Yuras Posted August 11, 2013 Share Posted August 11, 2013 HAH! SORY I HAVE POSTED AS ASUS, IT'S GIGABYTE. Hi guys! Thanks for reading my topic. First, We have: - Gigabyte Z87-HD3 - Intel Core i5 4570 3,2Ghz - 32GB G.Skrill 2133Mhz ( For hackintosh start, only 8GB) - GT210 (is not connected now, we use internal HD4600 for install) So, we have tryed to start up 10.9 DP3 with my friend 7ender about 14H, and we have just little bit of progression. We use Chimera 2.1.2 (latest update), DSDT and FakeCMS. So, problem is, that if we boot hackintosh normal without DSDT, we stuck at bluetooth stage Normal start with DSDT Hackintosh can boot with -X. This pack include: - Extra folder what we use in chimera - Photos from bios ( if we have some wrong settings?) I hope someone can help us with this problem. Best. Regards Yuras Link to comment Share on other sites More sharing options...
mafhper Posted August 11, 2013 Share Posted August 11, 2013 Hello Yuras, would be nice of you to continue this discussion in the original thread. I have this same board and succeeded in getting it run perfectly through the information I received there. In general (I speak of what I learned in practice) go to the bios and disable the onboard graphics and the option for VT-d. Let us return to the beginning. Create a USB drive with MyHack again. Download the correct version of Chameleon (Chameleon-2.2svn-r2255) and apply it on your installation of MyHack. You may have to change the Boot.plist and arrow it to NCPI = 0x3000. This will fix some problems clock Haswell. I can not help you with the graphics, since my GPU is an AMD, but left the GraphicsEnabler = Yes, ATI Config (Uakari), Ports = 4 and ATI Graphics Mode 1920x1080x32. Proceed with the boot, select your usb drive ... well, I guess you know how to do this. After installing 10.9 DP1, try to make your GPU work. Do not waste time downloading DP2 .... DP5 if your setup is not ok. Turn the Kext Wizard and install the kexts you need. Repair permissions S / L / E and follow this direction ... Link to comment Share on other sites More sharing options...
Yuras Posted August 11, 2013 Author Share Posted August 11, 2013 Hello Yuras, would be nice of you to continue this discussion in the original thread. I have this same board and succeeded in getting it run perfectly through the information I received there. In general (I speak of what I learned in practice) go to the bios and disable the onboard graphics and the option for VT-d. Let us return to the beginning. Create a USB drive with MyHack again. Download the correct version of Chameleon (Chameleon-2.2svn-r2255) and apply it on your installation of MyHack. You may have to change the Boot.plist and arrow it to NCPI = 0x3000. This will fix some problems clock Haswell. I can not help you with the graphics, since my GPU is an AMD, but left the GraphicsEnabler = Yes, ATI Config (Uakari), Ports = 4 and ATI Graphics Mode 1920x1080x32. Proceed with the boot, select your usb drive ... well, I guess you know how to do this. After installing 10.9 DP1, try to make your GPU work. Do not waste time downloading DP2 .... DP5 if your setup is not ok. Turn the Kext Wizard and install the kexts you need. Repair permissions S / L / E and follow this direction ... Thanks dude for answer, can you upload your EFI folder with all inside? I try to modificate. Link to comment Share on other sites More sharing options...
ameris_cyning Posted August 11, 2013 Share Posted August 11, 2013 You aint the only one who deals with this All we have figured out from my thread is that trashing the Intel video kexts seems to work best Link to comment Share on other sites More sharing options...
Yuras Posted August 11, 2013 Author Share Posted August 11, 2013 NOW ALL WORKS! First, it's not the bluetooth problem, because bluetooth is okay, and all think that must be delete bluetooth kexts etc... JUST, turn of 4600HD and turn of in bios, start with videocard and DVI! Not VGA, only DVI or HDMI. Why? After Bluetooth is loaded, startup loginwindows, and if we have problems with video, it does'nt start. I say big thanks for 7Ender and amazing TimeWalker from Applelife.ru Good luck friends! Hope i helped you Link to comment Share on other sites More sharing options...
ham4ever Posted August 21, 2013 Share Posted August 21, 2013 hii , i just orderd haswell build same like ur mobo + i5 4570K can you tell me if needed extra kexts for audio or ethernet what os x u are using ? and what boot loader ? and bios version and changes u made thanks Link to comment Share on other sites More sharing options...
Recommended Posts