Ozmosis

[Aigors]

 

Friends. I have a problem in time to insert the files. "FFS". 

 

When I inserted them, all is well. But it seems that the "space" ends! Giving error and not allow me to add the rest of the files. 

 

I did everything. Compress the "Coredxe" and replacing it by compressed. Liberated space, leaving more than 1 MB. During that would inserted files, I checked the remaining space, until it gave error and saw that I was "0" space. 

 

Could anyone help me modify my Bios? 

 

These are my files that I want to insert: Arquivos FFS.zip

 

And here the current Bios on my motherboard (Gigabyte GA-B75M-D3H  Revision 1.0): mb_bios_ga-b75m-d3h_f15.exe.zip

 

This I thank you.

 

Attached there is your bios with all your modules and all OROM update 

USE AT YOUR OWN RISK! 

B75MD3H-OROM-UPD-OZMO-894.zip

[JorgeMax]

there are several unrequired modules, they don't need to be inserted,

the minimum you need for ozmosis is:

 

CsmVideoDxe-64.ffs (< 29CF55F8-B675-4F5D-8F2F-B87A3ECFD063)

EmuVariableUefi-64.ffs

enhancedfat.ffs (< replaces the filesystem module)

extfs.ffs (< do you use linux? use grub)

FakeSMCCompress.ffs

FSInject-64.ffs

hermitshell.ffs

hfsplus.ffs

NTFS(clover).ffs

OsxAptioFixDrv-64.ffs (< aptiofix is already active in ozmosis, no need to insert it as a module)

OsxFatBinaryDrv-64.ffs (< same as enhancedfat?)

ozmosis.ffs

ozmosisdefaults.ffs

ozmosistheme.ffs (< big file, not needed)

partitiondxe.ffs (< only reqired for Snow Leopard afaik)

Friend. I do not use Linux. Then just put the ones that you have not deleted? After this process is usually only update the Bios? 

 

Thanks for the tips and explanations.

[Aigors]

Thanks Truesosldier, but i already have DSDT my two problema are:

1) edit to fix errors ( and to be honest, i dont know ) 

2) reinsert into AmiboardInfo 

 

For fisrt problem, i have to read and try, for secondo problem, i dont know, i'm afraid of reinsert fixed dsdt as is into AmiboardInfo can brick my mobo, for my past experience,flashback bios for asus doesent work very well with bricked mobo and i cant reprogram bios, it's' soldered and it's' hard to remove.

I have to use this method because copy DSDT into /Efi/Quo/Acpi/load does not permit to load DSDT from disk instead from bios.

 

Friend. I do not use Linux. Then just put the ones that you have not deleted? After this process is usually only update the Bios? 

 

Thanks for the tips and explanations.

 

Here is it, only ozmosis needed stuff 

B75MD3HOZMO894-OROM-UPDATED.zip

[JorgeMax]

Here is it, only ozmosis needed stuff 

Friend worked. But when will enter the table / desktop stays with black screen. How do I enable my video card? During initialization, the resolution is not correct with my monior that is 1600 x 900. 

I use the HDMI port. 

 

I tried booting from Clover, and gives kernel panic! 

After this process is necessary to reinstall OS X?

[bs0d]

Hi All, can anyone confirm if runtime services work in os x with any Z87 or Z97 boards.

 

thanks.

[Aigors]

 

Friend worked. But when will enter the table / desktop stays with black screen. How do I enable my video card? During initialization, the resolution is not correct with my monior that is 1600 x 900. 

I use the HDMI port. 

 

I tried booting from Clover, and gives kernel panic! 

After this process is necessary to reinstall OS X?

 

No it's' not necessary

Have you your own DSDT? if yes, you have to  copy your own DSDT in /Efi/Quo/Acpi/Load so OSX can load it instead of bios DSDT, or you can read first post in thread and put DSDT directly into biso, it'e' easy to do it 

[JorgeMax]

No it's' not necessary

Have you your own DSDT? if yes, you have to  copy your own DSDT in /Efi/Quo/Acpi/Load so OSX can load it instead of bios DSDT, or you can read first post in thread and put DSDT directly into biso, it'e' easy to do it 

Friend, but as I get in OS X? I tried different ways to boot and nothing. It seems that the Bootloader Ozmosis not identify my video card. 

 

This path "/ Efi / Quo / Acpi / Load", is where? EFI partition? There is already installed Clover. 

 

I can not access the system. Not trying to boot the OS X installer will. Gives kernel panic.

[Aigors]

can you boot with -x flag? 

reset your pc, press f8 to choice which kind of OS you want boot, select this os and press left windows key on windows keyborad +x or command+x on apple keyboard + enter to boot os, in this way tou boot in safe mode, and maybe you can reach desktop to move DSDT in rigth place 

[JorgeMax]

can you boot with -x flag? 

reset your pc, press f8 to choice which kind of OS you want boot, select this os and press left windows key on windows keyborad +x or command+x on apple keyboard + enter to boot os, in this way tou boot in safe mode, and maybe you can reach desktop to move DSDT in rigth place 

Friend did not work. I press the "Windows + X" button, also enters the black screen. The display is flashing with light. Indicating that no video signal. 

 

I tried booting with the onboard graphics of the Core i3 (HD2500) and give it kernel panics. 

 

If I put back the normal BIOS, I have a problem?

[Aigors]

No, you can return back to your original bios, when you have a fully functional desktop, try to integrate your edited dsdt into ozmosis bios and try.

I dont know but i remember that ozmosis works only in x77 chipset, but i ask to forum's gurus 

[JorgeMax]

No, you can return back to your original bios, when you have a fully functional desktop, try to integrate your edited dsdt into ozmosis bios and try.

I dont know but i remember that ozmosis works only in x77 chipset, but i ask to forum's gurus 

Ok friend. Thank you for your availability.

[Aigors]

You are welcome, if you want, in the name of hacking try my method ( put DSDT into bios, reflash and try ) 

[ammoune78]

Thanks Truesosldier, but i already have DSDT my two problema are:

1) edit to fix errors ( and to be honest, i dont know ) 

2) reinsert into AmiboardInfo 

 

For fisrt problem, i have to read and try, for secondo problem, i dont know, i'm afraid of reinsert fixed dsdt as is into AmiboardInfo can brick my mobo, for my past experience,flashback bios for asus doesent work very well with bricked mobo and i cant reprogram bios, it's' soldered and it's' hard to remove.

I have to use this method because copy DSDT into /Efi/Quo/Acpi/load does not permit to load DSDT from disk instead from bios.

Here is it, only ozmosis needed stuff 

 

Hi Aigors!

Try this DSDT, i've already added your Broadcom BCM4352 in RP04=>PSXS, and i've just fix error's and some remarks, and added: Device: GIGE, HDEF, BCM4352 etc....

Here it is:   DSDT.aml.zip

[FredWst]

NVRAM Reset after restart.

 

Hi nvramsmi is not lock in Z77DS3H.12a,  OSX can't write nvram.

 

 

Fred

[JorgeMax]

You are welcome, if you want, in the name of hacking try my method ( put DSDT into bios, reflash and try ) 

Thanks friend. I went back to the original BIOS of my board. Is everything OK with OS X and Windows. 

 

The funny thing is, my video card is activated by Clover (Grafics Injector) Use framebuffer "Dashimaki" and in my DSDT is patched for AMD Radeon 7000 series. But with Bootloader Ozmosis, it does not recognize my video card. That was the only problem for me. I do not know how to activate the card with this method of booting the OS X. 

 

If you want to see my DSDT, here: DSDT.aml.zip

[truemac]

Hi nvramsmi is not lock in Z77DS3H.12a, OSX can't write nvram.

 

Z77DS3H.12a.jpg

 

Fred

Hi

Also it is Osx mistake?

[Aigors]

Hi Aigors!

Try this DSDT, i've already added your Broadcom BCM4352 in RP04=>PSXS, and i've just fix error's and some remarks, and added: Device: GIGE, HDEF, BCM4352 etc....

Here it is:   DSDT.aml.zip

Hi ammoune thanks for editing, but with your DSDT put it on /Efi/Quo/Acpi/load my system cant boot it stop on acpi load and nothing happens now i had to delete disk to restart installation because cant be possbile boot in any way 

Hi nvramsmi is not lock in Z77DS3H.12a,  OSX can't write nvram.

 

Z77DS3H.12a.jpg

 

Fred

Hi fred, via amibcp can bed possibile show all bios options? if yes, how? 

Many thanks 

[XLR]

What version of AMIBCP are you using?

Version 4.55.0070 crashes instantly when trying to save a file...

[Aigors]

What version of AMIBCP are you using?

Version 4.55.0070 crashes instantly when trying to save a file...

Version that you mentioned, but when i save rom it does'nt crash but for what i saw all options menu are setup to show and for access/use to default.

As you can see in image, the first items dmni configuration have no options but below you can se the same item with same number with options can you change

[PJALM©]

Would someone be so kind as to unlock nvram in mine too please? I can't figure this out at all.

 

http://dlcdnet.asus.com/pub/ASUS/mb/LGA1150/MAXIMUS-VI-GENE/MAXIMUS-VI-GENE-ASUS-1505.zip

[XLR]

Would someone be so kind as to unlock nvram in mine too please? I can't figure this out at all.

 

http://dlcdnet.asus.com/pub/ASUS/mb/LGA1150/MAXIMUS-VI-GENE/MAXIMUS-VI-GENE-ASUS-1505.zip

Here you go: https://www.sendspace.com/file/ilb5ml

 

Looks like it works with Asus bioses but crashes on save with Gigabyte bioses.

[PJALM©]

thx for trying but all it did was brick the system and kill flashback even, gonna hav to pull the chip and reflash manually now. Wonder why?
ok looks like its that new 1505 rom, even the orig don't work so i will try 1402 which is what i had

ok that did not work either, def the patch thats bricking it, oh well

 

is it possible this patch only works on ivy not haswell?

[Aigors]

Hi ammoune, thanks for your work,using your dsdt the system stop to boot on acpi loading band noithing hapoens

[StoneTemplePilots]

thx for trying but all it did was brick the system and kill flashback even, gonna hav to pull the chip and reflash manually now. Wonder why?

ok looks like its that new 1505 rom, even the orig don't work so i will try 1402 which is what i had

 

ok that did not work either, def the patch thats bricking it, oh well

 

is it possible this patch only works on ivy not haswell?

I hope you didn't flash the capsule at sendspace file as it has an overhead you need to cut.

I'm not wondering your board doesnt boot anymore. sounds like you've overwritten the bootblock

with the capsule header

never flash a capsule!! the rsa signature is already broken as you edit a cap file.

 

extract the intel image instead:

 

[Aigors]

I hope you didn't flash the capsule at sendspace file as it has an overhead you need to cut.

I'm not wondering your board doesnt boot anymore. sounds like you've overwritten the bootblock

with the capsule header

never flash a capsule!! the rsa signature is already broken as you edit a cap file.

 

extract the intel image instead:

 

capsule.png

Let my understand, as you say me, i have to unlock bios with scewin, after this, i have to extract bios from ami capsule and use it with ftp it' right?