naiclub Posted August 14, 2013 Share Posted August 14, 2013 Ok. What do you speak? Parla Italaino? hablas español, Voce fala portuges? Parle vou Francais? I prefer speaking in Thailand. Because I was Thailand. Now, I gather, then, will guide for you. Link to comment Share on other sites More sharing options...
Picasso Posted August 18, 2013 Share Posted August 18, 2013 I've tried install kext in different ways. Can someone explain hoy to install a kext step by step without any application? (And delete one please). Appears to be a lot of people don't understand the precious files atached in this forum. Thanks a lot! Link to comment Share on other sites More sharing options...
naiclub Posted August 18, 2013 Share Posted August 18, 2013 10.8.5 waiting for the full release before it. Then it's time to do it now, do not select that 10.8.5 will be released this September. Please be patient is better. 2 Link to comment Share on other sites More sharing options...
veddernick Posted August 31, 2013 Share Posted August 31, 2013 i have icloud log in error can somebody help me? Link to comment Share on other sites More sharing options...
ham4ever Posted August 31, 2013 Share Posted August 31, 2013 how to make intel HD4600 works with SSDT ? or how to inject Device (IGPU) in SSDT ? Link to comment Share on other sites More sharing options...
dcshoes23 Posted September 4, 2013 Share Posted September 4, 2013 how to make intel HD4600 works with SSDT ? or how to inject Device (IGPU) in SSDT ? I am interested in this as well. I have a Z87X-UD3H and ATI HD4890 and can't get past [PCI Configuration Begin] with my video card in, I can boot to safe mode using the internal graphics. Any suggestions? I've tried all of the GraphicEnabler, PCIRootUID, and npci flags and combos. Link to comment Share on other sites More sharing options...
kryten Posted September 4, 2013 Share Posted September 4, 2013 I am interested in this as well. Use the current chameleon mainline version. Info : http://www.insanelymac.com/forum/topic/290783-intel-hd-graphics-4600-haswell-working-displayport/?p=1942974 1 Link to comment Share on other sites More sharing options...
ham4ever Posted September 4, 2013 Share Posted September 4, 2013 I am interested in this as well. I have a Z87X-UD3H and ATI HD4890 and can't get past [PCI Configuration Begin] with my video card in, I can boot to safe mode using the internal graphics. Any suggestions? I've tried all of the GraphicEnabler, PCIRootUID, and npci flags and combos. you can use QE_CI Exotic Patch for ur ATI4890 ... it works in all ATI HD 48xx series cards .. and use latest Chameleon 2.2 svn r2262 it works great with Intel HD4600 adding this chameleon settings <key>GraphicsEnabler</key> <string>Yes</string> <key>IntelAzulFB</key> <string>10</string> change number 10 in IntelAzulFb from 1 to 15 to make hd4600 working goodluck 2 Link to comment Share on other sites More sharing options...
dcshoes23 Posted September 4, 2013 Share Posted September 4, 2013 you can use QE_CI Exotic Patch for ur ATI4890 ... it works in all ATI HD 48xx series cards .. and use latest Chameleon 2.2 svn r2262 it works great with Intel HD4600 adding this chameleon settings <key>GraphicsEnabler</key> <string>Yes</string> <key>IntelAzulFB</key> <string>10</string> change number 10 in IntelAzulFb from 1 to 15 to make hd4600 working goodluck Number 8 seems to work for me, thanks! 10 gave a grey screen with just a mouse cursor. As for my ATI card, I tried using the exotics patch and it made no difference. I'll check the kext manually. 1 Link to comment Share on other sites More sharing options...
ham4ever Posted September 4, 2013 Share Posted September 4, 2013 Number 8 seems to work for me, thanks! 10 gave a grey screen with just a mouse cursor. As for my ATI card, I tried using the exotics patch and it made no difference. I'll check the kext manually. U can try adding ur device ID in amd4800conttoller then rebuild cache and GE=yes 2 Link to comment Share on other sites More sharing options...
dcshoes23 Posted September 4, 2013 Share Posted September 4, 2013 U can try adding ur device ID in amd4800conttoller then rebuild cache and GE=yes That worked, it let me boot and gave me full 2560x1440 but no QE/CI, then I tried the exotic kexts again (which includes ATIRadeonX2000.kext) and everything works, QE/CI and full resolution. I must have not installed the kexts correctly last time :$. Link to comment Share on other sites More sharing options...
ham4ever Posted September 4, 2013 Share Posted September 4, 2013 That worked, it let me boot and gave me full 2560x1440 but no QE/CI, then I tried the exotic kexts again (which includes ATIRadeonX2000.kext) and everything works, QE/CI and full resolution. I must have not installed the kexts correctly last time :$. i am glad it worked 2 Link to comment Share on other sites More sharing options...
dcshoes23 Posted September 5, 2013 Share Posted September 5, 2013 i am glad it worked I'm really happy with this motherboard, seems to work very well with OS X. The only minor issue is that there is a buzzing sound (noise on the line) when there is no sound played for a bit. I remembering having a similar issue on my previous desktop and did fix it somehow. I think it was something to do with preventing the sound card from going to sleep. I'll do some research and if I find a solution, I will post it in this thread. Thanks to the OP and everyone else who has contributed, keep up the awesome work! Link to comment Share on other sites More sharing options...
Picasso Posted September 5, 2013 Share Posted September 5, 2013 Can anybody explain me where I can get the ID Platform, and, please, where do I have to place that string? I was looking for all over the site, but appears to be plenty of pro people! thanks! Link to comment Share on other sites More sharing options...
Gokul Posted September 5, 2013 Share Posted September 5, 2013 The only minor issue is that there is a buzzing sound (noise on the line) when there is no sound played for a bit. I remembering having a similar issue on my previous desktop and did fix it somehow. Would that have something to do with power management of the audio device? Maybe change the system definition. Link to comment Share on other sites More sharing options...
dcshoes23 Posted September 5, 2013 Share Posted September 5, 2013 Would that have something to do with power management of the audio device? Maybe change the system definition. Yep, that's what did the trick. I set it to MacPro3,1. No more buzzing. Now, I've noticed a different issue, I don't think it is related to the system definition change because it seemed to be happening before. As soon as I open Safari, it uses up all of my RAM. OS X starts complaining after a bit that there is no RAM. I have 8GB and nothing else open. As soon as I close Safari, the RAM usage goes back down to normal. Anyone else having this issue? I'm using DP7. Link to comment Share on other sites More sharing options...
ssds Posted September 6, 2013 Share Posted September 6, 2013 i have this board, but can't boot with USB installation pen Can you confirm its possible to boot with USB? thanks Link to comment Share on other sites More sharing options...
ham4ever Posted September 6, 2013 Share Posted September 6, 2013 i have this board, but can't boot with USB installation pen Can you confirm its possible to boot with USB? thanks make sure ur usb is primary partition Link to comment Share on other sites More sharing options...
ssds Posted September 6, 2013 Share Posted September 6, 2013 make sure ur usb is primary partition what you mean? my usb have only 1 partition. This pen work perfect on other hacks i have Link to comment Share on other sites More sharing options...
ham4ever Posted September 6, 2013 Share Posted September 6, 2013 what you mean? my usb have only 1 partition. This pen work perfect on other hacks i have if it works with other hacks then it should work with this mobo , and yes use latest chameleon bootloader ..u are just missing something easy double check Link to comment Share on other sites More sharing options...
ddorbuck Posted September 7, 2013 Share Posted September 7, 2013 Hey guys, I just found this thread. I also have a ga-z87x-ud3h mb with a nvidia gtx570 gfx card. I have been patiently waiting for osx 10.8.5 to be released before I try and migrate my older ga-x58a-ud3h motherboard to this new one. My question is I did a quick boot of my new system using the DP1 of mavericks for testing and got stuck at a black screen, I following the instruction from the first post in this thread on building a usb mavericks boot stick. Now I have "not" updated the bios yet to the latest F6 or the new F7 version from gigabyte. Is there an issue with older bios files and chameleon/mavericks ?? Also are most of you using a ddst file or are you needing this if you are using a external video card and not the built-in video? Thanks for any info. Doug Link to comment Share on other sites More sharing options...
ssds Posted September 7, 2013 Share Posted September 7, 2013 if it works with other hacks then it should work with this mobo , and yes use latest chameleon bootloader ..u are just missing something easy double check Do you have this board? Maybe is some config in Bios. Using a sata disk partition i can boot. I d like to ear some one with the same bord (F7 Bios) boot with any pen. Link to comment Share on other sites More sharing options...
ssds Posted September 7, 2013 Share Posted September 7, 2013 Problem solved Was a bios configuration, i have forced a SD card reader to be treated as CD-ROM. For some reason all usb devices (drives) were treat as CD-ROM too. After put it to auto, everything is working now Great, one problem solved Mavericks installation: After some work around with Graphics, i found that my GTX 670 only boot with GraphicsEnabler=No and using only one Display connected to DVI-Port. Cheers Link to comment Share on other sites More sharing options...
ham4ever Posted September 7, 2013 Share Posted September 7, 2013 Problem solved Was a bios configuration, i have forced a SD card reader to be treated as CD-ROM. For some reason all usb devices (drives) were treat as CD-ROM too. After put it to auto, everything is working now Great, one problem solved Mavericks installation: After some work around with Graphics, i found that my GTX 670 only boot with GraphicsEnabler=No and using only one Display connected to DVI-Port. Cheers haha i knew it is just something easy u left behind , goodluck with other stuff i have no experience in GTX Link to comment Share on other sites More sharing options...
nmano Posted September 7, 2013 Share Posted September 7, 2013 Hi I buy today gtx 680 its work without patch or not ple help me Link to comment Share on other sites More sharing options...
Recommended Posts