ammoune78 Posted December 26, 2014 Share Posted December 26, 2014 Hi Pavo, I've just flashed the Bios with all ozmosis stuff with enought free space, but it doesn't see the OS X partition, maybe it will not work with and without FileSystem.ffs. Link to comment Share on other sites More sharing options...
Pavo Posted December 26, 2014 Share Posted December 26, 2014 I have never tried a laptop BIOS, sorry Link to comment Share on other sites More sharing options...
ammoune78 Posted December 26, 2014 Share Posted December 26, 2014 Cool thank's Link to comment Share on other sites More sharing options...
pmcnano Posted December 26, 2014 Share Posted December 26, 2014 AFAIK, that would be the HFS filesystem, nothing more. Did you compress it? Try not compressing it? Link to comment Share on other sites More sharing options...
ammoune78 Posted December 26, 2014 Share Posted December 26, 2014 I didn't find any HfsFileSystem.ffs Inside this ProBook Bios, maybe it's name is Fat But here's i Bios file: Link to comment Share on other sites More sharing options...
pmcnano Posted December 26, 2014 Share Posted December 26, 2014 Lol? The hfs IS part of the ozmosis files Link to comment Share on other sites More sharing options...
ammoune78 Posted December 26, 2014 Share Posted December 26, 2014 Ah ok, but i'm talking about the FileSystem.ffs that i need to delete from the original Bios Image it's attached. Ok i've found it, it's name is Fat.ffs; i'll try and rebort, but please PRAY WITH ME . Link to comment Share on other sites More sharing options...
MattsCreative Posted December 28, 2014 Share Posted December 28, 2014 i have a few issues that need fixing: my cpu is being held back a ton it's the i7 3770 i have it overclocked galore but sadly it's not showing it's real power and when i add a ssdt it get's even worse Link to comment Share on other sites More sharing options...
StoneTemplePilots Posted December 29, 2014 Share Posted December 29, 2014 i have a few issues that need fixing: my cpu is being held back a ton it's the i7 3770 i have it overclocked galore but sadly it's not showing it's real power and when i add a ssdt it get's even worse clocked at 800 mhz? I have the same CPU and I had similar trouble. My perfectly fixed SSDT > https://www.sendspace.com/file/mrthl2 Link to comment Share on other sites More sharing options...
magnifico Posted December 29, 2014 Share Posted December 29, 2014 Good Mornig @Pavo Please if i want to use my DSDT coustomize...where add this dsdt? In wich folder? Thanks Link to comment Share on other sites More sharing options...
J1mmyS Posted December 29, 2014 Share Posted December 29, 2014 Good Mornig @Pavo Please if i want to use my DSDT coustomize...where add this dsdt? In wich folder? Thanks Copy yout DSDT to the folder EFI/Oz/Acpi/Load in EFI system partition. Link to comment Share on other sites More sharing options...
magnifico Posted December 30, 2014 Share Posted December 30, 2014 Copy yout DSDT to the folder EFI/Oz/Acpi/Load in EFI system partition. Ok thank you Link to comment Share on other sites More sharing options...
jacoweb Posted December 30, 2014 Share Posted December 30, 2014 any news for x79 systems? Link to comment Share on other sites More sharing options...
MattsCreative Posted January 2, 2015 Share Posted January 2, 2015 clocked at 800 mhz? I have the same CPU and I had similar trouble. My perfectly fixed SSDT > https://www.sendspace.com/file/mrthl2 no thanks i fixed it with my own ssdt my turbo was wrong now it's set to 6300 Link to comment Share on other sites More sharing options...
bunbury Posted January 3, 2015 Share Posted January 3, 2015 Hi there, I have a Quo board. Flashed it with the latest H3C. I can't get the multidisplay to work. I tried with two monitors on the same card, with two cards (one ATI, one Nvidia, just in case) No luck The bios logo is displayed on both screens, the apple Logo is displayed on both screens but just before the login screen the second screen is switched off and only the main one is used. No double display option in the preferences. Any hint ? Thanks Link to comment Share on other sites More sharing options...
joe75 Posted January 4, 2015 Share Posted January 4, 2015 For the radeon cards if you see apple logo and then its not started you will have to try different frame buffer names or different controller patching. Link to comment Share on other sites More sharing options...
thedubiousdubber Posted January 5, 2015 Share Posted January 5, 2015 Curious if anyone has run into similar problem as me. I've had some minor hardware issues with my computer which may be part of the cause, but I'm finding multiple, partitions I suppose, showing up in the boot list. When I initially installed, I had Windows boot, Mac, Recovery and Shell. At some point it grew to 2 or 3 shell prompts, and eventually another mac prompt and recovery prompt. Now when I hold F12 to select boot device I have a list of like 10 different things, most of which are redundant. Not sure why this is happening. I went with Ozmosis as it's supposed to be the most vanilla way of putting OS X on a hack, but I'm finding it far more difficult to maintain than Clover ever was. Link to comment Share on other sites More sharing options...
MacUser2525 Posted January 5, 2015 Share Posted January 5, 2015 Curious if anyone has run into similar problem as me. I've had some minor hardware issues with my computer which may be part of the cause, but I'm finding multiple, partitions I suppose, showing up in the boot list. When I initially installed, I had Windows boot, Mac, Recovery and Shell. At some point it grew to 2 or 3 shell prompts, and eventually another mac prompt and recovery prompt. Now when I hold F12 to select boot device I have a list of like 10 different things, most of which are redundant. Not sure why this is happening. I went with Ozmosis as it's supposed to be the most vanilla way of putting OS X on a hack, but I'm finding it far more difficult to maintain than Clover ever was. Ozmosis bug it adds them entries you can reset it with the four key Command + Option + p + r combination to clear the pram. If you want to do it manually then choose the last shell in the list at the F12 to enter the shell once there bcfg boot dump gives you the listing of them, bcfg rm ? will remove the number you used for the ? in my example. Leave the last shell entry as it is the only one that is real in my experience. Link to comment Share on other sites More sharing options...
who_s_there Posted January 5, 2015 Share Posted January 5, 2015 Hi there, I have a Quo board. Flashed it with the latest H3C. I can't get the multidisplay to work. I tried with two monitors on the same card, with two cards (one ATI, one Nvidia, just in case) No luck The bios logo is displayed on both screens, the apple Logo is displayed on both screens but just before the login screen the second screen is switched off and only the main one is used. No double display option in the preferences. Any hint ? Thanks Hi, I had a similar issue with my Radeon 5770 I went for the RadeonFramefuffer using sudo nvram 1F8E0C02-58A9-4E34-AE22-2B63745FA101:AtiFramebuffer=RadeonFramebuffer and I got my 2 monitors up & running If it does not help, try the others framebuffers Stef Link to comment Share on other sites More sharing options...
CrazyCreator Posted January 5, 2015 Share Posted January 5, 2015 their two with the radeon 5770 ... i have the same card (original mac edition), but i have a other question. can you see the right number in System Information? i see in system profiler only this: but my card it is 5770 ... 100% Link to comment Share on other sites More sharing options...
thedubiousdubber Posted January 5, 2015 Share Posted January 5, 2015 Ozmosis bug it adds them entries you can reset it with the four key Command + Option + p + r combination to clear the pram. If you want to do it manually then choose the last shell in the list at the F12 to enter the shell once there bcfg boot dump gives you the listing of them, bcfg rm ? will remove the number you used for the ? in my example. Leave the last shell entry as it is the only one that is real in my experience. Thanks. I'll have to give the shell command a try. Unless I'm incorrect, clearing PRAM would also clear the NVRAM, meaning I would have to set my ROM, MLB, etc. all over again. Link to comment Share on other sites More sharing options...
MacUser2525 Posted January 5, 2015 Share Posted January 5, 2015 Thanks. I'll have to give the shell command a try. Unless I'm incorrect, clearing PRAM would also clear the NVRAM, meaning I would have to set my ROM, MLB, etc. all over again. Yes that is correct do it manually from the shell to keep them variables set to what you have now. Link to comment Share on other sites More sharing options...
thedubiousdubber Posted January 5, 2015 Share Posted January 5, 2015 Yes that is correct do it manually from the shell to keep them variables set to what you have now. If I were to place these values in Default.plist and place in Efi/Oz folder, then I could clear PRAM without having to reset values correct? I'm using Oz bios from hackintosh-forum.de. It works well, but not sure if there is a default.plist already included in bios. There's a generic MacPro3,1 and serial, etc that is included in bios, but not sure if that is generic across Oz firmwares or whether it is from whoever compiled it and put on the forum I downloaded it from. I'd like to get my defaults set and eventually incorporate them into the bios myself, but I'm still new to Ozmosis, so one step at a time. I was also curious about using rEFInd as a way of easily selecting boot drive at startup. Currently using F12 and the gigabyte boot selection. I've read part of the rEFInd website and understand it works a little differently with Yosemite. Anyone here using it successfully? Any tips tricks, etc? Link to comment Share on other sites More sharing options...
modbin Posted January 5, 2015 Share Posted January 5, 2015 If I were to place these values in Default.plist and place in Efi/Oz folder, then I could clear PRAM without having to reset values correct? That's correct. And the Defaults.plist on ESP has priority over the one in the firmware. Link to comment Share on other sites More sharing options...
Riley Freeman Posted January 5, 2015 Share Posted January 5, 2015 To stop the entries re-appearing you can remove the HermitShell module from your BIOS. It's not something I tended to use here so I can manage without it. I'm sure the bug has already been fixed and won't occur whenever we get the next Oz release. 1 Link to comment Share on other sites More sharing options...
Recommended Posts