Picasso Posted September 13, 2013 Author Share Posted September 13, 2013 Yes!!!! i7 4770K with mobo ga-z87x-ud5h!!! Install Audio After reboot with kext utility. 10.8.5.tiff Link to comment Share on other sites More sharing options...
FusselFux Posted September 13, 2013 Share Posted September 13, 2013 Yes!!!! i7 4770K with mobo ga-z87x-ud5h!!! Install Audio After reboot with kext utility. what audio kexts did you installed? Link to comment Share on other sites More sharing options...
Picasso Posted September 13, 2013 Author Share Posted September 13, 2013 what audio kexts did you install I´ve losted TRIM for the SSD, any kext? EDIT: the only TRIM that works it´s from Multibxxxx. I hope to find other one. Try the patch alc898 from TOLEDA. Works perfect if you have the original HDA from update. http://www.insanelymac.com/forum/topic/290797-mountain-lion-realtek-alc-applehda-audio/page-2?do=findComment&comment=1945395 Link to comment Share on other sites More sharing options...
FusselFux Posted September 14, 2013 Share Posted September 14, 2013 (edited) to get the 10.8.5 installscreen (created bootusbstick with myhack) i deleted all kexts, excluded fakesmc, and i used the org.chameleon.Boot.plist and smbios.plist from my working extra-folder (you can find it here) at the extra folder of the usb-stick. after that i reached the installer. network port 1: not working with AppleIntelE1000e.kext (working with 10.8.4) network port 2: working with AppleIGB.kext usb3: as usb2 sound: working after removing npci=0x2000 / npci=0x3000 trim: not using ssd dvd-playback: working after removing DVDPlayback.framework the 10.8.5 beta was crashing often while video playback. will test soon and edit this post. Edited September 16, 2013 by FusselFux 1 Link to comment Share on other sites More sharing options...
Picasso Posted September 14, 2013 Author Share Posted September 14, 2013 to get the 10.8.5 installscreen (created bootusbstick with myhack) i deleted all kexts, excluded fakesmc, and i used the org.chameleon.Boot.plist and smbios.plist from my working extra-folder (you can find it here) at the extra folder of the usb-stick. after that i reached the installer. network port 1: not tested network port 2: not tested usb3: not tested sound: not tested trim: not using ssd dvd-playback: not tested the 10.8.5 beta was crashing often while video playback. will test soon and edit this post. You have exactly my hardware. Tell me if you need any file. I used a software called Darwin Dumper after installation to check all the system.(Thanks iFIRE). Link to comment Share on other sites More sharing options...
FusselFux Posted September 14, 2013 Share Posted September 14, 2013 i can't get audio to work with toleda's kind of patching. + hdaenabler 1, 2, 12, 898 i tried also your 2 applehda what smbios do u use? Link to comment Share on other sites More sharing options...
Picasso Posted September 15, 2013 Author Share Posted September 15, 2013 i can't get audio to work with toleda's kind of patching. + hdaenabler 1, 2, 12, 898 i tried also your 2 applehda what smbios do u use? 13.1 Works too with 3.1 and the benchmark are a little bit faster. I get Toleda audio works reinstalling 10.8.5. ( AppleHDA clean from Apple). Check HDA Enabler Kexts, it's not deleted when you apply combo. Even Voodoo, deleted previously. Don'y you know the exactly flag that I have to write to get HD4600? I tried a lot! Link to comment Share on other sites More sharing options...
FusselFux Posted September 15, 2013 Share Posted September 15, 2013 13.1 Works too with 3.1 and the benchmark are a little bit faster. I get Toleda audio works reinstalling 10.8.5. ( AppleHDA clean from Apple). Check HDA Enabler Kexts, it's not deleted when you apply combo. Even Voodoo, deleted previously. Don'y you know the exactly flag that I have to write to get HD4600? I tried a lot! i made a clean install and made a backup of applehda. with myhack the speed of the beachball and so on is much to fast. with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] from tony-mac the speed is as it should.. don't know why. reinstalled it again. tried again toledas patch. installed hdaenabler1, reboot, next try with2, and the other try with12.. not working. Link to comment Share on other sites More sharing options...
Picasso Posted September 15, 2013 Author Share Posted September 15, 2013 i made a clean install and made a backup of applehda. with myhack the speed of the beachball and so on is much to fast. with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] from tony-mac the speed is as it should.. don't know why. reinstalled it again. tried again toledas patch. installed hdaenabler1, reboot, next try with2, and the other try with12.. not working. - I let you the files that I am using by Toleda and other files. - Delete myhack kexst from extensions and leave the EXTRA folder empty. - Replace the kexts I give you in the folder - by iFIRE. - Smbios 13.1 AUDIO and others.zip Link to comment Share on other sites More sharing options...
FusselFux Posted September 15, 2013 Share Posted September 15, 2013 - I let you the files that I am using by Toleda and other files. - Delete myhack kexst from extensions and leave the EXTRA folder empty. - Replace the kexts I give you in the folder - by iFIRE. - Smbios 13.1 - I let you the files that I am using by Toleda and other files. - Delete myhack kexst from extensions and leave the EXTRA folder empty. - Replace the kexts I give you in the folder - by iFIRE. - Smbios 13.1 made a clean install before. tested again toledas patch. i installed your kext with kextutility. not working. voodoohda works, but not applehda Link to comment Share on other sites More sharing options...
Picasso Posted September 15, 2013 Author Share Posted September 15, 2013 made a clean install before. tested again toledas patch. i installed your kext with kextutility. not working. voodoohda works, but not applehda - Check Bios setting Defaults - Disable video onboard. - Run Darwin Dumper and check in kext files result if something it´s not working. Link to comment Share on other sites More sharing options...
FusselFux Posted September 16, 2013 Share Posted September 16, 2013 - Check Bios setting Defaults - Disable video onboard. - Run Darwin Dumper and check in kext files result if something it´s not working. loaded bios defaults. enabled only hotplug at sata and disabled internal gpu. - my applehda patched with toledas -85 script + hdaenabler1 - your applehda with hdaenabler898 - with voodoohda Link to comment Share on other sites More sharing options...
FusselFux Posted September 16, 2013 Share Posted September 16, 2013 loaded bios defaults. enabled only hotplug at sata and disabled internal gpu. - my applehda patched with toledas -85 script + hdaenabler1 - your applehda with hdaenabler898 - with voodoohda after removing npci=0x3000 from bootflags its working! thanks to toleda and smolderas and picasso 1 Link to comment Share on other sites More sharing options...
oswaldini Posted October 3, 2013 Share Posted October 3, 2013 For Intel I210 try kext from Mavericks 10.9 DP8: http://www.insanelymac.com/forum/topic/292354-appleinteli210ethernetkext-in-mavericks/ Link to comment Share on other sites More sharing options...
FusselFux Posted October 3, 2013 Share Posted October 3, 2013 For Intel I210 try kext from Mavericks 10.9 DP8: http://www.insanelymac.com/forum/topic/292354-appleinteli210ethernetkext-in-mavericks/ not working. i got the Network port at system controll as working, but with an 169.xxx ip. shown as connected if not connected. with manually IP and speedsetting the port isn't also not working with 10.8.5 now i'm using clover. had a lot of troubles with chameleon Link to comment Share on other sites More sharing options...
oswaldini Posted October 3, 2013 Share Posted October 3, 2013 Then try Mavericks DP8 Link to comment Share on other sites More sharing options...
Picasso Posted October 4, 2013 Author Share Posted October 4, 2013 not working. i got the Network port at system controll as working, but with an 169.xxx ip. shown as connected if not connected. with manually IP and speedsetting the port isn't also not working with 10.8.5 now i'm using clover. had a lot of troubles with chameleon Then try Mavericks DP8 This are my files, and are working perfect in 10.8.5, same mobo as FusselFux. The only thing that was imposible for me was HD4600 with QE, with out injection works but itsnt working with FINAL CUT X AND DAVINCI. Tell me if you need a plist or something like that. ethernet.zip Link to comment Share on other sites More sharing options...
FusselFux Posted October 4, 2013 Share Posted October 4, 2013 i'll try 10.9 if it's out. i'm not using the HD4600. i'm having the same network kexts (downloaded from hnak http://sourceforge.net/projects/osx86drivers/files/Kext/Snow_Lion/ ) the AppleIGB.kext is having a trouble. not working after sleep. http://www.insanelymac.com/forum/topic/273073-appleigbkext/ I confirmed the driver fails in establishing link after wake-up. I could not fix it. If someone find a way, tell me how to do it. The driver is updated to 5.0.6. the thread for AppleIntelE1000e is here http://www.insanelymac.com/forum/topic/205771-appleintele1000ekext-for-108107106105/ Link to comment Share on other sites More sharing options...
Picasso Posted October 4, 2013 Author Share Posted October 4, 2013 i'll try 10.9 if it's out. i'm not using the HD4600. i'm having the same network kexts (downloaded from hnak http://sourceforge.net/projects/osx86drivers/files/Kext/Snow_Lion/ ) the AppleIGB.kext is having a trouble. not working after sleep. http://www.insanelymac.com/forum/topic/273073-appleigbkext/ the thread for AppleIntelE1000e is here http://www.insanelymac.com/forum/topic/205771-appleintele1000ekext-for-108107106105/ New official update 10.8.5 F46. Fixes some problems after sleep... EDIT: No problems with new update, only reinstall HDA and HDA ENABLER. Link to comment Share on other sites More sharing options...
FusselFux Posted October 4, 2013 Share Posted October 4, 2013 New official update 10.8.5 F46. Fixes some problems after sleep... EDIT: No problems with new update, only reinstall HDA and HDA ENABLER. same error after sleep with AppleIGB.kext. same with the AppleIntelI210Ethernet.kext from dp8. it isnt working after update. Link to comment Share on other sites More sharing options...
FusselFux Posted October 4, 2013 Share Posted October 4, 2013 After OS X update with appstore today from 12F36 to 12F45 i needed to disable the patching of AppleRTC at the config.plist of Clover. Else booting works only with UseKernelCache=No Link to comment Share on other sites More sharing options...
Picasso Posted October 5, 2013 Author Share Posted October 5, 2013 After OS X update with appstore today from 12F36 to 12F45 i needed to disable the patching of AppleRTC at the config.plist of Clover. Else booting works only with UseKernelCache=No Why you use Clover? Link to comment Share on other sites More sharing options...
FusselFux Posted October 5, 2013 Share Posted October 5, 2013 Why you use Clover? clover is having direct access to the uefi and coause the troubles with chameleon. wanted to boot (only working with -f -v -x it was working and not every time) and if i switched on the pc it takes looooooong till start chameleon with errors like EBIOS Read ERROR 0x31 (came from internal USB Card-Reader) having at the other os x setup (for try out) chameleon as bootloader Link to comment Share on other sites More sharing options...
mamonaryder Posted November 23, 2013 Share Posted November 23, 2013 clover is having direct access to the uefi and coause the troubles with chameleon. wanted to boot (only working with -f -v -x it was working and not every time) and if i switched on the pc it takes looooooong till start chameleon with errors like EBIOS Read ERROR 0x31 (came from internal USB Card-Reader) having at the other os x setup (for try out) chameleon as bootloader sorry, i'm new by in hackintosh (not in other os...) ... same problem... same mother same cpu ati 7770... bios F7 after sleep don't wake up... try all!!!! all kext in the world xDD and the beta bios ? http://www.mediafire.com/download/uy3813d6c54q31j/Z87XUD5H.8c.zip maybe ?? sorry for my english... Link to comment Share on other sites More sharing options...
Picasso Posted November 23, 2013 Author Share Posted November 23, 2013 sorry, i'm new by in hackintosh (not in other os...) ... same problem... same mother same cpu ati 7770... bios F7 after sleep don't wake up... try all!!!! all kext in the world xDD and the beta bios ? http://www.mediafire.com/download/uy3813d6c54q31j/Z87XUD5H.8c.zip maybe ?? sorry for my english... Try with Maverick! It's free. It's faster. And works perfect with your configuration. When I had 10.8.5 and 10.8.4 the problem from sleep was USB, and I repaired with iousbfamily. Take my recommendation. Go with maverick, its 30% faster and works perfect in that mother and processor. Only you have to put HDA from Toleda, in this site and finish! Link to comment Share on other sites More sharing options...
Recommended Posts