Jump to content

[Success] Gigabyte Z87-D3HP -- first Haswell hackintosh?

ameris_cyning

By ameris_cyning,
in OSx86 10.9 (Mavericks)

 Share
345 posts in this topic

Recommended Posts

necrophagous
necrophagous
Posted
Posted

Not working, damn

my my , all ports detected but there's no sound 

sorry my mistake dude

 

 

My z87mx-d3h motherboard has alc892 as well. I have AppleHDA basically working for this system using the instructions I posted here:

http://www.insanelymac.com/forum/topic/290102-compatibility-of-ga-z87mx-d3h-core-i7-4770k/?do=findComment&comment=1935102

i'll try this 

Link to comment
Share on other sites
ameris_cyning
ameris_cyning
Posted
  • Author
Posted

My z87mx-d3h motherboard has alc892 as well. I have AppleHDA basically working for this system using the instructions I posted here:

http://www.insanelymac.com/forum/topic/290102-compatibility-of-ga-z87mx-d3h-core-i7-4770k/?do=findComment&comment=1935102

 

Could ya share your AppleHDA, please?

 

Thank you

Link to comment
Share on other sites
Shasoosh
Shasoosh
Posted
Posted

strange bug in DP3 

sometimes my front USB3 port does not work at all ( let's say like 30 percent of the time) 

and ffs i can't wait for the new line of products from apple as i'm getting fed up by the number of turbo P-States i got like before sleep the 38 and 39 multiplier would not show up while after waking from deep sleep it would , the latest beta UEFI BIOS from gigabyte didn't help either 

Are you experiencing something similar to this? http://www.insanelymac.com/forum/topic/290843-no-usb-power-after-i-boot-into-windows-and-then-into-ml/

Link to comment
Share on other sites
necrophagous
necrophagous
Posted
Posted

that's not it , one of my usb3 front header pin is bent to the point where it almost broken. It seems this motherboard i got is really crappy ( the cmos battery is dead too)

that's it i'm fed up , going to Gigabyte dealer tomorrow i'm thinking of getting a replacement ( or i might take a new z87x-ud3h / z87x-oc) 

Link to comment
Share on other sites
Pike R. Alpha
Pike R. Alpha
Posted
Posted

@q64ceo,

 

What PinConfigurations data do you see in IORegistryExplorer? I have this:

40 d5 37 40 10 40 11 01 20 10 01 01 30 60 01 01 40 90 a1 90 50 90 81 02 60 30 81 01 70 40 21 02 f0 11 11 41 01 e6 45 40 90 61 4b 01

This is what I have in AppleHDAHardwareConfigDriver.kext

<dict>
<key>CodecID</key>
<integer>283904146</integer>
<key>ConfigData</key>
<data>
                                        IUccECFHHUAhRx4RIUcfASFXHCAhVx0QIVce
                                        ASFXHwEhZxwwIWcdYCFnHgEhZx8BIXcc8CF3
                                        HQAhdx4AIXcfQCGHHEAhhx2QIYceoSGHH5Ah
                                        lxxQIZcdkCGXHoEhlx8CIaccYCGnHTAhpx6B
                                        IacfASG3HHAhtx1AIbceISG3HwIh5xyQIecd
                                        YSHnHksh5x8BIfcc8CH3HQAh9x4AIfcfQCEX
                                        HPAhFx0AIRceACEXH0A=
                                        </data>
<key>FuncGroup</key>
<integer>1</integer>
<key>LayoutID</key>
<integer>892</integer>
</dict>

What I also do is that I set PinConfigurations to 00 in my (EFI) device-properties. Oh and I am using AppleHDA.kext v2.5.2.a.30 from DP4. I still have to figure out why property DigitalAudioCapabilities (DisplayPort/HDMI) isn't showing up, and that is most likely why I see some audio related errors with sudo dmesg

 

p.s. Make sure that the right version of AppleHDA.kext is loaded. I ran into this myself some time ago. Took some time before I figured out why audio was working.

  • Like 1
Link to comment
Share on other sites
ameris_cyning
ameris_cyning
Posted
  • Author
Posted

@q64ceo,

 

What PinConfigurations data do you see in IORegistryExplorer? I have this:

40 d5 37 40 10 40 11 01 20 10 01 01 30 60 01 01 40 90 a1 90 50 90 81 02 60 30 81 01 70 40 21 02 f0 11 11 41 01 e6 45 40 90 61 4b 01

This is what I have in AppleHDAHardwareConfigDriver.kext

<dict>
<key>CodecID</key>
<integer>283904146</integer>
<key>ConfigData</key>
<data>
                                        IUccECFHHUAhRx4RIUcfASFXHCAhVx0QIVce
                                        ASFXHwEhZxwwIWcdYCFnHgEhZx8BIXcc8CF3
                                        HQAhdx4AIXcfQCGHHEAhhx2QIYceoSGHH5Ah
                                        lxxQIZcdkCGXHoEhlx8CIaccYCGnHTAhpx6B
                                        IacfASG3HHAhtx1AIbceISG3HwIh5xyQIecd
                                        YSHnHksh5x8BIfcc8CH3HQAh9x4AIfcfQCEX
                                        HPAhFx0AIRceACEXH0A=
                                        </data>
<key>FuncGroup</key>
<integer>1</integer>
<key>LayoutID</key>
<integer>892</integer>
</dict>

What I also do is that I set PinConfigurations to 00 in my (EFI) device-properties. Oh and I am using AppleHDA.kext v2.5.2.a.30 from DP4. I still have to figure out why property DigitalAudioCapabilities (DisplayPort/HDMI) isn't showing up, and that is most likely why I see some audio related errors with sudo dmesg

 

p.s. Make sure that the right version of AppleHDA.kext is loaded. I ran into this myself some time ago. Took some time before I figured out why audio was working.

 

PinConfigurations isn't in my IORegistryExplorer

Link to comment
Share on other sites
René_
René_
Posted
Posted

Working ALC892 on GA-Z87M-D3H for Mavericks. AppleHDA 2.5.2a30, same as Pike R. Alpha
http://cl.ly/Qafx
 
Got it from this site but totally forget which post, sorry no credits my bad :(
 
I was searching so long for a working solution and now have a ton of AppleHDAs which doesn't work.
If I find the link I will give the credits.

===== AUDIO DEVICE INFO ====
Audio controller found! Start Injection
Class code: [0403]
Model name: Unknown HD Audio device [8086:8c20] (rev 04)
Subsystem: [1458:a002]
PciRoot(0x0)/Pci(0x1b,0x0)
device number: 3
=== END AUDIO DEVICE INFO == 

rP.png


[Edit]
Found the link :)
Credits and thanks to oolll
http://www.insanelymac.com/forum/topic/289812-applehda-patching-in-109-mavericks/page-2?do=findComment&comment=1928147
 
Now I only need speedstep.
At the moment only: 
AICPUPMI: CPU P-States [ 8 35 (36) 37 38 39 ]

  • Like 1
Link to comment
Share on other sites
ameris_cyning
ameris_cyning
Posted
  • Author
Posted

Working ALC892 on GA-Z87M-D3H for Mavericks. AppleHDA 2.5.2a30, same as Pike R. Alpha

http://cl.ly/Qafx

 

Got it from this site but totally forget which post, sorry no credits my bad :(

 

I was searching so long for a working solution and now have a ton of AppleHDAs which doesn't work.

If I find the link I will give the credits.

 

 

===== AUDIO DEVICE INFO ====

Audio controller found! Start Injection

Class code: [0403]

Model name: Unknown HD Audio device [8086:8c20] (rev 04)

Subsystem: [1458:a002]

PciRoot(0x0)/Pci(0x1b,0x0)

device number: 3

=== END AUDIO DEVICE INFO == 

 

rP.png

 

 

 

[Edit]

Find the link :)

Credits and thanks to oolll

http://www.insanelymac.com/forum/topic/289812-applehda-patching-in-109-mavericks/page-2?do=findComment&comment=1928147

 

Now I only need speedstep.

At the moment only: 

AICPUPMI: CPU P-States [ 8 35 (36) 37 38 39 ]

I love you

Link to comment
Share on other sites
Shasoosh
Shasoosh
Posted
Posted

Working ALC892 on GA-Z87M-D3H for Mavericks. AppleHDA 2.5.2a30, same as Pike R. Alpha

http://cl.ly/Qafx

 

Got it from this site but totally forget which post, sorry no credits my bad :(

 

I was searching so long for a working solution and now have a ton of AppleHDAs which doesn't work.

If I find the link I will give the credits.

 

 

===== AUDIO DEVICE INFO ====

Audio controller found! Start Injection

Class code: [0403]

Model name: Unknown HD Audio device [8086:8c20] (rev 04)

Subsystem: [1458:a002]

PciRoot(0x0)/Pci(0x1b,0x0)

device number: 3

=== END AUDIO DEVICE INFO == 

 

rP.png

 

 

 

[Edit]

Find the link :)

Credits and thanks to oolll

http://www.insanelymac.com/forum/topic/289812-applehda-patching-in-109-mavericks/page-2?do=findComment&comment=1928147

 

Now I only need speedstep.

At the moment only: 

AICPUPMI: CPU P-States [ 8 35 (36) 37 38 39 ]

Not working on ML 10.8.4 + H87-D3H :(

Link to comment
Share on other sites
dolphans1
dolphans1
Posted
Posted

Not working on ML 10.8.4 + H87-D3H :(

 

I love you

Can someone explain what improvement that HDAkext brings versus what we had before? I just got back from a long vacation so I have not been following?

 

What's the latest DP update release?

 

Thanks....

 

d-1

Link to comment
Share on other sites
eranj
eranj
Posted
Posted

I have this problem even in the installation. therefore I can't install. 4770k and Gigabyte GA-H87-D3H.

I hope you can help!

Bus ratio problem here on a Gigabyte Z87X-UD3H. So close to having this working...

 

Any thoughts on the bus ratio / fast timer tick problem?

 

Link to comment
Share on other sites
c0ercion
c0ercion
Posted
Posted

Working ALC892 on GA-Z87M-D3H for Mavericks. AppleHDA 2.5.2a30, same as Pike R. Alpha

http://cl.ly/Qafx

 

Got it from this site but totally forget which post, sorry no credits my bad :(

 

I was searching so long for a working solution and now have a ton of AppleHDAs which doesn't work.

If I find the link I will give the credits.

 

 

===== AUDIO DEVICE INFO ====

Audio controller found! Start Injection

Class code: [0403]

Model name: Unknown HD Audio device [8086:8c20] (rev 04)

Subsystem: [1458:a002]

PciRoot(0x0)/Pci(0x1b,0x0)

device number: 3

=== END AUDIO DEVICE INFO == 

 

rP.png

 

 

 

[Edit]

Find the link :)

Credits and thanks to oolll

http://www.insanelymac.com/forum/topic/289812-applehda-patching-in-109-mavericks/page-2?do=findComment&comment=1928147

 

Now I only need speedstep.

At the moment only: 

AICPUPMI: CPU P-States [ 8 35 (36) 37 38 39 ]

Thanks for this. 

Btw, I have been struggling with speedstep for a while now as well. I have the MX version of that board and I get the same exact pstates with my 4770k.

My registry dump shows that the OS is recognizing the states I generated with Pike's ssdt script (I can dig up the link if anyone needs it) but is apparently not using them. I've tried using a patched AppleIntelCPUPowerManagement kext, and it removes some errors at boot time, but doesn't fix the states.

 

The PMPatch utility doesn't work on my BIOS... but I've loaded it up in a disassembler and found the location where I believe it is locking MSR 0xE2 (the reason unpatched AICPM.kext causes a panic). Hopefully I will have successful patch within the next few days (limited hacking time with work/gf/etc) and will report back with my results.

  • Like 1
Link to comment
Share on other sites
Shasoosh
Shasoosh
Posted
Posted

Try this one it's for 10.8.5, ALC892: http://www.osx86.net/downloads.php?do=file&id=4098

Working for me with 10.8.5 on my GA Z87M-D3H with ALC892.

I've installed the enabler and the appleHDA but I still get "No output devices found". Any Idea?

 

(BTW, If I install 982 from [url=&quot;http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/&quot;]#####[/url] my audio device is found on layout 1 but there's no sound so I don't think it's the enabler fault)

Link to comment
Share on other sites
mafhper
mafhper
Posted
Posted
I must be doing something wrong. Two days ago I bought a Z87-D3HP and so far the Mavericks could run it. My GPU is the Radeon HD5850 Toxic 1GB.

 

Until I got to the installation screen, but the system was unstable and the monitor going into standby every 30s.

 

Procedure as follows:

 

- I ran the myHack and created using USB Drive Mavericks DP1,

 

- I ran the Chameleon and beyond the options checked by default marked as well:

- Bootloader Standard (as well and another not)

- NPCI = 0x2000 (and again at 0x3000)

- Removed the Graphicsenabler = Yes

- Ticked EnableHDMIAudio = Yes

- Ticked UseAtiROM = Yes

 

- Added the FakeSMC.kext commented

 

There are some DSDT for this board?

How can I generate the mach_kernel to the Mavericks? I searched the BaseSystemResources.pkg the DP1 and not found.

 

What am I doing wrong friends?

:( 

Link to comment
Share on other sites
ameris_cyning
ameris_cyning
Posted
  • Author
Posted

 

I must be doing something wrong. Two days ago I bought a Z87-D3HP and so far the Mavericks could run it. My GPU is the Radeon HD5850 Toxic 1GB.
 
Until I got to the installation screen, but the system was unstable and the monitor going into standby every 30s.
 
Procedure as follows:
 
- I ran the myHack and created using USB Drive Mavericks DP1,
 
- I ran the Chameleon and beyond the options checked by default marked as well:
- Bootloader Standard (as well and another not)
- NPCI = 0x2000 (and again at 0x3000)
- Removed the Graphicsenabler = Yes
- Ticked EnableHDMIAudio = Yes
- Ticked UseAtiROM = Yes
 
- Added the FakeSMC.kext commented
 
There are some DSDT for this board?
How can I generate the mach_kernel to the Mavericks? I searched the BaseSystemResources.pkg the DP1 and not found.
 
What am I doing wrong friends?
:( 

 

 

Have you tried ATY_Init.kext?

Link to comment
Share on other sites
mafhper
mafhper
Posted
Posted
Nops,

 

always used Nvidia GPUs and now I'm a little lost.

 

I do not know all the kext needed, including ATY_Init. I read something about ATIRadeonX3000 and ATI5000controler, but did not find the correct relationship between them.

 

The selection UseATIRom not enough?

The GraphicsEnabler have to stay on Yes or No?

 

Thank you for your attention
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...