128keaton Posted December 3, 2014 Share Posted December 3, 2014 A little update, Clover boots OS X! I cannot get Acceleration! Tried FakeID, different kexts, etc. EDIT: It works beautifully! I ended up using Clover and injecting the fake ID: 0x67381002. Link to comment Share on other sites More sharing options...
amgclk65 Posted December 27, 2014 Share Posted December 27, 2014 Hello. Im trying to get a r5 230 to work. Clover bootloader. The device id is the same as a hd6450. Which the 6000kext has the device id and 3000kext. But will not load the kext. Only safe boot. I tried to add the device id to clover fakeid. Any ideas on what to do? Link to comment Share on other sites More sharing options...
Slice Posted December 27, 2014 Author Share Posted December 27, 2014 Hello. Im trying to get a r5 230 to work. Clover bootloader. The device id is the same as a hd6450. Which the 6000kext has the device id and 3000kext. But will not load the kext. Only safe boot. I tried to add the device id to clover fakeid. Any ideas on what to do? The deviceID=6779 is native so you need no to use FakeID. All ideas what to do you may read from topic. If you want a help you have to report step by step how you follow the Post#1. Link to comment Share on other sites More sharing options...
djuby Posted January 4, 2015 Share Posted January 4, 2015 Hi Slice, I'm trying to patch ATI Radeon HD 6470M (Device ID 0x67601002) with clover to enable graphics acceleration in Yosemite using your guide, but so far I'm not very successful. Please let me know if you can help me. I am absolutely ready to try any suggestions. The laptop is Sony VAIO VPCCA4S1E. I've attached the frame buffers extracted from the AMD6000Controller.kext and the Video BIOS dump showing the available connectors. I'm also using the latest version of the Clover boot loader. My current configuration is: Inject ATI=Yes FakeID=0x67601002 InjectEDID=Yes (with custom EDID) PatchVBIOS=Yes Dual Link=1 FB Name=Hydrilla Video Ports=5 Best regards, Djuby 1002.6760.8001.0200.vga.rom.decoded.txt Framebuffers.rtf config.plist.txt Link to comment Share on other sites More sharing options...
Slice Posted January 6, 2015 Author Share Posted January 6, 2015 FakeID must be value supported by OSX. It should not be native ID. FakeID != NativeID else no sense to set it. Link to comment Share on other sites More sharing options...
djuby Posted January 6, 2015 Share Posted January 6, 2015 FakeID must be value supported by OSX. It should not be native ID. FakeID != NativeID else no sense to set it. OK. I removed the FakeID. When I enable LoadVBIOS i get a blank screen (the LCD is lit but blank and the system is running). Which is a connector issue. Can you please help me with patching the connectors. Edit: The ID 0x67601002 is supported by OS X. It is present in AMD6000Controller.kext, AMDRadeonX3000.kext. Edit: I can see that only AMD6000Controller.kext, AMDRadeonX3000.kext and AMDSupport.kext are loaded. AMDFramebuffer.kext is not loaded. Link to comment Share on other sites More sharing options...
djuby Posted January 7, 2015 Share Posted January 7, 2015 Can anybody please help me choose the correct frame buffer in Yosemite for mobility Radeon HD 6470M (0x67601002). It is supported by the OS X. I currently have a working system but no graphics acceleration with SMBIOS iMac 12.1. My previous post has the Clover config.plist. Any suggestions will be greatly appreciated. Best regards, Djuby Link to comment Share on other sites More sharing options...
TheBosZ Posted January 16, 2015 Share Posted January 16, 2015 Greetings, I'm new to Insanelymac community but I appreciate a lot your efforts I have a dilemma: I have an HP g6 2212SL with i5 (intel HD4000 working smoothly) and HD 7670M 2Gb memory. Under Windows, choice of the two GPUs depends via software, since there's no UEFI choice to activate Mobility Radeon. Yesterday I installed Yosemite 10.10.1 using latest Clover release, I used Mavericks for many months with HD4000 working smoothly (but never checked QE/CI if worked, whatever..), and when I looked into Clover boot options I saw that Clover itself recognizes two GPUs (see picture): So my main question is: is it possible, even if BIOS doesn't allow GPU switch, to start OS X with Radeon? This would be very important for me Thanks 1 Link to comment Share on other sites More sharing options...
teddybearapple Posted January 16, 2015 Share Posted January 16, 2015 Mine shows exactly as yours. Not a misleading answer though but I have read a lot of solutions, threads and so on right here but from what I learnt it is only possible if your machines allows switching graphics in Bios. Well i will also appreciate that if that could work without seitch Link to comment Share on other sites More sharing options...
TheBosZ Posted January 16, 2015 Share Posted January 16, 2015 Mine shows exactly as yours. Not a misleading answer though but I have read a lot of solutions, threads and so on right here but from what I learnt it is only possible if your machines allows switching graphics in Bios. Well i will also appreciate that if that could work without seitch Understood. I hope that here could be a different answer, because modding Insyde Bios is not so easy as far as I understood by reading a lot on this Link to comment Share on other sites More sharing options...
styrian Posted January 16, 2015 Share Posted January 16, 2015 Hello! Possible solution for you could be this: http://www.insanelymac.com/forum/topic/296957-amd-switchable-graphics-working-manually-mirror-only-using-clover/ Have fun. 1 Link to comment Share on other sites More sharing options...
TheBosZ Posted January 16, 2015 Share Posted January 16, 2015 Thanks Styrian, I will follow that topic too In the meantime, is it possible to dump GPU bios under OS X? I read about GPU-Z but also I read that usually HPs' are tricky to get. Link to comment Share on other sites More sharing options...
styrian Posted January 16, 2015 Share Posted January 16, 2015 Hello! Perhaps with Darwin Dumper. Give it a try. Have fun. Link to comment Share on other sites More sharing options...
parkourtrane Posted February 12, 2015 Share Posted February 12, 2015 Hello Everybody! I'm kinda new to hackintosh OS. I wanted to install Hackintosh on my Dell Laptop, but in result I cannot get working graphics accelerator. I've tried install iAtkos Mountain Lion(with chameleon bootloader), Yosemite and Maverick(with Clover bootloader). None of them worked graphics accelerator. With chameleon bootloader I set GraphicsEnhancer=True and after loading system(Apple Logo and loading circle), it's showing white and black stripes. On Maverick I tried InjectATI and LoadVBios set to true and I got same result, only this time computer restarted. I've tried installing .kext packages with Kext Utility, same result.My Laptop Specs - Dell Inspiron N5010 CPU - i5 M480 2.6GHz RAM - 1066 MHz DDR3 GPU - ATi Radeon HD5650, 1 GB And one strange thing - I can't boot to OSX without USB plugged in. Right now on my Laptop is installed Maverick with Clover.Any ideas how to get graphics accelerator working? Hello Everybody! I'm kinda new to hackintosh OS. I wanted to install Hackintosh on my Dell Laptop, but in result I cannot get working graphics accelerator. I've tried install iAtkos Mountain Lion(with chameleon bootloader), Yosemite, Maverick(with Clover bootloader). None of them worked with graphics accelerator. With chameleon bootloader I set GraphicsEnhancer=True and after loading system(Apple Logo and loading circle), it's showing white and black stripes. On Maverick I tried Inject ATI and LoadVBios set to true and I got same result, only this time computer restarted. I've tried installing .kext packages with Kext Utility, same result. My Laptop Specs - Dell Inspiron N5010 CPU - i5 M480 2.6GHz RAM - 1066 MHz DDR3 GPU - Ati Radeon HD5650 1 GB And one strange thing - I can't boot to OSX without USB stick plugged in. Right now on my Laptop is installed Maverick with Clover Any ideas how to get graphics accelerator working? Link to comment Share on other sites More sharing options...
Slice Posted February 12, 2015 Author Share Posted February 12, 2015 Hello Everybody! Right now on my Laptop is installed Maverick with Clover Any ideas how to get graphics accelerator working? Again. Tell, please, how did you follow post #1. Step by step. Link to comment Share on other sites More sharing options...
parkourtrane Posted February 12, 2015 Share Posted February 12, 2015 Again. Tell, please, how did you follow post #1. Step by step. So I went to /System/Library/Extensions directory. Found AMD5000Controler.kext, checked the plist file, IOPCIMatch contained my Vendor and Device ID 0x68c11002. I did not found AMDRadeonAccelerator.kext, but in AMDRadeonX3000.kext I've added my ID. Link to comment Share on other sites More sharing options...
Slice Posted February 12, 2015 Author Share Posted February 12, 2015 So I went to /System/Library/Extensions directory. Found AMD5000Controler.kext, checked the plist file, IOPCIMatch contained my Vendor and Device ID 0x68c11002. I did not found AMDRadeonAccelerator.kext, but in AMDRadeonX3000.kext I've added my ID. It is only half of the work. And seems to be not enough. Link to comment Share on other sites More sharing options...
parkourtrane Posted February 13, 2015 Share Posted February 13, 2015 It is only half of the work. And seems to be not enough. Yep, I read the following tutorial, and came to problem, that I can't dumb GPU bios, tried several apps on Windows, none of them worked. Link to comment Share on other sites More sharing options...
Slice Posted February 13, 2015 Author Share Posted February 13, 2015 Yep, I read the following tutorial, and came to problem, that I can't dumb GPU bios, tried several apps on Windows, none of them worked. And what if you skip the step with BIOS? Link to comment Share on other sites More sharing options...
parkourtrane Posted February 15, 2015 Share Posted February 15, 2015 And what if you skip the step with BIOS? So I was playing around with hackintosh today I discovered that driver works, well, almost. The problem is that resolution entry in chameleon plist file is 1366x768, somehow osx does not know this resolution and enables 800x600. So that was why I got white screen lines. I connected external display, and wanted to change resolution to 1366x768, but I did not found. The closest(working) resolution was 1280x768. This resolution works well on Hackintosh, atleast it shows on built in display. Also 1024x768 did not worked on builtin display, but somehow when GraphicsEnabler is off it works. I think same problem was with Clover, just osx did not recognize 1366x768. I'm currently using iAtkos Mountain Lion with chameleon. Any ideas how to get resolution to 1366x768? Link to comment Share on other sites More sharing options...
Slice Posted February 16, 2015 Author Share Posted February 16, 2015 So I was playing around with hackintosh today I discovered that driver works, well, almost. The problem is that resolution entry in chameleon plist file is 1366x768, somehow osx does not know this resolution and enables 800x600. So that was why I got white screen lines. I connected external display, and wanted to change resolution to 1366x768, but I did not found. The closest(working) resolution was 1280x768. This resolution works well on Hackintosh, atleast it shows on built in display. Also 1024x768 did not worked on builtin display, but somehow when GraphicsEnabler is off it works. I think same problem was with Clover, just osx did not recognize 1366x768. I'm currently using iAtkos Mountain Lion with chameleon. Any ideas how to get resolution to 1366x768? "Any idea" is to use Clover and set InjectEDID=true Don't think Clover is "the same" and that you can repeat all of this with Chameleon! Link to comment Share on other sites More sharing options...
SiddRamesh Posted February 20, 2015 Share Posted February 20, 2015 m getting full QE/CI with IOReg ROM(Downloaded from internet) in files but not with my ROM(my sys). For the 7650m specifically, here is the data I ended up using: FBName Pondweed (3 Ports) ATI Controllers Data 02000000000100000901010010000505000400000403000000010200110201 0100040000040300000001030021030202 ATI Controllers Patch 02000000400000000901010010010707000800000002000000010200110201 0110000000100000000001030000000808 but no luck M getting QE/CI with this(IOReg ROM), <key>Graphics</key> <dict> <key>DualLink</key> <integer>0</integer> <key>FBName</key> <string>Ipomoea</string> <key>Inject</key> <dict> <key>ATI</key> <true/> </dict> <key>InjectEDID</key> <true/> <key>LoadVBios</key> <true/> <key>VRAM</key> <integer>1024</integer> <key>VideoPorts</key> <integer>3</integer> </dict> <key>KernelAndKextPatches</key> <dict> <key>ATIConnectorsController</key> <string>6000</string> <key>ATIConnectorsData</key> <string>000400000403000000010000120401050008000004020000000100001102040310000000100000000001000000000002</string> <key>ATIConnectorsPatch</key> <string>020000004000000009010000200100070008000004020000000100002103040510000000100000000001000000000101</string> DarwinDumper_2.9.8beta1_INSYDE_Corp._X64_Yos_SiddRamesh.zip Link to comment Share on other sites More sharing options...
Slice Posted February 20, 2015 Author Share Posted February 20, 2015 M getting QE/CI with this(IOReg ROM), No more problems? Link to comment Share on other sites More sharing options...
SiddRamesh Posted February 20, 2015 Share Posted February 20, 2015 having gradient issue with it y m not getting QE/CI with Native ROM I've fixed the grading issue in basic param in EDID. Link to comment Share on other sites More sharing options...
SiddRamesh Posted February 20, 2015 Share Posted February 20, 2015 sorry slice it worked it was my mistake, it was naming issue instated of this 1002_6841.rom I've named it 1002.6841.rom. a big sorry Thanks a lot Slice Link to comment Share on other sites More sharing options...
Recommended Posts