Panas78 Posted March 16, 2014 Share Posted March 16, 2014 Yes working fine with Bios F10h. FakeSmc kozlek does not work, you must use one made by Slice. (Rev 3.3.1) Fred Can you share fakesmc ffs and sensor plugins ? Link to comment Share on other sites More sharing options...
xpamamadeus Posted March 16, 2014 Author Share Posted March 16, 2014 Can you share fakesmc ffs and sensor plugins ? http://www.projectosx.com/forum/index.php?showtopic=2585 and use kexttoffs Well its a no go for the NVRAM patch as the asus mobos don't have that NvramSmi.ffs module CodeRush speaks of. The problem with that is you still have to pay $100+ for windows and why would some pay that for something they would never use? uff thats so OT. Can u share boards models u try and what bios versions ? Link to comment Share on other sites More sharing options...
Riley Freeman Posted March 16, 2014 Share Posted March 16, 2014 Well its a no go for the NVRAM patch as the asus mobos don't have that NvramSmi.ffs module CodeRush speaks of. It's there, but doesn't have a name. On my P9X79 PRO board it's the un-named module under CryptoDxe. The GUID for it is 842A454A-75E5-408B-8B1C-36420E4E3F21. I tried the patch last night with Clover but after applying the patch, booting into OS X via Clover and disabling EmuVariableUefi-64.efi I couldn't boot OS X any more. And Chameleon hung at a blinking underscore. So I rolled back to the unpatched BIOS and it worked again. Ozmosis works great on my Z68 (well, apart from the latest one) but has never worked on my P9X79. It must be conflicting with something. Clover is doing fine now, especially as EmuVariableUefi-64.efi allows me to have working nvram via a plist. Link to comment Share on other sites More sharing options...
PJALM© Posted March 16, 2014 Share Posted March 16, 2014 Well the Ozmosis seems to be working except the default didn't take for some reason, its stil shows as a mac pro 3,1. Had to use an older version of ozmosis though so not sure if thats why, the latest one simply won't turn on my PC. Boards tested were the ASUS Maximus VI Gene, Formula and Impact. I have attached my OzmosisDefaults.plist maybe I edited it wrong. Link to comment Share on other sites More sharing options...
Riley Freeman Posted March 16, 2014 Share Posted March 16, 2014 Only the latest Ozmosis reads it's defaults from that file. For older ones you have to set up the SMBIOS via NVRAM. Link to comment Share on other sites More sharing options...
xpamamadeus Posted March 16, 2014 Author Share Posted March 16, 2014 Well the Ozmosis seems to be working except the default didn't take for some reason, its stil shows as a mac pro 3,1. Had to use an older version of ozmosis though so not sure if thats why, the latest one simply won't turn on my PC. Boards tested were the ASUS Maximus VI Gene, Formula and Impact. I have attached my OzmosisDefaults.plist maybe I edited it wrong. defaults seems to be just fine. have u try older bios versions that maybe dont have nvram issues or u just try latest version? Link to comment Share on other sites More sharing options...
PJALM© Posted March 16, 2014 Share Posted March 16, 2014 There are no BIOS versions for these mobos with writable NVRAM in osx I'll have to try the newest version of Ozmossis again and see, maybe I did something wrong unless one of you are willing to atempt to make it for me. Link to comment Share on other sites More sharing options...
PJALM© Posted March 16, 2014 Share Posted March 16, 2014 Ok I managed to get my PC to turn on now with latest version but when booting OSX I allways get a KP saying something about a kext summary, I guess it can't find any kexts to load now. Link to comment Share on other sites More sharing options...
baerhund Posted March 16, 2014 Share Posted March 16, 2014 Try it without fakesmc sensor plugins or try to put another version of fakesmc into the bios Link to comment Share on other sites More sharing options...
FredWst Posted March 16, 2014 Share Posted March 16, 2014 If you're using Kozlec FakeSmc last version it will not work. Try Slice FakeSmc 3.3.1. I got same issue. Fred Link to comment Share on other sites More sharing options...
PJALM© Posted March 16, 2014 Share Posted March 16, 2014 Getting closer now, it boots fine and shows as iMac14,2 now but no ethernet or imsg. Tried putting the ethernet kext in the ozmosis efi extensions folder and still no luck. I used FakeSMC 5.2.725 as I could not download the Slice 3.3.1 version. I removed some networking modules to make room, not sure if thats why or not but I only removed the ones that were mentioned in this thread. Link to comment Share on other sites More sharing options...
xpamamadeus Posted March 16, 2014 Author Share Posted March 16, 2014 Getting closer now, it boots fine and shows as iMac14,2 now but no ethernet or imsg. Tried putting the ethernet kext in the ozmosis efi extensions folder and still no luck. I used FakeSMC 5.2.725 as I could not download the Slice 3.3.1 version. For ethernet u need IONetworkingFamily too,only network kext its not enough to all work from firmware. Link to comment Share on other sites More sharing options...
PJALM© Posted March 16, 2014 Share Posted March 16, 2014 Oh so it changed in the new versions of Ozmosis? older one worked fine but no smbios data. I guess best option is to not put any ethernet at all in the firmware then as I use multiple versions of osx and injecting the ionetworking from mavs to lion would not work Link to comment Share on other sites More sharing options...
Riley Freeman Posted March 16, 2014 Share Posted March 16, 2014 Even after switching FakeSMC for Slice's version I still get the KP. I tried removing the sensor plugins but that didn't help. Also deleted kernelcache to make sure there was no conflict with the old Kozlek version. Link to comment Share on other sites More sharing options...
PJALM© Posted March 16, 2014 Share Posted March 16, 2014 thats strange, i got it working fine using the FakeSMC 5.2.725 but no plugins Link to comment Share on other sites More sharing options...
Revolutioner Posted March 16, 2014 Share Posted March 16, 2014 does this support only for UEFI Bios ??? or legacy too ??? Link to comment Share on other sites More sharing options...
Riley Freeman Posted March 16, 2014 Share Posted March 16, 2014 KP even with 5.2.725. I tried booting a fresh Mavericks installer just in case there was something in my installed copy it didn't like but the story was the same. I'm just gonna stick with 828M. This new one isn't worth the hassle. Link to comment Share on other sites More sharing options...
xpamamadeus Posted March 16, 2014 Author Share Posted March 16, 2014 does this support only for UEFI Bios ??? or legacy too ??? Plz read first post. "Ozmosis its a UEFI based bootloader that runs from firmware." 1 Link to comment Share on other sites More sharing options...
PJALM© Posted March 16, 2014 Share Posted March 16, 2014 well so far no luck, removed all networking from firmware and put them in efi and still no go Link to comment Share on other sites More sharing options...
Riley Freeman Posted March 16, 2014 Share Posted March 16, 2014 After starting again from scratch I can boot ok with just FakeSMC (either 5.2.725 or 3.3.1). Adding ANY of their sensor plugins will cause the KP. So although I've managed to get it to boot it's a step too far back in functionality over 828M for me. Hopefully the next one won't be so sensitive. Link to comment Share on other sites More sharing options...
PJALM© Posted March 16, 2014 Share Posted March 16, 2014 u can still load the plugins from the efi folder for me that lack of ethernet and imsg is the killer Link to comment Share on other sites More sharing options...
Riley Freeman Posted March 16, 2014 Share Posted March 16, 2014 True, but I don't need to do that with 828M. I have FakeSMC, sensors, ethernet and USB3 all loading from BIOS. Nothing at all needed in the EFI folder. Link to comment Share on other sites More sharing options...
PJALM© Posted March 17, 2014 Share Posted March 17, 2014 for me i do too but no imsg as no nvram Link to comment Share on other sites More sharing options...
truemac Posted March 18, 2014 Share Posted March 18, 2014 Hi all UEFI Clover works with New Ozmosis! Link to comment Share on other sites More sharing options...
blackosx Posted March 18, 2014 Share Posted March 18, 2014 Hi all UEFI Clover works with New Ozmosis! Cool. Thanks for the info truesoldier. I've missed not being able to use Clover UEFI. I'll try it tonight Link to comment Share on other sites More sharing options...
Recommended Posts