UrbanBard Posted August 3, 2013 Share Posted August 3, 2013 There is a lot I don't understand about your system. I built a Hackentosh using "another system" which will remain unnamed. I was able to build the boot stick, although there were times when I had to guess and pray what was the correct action. I was able to Boot into Safe Mode. I ran the post installation but didn't understand what most of the Pandora settings were for. So, better explanations are needed. The Post Installation is not much like "the Other system," so I was whistling in the dark most of the time. Running the Post Installation left me with a number of issues. I was never able to get out of safe mode. No Sound. ACL898 was not available for my board. No Internet. ALXEthernet.kext and AppleIntelE1000e.kext were unavailable. 1080P Display was not selectable, so my screen flickered. My DSDT was ignored. Or I had no idea of where I should have placed it other than the desktop. No doubt I could correct these issues, but I will wait until you get closer to a final product Link to comment Share on other sites More sharing options...
magnifico Posted August 3, 2013 Share Posted August 3, 2013 Pandora's Box is awesome. Better than myHack, IMO The only complaint I have is that its user interface needs a user interface! What difference did you find between my hack and pandora? have you seen my hack thing has inside? Link to comment Share on other sites More sharing options...
Fabio1971 Posted August 4, 2013 Share Posted August 4, 2013 There is a lot I don't understand about your system. I built a Hackentosh using "another system" which will remain unnamed. I was able to build the boot stick, although there were times when I had to guess and pray what was the correct action. I was able to Boot into Safe Mode. I ran the post installation but didn't understand what most of the Pandora settings were for. So, better explanations are needed. The Post Installation is not much like "the Other system," so I was whistling in the dark most of the time. Running the Post Installation left me with a number of issues. I was never able to get out of safe mode. No Sound. ACL898 was not available for my board. No Internet. ALXEthernet.kext and AppleIntelE1000e.kext were unavailable. 1080P Display was not selectable, so my screen flickered. My DSDT was ignored. Or I had no idea of where I should have placed it other than the desktop. No doubt I could correct these issues, but I will wait until you get closer to a final product Hello, I read the post 2 : http://www.insanelymac.com/forum/topic/289758-pandoras-box-beta-2-testing/ Fabio Link to comment Share on other sites More sharing options...
Micky1979 Posted August 4, 2013 Share Posted August 4, 2013 There is a lot I don't understand about your system. I built a Hackentosh using "another system" which will remain unnamed. You are really the person on the photo on your avatar? congratulations .... I'm 16 years old, I hope that at your age still have the desire to play with OSx86! By clicking on the context menu, located on the top bar, when Pandora is running, you can call up the "Help", and read some important things. My DSDT was ignored. Or I had no idea of where I should have placed it other than the desktop. [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] collects your DSDT from your desktop, but Pandora has a specific folder where you put your DSDT.aml (or all of your ACPI tables), the InsanelyBox folder! Attention, during the creation of your USB Installer: Do you want to include your file: RecoveryHDUpdate.dmg, ACPI tables (dsdt.aml, ssdt.aml etc..), or your own custom smbios.plist? > by answering Yes, all that is inside InsanelyBox to be taken into account, if you answer is No, then no files will be considered! As above, read the "Help" No Sound. ACL898 was not available for my board. Sorry, not included yet. I hope to expand the ALC family, but unfortunately I do not possess this codec, and I can not even try. After I asked permission to a user here on InsanelyMac (guess who...), maybe I'll do a porting of all the work of ALC Audio, ... but I have not asked until now! No Internet. ALXEthernet.kext and AppleIntelE1000e.kext were unavailable. Have you checked that this is really so? I say this because I have doubts about what you said: in other tools, the kexts are placed in bulk in System/Library/Extensions, but Pandora install many extensions in their natural place: for Ethernet kexts, the natural position is System/Library/Extensions/IONetworkingFamily.kext/IONetworkingFamily.kext/Contents/PlugIns/ ie inside the Plugin folder of IONetworkingFamily.kext. Try to install one of the kexts as you mentioned, and then looks into the path I showed you....for me this works really well! 1080P Display was not selectable, so my screen flickered. This is not really a problem, other tools, including those not nameable, not even have that option, and you can safely hand editing the org.chameleon.boot.plist after having done the USB Installer. However, only with 1080p mentioned by you, unfortunately I can not do anything, what is needed is a complete like 2100x1080 (ex) would be better. Another consideration from this point of view, is that what you like GraphicsMode selection, it is only the resolution of the Thema at boot time, telling the VESA driver which resolution must be used, but unfortunately this varies depending on your video card, and it is not take for granted that your display resolution is still supported. Ultimately other resolutions can be added, but at least communicated with such precision, I would just add that if you really supported. Going to get a new Update, this materializes today Micky Carmine, I saw your PM, but these last few days I have not used my laptop, I had to reinstall everything (I messed up by my self), and just last night I started to restore. After I'll try to accommodate you. Micky Link to comment Share on other sites More sharing options...
C.Frio Posted August 4, 2013 Share Posted August 4, 2013 There is a lot I don't understand about your system. I built a Hackentosh using "another system" which will remain unnamed. I was able to build the boot stick, although there were times when I had to guess and pray what was the correct action. I was able to Boot into Safe Mode. I ran the post installation but didn't understand what most of the Pandora settings were for. So, better explanations are needed. The Post Installation is not much like "the Other system," so I was whistling in the dark most of the time. Running the Post Installation left me with a number of issues. I was never able to get out of safe mode. No Sound. ACL898 was not available for my board. No Internet. ALXEthernet.kext and AppleIntelE1000e.kext were unavailable. 1080P Display was not selectable, so my screen flickered. My DSDT was ignored. Or I had no idea of where I should have placed it other than the desktop. No doubt I could correct these issues, but I will wait until you get closer to a final product Hi... "You are really the person on the photo on your avatar? congratulations .... I'm 16 years old, I hope that at your age still have the desire to play with OSx86! :lol:" thats about the age.. I'm 61... and going to Reno ,NV at end of this month... sorry off topic... --read carefully the help.. --at first don't use dsdt or ssdt c.frio Link to comment Share on other sites More sharing options...
Micky1979 Posted August 4, 2013 Share Posted August 4, 2013 thats about the age.. I'm 61... and going to Reno ,NV at end of this month... 61-16 just reverse it ......going to Link to comment Share on other sites More sharing options...
magnifico Posted August 4, 2013 Share Posted August 4, 2013 Carmine, I saw your PM, but these last few days I have not used my laptop, I had to reinstall everything (I messed up by my self), and just last night I started to restore. After I'll try to accommodate you. Micky After? What is after? Another kext? Link to comment Share on other sites More sharing options...
Micky1979 Posted August 4, 2013 Share Posted August 4, 2013 Guys, Update to v1.34 available on line, please update your Pandora applications, In a few minutes will also be available in the Download section. Micky Link to comment Share on other sites More sharing options...
magnifico Posted August 4, 2013 Share Posted August 4, 2013 Guys, Update to v1.34 available on line, please update your Pandora applications, In a few minutes will also be available in the Download section. Micky news ? what you change ? After try...thz Link to comment Share on other sites More sharing options...
Micky1979 Posted August 4, 2013 Share Posted August 4, 2013 this: Micky 1 Link to comment Share on other sites More sharing options...
magnifico Posted August 4, 2013 Share Posted August 4, 2013 ok...but i have problem with fake smc branch Kozlek , on my clover boot mode UEFI dont work , and i need only branch Slice...but dont worry i am here for test it Link to comment Share on other sites More sharing options...
Micky1979 Posted August 5, 2013 Share Posted August 5, 2013 ok...but i have problem with fake smc branch Kozlek , on my clover boot mode UEFI dont work , and i need only branch Slice...but dont worry i am here for test it Can you give me a link to the Slice's branch? Micky Link to comment Share on other sites More sharing options...
magnifico Posted August 5, 2013 Share Posted August 5, 2013 Can you give me a link to the Slice's branch? Micky of course , Here Link to comment Share on other sites More sharing options...
Micky1979 Posted August 5, 2013 Share Posted August 5, 2013 Hello Micky And 'possible to insert the nVidia drivers in Pandora In the Post Installation section Video Cards Fabio Is my intention, but do not put the whole package, very heavy in MB, but downloading it from Nvidia site: the wifiinjector.kext (put on every Media, DVD or USB) is used to do this (or other similar things) during installation (or in post installation). Only I did not have time to implement this thing yet. But it will be done! Micky of course , Here Link to comment Share on other sites More sharing options...
magnifico Posted August 5, 2013 Share Posted August 5, 2013 but I did not understand, why put the nvidia driver? maybe there are problems during installation for users nvidia 660 and beyond? @miscel have you see branch Slice ? With kozlek branch i have a serius problem , my pc restart and dont work , but if use fake smc the Zar ( slice) work perfect. Ps: of course with clover UEFI , but with enoch dont have problem Hai aggiustato il tuo portatile? Link to comment Share on other sites More sharing options...
Fabio1971 Posted August 5, 2013 Share Posted August 5, 2013 Is my intention, but do not put the whole package, very heavy in MB, but downloading it from Nvidia site: the wifiinjector.kext (put on every Media, DVD or USB) is used to do this (or other similar things) during installation (or in post installation). Only I did not have time to implement this thing yet. But it will be done! Of course the package is too heavy, if you can put the "link" to the nVidia driver Fabio Link to comment Share on other sites More sharing options...
C.Frio Posted August 5, 2013 Share Posted August 5, 2013 Hi tried pandora 134 ,with mavericks....the only problem is on adding "nullcpuP.."at customize before install... seems it does not inject correctly the kext... I'll try again... and on mavericks it does not accept the "genericusbxhci..." have a message .. it is not made by developer..or something similar... c.frio Link to comment Share on other sites More sharing options...
Micky1979 Posted August 5, 2013 Share Posted August 5, 2013 Hi tried pandora 134 ,with mavericks....the only problem is on adding "nullcpuP.."at customize before install... seems it does not inject correctly the kext... I'll try again... and on mavericks it does not accept the "genericusbxhci..." have a message .. it is not made by developer..or something similar... c.frio On Mavericks, if you refear to this message: only means that those who produced GenericXHCI.kext, is not simply a known Developer by Apple. This is not due to Pandora, and it is not an error. And If you see well, the message says: .. but will be still loaded so, all ok. This is caused by Apple is introducing a new security policy on the new OS. For the NullCPU, you can be more specific about error received? Can you show me a logs made, creating USB, or during installation? Micky EDIT You have checked the Credits page of Pandora, under "InsanelyMac Special Thanks"? Link to comment Share on other sites More sharing options...
C.Frio Posted August 6, 2013 Share Posted August 6, 2013 Hi... thank you for the "InsanelyMac Special Thanks".. ".. but will be still loaded" yes I read that...it's ok.... think I didn't choose "nullcpu...."...during the install process..under "customize" I'll try latter again... I got this .txt .if it helps.. c.frio Pandora Installer 08-05-13_1507.txt Link to comment Share on other sites More sharing options...
marco.pisellonio80 Posted August 6, 2013 Share Posted August 6, 2013 Hi all, I tried to make a pandora installer with ML 10.8.4 but it does'nt work. I have updated pandora to last update. Here is my log. Thank you Installazione pandora 10.8.4.txt Link to comment Share on other sites More sharing options...
Micky1979 Posted August 6, 2013 Share Posted August 6, 2013 Hi all, I tried to make a pandora installer with ML 10.8.4 but it does'nt work. I have updated pandora to last update. Here is my log. Thank you Can you try to re-download Pandora from the Download section and retry? From your log, it seems that some scripts do not have the right permissions due to download/decompress process. Let me know! Micky Link to comment Share on other sites More sharing options...
marco.pisellonio80 Posted August 7, 2013 Share Posted August 7, 2013 Hi Micky, I downloaded last Pandora from the link you gave me, but nothing changed. Here is my log. How can I do? Now I'll try from another partition with Lion 10.7 and let you know EDIT: i tried from Lion 10.7.4 but i failed, with a different output. Here is installazione pandora fallita07-08-2013.txt installazione pandora da Lion.txt Link to comment Share on other sites More sharing options...
magnifico Posted August 8, 2013 Share Posted August 8, 2013 Hi mike...but pandoro work also for create a pen drive with mav? Link to comment Share on other sites More sharing options...
thegmanosx Posted August 10, 2013 Share Posted August 10, 2013 The link is broken can't download 1.34 Link to comment Share on other sites More sharing options...
C.Frio Posted August 10, 2013 Share Posted August 10, 2013 Hi try from my dropbox https://www.dropbox.com/sh/00mvq8qtgcqex3d/lqDL6_4CZS c.frio Link to comment Share on other sites More sharing options...
Recommended Posts