Jump to content

Ozmosis

xpamamadeus

By xpamamadeus,
in Ozmosis

 Share
6,231 posts in this topic

Recommended Posts

truemac
truemac
Posted
Posted

Hi! 

I don't know witch one of them to delete, but that i will need to use, is only the front panel USB Port's. And i don't use the TPM, so i don't know if i can delete it also, and i think the PCI-Express port 1 and 2 witch are in DSDT ( P0PA and P0PB) can be deleted also if i don't use the SLI "2 Graphics Cards"?  :unsure: 

delete EC device :yes:

Link to comment
Share on other sites
ammoune78
ammoune78
Posted
Posted

Thanks truesoldier for a fast reply!

Ok! I see, in my board he's named Device (H_EC), but when i delete it, it generate more errors like that:

 

post-334538-0-24345000-1396375576_thumb.png     post-334538-0-22986200-1396375601_thumb.png

Link to comment
Share on other sites
xpamamadeus
xpamamadeus
Posted
  • Author
Posted

Thanks truesoldier for a fast reply!

Ok! I see, in my board he's named Device (H_EC), but when i delete it, it generate more errors like that:

 

attachicon.gifDeleting Device H_EC.png     attachicon.gifErrors.png

u can look at my bios  dsdt https://www.dropbox.com/s/ypplrra9p4xfuku/Z87MD3H%20F10a%20Ozmosis.zip

it wass almost same as yours.

i deleted all of _SB.PCI0.RP01 to _SB.PCI0.RP08

After that use maciasl and Toleda 8 series cleanup.

Apply toleda has1-dsdt-ami-8_series_hdmi_audio-1_v3.0 from patch 4. to 7.0

"# 4. Insert device GFX0 and device HDAU into device PEGP (Nvidia/AMD HDMI audio)

# 5. Insert HDMI audio injection into device IGPU (HD5K HDMI audio - Part 1/2)
# 6. Add device HDAU (HD5K HDMI audio - Part 2/2)
# 7. Insert audio injection into device HDEF (HDEF audio)"
and all work great in windows and OSX.
U can play with other patches for this board but i have experienced some problems on windows side when using patches like " # 2. Rename GFX0 devices to IGPU 
# 3. Rename device P0P2 to device PEGP"
all was working but wass having some red icon on "Microsoft ACPI-Compliant System"
Link to comment
Share on other sites
ammoune78
ammoune78
Posted
Posted

upload your DSDT here please

Ok Thanks! Here is the link for a DSDT that was Extracted from AmiBoardInfo as: "As Is" and "Uncompressed", because i don't know witch one to use!

The Uncompressed has small size than the As Is.

https://www.dropbox.com/sh/i1bcwqu8731io1b/SJbVIOVF7H

Link to comment
Share on other sites
ammoune78
ammoune78
Posted
Posted

 

u can look at my bios  dsdt https://www.dropbox.com/s/ypplrra9p4xfuku/Z87MD3H%20F10a%20Ozmosis.zip

it wass almost same as yours.

i deleted all of _SB.PCI0.RP01 to _SB.PCI0.RP08

After that use maciasl and Toleda 8 series cleanup.

Apply toleda has1-dsdt-ami-8_series_hdmi_audio-1_v3.0 from patch 4. to 7.0

"# 4. Insert device GFX0 and device HDAU into device PEGP (Nvidia/AMD HDMI audio)

# 5. Insert HDMI audio injection into device IGPU (HD5K HDMI audio - Part 1/2)
# 6. Add device HDAU (HD5K HDMI audio - Part 2/2)
# 7. Insert audio injection into device HDEF (HDEF audio)"
and all work great in windows and OSX.
U can play with other patches for this board but i have experienced some problems on windows side when using patches like " # 2. Rename GFX0 devices to IGPU 
# 3. Rename device P0P2 to device PEGP"
all was working but wass having some red icon on "Microsoft ACPI-Compliant System"

 

Thank's xpamamadeus for reply!

So i will try these patches and i will come back, but for graphics, i think the P0P2 is PEG0, P0P2_GFX0 is PEGP, P0PA is PEG1, P0PB is PEG2 and IGPU is GFX0. When i look in the SSDT-4 i see in Scope PCI0: 1-PEG0, 1,2-PEGP, 2-PEG1, 3-PEG2 and 4-GFX0 in this order in my motherboard, and i have looked into yours and it's the same. My graphics now with the "PEG0 with PEGP", PEG1, PEG2 and "GFX0 for Integrated Graphics Processor Unit (IGPU)" work like charm.

Link to comment
Share on other sites
Aigors
Aigors
Posted
Posted

 

u can look at my bios  dsdt https://www.dropbox.com/s/ypplrra9p4xfuku/Z87MD3H%20F10a%20Ozmosis.zip

it wass almost same as yours.

i deleted all of _SB.PCI0.RP01 to _SB.PCI0.RP08

After that use maciasl and Toleda 8 series cleanup.

Apply toleda has1-dsdt-ami-8_series_hdmi_audio-1_v3.0 from patch 4. to 7.0

"# 4. Insert device GFX0 and device HDAU into device PEGP (Nvidia/AMD HDMI audio)

# 5. Insert HDMI audio injection into device IGPU (HD5K HDMI audio - Part 1/2)
# 6. Add device HDAU (HD5K HDMI audio - Part 2/2)
# 7. Insert audio injection into device HDEF (HDEF audio)"
and all work great in windows and OSX.
U can play with other patches for this board but i have experienced some problems on windows side when using patches like " # 2. Rename GFX0 devices to IGPU 
# 3. Rename device P0P2 to device PEGP"
all was working but wass having some red icon on "Microsoft ACPI-Compliant System"

 

Hi, i downloaded your bios, start to look inside i'v notice that there is'nt DisablerKext and InjectorKext, is there some specific issue or other because you dont insert those two kexts? 

Many thanks for any answer

Link to comment
Share on other sites
ammoune78
ammoune78
Posted
Posted

here it is https://www.mediafire.com/?gdmrk5vv90q9axy

test first!

 

Good luck :)

:hammer: !!! :drool:  :drool:
 
You :king:  :king:  :king:  are amazingly, awesomely and respectively genius, i swear, it's really work like charm! Thank you truesoldier! I tested it in windows and mavericks and it work's perfectly. 
And please I don't want to disturb you, please, there is much more space, and if you can add one more patch: it's Method Darwin, HDEF 898, GLAN I217-V, PEG0, NGR, PEG1, PGE2, it's a patch allready for use, you will manually adjust a little change only in the methods Darwin and Windows 2013, there is a message on the top of the patch file. I'm and i would be very grateful. Thank you for all!!! :thanks_speechbubble:

Patch.txt

  • Like 1
Link to comment
Share on other sites
xpamamadeus
xpamamadeus
Posted
  • Author
Posted

Hi, i downloaded your bios, start to look inside i'v notice that there is'nt DisablerKext and InjectorKext, is there some specific issue or other because you dont insert those two kexts? 

Many thanks for any answer

These are for snow leopard.

I dont use SL soo i dont insert them.

I need only fakesmc

  • Like 1
Link to comment
Share on other sites
truemac
truemac
Posted
Posted

 

:hammer: !!! :drool:  :drool:
 
You :king:  :king:  :king:  are amazingly, awesomely and respectively a of the genius, i swear, it's really work like charm! Thank you truesoldier! I tested it in windows and mavericks and it work's perfectly. 
And please I don't want to disturb you, please, there is much more space, and if you can add one more patch: it's Method Darwin, HDEF 898, GLAN I217-V, PEG0, NGR, PEG1, PGE2, it's a patch allready for use, you will manually adjust a little change only in the methods Darwin and Windows 2013, there is a message on the top of the patch file. I'm and i would be very grateful. Thank you for all!!! :thanks_speechbubble:

 

 You're welcome ^_^

https://www.mediafire.com/?tzeg4dpu0001gax

  • Like 1
Link to comment
Share on other sites
ammoune78
ammoune78
Posted
Posted

 

truesoldier, I don't know what to say, the words can't explain it! But thank you, again. What to say when since one month i was struggling to integrate the DSDT perfectly! And you came to do it in a few minutes! Thank you very much and i wish you all the most of the best!  :thanks_speechbubble:

  • Like 1
Link to comment
Share on other sites
truemac
truemac
Posted
Posted

truesoldier, I don't know what to say, the words can't explain it! But thank you, again. What to say when since one month i was struggling to integrate the DSDT perfectly! And you came to do it in a few minutes! Thank you very much and i wish you all the most of the best!  :thanks_speechbubble:

Don't mention it ;)

 

Can u try make DSDT for me to try.

I see u have diferent patches than me.

Wanna test your patches.

https://www.mediafire.com/?u559b7bo489lw19

Thx.

hi Xpamamadeus

No Problem ^_^ here: http://www.mediafire.com/download/7o7ahgqnbpv28c3/Patched+Bios%2BDSDT%2BAMIBoardInfo.zip

Link to comment
Share on other sites
ammoune78
ammoune78
Posted
Posted

Hi friend

 

just remove TZ device to get more space.

 

Hi friends! Here is my two systems all running without any issue!!! Gift from truesoldier  :yes:  :yes:  :yes:

After a full format of the two systems, my pc takes his breath to run both without any problems. So I'll play games on mavericks to know if its really works.

 

 

post-334538-0-22769500-1396570964_thumb.png

post-334538-0-80966400-1396570977_thumb.png

post-334538-0-70303800-1396570994_thumb.png

post-334538-0-86140100-1396571223_thumb.png

  • Like 1
Link to comment
Share on other sites
xpamamadeus
xpamamadeus
Posted
  • Author
Posted

just remove TZ device to get more space.

Thx for V2.

System CMOS error gone but other one still exist.

If i use DSDT that u make for ammoune78 there are no errors.

Can u try to fix mine and add IGPU injection for my HD 4600 ?

Link to comment
Share on other sites
xpamamadeus
xpamamadeus
Posted
  • Author
Posted

now it should work well.  :)

 

good luck :thumbsup_anim:

Thx very very much!

now this work great,only think that dont work now its HD 4600 HDMI Audio.

 

I try to add HDAU device that u didnt put into DSDT but i fail.

Can u help me with this last one?

My work looks like this but it seems wrong since it does not work...

            Device (IGPU)
            {
                Name (_ADR, 0x00020000)
                Method (_DSM, 4, NotSerialized)
                {
                    Store (Package (0x0A)
                        {
                            "name", 
                            "display", 
                            "AAPL,slot-name", 
                            "Built In", 
                            "AAPL,ig-platform-id", 
                            Buffer (0x04)
                            {
                                0x00, 0x00, 0x26, 0x0C
                            }, 

                            "subsystem-vendor-id", 
                            Buffer (0x04)
                            {
                                0x6B, 0x10, 0x00, 0x00
                            }, 

                            "hda-gfx", 
                            Buffer (0x0A)
                            {
                                "onboard-1"
                            }
                        }, Local0)
                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                    Return (Local0)
                }
            }

            Device (HDAU)
            {
                Name (_ADR, 0x00030000)
                Method (_DSM, 4, NotSerialized)
                {
                    Store (Package (0x02)
                        {
                            "hda-gfx", 
                            Buffer (0x0A)
                            {
                                "onboard-1"
                            }
                        }, Local0)
                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                    Return (Local0)
                }
            }
Link to comment
Share on other sites
ammoune78
ammoune78
Posted
Posted

Thx very very much!


now this work great,only think that dont work now its HD 4600 HDMI Audio.
 
I try to add HDAU device that u didnt put into DSDT but i fail.
Can u help me with this last one?
My work looks like this but it seems wrong since it does not work...

            Device (IGPU)
            {
                Name (_ADR, 0x00020000)
                Method (_DSM, 4, NotSerialized)
                {
                    Store (Package (0x0A)
                        {
                            "name", 
                            "display", 
                            "AAPL,slot-name", 
                            "Built In", 
                            "AAPL,ig-platform-id", 
                            Buffer (0x04)
                            {
                                0x00, 0x00, 0x26, 0x0C
                            }, 

                            "subsystem-vendor-id", 
                            Buffer (0x04)
                            {
                                0x6B, 0x10, 0x00, 0x00
                            }, 

                            "hda-gfx", 
                            Buffer (0x0A)
                            {
                                "onboard-1"
                            }
                        }, Local0)
                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                    Return (Local0)
                }
            }

            Device (HDAU)
            {
                Name (_ADR, 0x00030000)
                Method (_DSM, 4, NotSerialized)
                {
                    Store (Package (0x02)
                        {
                            "hda-gfx", 
                            Buffer (0x0A)
                            {
                                "onboard-1"
                            }
                        }, Local0)
                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                    Return (Local0)
                }
            }
Hi xpamamadeus! Try one of the two patches, but i think the second one would be better to use!

Patch Device GFX0.txt

Device GFX0 Intel HD 4600.rtf

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...