Jump to content

Success - Gigabyte Z87X-UD3H Mavericks DP2 Haswell Hackintosh

gaspimp

By gaspimp,
in OSx86 10.9 (Mavericks)

 Share
248 posts in this topic

Recommended Posts

aliab
aliab
Posted
Posted

HI everybody!

 

GAZ87-XUD3H, i4770, Mavericks 10.9.2

 

Chameleon-r2377, HWSensors.6.0.1115,

AHCI_3rdParty_SATA.kext/

AppleHDA patched
HDAEnabler1.kext
AppleIntelCPUPowerManagement patched
AppleIntelE1000e
 

Everything works nicely but no good power management here ! just get low coeff x8 and high x34 plus turbo x35,x36,x37 ?

reading the thread i see that the problem seem to be not so simple

I can't manage to compile DSDT to get rid of AppleCPUPowerMnagement and HDAEnabler

it would be nice, if someone could post edited one

 

Thank you 

Link to comment
Share on other sites
devdev001
devdev001
Posted
Posted

HI everybody!

 

GAZ87-XUD3H, i4770, Mavericks 10.9.2

 

Chameleon-r2377, HWSensors.6.0.1115,

AHCI_3rdParty_SATA.kext/

AppleHDA patched
HDAEnabler1.kext
AppleIntelCPUPowerManagement patched
AppleIntelE1000e
 

Everything works nicely but no good power management here ! just get low coeff x8 and high x34 plus turbo x35,x36,x37 ?

reading the thread i see that the problem seem to be not so simple

I can't manage to compile DSDT to get rid of AppleCPUPowerMnagement and HDAEnabler

it would be nice, if someone could post edited one

 

Thank you 

 

Hello All

 

I have the same setup for my hack, and am having the same exact issue.  The only difference is I am using an SSDT instead of HDAEnabler1.  I am also using SSDT created by Pike's script, but it doesn't seem to work.  Smbios is MacPro 3,1.

 

Any thoughts or pointers in the right direction would be greatly appreciated

 

devdev001

Link to comment
Share on other sites
  • 2 weeks later...
eivinds
eivinds
Posted
Posted

same here. but mine was just due to XHC. After checking syslog, it started last December 18th, 2013. My last change was the update to 10.9.1 perhaps some of the kexts (mine USB 3.0 specifically) needs to be updated. not sure. 

 

-- Update

After some isolation, it seems that the Corsair H100i USB Link which was attached to the USB2.0 header of the board is causing the sleep issue. Not yet sure how to resolve this without removing the USB Link.

I am having the same issue I think, it seems like the USB2.0 header is waking up directly after going to sleep.

Wake reason: XHC

 

Did you find anything more on this?

Link to comment
Share on other sites
kryten
kryten
Posted
Posted

HI everybody!

 

GAZ87-XUD3H, i4770, Mavericks 10.9.2

 

Chameleon-r2377, HWSensors.6.0.1115,

AHCI_3rdParty_SATA.kext/

AppleHDA patched
HDAEnabler1.kext
AppleIntelCPUPowerManagement patched
AppleIntelE1000e
 

Everything works nicely but no good power management here ! just get low coeff x8 and high x34 plus turbo x35,x36,x37 ?

reading the thread i see that the problem seem to be not so simple

I can't manage to compile DSDT to get rid of AppleCPUPowerMnagement and HDAEnabler

it would be nice, if someone could post edited one

 

Thank you 

AppleIntelCPUPowerManagement.kext isn't even loaded. Haswell uses XCPM.

 

 

Hello All

 

I have the same setup for my hack, and am having the same exact issue.  The only difference is I am using an SSDT instead of HDAEnabler1.  I am also using SSDT created by Pike's script, but it doesn't seem to work.  Smbios is MacPro 3,1.

 

Any thoughts or pointers in the right direction would be greatly appreciated

 

devdev001

Don't use a MacPro 3.1 Smbios.

After some fiddling I managed to get one additional CPU P-State : 8 17 35 36 37 38 39 on my Z87X-UD3H with i7 4470k.

I'm using a MacPro6,1 Smbios. 

  • Like 1
Link to comment
Share on other sites
devdev001
devdev001
Posted
Posted

AppleIntelCPUPowerManagement.kext isn't even loaded. Haswell uses XCPM.

 

 

Don't use a MacPro 3.1 Smbios.

After some fiddling I managed to get one additional CPU P-State : 8 17 35 36 37 38 39 on my Z87X-UD3H with i7 4470k.

I'm using a MacPro6,1 Smbios. 

 

Thanks...   Will try that soon.  I also heard/saw something about using an iMac smbios.  Does anyone know if it has any benefits?

 

Thanks,

devdev001

Link to comment
Share on other sites
kryten
kryten
Posted
Posted

It's the closest match CPU wise. You can easily try one with Chameleon wizard and see if it makes any difference. 

Mind if I ask a question? Did Pike"s SSDT script also generated P-States for 2 CPU's for you? CPU0 and CPU1

Link to comment
Share on other sites
aliab
aliab
Posted
Posted

Thank's Kryten

 

yes! no need of patched AppleIntelCPUPowerManagement.kext 

so my kext in S/L/E are 

 

AHCI_3rdParty_SATA.kext/

AppleHDA.kext/
FakeSMC.kext/
GenericUSBXHCI.kext/
HDAEnabler1.kext/
IONetworkingFamily.kext/
 
and everything seems to work but HDAEnabler1.kext makes the boot very long, so could you suggest another solution?
edit: fast boot recovery with HDEF edit in dsdt
Link to comment
Share on other sites
kryten
kryten
Posted
Posted

 

Thank's Kryten

 

yes! no need of patched AppleIntelCPUPowerManagement.kext 

so my kext in S/L/E are 

 

AHCI_3rdParty_SATA.kext/

AppleHDA.kext/
FakeSMC.kext/
GenericUSBXHCI.kext/
HDAEnabler1.kext/
IONetworkingFamily.kext/
 
and everything seems to work but HDAEnabler1.kext makes the boot very long, so could you suggest another solution?
edit: fast boot recovery with HDEF edit in dsdt

 

Any special reason you are using AHCI_3rdParty_SATA,GenericUSBXHCI,IONetworkingFamily kext?

Can you specify fast boot revovery in DSDT? Thanks.

Link to comment
Share on other sites
aliab
aliab
Posted
Posted

Yes of course,

 

Audio AlCInjection with HDEF-dsdt guide by toleda ;

really fast boot now, i had to wait for 2 minutes before boot with HDAEnabler1

AppleIntelE1000e is inside IONetworkingFamily.kext ;
edit : no more 
GeneriCUSBXHCI for all usb2 devices to work properly on every ports
AHCI_3rdParty_SATA just cosmetic one i suppose ?
 
so Kexts in S/L/E are
 
AppleHDA.kext 2.6.0-toledaALC898
AppleIntelE1000e.kext 3.0.4
FakeSMC.kext 6.0.1123
GenericUSBXHCI.kext 1.2.7
AHCI_3rdParty_SATA.kext
 
and definition in smbios.plist is
 
MacPro6,1 
 
ps: HD4600 is working well but not on my old Apple Cinema 23" display ?
so i have got a geforce 210 
 
EDIT : yes! no need of patched AppleIntelCPUPowerManagement.kext 
seem to be necessary to have patched one or DSDT HPET edit in order to get proper sleep behavior
Can someone confirm this observation?
Link to comment
Share on other sites
wilka1961
wilka1961
Posted
Posted

Hi,

 

I found some interesting thread which is perfect for me since I own the same MB.

I'm stuck after installation since system doesn't boot except with particular condition.

 

Conf:

Z87X-UD3H

i7-4770K

Dual ATI R9 - 280X  (connected with crossfire)

 

edit:  

used the BIOS settings as first thread

used latest svn 2377 for bootloader

/edit

 

I couldn't use the ATI for installation. I did use the onboard intel GPU.  Installed kext as attached v.1.3

First system boot hang without a kernal panic.. it just stops.

 

I can only manage to boot completely in Safe mode....   

From there I see the 2 ATI cards are recognized ( as Radeon 7xxxx )

 

If I disable the intel GPU and move my monitor to the first ATI card (pci slot 1) I see that system boots but when it switch on 'graphics mode' it end up with a black screen.

I also tried the DSDT present in some post in this thread. Still no luck.

 

Any suggestion?

 

Thanks!

Link to comment
Share on other sites
wilka1961
wilka1961
Posted
Posted

Hi,

 

I found some interesting thread which is perfect for me since I own the same MB.

I'm stuck after installation since system doesn't boot except with particular condition.

 

Conf:

Z87X-UD3H

i7-4770K

Dual ATI R9 - 280X  (connected with crossfire)

 

edit:  

used the BIOS settings as first thread

used latest svn 2377 for bootloader

/edit

 

I couldn't use the ATI for installation. I did use the onboard intel GPU.  Installed kext as attached v.1.3

First system boot hang without a kernal panic.. it just stops.

 

I can only manage to boot completely in Safe mode....   

From there I see the 2 ATI cards are recognized ( as Radeon 7xxxx )

 

If I disable the intel GPU and move my monitor to the first ATI card (pci slot 1) I see that system boots but when it switch on 'graphics mode' it end up with a black screen.

I also tried the DSDT present in some post in this thread. Still no luck.

 

Any suggestion?

 

Thanks!

 

Hi... just want to tell you that was something related to bootloader...

I tried a different one (the other) and the internal gpu was injected correctly... full resolution without any boot option.

 

I went one step further and I tried clover...

Configuration is pretty easy since this mobo doesn't need anything... 

 

Boot time is around 7 seconds including mobo boot.. simply amazing!

 

Unfortunately I have introduced a little issue... sleep doesn't work

Will keep looking to solve that.

 

Anyone successful with clover to sleep?

Link to comment
Share on other sites
dcshoes23
dcshoes23
Posted
Posted

I'm using Clover. It is working very well. I don't use the integrated graphics though. I have them disabled and am using an Sapphire HD6870 instead. It just works, I didn't have to do anything. The only kext that I have in the EFI/kexts/10.9 folder is the ethernet kext from this thread. The audio I managed to get working with Clover kext patching but then about 30 seconds after waking from sleep the audio stops working. I was reading that it might be a bug with 10.9.2 as people with real iMac's are experiencing it to. I managed to resolve it by putting the 2 audio kexts from this thread in S/L/E. Sleep and everything work fine. I did notice that when pushing the power button to go to sleep, you need to kind of give it a good press where you hold it down for about half a second. If you do it too quickly nothing will happen. For best results, just use sleep from the Apple menu.

Link to comment
Share on other sites
wilka1961
wilka1961
Posted
Posted

I'm using Clover. It is working very well. I don't use the integrated graphics though. I have them disabled and am using an Sapphire HD6870 instead. It just works, I didn't have to do anything. The only kext that I have in the EFI/kexts/10.9 folder is the ethernet kext from this thread. The audio I managed to get working with Clover kext patching but then about 30 seconds after waking from sleep the audio stops working. I was reading that it might be a bug with 10.9.2 as people with real iMac's are experiencing it to. I managed to resolve it by putting the 2 audio kexts from this thread in S/L/E. Sleep and everything work fine. I did notice that when pushing the power button to go to sleep, you need to kind of give it a good press where you hold it down for about half a second. If you do it too quickly nothing will happen. For best results, just use sleep from the Apple menu.

 

interesting.. I actually put FakeSMC as well on EFI/kexts/10.9  Gonna try to remove from there  (how did you set System preferences .. Inject YES / IfYesNoFakeSMSC? ).

I also disabled the integrated graphics now but no sleep yet.

 

At the moment it looks like is going to sleep (screen goes black, psu goes off) but then it wakes up again.

I guess something wake it up.

Link to comment
Share on other sites
dcshoes23
dcshoes23
Posted
Posted

interesting.. I actually put FakeSMC as well on EFI/kexts/10.9  Gonna try to remove from there  (how did you set System preferences .. Inject YES / IfYesNoFakeSMSC? ).

I also disabled the integrated graphics now but no sleep yet.

 

At the moment it looks like is going to sleep (screen goes black, psu goes off) but then it wakes up again.

I guess something wake it up.

 

I had to do "Inject Kexts" "Yes", I found that it wouldn't inject with any other setting.

 

I am using MacPro3,1 smbios.

 

Oh, and I made a typo, the path for kexts is /EFI/CLOVER/kexts/10.9 (I'm sure you had the write path since the folders are generated during install)

 

Make sure that you have the network kext installed, even if you don't use the network card. The only other thing that I could think of preventing sleep would be your video card. Maybe test with them taken out of your computer.

I believe that SpeedStep is working perfectly with Clover.

 

My CPU is going as low as 800MHz and seems to be stepping fine.

 

Screenshot%202014-03-18%2011.43.12.png?d

 

Also AppleIntelCPUPowerManagementInfo reports the following:

2014-03-18 11:41:35.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 ]

I am quite happy with Clover and this board. I even have my Clover boot menu at full 2560x1440 resolution  :D

  • Like 1
Link to comment
Share on other sites
kryten
kryten
Posted
Posted

@dcshoes23

 

I allmost choked when I saw your output of AppleIntelCPUPowerManagementInfo.

Can you share your Clover config? I've never used it. Anything special you did to achieve this result.

Are you generating c and p states from within Clover or are you using ssdt?

Can you post the entire output you get from AppleIntelCPUPowerManagementInfo ? Is the kernel using

XCPM? You can check that from terminal with a command, don't know the command by heart. I'm typing all this from an iPad.

Check in Console for XCPM: registered

IOPPF: XCPM mode or in Terminal : sysctl machdep.xcpm

Link to comment
Share on other sites
dcshoes23
dcshoes23
Posted
Posted

@dcshoes23

 

I allmost choked when I saw your output of AppleIntelCPUPowerManagementInfo.

Can you share your Clover config? I've never used it. Anything special you did to achieve this result.

Are you generating c and p states from within Clover or are you using ssdt?

Can you post the entire output you get from AppleIntelCPUPowerManagementInfo ? Is the kernel using

XCPM? You can check that from terminal with a command, don't know the command by heart. I'm typing all this from an iPad.

Check in Console for XCPM: registered

IOPPF: XCPM mode or in Terminal : sysctl machdep.xcpm

 

I honestly didn't do much, Clover is magic! :D I even have a recovery partition and used it to perform a Time Machine restore off of my server (Fedora using Netatalk).

 

BTW, I have a Z87X-UD3H and i5 4670K running the latest 10.9.2

 

Here is everything from Console when I filter by "AICPUPMI":

2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MWAIT C-States.....................: 270624
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_CORE_THREAD_COUNT......(0x35)  : 0x40004
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PLATFORM_INFO..........(0xCE)  : 0x80838F3012200
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PMG_CST_CONFIG_CONTROL.(0xE2)  : 0x1E000007
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PMG_IO_CAPTURE_BASE....(0xE4)  : 0x1814
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: IA32_MPERF.................(0xE7)  : 0x10DA941247
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: IA32_APERF.................(0xE8)  : 0x10C4A14667
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_FLEX_RATIO.............(0x194) : 0xE0000
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_IA32_PERF_STATUS.......(0x198) : 0x23B700002400
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_IA32_PERF_CONTROL......(0x199) : 0x2600
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: IA32_CLOCK_MODULATION......(0x19A) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: IA32_THERM_STATUS..........(0x19C) : 0x883E0000
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: IA32_MISC_ENABLES..........(0x1A0) : 0x850089
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_MISC_PWR_MGMT..........(0x1AA) : 0x1
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x24252626
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x5
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_POWER_CTL..............(0x1FC) : 0x4005F
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_RAPL_POWER_UNIT........(0x606) : 0xA0E03
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKG_POWER_LIMIT........(0x610) : 0xFFD00000EA82
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKG_ENERGY_STATUS......(0x611) : 0x81379C
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKGC3_IRTL.............(0x60a) : 0x8842
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKGC6_IRTL.............(0x60b) : 0x886A
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKGC7_IRTL.............(0x60c) : 0x8891
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x1F40
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PP0_POWER_LIMIT........(0x638) : 0xFFD0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PP0_ENERGY_STATUS......(0x639) : 0x492F03
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PP0_POLICY.............(0x63a) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_CONFIG_TDP_NOMINAL.....(0x648) : 0x22
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_CONFIG_TDP_LEVEL1......(0x649) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_CONFIG_TDP_LEVEL2......(0x64a) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_CONFIG_TDP_CONTROL.....(0x64b) : 0x80000000
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_TURBO_ACTIVATION_RATIO.(0x64c) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: CPU Low Frequency Mode.............: 800 MHz
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: CPU Maximum non-Turbo Frequency....: 3400 MHz
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: CPU Maximum Turbo Frequency........: 3800 MHz
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 34 36 ]
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 ]
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: CPU C7-Cores [ 0 1 2 ]
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 30 34 (36) ]
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 ]
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: CPU C7-Cores [ 0 1 2 3 ]
2014-03-18 11:40:31.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 30 34 36 (37) ]
2014-03-18 11:40:32.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 30 34 35 (36) 37 ]
2014-03-18 11:40:34.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 30 34 35 36 37 (38) ]
2014-03-18 11:40:35.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 28 30 34 35 36 37 38 ]
2014-03-18 11:40:36.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 18 28 30 34 35 36 37 38 ]
2014-03-18 11:40:36.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 10 18 28 30 34 35 36 37 38 ]
2014-03-18 11:40:37.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 10 18 21 28 30 (34) 35 36 37 38 ]
2014-03-18 11:40:40.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 10 18 21 26 28 30 (34) 35 36 37 38 ]
2014-03-18 11:40:41.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 10 18 21 26 27 28 30 34 35 36 37 38 ]
2014-03-18 11:40:51.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 10 18 21 26 27 28 30 32 (34) 35 36 37 38 ]
2014-03-18 11:40:52.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 10 18 21 26 27 28 30 31 32 (34) 35 36 37 38 ]
2014-03-18 11:40:54.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 10 18 21 25 26 27 28 30 31 32 34 35 36 37 38 ]
2014-03-18 11:40:56.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 10 18 21 24 25 26 27 28 30 31 32 (34) 35 36 37 38 ]
2014-03-18 11:40:57.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 10 18 21 24 25 26 27 28 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:40:58.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 10 18 21 23 24 25 26 27 28 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:40:58.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 18 21 23 24 25 26 27 28 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:40:59.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 14 18 21 23 24 25 26 27 28 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:41:02.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 9 10 14 18 21 22 23 24 25 26 27 28 30 31 32 33 (34) 35 36 37 38 ]
2014-03-18 11:41:02.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 14 15 18 21 22 23 24 25 26 27 28 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:41:04.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 11 14 15 18 21 22 23 24 25 26 27 28 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:41:04.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 11 14 15 16 18 21 22 23 24 25 26 27 28 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:41:07.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 11 13 14 15 16 18 21 22 23 24 25 26 27 28 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:41:08.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 11 13 14 15 16 18 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:41:10.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 11 13 14 15 16 17 18 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:41:10.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 9 10 11 12 13 14 15 16 17 18 21 22 23 24 25 26 27 28 29 30 31 32 33 (34) 35 36 37 38 ]
2014-03-18 11:41:14.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 9 10 11 12 13 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 (34) 35 36 37 38 ]
2014-03-18 11:41:14.000 AM kernel[0]: AICPUPMI: CPU C6-Cores [ 0 ]
2014-03-18 11:41:35.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:43:25.000 AM kernel[0]: AICPUPMI: CPU C6-Cores [ 0 2 ]
2014-03-18 11:44:01.000 AM kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 ]
2014-03-18 11:44:02.000 AM kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 3 ]
2014-03-18 11:51:30.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 ]

Console filtered by "XCPM":

2014-03-18 11:12:38.000 AM kernel[0]: XCPM: registered
2014-03-18 11:12:39.000 AM kernel[0]: IOPPF: XCPM mode
2014-03-18 11:40:30.000 AM kernel[0]: XCPM: registered
2014-03-18 11:40:30.000 AM kernel[0]: IOPPF: XCPM mode

And "sysctl machdep.xcpm" in terminal:

machdep.xcpm.mode: 1
machdep.xcpm.asserts_enabled: 0
machdep.xcpm.asserts_traced: 0
machdep.xcpm.cpu_wakeup_energy_cost_selector: 0
machdep.xcpm.disable_quiesce: 0
machdep.xcpm.mp_match: 0
machdep.xcpm.disable_idle_self_select: 0
machdep.xcpm.mp_load_txfr_coeff: 128
machdep.xcpm.scalability_cpi_threshold: 4
machdep.xcpm.scalability_cpi_demotion_threshold: 5
machdep.xcpm.scalability_reeval_interval: 1000
machdep.xcpm.scalability_eval_ratio_min: 17
machdep.xcpm.scalability_detection_enabled: 0
machdep.xcpm.hard_plimit_max_100mhz_ratio: 38
machdep.xcpm.hard_plimit_min_100mhz_ratio: 8
machdep.xcpm.soft_plimit_max_100mhz_ratio: 38
machdep.xcpm.soft_plimit_min_100mhz_ratio: 8
machdep.xcpm.ratio_changes_hf: 2
machdep.xcpm.ratio_changes_lf: 0
machdep.xcpm.ratio_change_limited: 1
machdep.xcpm.ratio_change_hf_limit: 2
machdep.xcpm.ratio_change_lf_limit: 1
machdep.xcpm.ratio_change_ratelimit_ns: 500000
machdep.xcpm.ratio_changes_total: 1097050
machdep.xcpm.maxbusdelay: 4294967295
machdep.xcpm.maxintdelay: 0
machdep.xcpm.mbd_mode: 1
machdep.xcpm.mbd_applications: 3127
machdep.xcpm.mbd_relaxations: 3127
machdep.xcpm.forced_idle_ratio: 100
machdep.xcpm.forced_idle_period: 30000000
machdep.xcpm.deep_idle_log: 0
machdep.xcpm.qos_txfr: 1
machdep.xcpm.q_migration_ttd_min: 1000000
machdep.xcpm.q_migration_ttd_max: 100000000
machdep.xcpm.preidle_spin_tsc: 0
machdep.xcpm.qos_ratio_change_limited: 0
machdep.xcpm.qos_ratio_change_hf_limit: 8
machdep.xcpm.qos_ratio_change_lf_limit: 1
machdep.xcpm.qos_ratelimiting_enabled: 1
machdep.xcpm.quiesce_trace: 0
machdep.xcpm.deep_idle_count: 0
machdep.xcpm.deep_idle_last_stats: n/a
machdep.xcpm.deep_idle_total_stats: n/a

Here is my clover config (config.plist) (only thing different is serial number). Also note, some things I added which you probably don't need are the theme, options to hide some boot options, and ATI patch for full resolution boot menu, you may remove them if they don't apply:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>ACPI</key>
	<dict>
		<key>DSDT</key>
		<dict>
			<key>Debug</key>
			<false/>
			<key>ReuseFFFF</key>
			<false/>
			<key>Name</key>
			<string>DSDT.aml</string>
			<key>Fixes</key>
			<dict>
				<key>AddDTGP_0001</key>
				<true/>
				<key>AddMCHC_0008</key>
				<false/>
				<key>FakeLPC_0020</key>
				<false/>
				<key>FixAirport_4000</key>
				<true/>
				<key>FixDarwin_0002</key>
				<false/>
				<key>FixDisplay_0100</key>
				<true/>
				<key>FixFirewire_0800</key>
				<true/>
				<key>FixHDA_8000</key>
				<true/>
				<key>FixHPET_0010</key>
				<true/>
				<key>FixIDE_0200</key>
				<false/>
				<key>FixIPIC_0040</key>
				<true/>
				<key>FixLAN_2000</key>
				<true/>
				<key>FixSATA_0400</key>
				<false/>
				<key>FixSBUS_0080</key>
				<false/>
				<key>FixShutdown_0004</key>
				<true/>
				<key>FixUSB_1000</key>
				<false/>
				<key>NewWay_80000000</key>
				<true/>
				<key>FixRegions_10000000</key>
				<true/>
				<key>FIX_RTC_20000</key>
				<true/>
				<key>FiX_TMR_40000</key>
				<true/>
				<key>AddIMEI_80000</key>
				<true/>
				<key>FIX_INTELGFX_100000</key>
				<false/>
				<key>FiX_WAK_200000</key>
				<true/>
				<key>DeleteUnused_400000</key>
				<true/>
				<key>FIX_ADP1_800000</key>
				<true/>
				<key>AddPNLF_1000000</key>
				<true/>
				<key>FIX_S3D_2000000</key>
				<true/>
				<key>FIX_ACST_4000000</key>
				<true/>
				<key>AddHDMI_8000000</key>
				<true/>
			</dict>
			<key>DropOEM_DSM</key>
			<dict>
				<key>ATI</key>
				<true/>
				<key>Firewire</key>
				<false/>
				<key>HDA</key>
				<false/>
				<key>HDMI</key>
				<false/>
				<key>IDE</key>
				<false/>
				<key>IntelGFX</key>
				<false/>
				<key>LAN</key>
				<true/>
				<key>LPC</key>
				<false/>
				<key>NVidia</key>
				<false/>
				<key>SATA</key>
				<false/>
				<key>SmBUS</key>
				<false/>
				<key>USB</key>
				<false/>
				<key>WIFI</key>
				<false/>
			</dict>
		</dict>
		<key>DropTables</key>
		<array>
			<dict>
				<key>Signature</key>
				<string>DMAR</string>
			</dict>
			<dict>
				<key>Signature</key>
				<string>SSDT</string>
				<key>TableId</key>
				<string>CpuPm</string>
			</dict>
			<dict>
				<key>Signature</key>
				<string>SSDT</string>
				<key>TableId</key>
				<string>Cpu0Ist</string>
			</dict>
		</array>
		<key>HaltEnabler</key>
		<true/>
		<key>SSDT</key>
		<dict>
			<key>DropOem</key>
			<false/>
			<key>Generate</key>
			<dict>
				<key>PStates</key>
				<true/>
				<key>CStates</key>
				<true/>
			</dict>
			<key>EnableC6</key>
			<true/>
		</dict>
	</dict>
	<key>Boot</key>
	<dict>
		<key>DefaultVolume</key>
		<string>MacHDD</string>
		<key>Legacy</key>
		<string>PBR</string>
		<key>Log</key>
		<true/>
		<key>Timeout</key>
		<integer>5</integer>
		<key>XMPDetection</key>
		<string>No</string>
		<key>Secure</key>
		<false/>
	</dict>
	<key>Devices</key>
	<dict>
		<key>Audio</key>
		<dict>
			<key>Inject</key>
			<string>Detect</string>
		</dict>
		<key>FakeID</key>
		<dict>
			<key>ATI</key>
			<string>0x0</string>
			<key>IntelGFX</key>
			<string>0x0</string>
			<key>NVidia</key>
			<string>0x0</string>
			<key>LAN</key>
			<string>0x0</string>
			<key>SATA</key>
			<string>0x0</string>
			<key>WIFI</key>
			<string>0x0</string>
			<key>XHCI</key>
			<string>0x0</string>
			<key>IMEI</key>
			<string>0x0</string>
		</dict>
		<key>UseIntelHDMI</key>
		<false/>
		<key>USB</key>
		<dict>
			<key>Inject</key>
			<true/>
			<key>FixOwnership</key>
			<true/>
			<key>AddClockID</key>
			<true/>
		</dict>
	</dict>
	<key>DisableDrivers</key>
	<array>
		<string>Nothing</string>
	</array>
	<key>GUI</key>
	<dict>
		<key>Language</key>
		<string>en:0</string>
		<key>ScreenResolution</key>
		<string>2560x1440</string>
		<key>Theme</key>
		<string>Mavs Style</string>
		<key>Mouse</key>
		<dict>
			<key>Speed</key>
			<integer>8</integer>
			<key>Enabled</key>
			<true/>
		</dict>
		<key>Scan</key>
		<dict>
			<key>Entries</key>
			<true/>
			<key>Tool</key>
			<false/>
			<key>Legacy</key>
			<false/>
		</dict>
		<key>Hide</key>
		<array>
			<string>Windows</string>
			<string>\EFI\BOOT\BOOTX64.EFI</string>
			<string>Data</string>
			<string>08E76DFD-E781-4608-1909-462A4F462A7A</string>
			<string>WindowsEFI</string>
			<string>InternalEFI</string>
			<string>ExternalEFI</string>
			<string>Recovery HD</string>
		</array>
		<key>Custom</key>
		<dict>
			<key>Entries</key>
			<array>
				<dict>
					<key>VolumeType</key>
					<string>Internal</string>
					<key>Hidden</key>
					<true/>
					<key>Disabled</key>
					<false/>
					<key>Type</key>
					<string>Other</string>
				</dict>
			</array>
			<key>Legacy</key>
			<array>
				<dict>
					<key>Volume</key>
					<string>HD(1,GPT,0190D018-3AA4-4C3A-B962-0BF2C57E0D24,0x28,0x64000)\EFI\BOOT\BOOTX64.efi</string>
					<key>FullTitle</key>
					<string>Windows EFI</string>
					<key>Hidden</key>
					<true/>
					<key>Disabled</key>
					<false/>
					<key>Type</key>
					<string>Windows</string>
				</dict>
			</array>
		</dict>
	</dict>
	<key>Graphics</key>
	<dict>
		<key>PatchVBios</key>
		<true/>
		<key>Inject</key>
		<dict>
			<key>Intel</key>
			<true/>
			<key>ATI</key>
			<false/>
			<key>NVidia</key>
			<false/>
		</dict>
	</dict>
	<key>KernelAndKextPatches</key>
	<dict>
		<key>AppleRTC</key>
		<true/>
		<key>AsusAICPUPM</key>
		<true/>
		<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Name</key>
				<string>AppleAHCIPort</string>
				<key>Find</key>
				<data>
				RXh0ZXJuYWw=
				</data>
				<key>Replace</key>
				<data>
				SW50ZXJuYWw=
				</data>
				<key>Comment</key>
				<string>External icons patch</string>
			</dict>
			<dict>
				<key>Name</key>
				<string>AppleHDA</string>
				<key>Find</key>
				<data>
				ixnUEQ==
				</data>
				<key>Replace</key>
				<data>
				mQjsEA==
				</data>
				<key>Comment</key>
				<string>ALC898 Codec</string>
			</dict>
		</array>
	</dict>
	<key>RtVariables</key>
	<dict>
		<key>LogEveryBoot</key>
		<string>10</string>
		<key>LogLineCount</key>
		<integer>3000</integer>
		<key>MountEFI</key>
		<string>Yes</string>
	</dict>
	<key>SMBIOS</key>
	<dict>
		<key>BoardType</key>
		<integer>11</integer>
		<key>ChassisType</key>
		<integer>6</integer>
		<key>BiosReleaseDate</key>
		<string>02/29/08</string>
		<key>Version</key>
		<string>1.0</string>
		<key>SerialNumber</key>
		<string>BLAHBLAHBLAH</string>
		<key>Manufacturer</key>
		<string>Apple Computer, Inc.</string>
		<key>BoardManufacturer</key>
		<string>Apple Computer, Inc.</string>
		<key>ChassisAssetTag</key>
		<string>Pro-Enclosure</string>
		<key>BiosVendor</key>
		<string>Apple Computer, Inc.</string>
		<key>ChassisManufacturer</key>
		<string>Apple Computer, Inc.</string>
		<key>BiosVersion</key>
		<string>MP31.88Z.006C.B05.0802291410</string>
		<key>Board-ID</key>
		<string>Mac-F42C88C8</string>
		<key>Family</key>
		<string>Mac Pro</string>
		<key>ProductName</key>
		<string>MacPro3,1</string>
		<key>Trust</key>
		<false/>
	</dict>
	<key>SystemParameters</key>
	<dict>
		<key>InjectSystemID</key>
		<true/>
		<key>InjectKexts</key>
		<string>Yes</string>
	</dict>
</dict>
</plist>

P.S. If anyone would like me to write a Clover guide for this board and CPU, let me know.

  • Like 1
Link to comment
Share on other sites
kryten
kryten
Posted
Posted

I honestly didn't do much, Clover is magic! :D I even have a recovery partition and used it to perform a Time Machine restore off of my server (Fedora using Netatalk).

 

BTW, I have a Z87X-UD3H and i5 4670K running the latest 10.9.2

 

Here is everything from Console when I filter by "AICPUPMI":

2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MWAIT C-States.....................: 270624
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_CORE_THREAD_COUNT......(0x35)  : 0x40004
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PLATFORM_INFO..........(0xCE)  : 0x80838F3012200
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PMG_CST_CONFIG_CONTROL.(0xE2)  : 0x1E000007
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PMG_IO_CAPTURE_BASE....(0xE4)  : 0x1814
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: IA32_MPERF.................(0xE7)  : 0x10DA941247
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: IA32_APERF.................(0xE8)  : 0x10C4A14667
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_FLEX_RATIO.............(0x194) : 0xE0000
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_IA32_PERF_STATUS.......(0x198) : 0x23B700002400
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_IA32_PERF_CONTROL......(0x199) : 0x2600
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: IA32_CLOCK_MODULATION......(0x19A) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: IA32_THERM_STATUS..........(0x19C) : 0x883E0000
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: IA32_MISC_ENABLES..........(0x1A0) : 0x850089
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_MISC_PWR_MGMT..........(0x1AA) : 0x1
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x24252626
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x5
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_POWER_CTL..............(0x1FC) : 0x4005F
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_RAPL_POWER_UNIT........(0x606) : 0xA0E03
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKG_POWER_LIMIT........(0x610) : 0xFFD00000EA82
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKG_ENERGY_STATUS......(0x611) : 0x81379C
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKGC3_IRTL.............(0x60a) : 0x8842
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKGC6_IRTL.............(0x60b) : 0x886A
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKGC7_IRTL.............(0x60c) : 0x8891
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x1F40
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PP0_POWER_LIMIT........(0x638) : 0xFFD0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PP0_ENERGY_STATUS......(0x639) : 0x492F03
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PP0_POLICY.............(0x63a) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_CONFIG_TDP_NOMINAL.....(0x648) : 0x22
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_CONFIG_TDP_LEVEL1......(0x649) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_CONFIG_TDP_LEVEL2......(0x64a) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_CONFIG_TDP_CONTROL.....(0x64b) : 0x80000000
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_TURBO_ACTIVATION_RATIO.(0x64c) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: CPU Low Frequency Mode.............: 800 MHz
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: CPU Maximum non-Turbo Frequency....: 3400 MHz
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: CPU Maximum Turbo Frequency........: 3800 MHz
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 34 36 ]
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 ]
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: CPU C7-Cores [ 0 1 2 ]
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 30 34 (36) ]
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 ]
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: CPU C7-Cores [ 0 1 2 3 ]
2014-03-18 11:40:31.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 30 34 36 (37) ]
2014-03-18 11:40:32.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 30 34 35 (36) 37 ]
2014-03-18 11:40:34.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 30 34 35 36 37 (38) ]
2014-03-18 11:40:35.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 28 30 34 35 36 37 38 ]
2014-03-18 11:40:36.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 18 28 30 34 35 36 37 38 ]
2014-03-18 11:40:36.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 10 18 28 30 34 35 36 37 38 ]
2014-03-18 11:40:37.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 10 18 21 28 30 (34) 35 36 37 38 ]
2014-03-18 11:40:40.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 10 18 21 26 28 30 (34) 35 36 37 38 ]
2014-03-18 11:40:41.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 10 18 21 26 27 28 30 34 35 36 37 38 ]
2014-03-18 11:40:51.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 10 18 21 26 27 28 30 32 (34) 35 36 37 38 ]
2014-03-18 11:40:52.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 10 18 21 26 27 28 30 31 32 (34) 35 36 37 38 ]
2014-03-18 11:40:54.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 10 18 21 25 26 27 28 30 31 32 34 35 36 37 38 ]
2014-03-18 11:40:56.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 10 18 21 24 25 26 27 28 30 31 32 (34) 35 36 37 38 ]
2014-03-18 11:40:57.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 10 18 21 24 25 26 27 28 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:40:58.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 10 18 21 23 24 25 26 27 28 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:40:58.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 18 21 23 24 25 26 27 28 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:40:59.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 14 18 21 23 24 25 26 27 28 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:41:02.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 9 10 14 18 21 22 23 24 25 26 27 28 30 31 32 33 (34) 35 36 37 38 ]
2014-03-18 11:41:02.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 14 15 18 21 22 23 24 25 26 27 28 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:41:04.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 11 14 15 18 21 22 23 24 25 26 27 28 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:41:04.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 11 14 15 16 18 21 22 23 24 25 26 27 28 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:41:07.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 11 13 14 15 16 18 21 22 23 24 25 26 27 28 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:41:08.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 11 13 14 15 16 18 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:41:10.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 11 13 14 15 16 17 18 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:41:10.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 9 10 11 12 13 14 15 16 17 18 21 22 23 24 25 26 27 28 29 30 31 32 33 (34) 35 36 37 38 ]
2014-03-18 11:41:14.000 AM kernel[0]: AICPUPMI: CPU P-States [ 8 9 10 11 12 13 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 (34) 35 36 37 38 ]
2014-03-18 11:41:14.000 AM kernel[0]: AICPUPMI: CPU C6-Cores [ 0 ]
2014-03-18 11:41:35.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 ]
2014-03-18 11:43:25.000 AM kernel[0]: AICPUPMI: CPU C6-Cores [ 0 2 ]
2014-03-18 11:44:01.000 AM kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 ]
2014-03-18 11:44:02.000 AM kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 3 ]
2014-03-18 11:51:30.000 AM kernel[0]: AICPUPMI: CPU P-States [ (8) 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 ]
Console filtered by "XCPM":

2014-03-18 11:12:38.000 AM kernel[0]: XCPM: registered
2014-03-18 11:12:39.000 AM kernel[0]: IOPPF: XCPM mode
2014-03-18 11:40:30.000 AM kernel[0]: XCPM: registered
2014-03-18 11:40:30.000 AM kernel[0]: IOPPF: XCPM mode
And "sysctl machdep.xcpm" in terminal:

machdep.xcpm.mode: 1
machdep.xcpm.asserts_enabled: 0
machdep.xcpm.asserts_traced: 0
machdep.xcpm.cpu_wakeup_energy_cost_selector: 0
machdep.xcpm.disable_quiesce: 0
machdep.xcpm.mp_match: 0
machdep.xcpm.disable_idle_self_select: 0
machdep.xcpm.mp_load_txfr_coeff: 128
machdep.xcpm.scalability_cpi_threshold: 4
machdep.xcpm.scalability_cpi_demotion_threshold: 5
machdep.xcpm.scalability_reeval_interval: 1000
machdep.xcpm.scalability_eval_ratio_min: 17
machdep.xcpm.scalability_detection_enabled: 0
machdep.xcpm.hard_plimit_max_100mhz_ratio: 38
machdep.xcpm.hard_plimit_min_100mhz_ratio: 8
machdep.xcpm.soft_plimit_max_100mhz_ratio: 38
machdep.xcpm.soft_plimit_min_100mhz_ratio: 8
machdep.xcpm.ratio_changes_hf: 2
machdep.xcpm.ratio_changes_lf: 0
machdep.xcpm.ratio_change_limited: 1
machdep.xcpm.ratio_change_hf_limit: 2
machdep.xcpm.ratio_change_lf_limit: 1
machdep.xcpm.ratio_change_ratelimit_ns: 500000
machdep.xcpm.ratio_changes_total: 1097050
machdep.xcpm.maxbusdelay: 4294967295
machdep.xcpm.maxintdelay: 0
machdep.xcpm.mbd_mode: 1
machdep.xcpm.mbd_applications: 3127
machdep.xcpm.mbd_relaxations: 3127
machdep.xcpm.forced_idle_ratio: 100
machdep.xcpm.forced_idle_period: 30000000
machdep.xcpm.deep_idle_log: 0
machdep.xcpm.qos_txfr: 1
machdep.xcpm.q_migration_ttd_min: 1000000
machdep.xcpm.q_migration_ttd_max: 100000000
machdep.xcpm.preidle_spin_tsc: 0
machdep.xcpm.qos_ratio_change_limited: 0
machdep.xcpm.qos_ratio_change_hf_limit: 8
machdep.xcpm.qos_ratio_change_lf_limit: 1
machdep.xcpm.qos_ratelimiting_enabled: 1
machdep.xcpm.quiesce_trace: 0
machdep.xcpm.deep_idle_count: 0
machdep.xcpm.deep_idle_last_stats: n/a
machdep.xcpm.deep_idle_total_stats: n/a
Here is my clover config (config.plist) (only thing different is serial number). Also note, some things I added which you probably don't need are the theme, options to hide some boot options, and ATI patch for full resolution boot menu, you may remove them if they don't apply:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>ACPI</key>
	<dict>
		<key>DSDT</key>
		<dict>
			<key>Debug</key>
			<false/>
			<key>ReuseFFFF</key>
			<false/>
			<key>Name</key>
			<string>DSDT.aml</string>
			<key>Fixes</key>
			<dict>
				<key>AddDTGP_0001</key>
				<true/>
				<key>AddMCHC_0008</key>
				<false/>
				<key>FakeLPC_0020</key>
				<false/>
				<key>FixAirport_4000</key>
				<true/>
				<key>FixDarwin_0002</key>
				<false/>
				<key>FixDisplay_0100</key>
				<true/>
				<key>FixFirewire_0800</key>
				<true/>
				<key>FixHDA_8000</key>
				<true/>
				<key>FixHPET_0010</key>
				<true/>
				<key>FixIDE_0200</key>
				<false/>
				<key>FixIPIC_0040</key>
				<true/>
				<key>FixLAN_2000</key>
				<true/>
				<key>FixSATA_0400</key>
				<false/>
				<key>FixSBUS_0080</key>
				<false/>
				<key>FixShutdown_0004</key>
				<true/>
				<key>FixUSB_1000</key>
				<false/>
				<key>NewWay_80000000</key>
				<true/>
				<key>FixRegions_10000000</key>
				<true/>
				<key>FIX_RTC_20000</key>
				<true/>
				<key>FiX_TMR_40000</key>
				<true/>
				<key>AddIMEI_80000</key>
				<true/>
				<key>FIX_INTELGFX_100000</key>
				<false/>
				<key>FiX_WAK_200000</key>
				<true/>
				<key>DeleteUnused_400000</key>
				<true/>
				<key>FIX_ADP1_800000</key>
				<true/>
				<key>AddPNLF_1000000</key>
				<true/>
				<key>FIX_S3D_2000000</key>
				<true/>
				<key>FIX_ACST_4000000</key>
				<true/>
				<key>AddHDMI_8000000</key>
				<true/>
			</dict>
			<key>DropOEM_DSM</key>
			<dict>
				<key>ATI</key>
				<true/>
				<key>Firewire</key>
				<false/>
				<key>HDA</key>
				<false/>
				<key>HDMI</key>
				<false/>
				<key>IDE</key>
				<false/>
				<key>IntelGFX</key>
				<false/>
				<key>LAN</key>
				<true/>
				<key>LPC</key>
				<false/>
				<key>NVidia</key>
				<false/>
				<key>SATA</key>
				<false/>
				<key>SmBUS</key>
				<false/>
				<key>USB</key>
				<false/>
				<key>WIFI</key>
				<false/>
			</dict>
		</dict>
		<key>DropTables</key>
		<array>
			<dict>
				<key>Signature</key>
				<string>DMAR</string>
			</dict>
			<dict>
				<key>Signature</key>
				<string>SSDT</string>
				<key>TableId</key>
				<string>CpuPm</string>
			</dict>
			<dict>
				<key>Signature</key>
				<string>SSDT</string>
				<key>TableId</key>
				<string>Cpu0Ist</string>
			</dict>
		</array>
		<key>HaltEnabler</key>
		<true/>
		<key>SSDT</key>
		<dict>
			<key>DropOem</key>
			<false/>
			<key>Generate</key>
			<dict>
				<key>PStates</key>
				<true/>
				<key>CStates</key>
				<true/>
			</dict>
			<key>EnableC6</key>
			<true/>
		</dict>
	</dict>
	<key>Boot</key>
	<dict>
		<key>DefaultVolume</key>
		<string>MacHDD</string>
		<key>Legacy</key>
		<string>PBR</string>
		<key>Log</key>
		<true/>
		<key>Timeout</key>
		<integer>5</integer>
		<key>XMPDetection</key>
		<string>No</string>
		<key>Secure</key>
		<false/>
	</dict>
	<key>Devices</key>
	<dict>
		<key>Audio</key>
		<dict>
			<key>Inject</key>
			<string>Detect</string>
		</dict>
		<key>FakeID</key>
		<dict>
			<key>ATI</key>
			<string>0x0</string>
			<key>IntelGFX</key>
			<string>0x0</string>
			<key>NVidia</key>
			<string>0x0</string>
			<key>LAN</key>
			<string>0x0</string>
			<key>SATA</key>
			<string>0x0</string>
			<key>WIFI</key>
			<string>0x0</string>
			<key>XHCI</key>
			<string>0x0</string>
			<key>IMEI</key>
			<string>0x0</string>
		</dict>
		<key>UseIntelHDMI</key>
		<false/>
		<key>USB</key>
		<dict>
			<key>Inject</key>
			<true/>
			<key>FixOwnership</key>
			<true/>
			<key>AddClockID</key>
			<true/>
		</dict>
	</dict>
	<key>DisableDrivers</key>
	<array>
		<string>Nothing</string>
	</array>
	<key>GUI</key>
	<dict>
		<key>Language</key>
		<string>en:0</string>
		<key>ScreenResolution</key>
		<string>2560x1440</string>
		<key>Theme</key>
		<string>Mavs Style</string>
		<key>Mouse</key>
		<dict>
			<key>Speed</key>
			<integer>8</integer>
			<key>Enabled</key>
			<true/>
		</dict>
		<key>Scan</key>
		<dict>
			<key>Entries</key>
			<true/>
			<key>Tool</key>
			<false/>
			<key>Legacy</key>
			<false/>
		</dict>
		<key>Hide</key>
		<array>
			<string>Windows</string>
			<string>\EFI\BOOT\BOOTX64.EFI</string>
			<string>Data</string>
			<string>08E76DFD-E781-4608-1909-462A4F462A7A</string>
			<string>WindowsEFI</string>
			<string>InternalEFI</string>
			<string>ExternalEFI</string>
			<string>Recovery HD</string>
		</array>
		<key>Custom</key>
		<dict>
			<key>Entries</key>
			<array>
				<dict>
					<key>VolumeType</key>
					<string>Internal</string>
					<key>Hidden</key>
					<true/>
					<key>Disabled</key>
					<false/>
					<key>Type</key>
					<string>Other</string>
				</dict>
			</array>
			<key>Legacy</key>
			<array>
				<dict>
					<key>Volume</key>
					<string>HD(1,GPT,0190D018-3AA4-4C3A-B962-0BF2C57E0D24,0x28,0x64000)\EFI\BOOT\BOOTX64.efi</string>
					<key>FullTitle</key>
					<string>Windows EFI</string>
					<key>Hidden</key>
					<true/>
					<key>Disabled</key>
					<false/>
					<key>Type</key>
					<string>Windows</string>
				</dict>
			</array>
		</dict>
	</dict>
	<key>Graphics</key>
	<dict>
		<key>PatchVBios</key>
		<true/>
		<key>Inject</key>
		<dict>
			<key>Intel</key>
			<true/>
			<key>ATI</key>
			<false/>
			<key>NVidia</key>
			<false/>
		</dict>
	</dict>
	<key>KernelAndKextPatches</key>
	<dict>
		<key>AppleRTC</key>
		<true/>
		<key>AsusAICPUPM</key>
		<true/>
		<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Name</key>
				<string>AppleAHCIPort</string>
				<key>Find</key>
				<data>
				RXh0ZXJuYWw=
				</data>
				<key>Replace</key>
				<data>
				SW50ZXJuYWw=
				</data>
				<key>Comment</key>
				<string>External icons patch</string>
			</dict>
			<dict>
				<key>Name</key>
				<string>AppleHDA</string>
				<key>Find</key>
				<data>
				ixnUEQ==
				</data>
				<key>Replace</key>
				<data>
				mQjsEA==
				</data>
				<key>Comment</key>
				<string>ALC898 Codec</string>
			</dict>
		</array>
	</dict>
	<key>RtVariables</key>
	<dict>
		<key>LogEveryBoot</key>
		<string>10</string>
		<key>LogLineCount</key>
		<integer>3000</integer>
		<key>MountEFI</key>
		<string>Yes</string>
	</dict>
	<key>SMBIOS</key>
	<dict>
		<key>BoardType</key>
		<integer>11</integer>
		<key>ChassisType</key>
		<integer>6</integer>
		<key>BiosReleaseDate</key>
		<string>02/29/08</string>
		<key>Version</key>
		<string>1.0</string>
		<key>SerialNumber</key>
		<string>BLAHBLAHBLAH</string>
		<key>Manufacturer</key>
		<string>Apple Computer, Inc.</string>
		<key>BoardManufacturer</key>
		<string>Apple Computer, Inc.</string>
		<key>ChassisAssetTag</key>
		<string>Pro-Enclosure</string>
		<key>BiosVendor</key>
		<string>Apple Computer, Inc.</string>
		<key>ChassisManufacturer</key>
		<string>Apple Computer, Inc.</string>
		<key>BiosVersion</key>
		<string>MP31.88Z.006C.B05.0802291410</string>
		<key>Board-ID</key>
		<string>Mac-F42C88C8</string>
		<key>Family</key>
		<string>Mac Pro</string>
		<key>ProductName</key>
		<string>MacPro3,1</string>
		<key>Trust</key>
		<false/>
	</dict>
	<key>SystemParameters</key>
	<dict>
		<key>InjectSystemID</key>
		<true/>
		<key>InjectKexts</key>
		<string>Yes</string>
	</dict>
</dict>
</plist>
P.S. If anyone would like me to write a Clover guide for this board and CPU, let me know.

 

Thank you so much for providing all the info I asked for. I have a different CPU than yours.(i7 4770k)

I would be grateful if you could write that Clover guide for our board. Just a few more questions :

What BIOS version are you on? F7 or F8. Anything special enabled/disabled in BIOS?

Can you verify CPU temperature and multiplier readings in HWMonitor?

Are the following kext loaded : X86PlatformPlugin.kext and X86PlatformShim.kext and AppleSMBusController.kext and AppleLPC.kext?

You can check kext loading with kextstat.

Thanks.

Link to comment
Share on other sites
dcshoes23
dcshoes23
Posted
Posted

Thank you so much for providing all the info I asked for. I have a different CPU than yours.(i7 4770k)

I would be grateful if you could write that Clover guide for our board. Just a few more questions :

What BIOS version are you on? F7 or F8. Anything special enabled/disabled in BIOS?

Can you verify CPU temperature and multiplier readings in HWMonitor?

Are the following kext loaded : X86PlatformPlugin.kext and X86PlatformShim.kext and AppleSMBusController.kext and AppleLPC.kext?

You can check kext loading with kextstat.

Thanks.

 

I will work on a guide.

 

I have BIOS F7, Optimized Defaults, nothing changed except for boot order and I made it UEFI boot only though you don't really need to do that at all.

 

HWMonitor (ignore the 128 degree SSD, it's not on fire, the SSD doesn't have a temp sensor and the firmware just reports 128):

Screen%20Shot%202014-03-18%20at%203.06.3

 

All of those kexts show up in kextstat.

  • Like 1
Link to comment
Share on other sites
dcshoes23
dcshoes23
Posted
Posted

Gigabyte Z87X-UD3H Mavericks 10.9.2 Clover Guide

 

You can actually test out Clover on your current Chameleon install, just download clover and skip steps 3, 7, and 8. The idea is to get Clover working well on a USB and then when that is all fine, install it to a HDD. I am not sure if you can install it over Chameleon, I just formatted my HDD and did a fresh install to be safe.

 

1 - Before You Start

- You need a working Mac or Hackintosh

-  Download Clover: http://sourceforge.net/projects/cloverefiboot/

-  Download Mavericks from App Store.

-  Make sure you have a 8 GB or greater USB stick

 

2 - Prepare USB stick

- format, 1 partition, Mac OS Extended (Journaled), call is “Clover”

- make sure you click Options and pick GUID Partition Table

- Click “OK” and then “Apply”

 

3 - Copy Maverick to USB

- open terminal and run:

sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Clover --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --no interaction

- it will take a while, make sure that it completes successfully and you see “Copy Complete” and “Done”.

 

4 - Install Clover to USB

- open the Clover installer that you downloaded earlier

- Continue, Continue, **MAKE SURE YOU CHANGE INSTALL LOCATION***, pick your USB as the install location

- Click Customize

- check “Install for UEFI motherboards”

- in Drivers64UEFI subsection choose “CsmVideoDxe-64” and “OsxAptioFixDrv-64” <- this one is most important

- Click Install

- Make sure you see “Installation Complete!”

 

5 - Copy a few things to the USB

- Copy “AppleIntelE1000e.kext” and "FakeSMC.kext" from the first post into “EFI/CLOVER/kexts/10.9” on your USB drive

- Copy Clover installer to the USB

 

6 - Configure Clover

- Edit “EFI/CLOVER/config.plist” (you may want to make a backup of the file before editing it)

- look for “<key>InjectKexts</key>” and make sure the next line is “<string>Yes</string>”

 

7 - Install OSX

- reboot your computer, make sure that your USB stick is in a USB 2.0 port, it won’t show up if it is in a USB 3.0 port

- keep tapping F12 as your computer is turning on until the boot drive selection menu appears

- choose the entry for your USB drive that has “UEFI: “ in front of it, very important!

- *I found that sometimes my UEFI entry wouldn’t show up, what I had to do was plug in another USB drive and I guess the extra delay of that drive allowed the first to be properly detected

- the clover boot menu should now appear, if you are just testing clover and not doing a fresh install of OSX, choose your OSX drive to boot

- if you are installing OSX, choose the “Boot OS X Install from Install OS X Mavericks” option

- the installer should boot fine, go to Disk Utility and format the hard disk that you will be installing OSX onto, choose 1 Partition, call it “Mavericks” or “Macintosh HD” or something that you will remember, click “Options” choose “GUID Partition Table”, click “OK” and then “Apply”

- during install OSX will create the hidden EFI and Recovery partitions

- Quit Disk Utility after the format completes

- Click “Install OS X”

- “Continue”

- “Agree”

- Choose the drive that you just formatted (Mavericks or Macintosh HD or whatever you called it)

- Click “Install”

- Once it reboots, boot off of your USB again

- At the Clover boot menu, highlight “Boot Mac OS X from Mavericks” (or Macintosh HD or whatever you called the drive when you formatted it) and then push the space bar

- Select "Boot without caches"

- Mavericks should boot fine and complete the installation, the network interface may not work at first, just complete the setup and choose that you don’t have an internet connection.

- If you are at the Mavericks desktop, try rebooting from the USB and select “Boot Mac OS X from Mavericks” at the Clover boot menu again

- This time the OS should seem more responsive and ethernet should work, if not, open a terminal and type:

sudo touch /System/Library/Extensions

hit enter and then reboot into the OS again using your USB stick

 

8 - Install Clover to Mavericks Hard Disk

- Run the clover installer that you copied to the USB earlier (if not, redownload it)

- Follow the same steps as in Step 4 but this time choose the hard drive that you installed Mavericks to (this should be selected by default)

- Copy “AppleIntelE1000e.kext” from the first post into “EFI/CLOVER/kexts/10.9” on your USB drive

- Copy config.plist from your USB to /EFI/Clover (*you may want to make a backup of the config.plist that is there already)

- Safely remove your USB stick

- Reboot, this time select the HDD that you installed Mavericks to and make sure it says “UEFI” at the begging of the entry you pick

- Clover Boot menu should now appear, choose Boot Mac OS X from Mavericks” (or Macintosh HD or whatever you called the drive when you formatted it)

 

YOU ARE DONE!

 

* Clover Configurator is a very good tool for editing the config.plist and also can mount the hidden EFI partition after install to HDD

 

- for audio, use the AppleHDA.kext and HDAEnabler1.kext from the first post and install them to /System/Library/Extensions/

 

* I used http://cloverboot.weebly.com as a reference when I first did this, though some steps are different now for the latest version of Clover (most notably, you must install clover to the USB stick AFTER copying Mavericks installer to the USB”

Link to comment
Share on other sites
kryten
kryten
Posted
Posted

@dcshoes23

 

I noticed a couple of things in your screenshot from HWMonitor :

 

CPU Fan 720 rpm --> mine defaults to 1140 rpm so my CPU Cores temps are 20° C with CPU Multiplier x8 CPU Package 800 Mhz. Room temp is 18.3°C

CPU Package 792 Mhz --> mine is CPU Package 800 Mhz. If you have memory which supports XMP enable the profile in BIOS.

 

From "AICPUPMI":

 

2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_IA32_PERF_STATUS.......(0x198) : 0x23B700002400
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_IA32_PERF_CONTROL......(0x199) : 0x2600

2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x24252626

 

I think your system boots in 3500 or 3600 Mhz. It should be 3800 Mhz. Faster boot. Check BIOS.

 

From "AICPUPMI":

 

2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x0

2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0
2014-03-18 11:40:30.000 AM kernel[0]: AICPUPMI: MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0

 

All values are zero yet you seem to have all P-States. Very strange. Don't get me wrong I'm glad you have em but it adds more confusion to the puzzle.

 

I'm going to try Clover on a USB stick some time later this evening to see how far I can get.

Thanks once again for the screenshots. Take your time for the guide. If I were a woman I would have your babies. ;)

 

Edit : Thanks for the guide. That was quick!

Link to comment
Share on other sites
eivinds
eivinds
Posted
Posted

Thank you so much for an awesome guide!

 

I've ran into a problem though, my computer reboots straight after when the login screen is supposed to start.

 

If I do a verbose boot from the clover usb stick and boot into my current mavericks install, it just straight reboots instead of bringing the display up.

 

I'm on a GA-Z87X-UD3H, running i7 4770k and my trusty old GFX gtx 260 with Intel gpu disabled.

 

Will try a repartition/reformat and remove Chameleon for a clean install tomorrow.

 

Edit:

Clover fails to boot my installer. I click enter to start OS X Mavericks Installer and instantly go back to the menu.

Do you need the FakeSMC kext with Clover?

Link to comment
Share on other sites
aliab
aliab
Posted
Posted

Thank you so much for an awesome guide!

 

I've ran into a problem though, my computer reboots straight after when the login screen is supposed to start.

 

If I do a verbose boot from the clover usb stick and boot into my current mavericks install, it just straight reboots instead of bringing the display up.

 

I'm on a GA-Z87X-UD3H, running i7 4770k and my trusty old GFX gtx 260 with Intel gpu disabled.

 

Will try a repartition/reformat and remove Chameleon for a clean install tomorrow.

 

Edit:

Clover fails to boot my installer. I click enter to start OS X Mavericks Installer and instantly go back to the menu.

Do you need the FakeSMC kext with Clover?

Yes!

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...