Thunderbolt Posted April 12, 2014 Share Posted April 12, 2014 Easy answer,u cannot do that! Ah alright , is it due to that Award BIOS that is won't work ? or is it due to the AMD ? And what was the Awardtool thing you told me about ? what would that have achieve ? Link to comment Share on other sites More sharing options...
xpamamadeus Posted April 12, 2014 Author Share Posted April 12, 2014 Ah alright , is it due to that Award BIOS that is won't work ? or is it due to the AMD ? And what was the Awardtool thing you told me about ? what would that have achieve ? Its becouse u dont have UEFI bios but award hybrid bios. Awardtool can put your modded dsdt to firmware soo u dont need it on hdd,only that. Link to comment Share on other sites More sharing options...
Thunderbolt Posted April 12, 2014 Share Posted April 12, 2014 Its becouse u dont have UEFI bios but award hybrid bios. Awardtool can put your modded dsdt to firmware soo u dont need it on hdd,only that. Alright that would be ok. So should I flash it ? Link to comment Share on other sites More sharing options...
xpamamadeus Posted April 12, 2014 Author Share Posted April 12, 2014 what changes u make to dsdt file ? are u sure that u edited dsdt ok? Did u test this file with some bootloader? Why u even wanna do that? We do this becouse we must,but for u that dont have any meaning. Link to comment Share on other sites More sharing options...
Thunderbolt Posted April 12, 2014 Share Posted April 12, 2014 what changes u make to dsdt file ? are u sure that u edited dsdt ok? Did u test this file with some bootloader? Why u even wanna do that? We do this becouse we must,but for u that dont have any meaning. Well I have not edited the dsdt as I don't know how to. Nor I have tested it with any boot loader But I can try with Clover as it is already installed on that system. Well if it is not needed than i can yes skip it. and when I get a board which has a UEFI capable bios then i can use it. Link to comment Share on other sites More sharing options...
xpamamadeus Posted April 12, 2014 Author Share Posted April 12, 2014 Well I have not edited the dsdt as I don't know how to. Nor I have tested it with any boot loader But I can try with Clover as it is already installed on that system. Well if it is not needed than i can yes skip it. and when I get a board which has a UEFI capable bios then i can use it. U cannot use dsdt from one board on another board. better to just use clover and leave everything like it is since it work. Link to comment Share on other sites More sharing options...
Thunderbolt Posted April 12, 2014 Share Posted April 12, 2014 U cannot use dsdt from one board on another board. better to just use clover and leave everything like it is since it work. Yes i have done just that. thanks. Link to comment Share on other sites More sharing options...
nik247d Posted April 12, 2014 Share Posted April 12, 2014 HI xpamamadeus Can you make a bios ozmosis for a laptop toshba satelite L830-16G? Link to comment Share on other sites More sharing options...
xpamamadeus Posted April 12, 2014 Author Share Posted April 12, 2014 HI xpamamadeus Can you make a bios ozmosis for a laptop toshba satelite L830-16G? Hi. Upload your bios here. Its inside bios as i see and can be modded using CodeRush UEFITool. I never see someone that have ozmosis and Inside bios. I try to mod inside bios and all went ok. u must know that u are responsible if u brick your laptop becouze i dont know how can u flash original if this dont work. Link to comment Share on other sites More sharing options...
ammoune78 Posted April 13, 2014 Share Posted April 13, 2014 Can you send me you bios and new dsdt to integrate ? i must check for other bios. Fred Hi FredWst! Can i send you mine? I will test it and report ! Link to comment Share on other sites More sharing options...
FredWst Posted April 13, 2014 Share Posted April 13, 2014 Hi FredWst! Can i send you mine? I will test it and report ! Yes of course. I will release today soft, src, how to. Fred it gives something like this Patching header --------------- SizeOfInitializedData a2a0 -> a8f0 SizeOfImage ab20 -> b170 DataDirectory ab00 -> b150 Patching sections ----------------- Name .data PhysicalAddress a19e -> a7ee SizeOfRawData a1a0 -> a7f0 Name VirtualAddress aae0 -> b130 PointerToRawData aae0 -> b130 Name .reloc VirtualAddress ab00 -> b150 PointerToRawData ab00 -> b150 Patching relocations -------------------- Table index 1 a000 -> b000 Table index 2 a9b8 -> a008 Table index 3 aa20 -> a070 Table index 4 aa28 -> a078 Patching adr in code -------------------- mov rax, qword ptr [rip + 0xa770] -> [adc0] lea r9, qword ptr [rip + 0xa723] -> [ad73] lea r8, qword ptr [rip + 0xa714] -> [ad64] lea rdx, qword ptr [rip + 0xa185] -> [a7d5] mov rdx, qword ptr [rip + 0xa6f8] -> [ad48] mov rcx, qword ptr [rip + 0xa6e9] -> [ad39] mov rdx, qword ptr [rip + 0xa6cc] -> [ad1c] mov rcx, qword ptr [rip + 0xa69f] -> [acef] mov rcx, qword ptr [rip + 0xa629] -> [ac79] mov rdx, qword ptr [rip + 0xa61d] -> [ac6d] mov rcx, qword ptr [rip + 0xa5a0] -> [abf0] mov rdx, qword ptr [rip + 0xa59a] -> [abea] lea rcx, qword ptr [rip + 0xa561] -> [abb1] mov rax, qword ptr [rip + 0xa563] -> [abb3] cmp qword ptr [rip + 0xa53c], 0 -> [ab8c] mov qword ptr [rip + 0xa533], rdx -> [ab83] mov qword ptr [rip + 0xa530], rax -> [ab80] mov qword ptr [rip + 0xa535], rcx -> [ab85] mov qword ptr [rip + 0xa526], rax -> [ab76] mov rax, qword ptr [rip + 0xa4f1] -> [ab41] lea rdx, qword ptr [rip + 0xa4b7] -> [ab07] mov rax, qword ptr [rip + 0xa4bc] -> [ab0c] lea rdx, qword ptr [rip + 0x9f14] -> [a564] mov rax, qword ptr [rip + 0xa42a] -> [aa7a] AmiBoardInfo.bin has been created 2 Link to comment Share on other sites More sharing options...
ammoune78 Posted April 13, 2014 Share Posted April 13, 2014 Yes of course. I will release today soft, src, how to. Fred it gives something like this Patching header --------------- SizeOfInitializedData a2a0 -> a8f0 SizeOfImage ab20 -> b170 DataDirectory ab00 -> b150 Patching sections ----------------- Name .data PhysicalAddress a19e -> a7ee SizeOfRawData a1a0 -> a7f0 Name VirtualAddress aae0 -> b130 PointerToRawData aae0 -> b130 Name .reloc VirtualAddress ab00 -> b150 PointerToRawData ab00 -> b150 Patching relocations -------------------- Table index 1 a000 -> b000 Table index 2 a9b8 -> a008 Table index 3 aa20 -> a070 Table index 4 aa28 -> a078 Patching adr in code -------------------- mov rax, qword ptr [rip + 0xa770] -> [adc0] lea r9, qword ptr [rip + 0xa723] -> [ad73] lea r8, qword ptr [rip + 0xa714] -> [ad64] lea rdx, qword ptr [rip + 0xa185] -> [a7d5] mov rdx, qword ptr [rip + 0xa6f8] -> [ad48] mov rcx, qword ptr [rip + 0xa6e9] -> [ad39] mov rdx, qword ptr [rip + 0xa6cc] -> [ad1c] mov rcx, qword ptr [rip + 0xa69f] -> [acef] mov rcx, qword ptr [rip + 0xa629] -> [ac79] mov rdx, qword ptr [rip + 0xa61d] -> [ac6d] mov rcx, qword ptr [rip + 0xa5a0] -> [abf0] mov rdx, qword ptr [rip + 0xa59a] -> [abea] lea rcx, qword ptr [rip + 0xa561] -> [abb1] mov rax, qword ptr [rip + 0xa563] -> [abb3] cmp qword ptr [rip + 0xa53c], 0 -> [ab8c] mov qword ptr [rip + 0xa533], rdx -> [ab83] mov qword ptr [rip + 0xa530], rax -> [ab80] mov qword ptr [rip + 0xa535], rcx -> [ab85] mov qword ptr [rip + 0xa526], rax -> [ab76] mov rax, qword ptr [rip + 0xa4f1] -> [ab41] lea rdx, qword ptr [rip + 0xa4b7] -> [ab07] mov rax, qword ptr [rip + 0xa4bc] -> [ab0c] lea rdx, qword ptr [rip + 0x9f14] -> [a564] mov rax, qword ptr [rip + 0xa42a] -> [aa7a] AmiBoardInfo.bin has been created Ok here's the Link Link to comment Share on other sites More sharing options...
FredWst Posted April 13, 2014 Share Posted April 13, 2014 Hello, Here is source file and release build. Removed don't use if already download https://www.dropbox.com/s/pzrgy7muxef5n27/Dsdt2Bios-r2.zip https://www.dropbox.com/s/lz89np9jxh8k345/Dsdt2Bios-r3.zip minor fixe. Terminal. https://www.dropbox.com/s/oltaz3zc4c998um/Dsdt2Bios-r4.zip Gui. https://www.dropbox.com/s/zknsh2gk43g0bzi/Gui-Dsdt2Bios-r04.zip Minor bug fixe and cosmetic https://www.dropbox.com/s/iseat8ewk50yidf/Dsdt2Bios-r0.4.1.zip debug trace https://www.dropbox.com/s/kw7bixs5e95tj6d/Dsdt2Bios-r0.4.2.zip limited size of AmiBoardInfo to 0xFFFF because not tested https://www.dropbox.com/s/6rz69aear3kgr14/Dsdt2Bios-r0.4.3.zip Project src. https://www.dropbox.com/s/kdpm2e9yq5b9ph9/Src-Dsdt2Bios-r0.4.3.zip https://www.dropbox.com/s/lrdv5j10pacfu41/Src-Dsdt2Bios-r0.4.10.zip https://www.dropbox.com/s/ipeod3u7tpsz90v/Src-Dsdt2Bios-r0.4.11.zip Compiled with capstone engine, so file is bigger. https://www.dropbox.com/s/roxwxtthjd4mn8u/Dsdt2Bios-r0.4.4.zip Minor bug fixe when checking headers. https://www.dropbox.com/s/idszglyuk0p1wis/Dsdt2Bios-r0.4.5.zip Add possibility to extract DSDT just by dragging AmiBoardInfo. https://www.dropbox.com/s/r5evxwsgqx2gipk/Dsdt2Bios-r0.4.6.zip Remove because master bug discover by Riley Freeman, reloc table not correct according to your bios, should be fixe soon. One section in bios is unknown to me ".ROM" with this version you will not be able to patched if this section is detected in file. https://www.dropbox.com/s/955i9kul1digmro/Dsdt2Bios-r0.4.10.zip Limited Dsdt size removed. (0xFFFF -> 0x3FFFF) https://www.dropbox.com/s/2t8h81h3bluihd4/Dsdt2Bios-r0.4.11.zip Dsdt2Bios use capstone engine, you need first to install package you will find here http://www.capstone-engine.org/download.html Core engine for Mac OSX - x86_64 binaries DMG NOTE: This is necessary for all bindings & also for C programming. This DMG installer contains: README & license file. The Capstone header files (*.h) for C programming. 64-bit dylib & static libraries for Mac OSX x86_64. How to First you need to extract AmiBoardInfo from your bios with Coderush UEFITools. Second use Dsdt2Bios to generate AmiBoardInfo.bin, replace with UEFITools in bios file. Save file and it is ready to Flash. Fred 3 Link to comment Share on other sites More sharing options...
Aigors Posted April 13, 2014 Share Posted April 13, 2014 GOOD JOB! as i promise,you have a payed beer Link to comment Share on other sites More sharing options...
Panas78 Posted April 13, 2014 Share Posted April 13, 2014 Hello, Here is source file and release build. https://www.dropbox.com/s/pzrgy7muxef5n27/Dsdt2Bios-r2.zip Dsdt2Bios use capstone engine, you need first to install package you will find here http://www.capstone-engine.org/download.html Core engine for Mac OSX - x86_64 binaries DMG NOTE: This is necessary for all bindings & also for C programming. This DMG installer contains: README & license file. The Capstone header files (*.h) for C programming. 64-bit dylib & static libraries for Mac OSX x86_64. How to First you need to extract AmiBoardInfo from your bios with Coderush UEFITools. Second use Dsdt2Bios to include your new DSDT. Save file and your ready to Flash. Fred Hello Fred, link on dropbox does not work. also check out screenshots. PS. you are the man :-) Link to comment Share on other sites More sharing options...
FredWst Posted April 13, 2014 Share Posted April 13, 2014 Ok here's the Link https://www.dropbox.com/s/mnb4ainlik292c7/AmiBoardInfo.bin.zip for your Z87. Fred 1 Link to comment Share on other sites More sharing options...
Aigors Posted April 13, 2014 Share Posted April 13, 2014 Hello, Here is source file and release build. Removed don't use if already download https://www.dropbox.com/s/pzrgy7muxef5n27/Dsdt2Bios-r2.zip https://www.dropbox.com/s/lz89np9jxh8k345/Dsdt2Bios-r3.zip Dsdt2Bios use capstone engine, you need first to install package you will find here http://www.capstone-engine.org/download.html Core engine for Mac OSX - x86_64 binaries DMG NOTE: This is necessary for all bindings & also for C programming. This DMG installer contains: README & license file. The Capstone header files (*.h) for C programming. 64-bit dylib & static libraries for Mac OSX x86_64. How to First you need to extract AmiBoardInfo from your bios with Coderush UEFITools. Second use Dsdt2Bios to include your new DSDT. Save file and your ready to Flash. Fred Hi fred, maybe you are trapped in my some error with dropbox images, when you attach some jpg image on forum, you have to use original dropbox links and not short dropbox links , i dont know why but insanelymac dont like short dropbox links Link to comment Share on other sites More sharing options...
xpamamadeus Posted April 13, 2014 Author Share Posted April 13, 2014 Hello, Here is source file and release build. Removed don't use if already download https://www.dropbox.com/s/pzrgy7muxef5n27/Dsdt2Bios-r2.zip https://www.dropbox.com/s/lz89np9jxh8k345/Dsdt2Bios-r3.zip Dsdt2Bios use capstone engine, you need first to install package you will find here http://www.capstone-engine.org/download.html Core engine for Mac OSX - x86_64 binaries DMG NOTE: This is necessary for all bindings & also for C programming. This DMG installer contains: README & license file. The Capstone header files (*.h) for C programming. 64-bit dylib & static libraries for Mac OSX x86_64. How to First you need to extract AmiBoardInfo from your bios with Coderush UEFITools. Second use Dsdt2Bios to include your new DSDT. Save file and your ready to Flash. Fred Hi fred I try your DsdttoBios - r2 with this file from Z87M D3H F10a bios amiboardinfo.zip and it gives me error. EDIT:Same error with r3 version. miljenkos-mac:~ miljenko$ /Users/miljenko/Desktop/Dsdt2Bios-r2/Release/Dsdt2Bios -extract /Users/miljenko/Desktop/amiboardinfo.ffs dsdt.aml /Users/miljenko/Desktop/amiboardinfo.ffs has bad header Link to comment Share on other sites More sharing options...
FredWst Posted April 13, 2014 Share Posted April 13, 2014 Hi fred I try your DsdttoBios - r2 with this file from Z87M D3H F10a bios amiboardinfo.zip and it gives me error. EDIT:Same error with r3 version. miljenkos-mac:~ miljenko$ /Users/miljenko/Desktop/Dsdt2Bios-r2/Release/Dsdt2Bios -extract /Users/miljenko/Desktop/amiboardinfo.ffs dsdt.aml /Users/miljenko/Desktop/amiboardinfo.ffs has bad header You need to extract with UEFITool to get body file. Fred Link to comment Share on other sites More sharing options...
xpamamadeus Posted April 13, 2014 Author Share Posted April 13, 2014 You need to extract with UEFITool to get body file. Fred Same error happens. Here its bios if u wanna try http://www.mediafire.com/download/u559b7bo489lw19/Z87MD3H.10a.zip Link to comment Share on other sites More sharing options...
FredWst Posted April 13, 2014 Share Posted April 13, 2014 Same error happens. Here its bios if u wanna try http://www.mediafire.com/download/u559b7bo489lw19/Z87MD3H.10a.zip You do something wrong. AmiBoardInfo-xpamamadeus.new.zip Fred I'll try to make my first native graphics app with drag and drop. It will will be more easy. Fred 3 Link to comment Share on other sites More sharing options...
xpamamadeus Posted April 13, 2014 Author Share Posted April 13, 2014 my bios https://mega.co.nz/#fm not a working link Link to comment Share on other sites More sharing options...
nik247d Posted April 13, 2014 Share Posted April 13, 2014 i m sorry,it okay nowhttps://mega.co.nz/#!hgQUzb7Y!9wg5VQZJNOlwhRIRYT5zdr0Iso4GdrVRjpBWKFpgvdo Link to comment Share on other sites More sharing options...
xpamamadeus Posted April 13, 2014 Author Share Posted April 13, 2014 You do something wrong. AmiBoardInfo-xpamamadeus.new.zip help-1.JPG Fred I'll try to make my first native graphics app with drag and drop. It will will be more easy. Fred Working like a charm. i m sorry,it okay nowhttps://mega.co.nz/#!hgQUzb7Y!9wg5VQZJNOlwhRIRYT5zdr0Iso4GdrVRjpBWKFpgvdo here u go. Plz report how it goes. Replaced fat module with enhancedfat. Added ozmois files and ozmosidefaults with macbookpro 8,2 smbios. PMPatched. nik247ozmosis.fd.zip EDIT:I make another one with DSDT patched for HD3000 and ALC269 edits. nik247ozmosis_DSDT.fd.zip Link to comment Share on other sites More sharing options...
Aigors Posted April 13, 2014 Share Posted April 13, 2014 I have to report a success with as rock H77M-ITX bios with integrated DSDT.aml patched from palm repo Fred you are a Fu**** Genius Link to comment Share on other sites More sharing options...
Recommended Posts