share on other sites More sharing options...
dondrog Posted March 4, 2016 Share Posted March 4, 2016 http://www.gigabyte.com/products/product-page.aspx?pid=4149#sp - it's the rev 1.0 one. Link to comment Share on other sites More sharing options...
crusher Posted March 4, 2016 Share Posted March 4, 2016 http://www.gigabyte.com/products/product-page.aspx?pid=4149#sp - it's the rev 1.0 one. Here you go. B75D3V.F9-CRU_OZM167X.ROM.zip 1 Link to comment Share on other sites More sharing options...
dondrog Posted March 4, 2016 Share Posted March 4, 2016 It's working and it's booting very fast . the web drivers are working too. I really appreciate your help crusher. Thank you. 1. My sound ins't working so i ask you : do i put the audio kext in the oz folder or can be integrated into bios rom? 2. Whatever i do my bios doesn't save the boot order and the windows boot loader came first into boot , and i boot to osx with F12. Link to comment Share on other sites More sharing options...
crusher Posted March 4, 2016 Share Posted March 4, 2016 It's working and it's booting very fast . the web drivers are working too. I really appreciate your help crusher. Thank you. 1. My sound ins't working so i ask you : do i put the audio kext in the oz folder or can be integrated into bios rom? 2. Whatever i do my bios doesn't save the boot order and the windows boot loader came first into boot , and i boot to osx with F12. No you dont have a space from Audio kext in ROM. Install this kext via kext wizard app and repair premissions and rebuild cache. https://www.dropbox.com/s/abl6riw59duxfgg/Oz-AppleHDA-ALC887.zip?dl=0 Link to comment Share on other sites More sharing options...
dondrog Posted March 4, 2016 Share Posted March 4, 2016 No you dont have a space from Audio kext in ROM. Install this kext via kext wizard app and repair premissions and rebuild cache. https://www.dropbox.com/s/abl6riw59duxfgg/Oz-AppleHDA-ALC887.zip?dl=0 No audio yet. I've tried with the one you provide and with the toleda's script - Realtek ALC AppleHDA Audio Here is the output for bdmesg . Can ozmosis injected a intel default audio ? 00:000 00:000 Ozmosis 1.03.167X-MASS RELEASE (2015-12-24 09:12:07 VS2013x86) on 2016-03-04 09:57:04 00:000 00:000 Found Firmware UEFI Spec :2.31: 00:000 00:000 Found Firmware Vendor :American Megatrends: 00:000 00:000 Found Firmware Revision :4.653: 04:253 04:253 BootOrder 04 03 06 05 04:253 00:000 Found Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz (3A.06.00) Cores 4 Threads 4 04:253 00:000 P-State Coordination Type HW_ALL -> SW_ANY = SW_ANY 04:253 00:000 Bus Ratio 16 - 33 (35) 04:253 00:000 Disabling Invalid Flex-Ratio 90000 -> 80000 = 80000 04:253 00:000 TSC Frequency 3292518180 3292MHz 04:253 00:000 CPU Frequency 3292518174 3292MHz 04:253 00:000 FSB Frequency 99773278 99MHz 04:253 00:000 Found 00.01.00.0 Nvidia Graphics Controller [10DE:1201] [1462:2326] rev 161 04:253 00:000 Found 00.03.00.0 Atheros Lan Controller [1969:1083] [1458:E000] rev 192 00:00:00:00:00:00 04:253 00:000 Found 00.00.1F.3 Intel SMBUS Controller [8086:1E22] [1458:5001] rev 4 04:254 00:000 Slot 0 4096MB DDR3 SDRAM 1333MHz "Geil" "CL9-9-9DDR3-1600" "00000000" 04:255 00:000 Slot 1 2048MB DDR3 SDRAM 1333MHz "Corsair" "CMX4GX3M2A1600C9" "00000000" 04:255 00:000 Slot 2 4096MB DDR3 SDRAM 1333MHz "Geil" "CL9-9-9DDR3-1600" "00000000" 04:256 00:000 Slot 3 2048MB DDR3 SDRAM 1333MHz "Corsair" "CMX4GX3M2A1600C9" "00000000" 04:258 00:002 Found 1 GPU Controller 04:258 00:000 Found Storage PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)/HD(1,GPT,5D77C9EF-2755-4575-B7D4-DDBD16D369BA,0x28,0x64000) 04:264 00:005 Found Defaults \Efi\Oz\Defaults.plist 04:275 00:010 Validated Boot0004 "ElCapitan" 04:275 00:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)/HD(2,GPT,274E7A42-EA52-4B0E-9638-CD507648D086,0x64028,0xDDFAC40)/\System\Library\CoreServices\boot.efi (0x9A) 04:275 00:000 Validated Boot0003 "UEFI: KINGSTON SH103S3120G" 04:275 00:000 HD(1,GPT,5D77C9EF-2755-4575-B7D4-DDBD16D369BA,0x28,0x64000)/\EFI\BOOT\BOOTX64.EFI (0x5E) 04:275 00:000 Validated Boot0006 "UEFI: ST1000DM003-9YN162" 04:275 00:000 HD(4,GPT,22C07FDD-C5CF-46C0-8EB7-5BC976366D9D,0x40B28000,0x33BDE000)/\EFI\BOOT\BOOTX64.EFI (0x5E) 04:275 00:000 Validated Boot0005 "Recovery HD (10.11.0)" 04:275 00:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)/HD(3,GPT,C767D3F2-CFED-4C71-A8C1-96C5610AC4B5,0xDE5EC68,0x135F20)/\com.apple.recovery.boot\boot.efi (0x92) 04:275 00:000 Scanning Bootable Devices... 04:283 00:007 Added Boot0000 "Windows Boot Manager" 04:283 00:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)/HD(1,GPT,5D77C9EF-2755-4575-B7D4-DDBD16D369BA,0x28,0x64000)/\EFI\Microsoft\Boot\bootmgfw.efi (0x90) 04:308 00:024 Matched Boot0004 "ElCapitan" 04:308 00:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)/HD(2,GPT,274E7A42-EA52-4B0E-9638-CD507648D086,0x64028,0xDDFAC40)/\System\Library\CoreServices\boot.efi (0x9A) 04:311 00:002 Matched Boot0005 "Recovery HD (10.11.0)" 04:311 00:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)/HD(3,GPT,C767D3F2-CFED-4C71-A8C1-96C5610AC4B5,0xDE5EC68,0x135F20)/\com.apple.recovery.boot\boot.efi (0x92) 04:379 00:067 Completed Bootable Device Scan 04:379 00:000 BootOrder 00 04 03 06 05 06:524 02:145 StartImage: PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)/HD(2,GPT,274E7A42-EA52-4B0E-9638-CD507648D086,0x64028,0xDDFAC40)/\System\Library\CoreServices\boot.efi 06:525 00:000 Found Current Graphics Mode 2 1024 x 768 06:525 00:000 Setting Graphics Mode 2 1024 x 768 06:541 00:016 Found 1F8E0C02-58A9-4E34-AE22-2B63745FA101:AcpiGeneratorMode 0x45 01000101 Enabled | Darwin | Update Legacy 06:541 00:000 Using AcpiGeneratorMask 0x04 00000100 Darwin 06:544 00:002 Found DMI Anchor 0x000F04C0 v2.7 Table Address 0x000EB450 Length 0x0C68 - Success 06:558 00:014 Updated DMI Anchor 0x000F04C0 v2.7 Table Address 0xDE5EC020 Length 0x0C73 - Success 06:559 00:000 Found 7C436110-AB2A-4BBB-A880-FE41995C9F82:boot-args "darkwake=0 nvda_drv=1" (21) 06:559 00:000 Found LoadedImage->LoadOptions "<null string>" (0) 06:559 00:000 LoadedImage->LoadOptions "slide=0" (16) 06:559 00:000 Found NVIDIA GeForce GTX 560 1024MB NVCE [10DE:1201] SubsystemID [1462:2326] PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) 06:609 00:049 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "@0,AAPL,boot-display" = Data (0) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "@0,can-hot-plug" = Data (0) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "@0,compatible" = "NVDA,NVMac" (10) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "@0,connector-type" = 00 02 00 00 (4) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "@0,device_type" = "display" (7) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "@0,display-cfg" = 03 01 00 00 (4) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "@0,name" = "NVDA,Display-A" (14) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "@1,can-hot-plug" = Data (0) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "@1,compatible" = "NVDA,NVMac" (10) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "@1,connector-type" = 00 02 00 00 (4) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "@1,device_type" = "display" (7) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "@1,display-cfg" = FF FF 00 01 (4) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "@1,name" = "NVDA,Display-B" (14) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "device_type" = "NVDA,Parent" (11) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "AAPL,aux-power-connected" = 01 00 00 00 (4) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "AAPL,backlight-control" = 00 00 00 00 (4) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "AAPL00,Coherency" = 02 00 00 00 (4) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "AAPL00,blackscreen-preferences" = 00 00 00 00 (4) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "AAPL01,blackscreen-preferences" = 00 00 00 00 (4) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "NVCAP" = 04 00 00 00 00 00 07 00 18 00 00 00 00 00 00 07 00 00 00 00 (20) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "NVDA,Features" = FF 16 26 23 (4) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "VRAM,totalMB" = 00 04 00 00 (4) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "VRAM,totalsize" = 00 00 00 40 00 00 00 00 (8) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "model" = "NVIDIA GeForce GTX 560" (22) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "subsystem-id" = 26 23 A1 00 (4) - Success 06:609 00:000 Injected PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) - "rom-revision" = "70.24.21.00.00" (14) - Success 06:609 00:000 Found Intel Panther Point HDA Controller [8086:1E20] PciRoot(0x0)/Pci(0x1B,0x0) 06:609 00:000 Found HDA Codec #2: ALC887 [10EC:0887] Rev 0x03 Stepping 0x02 06:611 00:002 HDA CODEC: 10EC:0887 is not yet supported! 06:612 00:000 Setting DataHub 64517CC8-6561-4051-B03C-5964B60F4C7A:FSBFrequency = 5E 6B F2 05 00 00 00 00 8 bytes - Success 06:612 00:000 Setting DataHub 64517CC8-6561-4051-B03C-5964B60F4C7A:DevicePathsSupported = 01 00 00 00 4 bytes - Success 06:613 00:000 Setting DataHub 64517CC8-6561-4051-B03C-5964B60F4C7A:Model = "MacPro3,1" 18 bytes - Success 06:614 00:000 Setting DataHub 64517CC8-6561-4051-B03C-5964B60F4C7A:SystemSerialNumber = "G8815052XYL" 22 bytes - Success 06:615 00:000 Setting DataHub 64517CC8-6561-4051-B03C-5964B60F4C7A:system-id = 90 02 2B 03 34 04 15 05 FC 06 87 07 00 08 00 09 16 bytes - Success 06:617 00:001 Setting RT+BS 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:MLB = 47 38 38 31 35 30 35 32 58 59 4C 39 30 38 30 37 7E 17 bytes - Success 06:618 00:001 Setting RT+BS 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:ROM = 00 00 00 00 00 00 6 bytes - Success 06:618 00:000 Setting RT+BS 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:BackgroundClear = 00 00 00 00 4 bytes - Success 06:619 00:000 Setting RT+BS 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:FirmwareFeatures = 17 14 00 80 4 bytes - Success 06:619 00:000 Setting RT+BS 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:FirmwareFeaturesMask = 37 FF 03 C0 4 bytes - Success 06:621 00:001 Setting DataHub 64517CC8-6561-4051-B03C-5964B60F4C7A:boot-log 1179648 bytes - Success 06:622 00:000 Setting Firmware Vendor "Apple" 1.10 06:777 00:154 GetDeviceProperties Buffer 0xD1997018 Size 0x4F1 Protocol Size 0x4F1 1 Devices - Success 06:778 00:001 Found BootArgs 0xC4FF6000 Version 0x2 Revision 0x0 06:782 00:004 Found Darwin Kernel Version 15.3.0: Thu Dec 10 18:40:58 PST 2015; root:xnu-3248.30.4~1/RELEASE_X86_64 0xC23EB000 Kernelcache 06:782 00:000 Injected Call __ZN12KLDBootstrap20readBooterExtensionsEv Into __ZN12KLDBootstrap23readPrelinkedExtensionsEP10section_64 06:782 00:000 Ignore result from call __ZN12IOUserClient21copyClientEntitlementEP4taskPKc in __ZN6OSKext14loadExecutableEv 06:784 00:001 Injecting FakeSMC "Driver-2E31000" (0xC501C000) 118644 bytes 06:784 00:000 RSDP 0xDE5D6000 r2 0x0024 0x6F "ALASKA" 0xD1 0xDE5D6028 0x00000000DE5D6070 06:786 00:001 RSDT 0xDE5D6028 r1 0x0044 0xA6 "ALASKA" "A M I " 0x1072009 0x5446534D 0x10013 06:786 00:000 FACP 0xDE5D60E8 r2 0x0084 0xFA "ALASKA" "A M I " 0x1072009 0x20494D41 0x10013 06:786 00:000 FACS 0xDE5F3F40 r0 0x0040 0xA3 " " " " 0x0 0x0 0x0 06:786 00:000 DSDT 0xDE5D6170 r2 0x9B73 0xBB "ALASKA" "A M I " 0x12 0x4C544E49 0x20051117 06:786 00:000 APIC 0xDE5DFDE0 r3 0x0072 0x40 "ALASKA" "A M I " 0x1072009 0x20494D41 0x10013 06:786 00:000 MCFG 0xDE5DFE58 r1 0x003C 0xA9 "ALASKA" "A M I " 0x1072009 0x5446534D 0x97 06:786 00:000 HPET 0xDE5DFE98 r1 0x0038 0xB6 "ALASKA" "A M I " 0x1072009 0x2E494D41 0x5 06:786 00:000 SSDT 0xDE5DFED0 r1 0x036D 0x3C "SataRe" "SataTabl" 0x1000 0x4C544E49 0x20091112 06:786 00:000 SSDT 0xDE5E0240 r1 0x09AA 0x27 "PmRef " "Cpu0Ist " 0x3000 0x4C544E49 0x20051117 06:786 00:000 SSDT 0xDE5E0BF0 r1 0x0A92 0x69 "PmRef " "CpuPm " 0x3000 0x4C544E49 0x20051117 06:786 00:000 BGRT 0xDE5E1688 r0 0x0038 0x38 "ALASKA" "A M I " 0x1072009 0x20494D41 0x10013 06:786 00:000 XSDT 0xDE5D6070 r1 0x0064 0x27 "ALASKA" "A M I " 0x1072009 0x20494D41 0x10013 06:786 00:000 FACP 0xDE5DFCE8 r4 0x00F4 0xCA "ALASKA" "A M I " 0x1072009 0x20494D41 0x10013 06:786 00:000 FACS 0xDE5F3F80 r0 0x0040 0xA1 " " " " 0x0 0x0 0x2 06:786 00:000 DSDT 0xDE5D6170 r2 0x9B73 0xBB "ALASKA" "A M I " 0x12 0x4C544E49 0x20051117 06:786 00:000 APIC 0xDE5DFDE0 r3 0x0072 0x40 "ALASKA" "A M I " 0x1072009 0x20494D41 0x10013 06:786 00:000 MCFG 0xDE5DFE58 r1 0x003C 0xA9 "ALASKA" "A M I " 0x1072009 0x5446534D 0x97 06:786 00:000 HPET 0xDE5DFE98 r1 0x0038 0xB6 "ALASKA" "A M I " 0x1072009 0x2E494D41 0x5 06:786 00:000 SSDT 0xDE5DFED0 r1 0x036D 0x3C "SataRe" "SataTabl" 0x1000 0x4C544E49 0x20091112 06:786 00:000 SSDT 0xDE5E0240 r1 0x09AA 0x27 "PmRef " "Cpu0Ist " 0x3000 0x4C544E49 0x20051117 06:786 00:000 SSDT 0xDE5E0BF0 r1 0x0A92 0x69 "PmRef " "CpuPm " 0x3000 0x4C544E49 0x20051117 06:786 00:000 BGRT 0xDE5E1688 r0 0x0038 0x38 "ALASKA" "A M I " 0x1072009 0x20494D41 0x10013 06:787 00:000 Shrinking Kernel Memory Map 0x19B0 (137) -> 0x6C0 (36) 06:788 00:000 Found BootArgs 0xC4FF6000 Version 0x2 Revision 0x0 06:788 00:000 CommandLine "slide=0 darkwake=0 nvda_drv=1 kext-dev-mode=1" 06:788 00:000 EfiMode 0x40 (64) DebugMode 0x0 Flags 0x49 01001001 (RebootOnPanic | CSRActiveConfig | BlackTheme) 06:788 00:000 MemoryMap 0x0088C6000 Size 0x000006C0 DescSize 0x00000030 Version 01 06:788 00:000 Video Info Base 0x0F1000000 Width 1024 Height 768 Depth 32 RowBytes 0x1000 Display 1 (Graphics) 06:788 00:000 Kernel Address 0x000100000 Length 0x087C8000 06:788 00:000 EfiRuntimeServices 0x000002F31 Pages 0x00005995 VirtualPageStart 0x000FFFFFF8002F31 06:788 00:000 EfiSystemTable 0x002F31000 06:788 00:000 PerformanceData 0x000000000 Size 0x00000000 06:788 00:000 KeyStoreData 0x000000000 Size 0x00000000 06:788 00:000 BootMem 0x000000000 Size 0x00000000 06:788 00:000 PhysicalMemorySize 0x300000000 (12288 MB) 06:788 00:000 FSBFrequency 0x005F26B5E (99 MHz) 06:788 00:000 DeviceTree 0x002E0F000 Length 0x000012C4 06:788 00:000 PciConfigSpace Base 0x0F8000000 StartBus 0x0 EndBus 0x3F 06:788 00:000 CsrActiveConfig 0x6F 01101111 (UntrustedKexts | UnrestrictedFs | TaskForPid | KernelDebugger | UnrestrictedDTrace | UnrestrictedNVRAM) 06:788 00:000 CsrCapabilities 0x0 00000000 ( ) 06:788 00:000 boot_SMC_plimit 0x0 06:788 00:000 bootProgressMeter Start 0 End 0 06:788 00:000 MemMap 0xCAAB1000 MemMapSize 0x000006C0 DescriptorSize 0x00000030 DescriptorVersion 01 06:788 00:000 ++ Physical Range Virtual Start Pages Attributes Type 06:788 00:000 01 0x0000000000-0x000009EFFF 0x0000000000000000 0x000009F 0x000000000000000F BS_code 06:788 00:000 02 0x000009F000-0x000009FFFF 0x0000000000000000 0x0000001 0x0000000000000000 ACPI_NVS 06:788 00:000 03 0x0000100000-0x00C21E9FFF 0x0000000000000000 0x00C20EA 0x000000000000000F available 06:788 00:000 04 0x00C21EA000-0x00C21EAFFF 0x0000000000000000 0x0000001 0x000000000000000F LoaderCode 06:788 00:000 05 0x00C21EB000-0x00CDB73FFF 0x0000000000000000 0x000B989 0x000000000000000F BS_data 06:788 00:000 06 0x00CDB74000-0x00CDD47FFF 0x0000000000000000 0x00001D4 0x000000000000000F LoaderCode 06:788 00:000 07 0x00CDD48000-0x00DE05DFFF 0x0000000000000000 0x0010316 0x000000000000000F available 06:788 00:000 08 0x00DE05E000-0x00DE05EFFF 0xFFFFFF8002F31000 0x0000001 0x000000000000000F ACPI_NVS 06:788 00:000 09 0x00DE05F000-0x00DE2C5FFF 0x0000000000000000 0x0000267 0x000000000000000F BS_code 06:788 00:000 10 0x00DE2C6000-0x00DE32DFFF 0x0000000000000000 0x0000068 0x000000000000000F reserved 06:788 00:000 11 0x00DE32E000-0x00DE4D0FFF 0x0000000000000000 0x00001A3 0x000000000000000F reserved 06:788 00:000 12 0x00DE4D1000-0x00DE4D1FFF 0x0000000000000000 0x0000001 0x000000000000000F ACPI_recl 06:788 00:000 13 0x00DE4D2000-0x00DE548FFF 0x0000000000000000 0x0000077 0x000000000000000F ACPI_NVS 06:788 00:000 14 0x00DE549000-0x00DE5E6FFF 0x0000000000000000 0x000009E 0x000000000000000F ACPI_NVS 06:788 00:000 15 0x00DE5E7000-0x00DE5EBFFF 0x0000000000000000 0x0000005 0x000000000000000F ACPI_NVS 06:788 00:000 16 0x00DE5EC000-0x00DE5F4FFF 0x0000000000000000 0x0000009 0x000000000000000F ACPI_NVS 06:788 00:000 17 0x00DE5F5000-0x00DE9EAFFF 0xFFFFFF8002F32000 0x00003F6 0x800000000000000F MemMapIO 06:788 00:000 18 0x00DE9EB000-0x00DEB57FFF 0xFFFFFF8003328000 0x000016D 0x800000000000000F MemMapIO 06:788 00:000 19 0x00DEB58000-0x00DEB59FFF 0xFFFFFF8003495000 0x0000002 0x800000000000000F MemMapIO 06:788 00:000 20 0x00DEB5A000-0x00DEB90FFF 0xFFFFFF8003497000 0x0000037 0x800000000000000F MemMapIO 06:788 00:000 21 0x00DEB91000-0x00DEB92FFF 0xFFFFFF80034CE000 0x0000002 0x800000000000000F MemMapIO 06:788 00:000 22 0x00DEB93000-0x00DEC0FFFF 0xFFFFFF80034D0000 0x000007D 0x800000000000000F MemMapIO 06:788 00:000 23 0x00DEC10000-0x00DEC2FFFF 0xFFFFFF800354D000 0x0000020 0x000000000000000F ACPI_NVS 06:788 00:000 24 0x00DEC30000-0x00DECB1FFF 0xFFFFFF800356D000 0x0000082 0x000000000000000F ACPI_NVS 06:788 00:000 25 0x00DECB2000-0x00DECB2FFF 0x0000000000000000 0x0000001 0x000000000000000F BS_data 06:788 00:000 26 0x00DECB3000-0x00DECF5FFF 0x0000000000000000 0x0000043 0x000000000000000F ACPI_NVS 06:788 00:000 27 0x00DECF6000-0x00DF51AFFF 0x0000000000000000 0x0000825 0x000000000000000F BS_data 06:789 00:000 28 0x00DF51B000-0x00DF7DBFFF 0xFFFFFF80035EF000 0x00002C1 0x800000000000000F MemMapIO 06:789 00:000 29 0x00DF7DC000-0x00DF7FFFFF 0x0000000000000000 0x0000024 0x000000000000000F BS_data 06:789 00:000 30 0x00F8000000-0x00FBFFFFFF 0xFFFFFF80038B0000 0x0004000 0x8000000000000001 MemMapIO 06:789 00:000 31 0x00FEC00000-0x00FEC00FFF 0xFFFFFF80078B0000 0x0000001 0x8000000000000001 MemMapIO 06:789 00:000 32 0x00FED00000-0x00FED03FFF 0xFFFFFF80078B1000 0x0000004 0x8000000000000001 MemMapIO 06:789 00:000 33 0x00FED1C000-0x00FED1FFFF 0xFFFFFF80078B5000 0x0000004 0x8000000000000001 MemMapIO 06:789 00:000 34 0x00FEE00000-0x00FEE00FFF 0xFFFFFF80078B9000 0x0000001 0x8000000000000001 MemMapIO 06:789 00:000 35 0x00FF000000-0x00FFFFFFFF 0xFFFFFF80078BA000 0x0001000 0x8000000000000001 MemMapIO 06:789 00:000 36 0x0100000000-0x031DFFFFFF 0x0000000000000000 0x021E000 0x000000000000000F available Link to comment Share on other sites More sharing options...
crusher Posted March 4, 2016 Share Posted March 4, 2016 lol use and disable SIP with 0x67 or 0x7F this is your probelm. here is my 03:461 00:000 Found Intel Wildcat Point HDA Controller [8086:8CA0] PciRoot(0x0)/Pci(0x1B,0x0) 03:461 00:000 Found HDA Codec #2: ALC887 [10EC:0887] Rev 0x03 Stepping 0x02 03:463 00:002 HDA CODEC: 10EC:0887 is not yet supported! and this is yours 06:609 00:000 Found Intel Panther Point HDA Controller [8086:1E20] PciRoot(0x0)/Pci(0x1B,0x0) 06:609 00:000 Found HDA Codec #2: ALC887 [10EC:0887] Rev 0x03 Stepping 0x02 06:611 00:002 HDA CODEC: 10EC:0887 is not yet supported! Link to comment Share on other sites More sharing options...
dondrog Posted March 4, 2016 Share Posted March 4, 2016 Still no sound . I disabled SIP and reinstall audio, repair permission, rebuild cache. Link to comment Share on other sites More sharing options...
xpamamadeus Posted March 4, 2016 Author Share Posted March 4, 2016 No you dont have a space from Audio kext in ROM. Install this kext via kext wizard app and repair premissions and rebuild cache. https://www.dropbox.com/s/abl6riw59duxfgg/Oz-AppleHDA-ALC887.zip?dl=0 Hi. This bios can gain much more free space by compressing coredxe. Link to comment Share on other sites More sharing options...
crusher Posted March 4, 2016 Share Posted March 4, 2016 Hi. This bios can gain much more free space by compressing coredxe. where are you man I dont see you very,very long time. I know for compress CORE_DXE and I dont need every time from compress. and welcome back!!!!! Link to comment Share on other sites More sharing options...
xpamamadeus Posted March 4, 2016 Author Share Posted March 4, 2016 where are you man I dont see you very,very long time. I know for compress CORE_DXE and I dont need every time from compress. and welcome back!!!!! Thx! I am very busy at work,and dont have much time for myself and IM community. Now i dont have my macmini anymore soo i come back to see how u guys going with oz and going to make some hack again with ozmosis. Link to comment Share on other sites More sharing options...
crashnburn_in Posted March 4, 2016 Share Posted March 4, 2016 The most used mobo are from gigabyte, they have dualbios mechanism and they don't have any security mechanism that avoid to update bios with modified one. Asus need to be updated with crash bios feauture or via bios clip with spi programmer, asrock need spi programmer. These experience are from my daily hobby works Any Gigabyte/ ASUS laptops that had success? Link to comment Share on other sites More sharing options...
Aigors Posted March 8, 2016 Share Posted March 8, 2016 Hi friends, as far you know can i install Mavericks with MSI Gtx 989 with last ozmosis into Asrock z87 extrem4 tb4? I followed a friend that told me to use nvd_disable to install Mavericks, after installation complete i revert the setting into Defaults.plist to nvda_drv=1 but the system start and reboot restart and reboot and so on without working.My procedure was Hardware Mobo Asrock Z87 extreme4 tb4 Bios last version with ozmosis 167X CPU Xeon E3 -1220 V3 Smbios Imac 14,2 I put bootflag nv_disable=1 into Deafaults.plist into bios, start and ending installation, ok Install WebDriver,Put setting nvda_drv=1 into Defaults.plist into bios Continuosly reboot Any hints? Many thanks Link to comment Share on other sites More sharing options...
dondrog Posted March 9, 2016 Share Posted March 9, 2016 Hi friends, as far you know can i install Mavericks with MSI Gtx 989 with last ozmosis into Asrock z87 extrem4 tb4? I followed a friend that told me to use nvd_disable to install Mavericks, after installation complete i revert the setting into Defaults.plist to nvda_drv=1 but the system start and reboot restart and reboot and so on without working. My procedure was Hardware Mobo Asrock Z87 extreme4 tb4 Bios last version with ozmosis 167X CPU Xeon E3 -1220 V3 Smbios Imac 14,2 I put bootflag nv_disable=1 into Deafaults.plist into bios, start and ending installation, ok Install WebDriver,Put setting nvda_drv=1 into Defaults.plist into bios Continuosly reboot Any hints? Many thanks Did you reset nvram after setting the nvda_drv=1 into plist? if not do it. Link to comment Share on other sites More sharing options...
crusher Posted March 9, 2016 Share Posted March 9, 2016 Did you reset nvram after setting the nvda_drv=1 into plist? if not do it. yup you must reset nvram!!!! Link to comment Share on other sites More sharing options...
Recommended Posts