PolishOX Posted September 30, 2006 Share Posted September 30, 2006 I bought this webcam from ebay to use with my laptop's xp/vista installations: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...N:IT&ih=014 Windows Drivers install the camera as a Popodino USB PC Camera (ZC0301PL). OSX sees the device when plugged into the usb port as: vimicro PC Camera. On the vimicro site are drivers: http://www.vimicro.com/english/download_n.htm# http://rapidshare.de/files/34984233/301PL-R_MI360.rar.html USB1.1 Digital Webcam driver 08/27/2004 653K (667,798 bytes) MAC Support Vimicro 300K pixel Video camera models: * 301P+HV7131R, * 301P+MI360 Video When you download the package into OSX there is no installation apparently. The files are listed as follows: - ZCamISPLib (some plugin for quicktime) - ZCamIMGLib (some plugin for quicktime) - ZCam Driver - ZCam Digitizer - ZCam Panel - Instructions.txt - Read Me None of the files that seem important have .kext extensions yet the instructions say to copy the files to: /System/Library/Extensions Then reboot. I tried it and that failed. I also tried to add the .kext extension and that failed! I'm looking for any ideas as according to these directions the drivers should work MAC 9.2 and higher. I know it's a long shot but I'd love to find a way to make this work. Any help or ideas would be appreciated! Link to comment Share on other sites More sharing options...
Rammjet Posted September 30, 2006 Share Posted September 30, 2006 The date on the website for the drivers is 08/27/2004 which means they are at least a year before an Intel Mac was produced. The file "301PL-R&MI360\note.txt" says: "2.only used in Mac 9.x" The file "301PL-R&MI360\readme" says: "0302 driver for Mac OS 9.X" and "copy these files to your "System Folder"->"Extensions"". So, let's recap: can't be compatible with Intel OSX because it is too old. Says it is for 9.X Says copy files to "System Folder"->"Extension" (the OS9 config) not /System/Library/Extensions (the OSX config)which is consistent with a pre-OSX configuration Link to comment Share on other sites More sharing options...
PolishOX Posted September 30, 2006 Author Share Posted September 30, 2006 I wasn't sure if there was a way to convert these old drivers into the current configuration... I have emailed the company requesting updated drivers for OSX. Thanks Rammjet. Link to comment Share on other sites More sharing options...
PolishOX Posted October 4, 2006 Author Share Posted October 4, 2006 Update... vimicro has emailed me back... they have agreed to make drivers for 0301PL chipsets for OSX! the driver set will be available to me on Oct. 16th... they are currently on vacation and we so glad I contacted them... More updates later... Link to comment Share on other sites More sharing options...
PolishOX Posted October 10, 2006 Author Share Posted October 10, 2006 Vimicro's head programmer has sent me the drivers that support a vast majority of all cameras on the market using their chip/sensors. They are NOT currently working for my machine but we are troubleshooting when time permits (as they are located in China). The drivers can be found here: http://rapidshare.de/files/36217802/VC0301...8_V101.zip.html More details as I continue to request usb drivers for unsupported devices directly from manufacturers. Sometimes all you gotta do is ask! Link to comment Share on other sites More sharing options...
PaRRoT Posted October 14, 2006 Share Posted October 14, 2006 Thank you for your work. This driver works for my Vimicro USB webcam but... it's all "black". I need to use a lamp pointed to my face for viewing my image in the screen... i tried to use HackTVCarbon (software included) but is always dark... Sorry for my english. Link to comment Share on other sites More sharing options...
PolishOX Posted October 15, 2006 Author Share Posted October 15, 2006 @Parrot Can you tell where you bought your cam and what make/model it is? I'm highly interested as I bought mine on ebay and the seller said he bought them directly from ViMicro... I'm hoping soon to find someone who speaks chinese and english fluently to help me resolve this issue. Link to comment Share on other sites More sharing options...
PaRRoT Posted October 19, 2006 Share Posted October 19, 2006 This is my cam: http://195.110.141.29/commerce/terzo_livel...amp;l=1&p=1 Cam works... but... if I try to use with Skype (and a usb phone) i've a kernel panic This driver doesn't work fine... Link to comment Share on other sites More sharing options...
PolishOX Posted October 19, 2006 Author Share Posted October 19, 2006 I have been working with vimicro to improve their drivers with INTEL MACs and hopefully gain functionality under HACINTOSH... HXR the admin of MACAM project is also now working with them. Our biggest problem is most people don't have a real mac to test with or a vimicro camera... Until recently that is...a friend of mine has a hacintosh and 3-4 real macs running various version of OSX. He just purchased the identical camera to mine and when it arrives we will begin testing soon. With the help of HXR @ MACAM and ViMicro we will soon have working OSX drivers for all vimicro cameras. I need more feedback from guys like you Parrot to help out with this effort. Thanks so much for your feedback I will pass on these results to Hxr and Vimicro! Link to comment Share on other sites More sharing options...
aberracus Posted October 20, 2006 Share Posted October 20, 2006 this is what my usb camera says i really dont know brand or anything, anyopne can help? Vendor-Specific: Version: 0.01 Bus Power (mA): 500 Speed: Up to 12 Mb/sec Product ID: 0x010f Vendor ID: 0x0923 Link to comment Share on other sites More sharing options...
PolishOX Posted October 20, 2006 Author Share Posted October 20, 2006 @Aberracus Have you tried the latest CVS build of Macam? I see you haven't a VENDOR name... Very odd...chances are I can do some research and attempt to ID your camera. It would greatly help me if you could post an image of ur cam if possible... Btw nice to finally cross paths with you... @Aberracus Check it out son: http://webcam-osx.sourceforge.net/cameras/camera.php?id=296 Which of these is your cam? http://www.conceptronic.nl/site/DesktopDef...20&grp=2020 http://tienda.futurebooth.com/images/CMOBICAM-la.jpg http://download.tulip.com/support/Conceptr...CMobiCam_ML.pdf I have found the manual to your cam and sent the links and info to HXR of macam. Any information I receive I will post here. With me helping HXR I am sure more cams will have support for OSX in the very near future. In my other internet life I am what we commonly refer to as a: "SCANNER" See yas soon with more updates! Link to comment Share on other sites More sharing options...
OSX86tester Posted October 20, 2006 Share Posted October 20, 2006 i bought the wanna be isight as well as own the real isight. the wannabe isight made by vimicro works like a charm on the pc. nuked osx so im not sure if ill be testing it on osx. I do know isightr on dell laptops donot work!. Due to stupid firewire needing 12volts, so dont bother wasting your time on that. as far as vimicro goes. I thought the webcam sourceforge was legit enough? Link to comment Share on other sites More sharing options...
PolishOX Posted October 20, 2006 Author Share Posted October 20, 2006 @aberracus Here is the answer from hxr @ macam: That camera should work fine with macam, probably even 0.8.8.Thanks for the update, Harald <http://sourceforge.net/users/hxr> Link to comment Share on other sites More sharing options...
PaRRoT Posted October 25, 2006 Share Posted October 25, 2006 Our biggest problem is most people don't have a real mac to test with or a vimicro camera... I've a Mac mini Intel and a vimicro camera... Link to comment Share on other sites More sharing options...
PolishOX Posted October 28, 2006 Author Share Posted October 28, 2006 What version of OSX are you running and what model vimicro camera do you own? Is the camera currently working and where did you obtain drivers? Would you be willing to test new drivers or not? Link to comment Share on other sites More sharing options...
Miss Arebee Posted January 5, 2007 Share Posted January 5, 2007 Hello to everyone.. I've been offered a webcam: vimicro, recognised by my ibook G4, Tiger 10.4.8 as this: There's a minidisk with drivers for windows in the box, but hrmm.. Being a mac user those are really unuseful.. I've tried Macam, IOExpert... And many other drivers for mac... The ones on the vimicro website for mac are simply not available anymore.. Does anyone have an idea on which driver I could use for the webcam to "become" compatible? Thank you by advance.. Raphaële Link to comment Share on other sites More sharing options...
zu1u Posted January 7, 2007 Share Posted January 7, 2007 I also tryied macam with no success it just tells me there's no webcam connected i have a Genius VideoCam Look In the System Profiler i have the following: USB camera: Version: 1.01 Bus Power (mA): 500 Speed: Up to 12 Mb/sec Product ID: 0x60b0 Vendor ID: 0x0c45 can anyone help? Link to comment Share on other sites More sharing options...
paco.iñigo Posted March 8, 2007 Share Posted March 8, 2007 hi, i am having the same problem as you are, I have searched tons of webpages concerning this. But it seems that luck is not on my side. Have you found a solution to this problem? I, too, have bought a vimicro web camera with exactly the same specifications as you do. If you found a driver pls tell me so. thanks very much. Paco Hello to everyone.. I've been offered a webcam: vimicro, recognised by my ibook G4, Tiger 10.4.8 as this: There's a minidisk with drivers for windows in the box, but hrmm.. Being a mac user those are really unuseful.. I've tried Macam, IOExpert... And many other drivers for mac... The ones on the vimicro website for mac are simply not available anymore.. Does anyone have an idea on which driver I could use for the webcam to "become" compatible? Thank you by advance.. Raphaële Link to comment Share on other sites More sharing options...
PolishOX Posted March 8, 2007 Author Share Posted March 8, 2007 I know the developers of Vimicro directly from China... They can and will make a new driver however, we need to help them with feedback. Keep in mind though that we are dealing with HACINTOSHES so some drivers may be working on real MACS but not on our HACS. So, let me contact those guys and tell them we need drivers for 10.4.4-10.4.8 for PPC and INTEL based MACS. In the meantime, please test your cam with MACAM and post results here... I also know Harold who writes MACAM! Link to comment Share on other sites More sharing options...
rhcpnick Posted March 25, 2007 Share Posted March 25, 2007 Hey everyone, Yeah i'm having the same issues with my vimicro cam. Macam certainly recognizes it, but its a no-go in terms of producing any image I have an iBook and it just appears black on macam v9.0 Link to comment Share on other sites More sharing options...
PolishOX Posted April 28, 2007 Author Share Posted April 28, 2007 My hack is back up and running and I still have my ViMicro cam and contact @ ViMicro. The biggest problem is testing drivers properly would a huge help from someone with more experience than me. Also, if we could get HAROLD from MACAM a ViMicro camera it would be a huge help in having him make full support the cameras using ViMicro chips. I'll try to get Harold in this thread and on this board to see if we make any progress...maybe even invite the ViMicro guy... Link to comment Share on other sites More sharing options...
bonbof Posted May 4, 2007 Share Posted May 4, 2007 Hi, is there any chance to get the Mikomi M6219 webcam working with Macam? It`s a quite popular webcam in the UK, thx to Argos Macam recognizes as a Rainbow Color webcam 5790P USB camera: Version: 1.01 Bus Power (mA): 500 Speed: Up to 12 Mb/sec Product ID: 0x60fe Vendor ID: 0x0c45 Link to comment Share on other sites More sharing options...
geranium Posted July 9, 2007 Share Posted July 9, 2007 Hi, I too have the already mentioned Vimicro camera but I'm a mac mini user with experience in testing and programming. I have tried almost any driver I could find (including compiling CVS macam) and none work. If anyone needs testing from a mac user with testing experience than you can count on me. PC Camera: Version: 1.00 Bus Power (mA): 500 Speed: Up to 12 Mb/sec Manufacturer: Vimicro Corp. Product ID: 0x307b Vendor ID: 0x0ac8 Link to comment Share on other sites More sharing options...
michy Posted February 2, 2008 Share Posted February 2, 2008 Hi! Just wanted to know if anyone has an update on the Vimicro webcams? Thanks! Link to comment Share on other sites More sharing options...
Dag0n Posted February 8, 2008 Share Posted February 8, 2008 Hi! Just wanted to know if anyone has an update on the Vimicro webcams? Thanks! http://www.vimicro.com/english/product/pc003.htm there is osx drivers if its an official vimicro cam. Link to comment Share on other sites More sharing options...
Recommended Posts