xpamamadeus Posted September 7, 2013 Author Share Posted September 7, 2013 Ah yes sorry .. DATE: 2013-09-07 TIME: 23:10:48 ------------------------------- 0:100 0:100 MemLog inited, TSC freq: 3199943100 0:100 0:000 0:100 0:000 Starting rEFIt rev 1958 on American Megatrends EFI 0:100 0:000 SelfDevicePath=PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0)/HD(1,GPT,87AAEC5D-29A4-4BD8-B102-47B998B61963,0x28,0x64000) @DA228198 0:100 0:000 SelfDirPath = \EFI\BOOT 0:100 0:000 Total Memory Slots Count = 8 0:100 0:000 Type 17 Index = 0 0:100 0:000 SmbiosTable.Type17->Speed = 1600 0:100 0:000 SmbiosTable.Type17->Size = 4096 0:100 0:000 Type 17 Index = 1 0:100 0:000 Ignoring insane frequency value 0MHz 0:100 0:000 SmbiosTable.Type17->Speed = 0 0:100 0:000 SmbiosTable.Type17->Size = 0 0:100 0:000 Type 17 Index = 2 0:100 0:000 SmbiosTable.Type17->Speed = 1600 0:100 0:000 SmbiosTable.Type17->Size = 4096 0:100 0:000 Type 17 Index = 3 0:100 0:000 Ignoring insane frequency value 0MHz 0:100 0:000 SmbiosTable.Type17->Speed = 0 0:100 0:000 SmbiosTable.Type17->Size = 0 0:100 0:000 Type 17 Index = 4 0:100 0:000 SmbiosTable.Type17->Speed = 1600 0:100 0:000 SmbiosTable.Type17->Size = 4096 0:100 0:000 Type 17 Index = 5 0:100 0:000 Ignoring insane frequency value 0MHz 0:100 0:000 SmbiosTable.Type17->Speed = 0 0:100 0:000 SmbiosTable.Type17->Size = 0 0:100 0:000 Type 17 Index = 6 0:100 0:000 SmbiosTable.Type17->Speed = 1600 0:100 0:000 SmbiosTable.Type17->Size = 4096 0:100 0:000 Type 17 Index = 7 0:100 0:000 Ignoring insane frequency value 0MHz 0:100 0:000 SmbiosTable.Type17->Speed = 0 0:100 0:000 SmbiosTable.Type17->Size = 0 0:100 0:000 Boot status=0 0:100 0:000 Clover revision: 1958 running on System Product Name 0:100 0:000 ... with board RAMPAGE IV EXTREME 0:103 0:003 Found theme magnifico 0:106 0:002 ConfigPlistPath: EFI\CLOVER\config.plist 0:106 0:000 Using OEM config.plist at path: EFI\CLOVER\config.plist 0:107 0:000 Loading early settings 0:107 0:000 timeout set to 5 0:107 0:000 Default theme: magnifico 0:107 0:000 configure Hide entries 0:107 0:000 hide InternalUEFI 0:107 0:000 ....true 0:107 0:000 Hiding volume with string VOLUME_NAME 0:107 0:000 Hiding volume with string VOLUME_UUID 0:107 0:000 Hiding volume with string TODO_HIDE_VOLUME_BY_TYPE/GROUP 0:107 0:000 LoadDrivers() start 0:109 0:002 Starting FSInject-64.efi 0:110 0:000 Using load options 'FSInject-64.efi ' 0:110 0:000 Starting HFSPlus-64.efi 0:110 0:000 Using load options 'HFSPlus-64.efi ' 0:110 0:000 - driver needs connecting 0:110 0:000 Starting OsxAptioFixDrv-64.efi 0:111 0:000 Using load options 'OsxAptioFixDrv-64.efi ' 0:111 0:000 Starting OsxFatBinaryDrv-64.efi 0:111 0:000 Using load options 'OsxFatBinaryDrv-64.efi ' 0:111 0:000 1 drivers needs connecting ... 0:111 0:000 PlatformDriverOverrideProtocol not found. Installing ... Success 0:111 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok 0:923 0:811 LoadDrivers() end 0:923 0:000 SetMaxResolution: found best mode 10: 1920x1200 - set 0:961 0:037 SetScreenResolution: 1920x1200 - already set 0:961 0:000 reinit: self device path=PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0)/HD(1,GPT,87AAEC5D-29A4-4BD8-B102-47B998B61963,0x28,0x64000) 0:961 0:000 new SelfHandle=DA228198 0:961 0:000 CPU Vendor = 756E6547 Model=206D7 0:961 0:000 The CPU supported turbo 0:961 0:000 BrandString = Intel® Core i7-3930K CPU @ 3.20GHz 0:961 0:000 FSBFrequency=118MHz 0:961 0:000 Corrected FSBFrequency=100MHz 0:961 0:000 Vendor/Model/Stepping: 0x756E6547/0x2D/0x7 0:961 0:000 Family/ExtFamily: 0x6/0x0 0:961 0:000 MaxDiv/MinDiv: 32.0/12 0:961 0:000 Turbo: 57/57/57/57 0:961 0:000 Features: 0xBFEBFBFF 0:961 0:000 Threads: 12 0:961 0:000 Cores: 6 0:961 0:000 FSB: 100 MHz 0:961 0:000 CPU: 3800 MHz 0:961 0:000 TSC: 3800 MHz 0:961 0:000 PIS: 400 MHz 0:961 0:000 PCI (00|00:00.00) : 8086 3C00 class=060000 0:961 0:000 PCI (00|00:02.00) : 8086 3C04 class=060400 0:961 0:000 PCI (00|01:00.00) : 10DE 11C0 class=030000 0:961 0:000 Found NVidia model=GeForce GTX 660 0:961 0:000 PCI (00|01:00.01) : 10DE 0E0B class=040300 0:961 0:000 PCI (00|00:01.00) : 8086 3C02 class=060400 0:961 0:000 PCI (00|00:03.00) : 8086 3C08 class=060400 0:961 0:000 PCI (00|00:05.00) : 8086 3C28 class=088000 0:961 0:000 PCI (00|00:05.02) : 8086 3C2A class=088000 0:961 0:000 PCI (00|00:05.04) : 8086 3C2C class=080020 0:961 0:000 PCI (00|00:11.00) : 8086 1D3E class=060400 0:961 0:000 PCI (00|00:16.00) : 8086 1D3A class=078000 0:961 0:000 PCI (00|00:19.00) : 8086 1503 class=020000 0:961 0:000 PCI (00|00:1A.00) : 8086 1D2D class=0C0320 0:961 0:000 PCI (00|00:1C.00) : 8086 1D10 class=060400 0:961 0:000 PCI (00|00:1C.01) : 8086 1D12 class=060400 0:961 0:000 PCI (00|06:00.00) : 1B21 1042 class=0C0330 0:961 0:000 PCI (00|00:1C.02) : 8086 1D14 class=060400 0:961 0:000 PCI (00|07:00.00) : 1B21 1042 class=0C0330 0:961 0:000 PCI (00|00:1C.03) : 8086 1D16 class=060400 0:961 0:000 PCI (00|08:00.00) : 1B21 1042 class=0C0330 0:961 0:000 PCI (00|00:1C.04) : 8086 1D18 class=060400 0:961 0:000 PCI (00|09:00.00) : 1B21 1042 class=0C0330 0:961 0:000 PCI (00|00:1C.05) : 8086 1D1A class=060400 0:961 0:000 PCI (00|0A:00.00) : 1B21 0612 class=010601 0:961 0:000 PCI (00|00:1C.07) : 8086 1D1E class=060400 0:962 0:000 PCI (00|0B:00.00) : 1B21 0612 class=010601 0:962 0:000 PCI (00|00:1D.00) : 8086 1D26 class=0C0320 0:962 0:000 PCI (00|00:1E.00) : 8086 244E class=060401 0:962 0:000 PCI (00|00:1F.00) : 8086 1D41 class=060100 0:962 0:000 PCI (00|00:1F.02) : 8086 1D02 class=010601 0:962 0:000 PCI (00|00:1F.03) : 8086 1D22 class=0C0500 0:962 0:000 ScanSPD() start 0:962 0:000 SMBus CmdReg: 0x1 0:962 0:000 Scanning SMBus [8086:1D22], mmio: 0xFB720004, ioport: 0xF000, hostc: 0x1 1:133 0:171 ScanSPD() end 1:133 0:000 Calibrated TSC frequency =3199943100 =3199MHz 1:133 0:000 Loading main settings 1:133 0:000 Config set ChassisType=0x6 1:133 0:000 Config set CpuType=501 1:133 0:000 found 21 volumes with blockIO 1:133 0:000 0. Volume: 1:133 0:000 PciRoot(0x0)/Pci(0x1C,0x5)/Pci(0x0,0x0)/Sata(0x0,0x0) 1:134 0:000 Result of bootcode detection: bootable Legacy (legacy) 1:134 0:000 Volume 'Whole Disc Boot', OS 'Legacy', Icon(s) 'legacy', GUID = <null guid> 1:134 0:000 1. Volume: 1:134 0:000 PciRoot(0x0)/Pci(0x1C,0x5)/Pci(0x0,0x0)/Sata(0x0,0x0)/HD(1,MBR,0x18DFE6F3,0x800,0x32000) 1:135 0:000 Result of bootcode detection: bootable Windows (vista,win) 1:135 0:000 Volume 'Legacy HD1', OS 'Windows', Icon(s) 'vista,win', GUID = <null guid> 1:135 0:000 2. Volume: 1:135 0:000 PciRoot(0x0)/Pci(0x1C,0x5)/Pci(0x0,0x0)/Sata(0x0,0x0)/HD(2,MBR,0x18DFE6F3,0x32800,0x57513000) 1:136 0:000 Result of bootcode detection: bootable Windows (vista,win) 1:136 0:000 Volume 'Legacy HD2', OS 'Windows', Icon(s) 'vista,win', GUID = <null guid> 1:136 0:000 3. Volume: 1:136 0:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0) 1:137 0:001 Volume 'Whole Disc Boot', OS '', Icon(s) 'legacy', GUID = <null guid> 1:137 0:000 4. Volume: 1:137 0:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x1,0x0) 1:139 0:001 Volume 'Whole Disc Boot', OS '', Icon(s) 'legacy', GUID = <null guid> 1:139 0:000 5. Volume: 1:139 0:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x2,0x0) 1:139 0:000 Volume 'Whole Disc Boot', OS '', Icon(s) 'legacy', GUID = <null guid> 1:139 0:000 6. Volume: 1:139 0:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x3,0x0) 1:140 0:000 Volume 'Whole Disc Boot', OS '', Icon(s) 'legacy', GUID = <null guid> 1:140 0:000 7. Volume: 1:140 0:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0) 1:140 0:000 Volume 'Whole Disc Boot', OS '', Icon(s) 'legacy', GUID = <null guid> 1:140 0:000 8. Volume: 1:140 0:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x5,0x0) 1:140 0:000 found optical drive 1:140 0:000 Volume 'Whole Disc Boot', OS '', Icon(s) 'legacy', GUID = <null guid> 1:140 0:000 9. Volume: 1:140 0:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0)/HD(1,GPT,0A19B9F0-2BBA-4FFD-B664-07DA3C1914BD,0x28,0x64000) 1:141 0:000 Result of bootcode detection: bootable Legacy (legacy) 1:149 0:007 Volume 'EFI', OS 'Legacy', Icon(s) 'legacy', GUID = 0A19B9F0-2BBA-4FFD-B664-07DA3C1914BD 1:149 0:000 10. Volume: 1:149 0:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0)/HD(2,GPT,12E89339-567B-4F8C-B3C1-64A75687CED7,0x64028,0xEDD8260) 1:149 0:000 Volume 'Legacy HD2', OS '', Icon(s) 'legacy', GUID = 12E89339-567B-4F8C-B3C1-64A75687CED7 1:149 0:000 11. Volume: 1:149 0:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0)/HD(3,GPT,B5D8892E-3269-49B4-BFAF-DDE7D99A3442,0xEE3C288,0x40000) 1:152 0:002 Booting OS 10.8.4 1:152 0:000 Volume 'Boot OS X', OS 'ML', Icon(s) 'cougar,mac', GUID = B5D8892E-3269-49B4-BFAF-DDE7D99A3442 1:152 0:000 12. Volume: 1:152 0:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x1,0x0)/HD(1,GPT,2EDD53D4-D4E0-4C85-B288-30E7F9BDDACA,0x28,0x64000) 1:153 0:000 Result of bootcode detection: bootable Legacy (legacy) 1:160 0:007 Volume 'EFI', OS 'Legacy', Icon(s) 'legacy', GUID = 2EDD53D4-D4E0-4C85-B288-30E7F9BDDACA 1:161 0:000 13. Volume: 1:161 0:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x1,0x0)/HD(2,GPT,2A239BB9-261D-45A4-A555-814D94826FBB,0x64028,0xEDD8260) 1:161 0:000 Volume 'Legacy HD2', OS '', Icon(s) 'legacy', GUID = 2A239BB9-261D-45A4-A555-814D94826FBB 1:161 0:000 14. Volume: 1:161 0:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x1,0x0)/HD(3,GPT,DB798CAF-621B-4A14-B7A7-A6D8BA319D50,0xEE3C288,0x40000) 1:164 0:002 Booting OS 10.8.4 1:164 0:000 Volume 'Boot OS X', OS 'ML', Icon(s) 'cougar,mac', GUID = DB798CAF-621B-4A14-B7A7-A6D8BA319D50 1:164 0:000 15. Volume: 1:164 0:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x2,0x0)/HD(1,GPT,4441E4E7-A492-4161-A045-95F39A839F10,0x28,0x64000) 1:165 0:000 Result of bootcode detection: bootable Legacy (legacy) 1:201 0:036 Volume 'EFI', OS 'Legacy', Icon(s) 'legacy', GUID = 4441E4E7-A492-4161-A045-95F39A839F10 1:201 0:000 16. Volume: 1:201 0:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x2,0x0)/HD(2,GPT,754934CD-AFF6-431A-AC1B-EBDE613211A6,0x64028,0x74662D60) 1:201 0:000 Volume 'BuckUp', OS '', Icon(s) '<null string>', GUID = 754934CD-AFF6-431A-AC1B-EBDE613211A6 1:201 0:000 17. Volume: 1:202 0:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x3,0x0)/HD(1,GPT,E7A05F22-9A81-4127-88F2-72E6F50ACBE8,0x28,0x64000) 1:202 0:000 Result of bootcode detection: bootable Windows (vista,win) 1:243 0:040 Volume 'EFI', OS 'Windows', Icon(s) 'vista,win', GUID = E7A05F22-9A81-4127-88F2-72E6F50ACBE8 1:243 0:000 18. Volume: 1:243 0:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x3,0x0)/HD(2,GPT,813244D3-9419-424E-8927-AD441DA0F062,0x64028,0x74662D60) 1:244 0:000 Volume 'DatiMac', OS '', Icon(s) '<null string>', GUID = 813244D3-9419-424E-8927-AD441DA0F062 1:244 0:000 19. Volume: 1:244 0:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0)/HD(1,GPT,87AAEC5D-29A4-4BD8-B102-47B998B61963,0x28,0x64000) 1:245 0:001 Result of bootcode detection: bootable Legacy (legacy) 1:253 0:008 Volume 'EFI', OS 'Legacy', Icon(s) 'legacy', GUID = 87AAEC5D-29A4-4BD8-B102-47B998B61963 1:253 0:000 This is SelfVolume !! 1:253 0:000 20. Volume: 1:253 0:000 PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0)/HD(2,GPT,B4FFD158-6514-4811-BD9B-4279B6390567,0x64028,0xEDD8260) 1:258 0:004 Booting OS 10.8.4 1:258 0:000 Volume 'Mountain', OS 'ML', Icon(s) 'cougar,mac', GUID = B4FFD158-6514-4811-BD9B-4279B6390567 1:260 0:002 Invalidating BuiltinIcons... 1:262 0:001 Using theme 'magnifico' (EFI\CLOVER\themes\magnifico) 1:272 0:010 font WoB_PTMono_10W_grey.png loaded from themedir 1:272 0:000 Font loaded: ImageWidth=176 ImageHeight=288 Ptr=D8962018 1:272 0:000 Font 2 prepared WxH=11x18 CharWidth=10 1:272 0:000 Scanning legacy ... 1:272 0:000 0: 'Whole Disc Boot' (legacy) hidden 1:272 0:000 1: 'Legacy HD1' (vista,win) add legacy 1:278 0:005 Icon 16 (icons\vol_internal_ntfs.icns) not found 1:278 0:000 Theme path EFI\CLOVER\themes\magnifico, ThemeDir=DA1FA158 1:280 0:002 added 'Boot Windows from Legacy HD1' OSType=2 Icon=vista,win 1:280 0:000 2: 'Legacy HD2' (vista,win) add legacy 1:281 0:000 added 'Boot Windows from Legacy HD2' OSType=2 Icon=vista,win 1:281 0:000 3: 'Whole Disc Boot' (legacy) hidden 1:281 0:000 4: 'Whole Disc Boot' (legacy) hidden 1:281 0:000 5: 'Whole Disc Boot' (legacy) hidden 1:281 0:000 6: 'Whole Disc Boot' (legacy) hidden 1:281 0:000 7: 'Whole Disc Boot' (legacy) hidden 1:281 0:000 8: 'Whole Disc Boot' (legacy) hidden 1:281 0:000 9: 'EFI' (legacy) hidden 1:281 0:000 10: 'Legacy HD2' (legacy) hidden 1:281 0:000 11: 'Boot OS X' (cougar,mac) not legacy 1:281 0:000 12: 'EFI' (legacy) hidden 1:281 0:000 13: 'Legacy HD2' (legacy) hidden 1:281 0:000 14: 'Boot OS X' (cougar,mac) not legacy 1:281 0:000 15: 'EFI' (legacy) hidden 1:281 0:000 16: 'BuckUp' (<null string>) hidden 1:281 0:000 17: 'EFI' (vista,win) add legacy 1:282 0:000 added 'Boot Windows from EFI' OSType=2 Icon=vista,win 1:282 0:000 18: 'DatiMac' (<null string>) hidden 1:282 0:000 19: 'EFI' (legacy) hidden 1:282 0:000 20: 'Mountain' (cougar,mac) not legacy 1:282 0:000 Scanning loaders... HideUEFI=Yes 1:282 0:000 0: 'Whole Disc Boot' no file system 1:282 0:000 1: 'Legacy HD1' no file system 1:282 0:000 2: 'Legacy HD2' no file system 1:282 0:000 3: 'Whole Disc Boot' no file system 1:282 0:000 4: 'Whole Disc Boot' no file system 1:282 0:000 5: 'Whole Disc Boot' no file system 1:282 0:000 6: 'Whole Disc Boot' no file system 1:282 0:000 7: 'Whole Disc Boot' no file system 1:282 0:000 8: 'Whole Disc Boot' no file system 1:282 0:000 9: 'EFI' 1:284 0:001 10: 'Legacy HD2' no file system 1:284 0:000 11: 'Boot OS X' 1:287 0:003 HideBadges=6 Volume=Boot OS X 1:288 0:000 Show badge as OSImage 1:288 0:000 added 'Boot Mac OS X from Raid' 1:288 0:000 12: 'EFI' 1:291 0:002 13: 'Legacy HD2' no file system 1:291 0:000 14: 'Boot OS X' 1:293 0:002 HideBadges=6 Volume=Boot OS X 1:293 0:000 Show badge as OSImage 1:294 0:000 added 'Boot Mac OS X from Raid' 1:294 0:000 15: 'EFI' 1:306 0:012 16: 'BuckUp' 1:306 0:000 17: 'EFI' 1:307 0:001 18: 'DatiMac' 1:308 0:000 19: 'EFI' 1:308 0:000 20: 'Mountain' 1:311 0:003 Icon 15 (icons\vol_internal_hfs.icns) not found 1:311 0:000 Theme path EFI\CLOVER\themes\magnifico, ThemeDir=DA1FA158 1:312 0:000 HideBadges=6 Volume=Mountain 1:312 0:000 Show badge as OSImage 1:313 0:000 added 'Boot Mac OS X from Mountain' 1:316 0:002 Checking EFI partition Volume 9 for Clover 1:317 0:001 Checking EFI partition Volume 12 for Clover 1:318 0:001 Checking EFI partition Volume 15 for Clover 1:319 0:001 Checking EFI partition Volume 17 for Clover 1:320 0:001 Checking EFI partition Volume 19 for Clover 1:320 0:000 Found Clover 1:322 0:001 FindBootOptionForFile: DA228198, \EFI\CLOVER\CLOVERX64.EFI 1:322 0:000 BootOrder: 1: Boot0001 1:322 0:000 Searching for: PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0)/HD(1,GPT,87AAEC5D-29A4-4BD8-B102-47B998B61963,0x28,0x64000)/\EFI\CLOVER\CLOVERX64.EFI (Len: 130) 1:322 0:000 and for: HD(1,GPT,87AAEC5D-29A4-4BD8-B102-47B998B61963,0x28,0x64000)/\EFI\CLOVER\CLOVERX64.EFI (Len: 102) 1:322 0:000 FindBootOptionForFile: Not found. 1:324 0:002 found tools\Shell64U.efi 1:327 0:002 FindDefaultEntry ... 1:327 0:000 FindStartupDiskVolume ... 1:327 0:000 GetEfiBootDeviceFromNvram: 1:327 0:000 efi-boot-device-data: PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0)/HD(2,GPT,B4FFD158-6514-4811-BD9B-4279B6390567,0x64028,0xEDD8260) 1:327 0:000 Volume: 'PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0)/HD(2,GPT,B4FFD158-6514-4811-BD9B-4279B6390567,0x64028,0xEDD8260)' 1:327 0:000 LoaderPath: '<null string>' 1:327 0:000 Guid = B4FFD158-6514-4811-BD9B-4279B6390567 1:327 0:000 FindStartupDiskVolume searching ... 1:327 0:000 volume: partition = PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0)/HD(2,GPT,B4FFD158-6514-4811-BD9B-4279B6390567,0x64028,0xEDD8260) 1:327 0:000 searching for that partition 1:327 0:000 found entry 5. 'Boot Mac OS X from Mountain', Volume 'Mountain' 1:327 0:000 Boot redirected to Entry 5. 'Boot Mac OS X from Mountain' 1:327 0:000 DefaultIndex=5 and MainMenu.EntryCount=12 1:411 0:083 GUI ready 13:066 11:655 StartLoader() start 13:070 0:004 Finally: Bus=99998kHz CPU=3199MHz 13:070 0:000 no airport for table 9 13:071 0:001 Injecting user memory modules to SMBIOS 13:071 0:000 Channels: 4 13:071 0:000 Interleave: 0 2 4 6 1 3 5 7 8 10 12 14 9 11 13 15 16 18 20 22 17 19 21 23 13:071 0:000 DIMM1 1600MHz 4096MB 13:071 0:000 mTotalSystemMemory = 4096 13:071 0:000 DIMM2 EMPTY 13:071 0:000 DIMM3 1600MHz 4096MB 13:071 0:000 mTotalSystemMemory = 8192 13:071 0:000 DIMM4 EMPTY 13:071 0:000 DIMM5 EMPTY 13:071 0:000 DIMM6 1600MHz 4096MB 13:071 0:000 mTotalSystemMemory = 12288 13:071 0:000 DIMM7 EMPTY 13:071 0:000 DIMM8 1600MHz 4096MB 13:071 0:000 mTotalSystemMemory = 16384 13:071 0:000 NumberOfMemoryDevices = 8 13:071 0:000 Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000 13:071 0:000 Type20[1]->End = 0x7FFFFF, Type17[2] = 0x3000 13:071 0:000 Type20[2]->End = 0xBFFFFF, Type17[5] = 0x6000 13:071 0:000 Type20[3]->End = 0xFFFFFF, Type17[7] = 0xA000 13:071 0:000 RSDT 0xDC949028 13:071 0:000 FADT from RSDT: 0xDC9490D0 13:071 0:000 XSDT 0xDC949070 13:071 0:000 FADT from XSDT: 0xDC951188 13:071 0:000 Xsdt reallocation done 13:071 0:000 old FADT length=10C 13:072 0:001 DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml 13:074 0:001 Apply DsdtFixMask=0x0000 13:126 0:052 Drop tables from Xsdt, count=6 13:126 0:000 Found table: FACP A M I 13:126 0:000 Found table: APIC A M I 13:126 0:000 Found table: FPDT A M I 13:126 0:000 Found table: SSDT PROC 13:126 0:000 Found table: MCFG OEMMCFG. 13:126 0:000 Found table: HPET A M I 13:126 0:000 corrected XSDT length=84 13:126 0:000 CPUBase=0 and ApicCPUBase=0 ApicCPUNum=12 13:126 0:000 Booting OS 10.8.4 13:126 0:000 EdidDiscovered size=128 13:126 0:000 00 | 00 FF FF FF FF FF FF 00 15 C3 13:126 0:000 10 | 87 18 01 01 01 01 1F 11 01 03 13:126 0:000 20 | 80 34 21 78 EA EF 95 A3 54 4C 13:126 0:000 30 | 9B 26 0F 50 54 A1 08 00 A9 40 13:126 0:000 40 | 81 80 81 40 B3 00 01 01 01 01 13:126 0:000 50 | 01 01 01 01 28 3C 80 A0 70 B0 13:126 0:000 60 | 23 40 30 20 36 00 07 44 21 00 13:126 0:000 70 | 00 1A 00 00 00 FF 00 33 31 31 13:126 0:000 80 | 34 31 30 38 37 0A 20 20 20 20 13:126 0:000 90 | 00 00 00 FD 00 3B 3D 1F 4C 11 13:126 0:000 100 | 00 0A 20 20 20 20 20 20 00 00 13:126 0:000 110 | 00 FC 00 53 32 34 33 31 57 0A 13:126 0:000 120 | 20 20 20 20 20 20 00 AC 70 74 13:126 0:000 NVidia GFX injection not set 13:126 0:000 HDA Controller [10DE:0E0B] :: PciRoot(0x0)/Pci(0x2,0x0)/Pci(0x0,0x1) => HDMI Audio, setting hda-gfx=onboard-1 13:127 0:000 LAN Controller [8086:1503] :: PciRoot(0x0)/Pci(0x19,0x0) 13:127 0:000 stringlength = 358 13:127 0:000 CurrentMode: Width=1920 Height=1200 13:127 0:000 FSInjection:, skipping kext injection (not requested) 13:127 0:000 OnSimpleFileSystem occured 13:127 0:000 - done! 13:131 0:003 Closing log ok ? not ok u are uploading one of clover 0:100 0:000 Starting rEFIt rev 1958 on American Megatrends EFI refit=Clover we need ozmosis one. look at my picture plz. be sure that u have this in prefpane Link to comment Share on other sites More sharing options...
magnifico Posted September 7, 2013 Share Posted September 7, 2013 not ok u are uploading one of clover 0:100 0:000 Starting rEFIt rev 1958 on American Megatrends EFI refit=Clover we need ozmosis one. look at my picture plz. be sure that u have this in prefpane Link to comment Share on other sites More sharing options...
tonydickinson Posted September 8, 2013 Share Posted September 8, 2013 All depends on "How" you installed in first place, "Virgin" install ( meaning not too may kexts in S/L/E and using Retail NOT Distro) Sorry XP for OT (or is it) Hi STLVNUB, Sorry totally OT - Apologies. Are you interested in the thunderbolt version of your board Z77MX-D3H TH, great for your work. I also have an Asus Z77 Sabertooth to let go with an i73770K. Anybody interested please PM me. Link to comment Share on other sites More sharing options...
magnifico Posted September 8, 2013 Share Posted September 8, 2013 Good Morning milj , last night I saw that you were looking for me, but I was in bed sleeping, too tired Link to comment Share on other sites More sharing options...
kn6600 Posted September 8, 2013 Share Posted September 8, 2013 @ XP About DSDT, for HDEF (ALC898) which layout ID you want 0x01, 0x00, 0x00, 0x00 (for nvidia / ati), 0x03, 0x00, 0x00, 0x00 (for HD4000) or with HDAEnabler injection; for INTEL HD4000 wich AAPL,ig-platform-id you want 0x0166000A (default from pjalm) or some other? also do you want to put apple processor section in DSDT? Link to comment Share on other sites More sharing options...
magnifico Posted September 8, 2013 Share Posted September 8, 2013 Milj , have you a time or not ? Link to comment Share on other sites More sharing options...
magnifico Posted September 15, 2013 Share Posted September 15, 2013 Hi Milj ..listen me please my friend...now buy your some mainboard..after you help me ? I wait your news...x79 it is a very fake... :thumbsdown_anim: :thumbsdown_anim: Link to comment Share on other sites More sharing options...
samlikely Posted September 25, 2013 Share Posted September 25, 2013 (edited) Thanks XP for your great guide and modded BIOS! I have run into a problem with my HDMI audio though and hope that someone might be able to help me out. I'm using the GA-Z77X-UD5H, Intel i5 3570K and the HD4000 integrated graphics. I flashed the modded F14 BIOS without HDAEnablerkext, easily completed a fresh install of Mountain Lion 10.8.5, disabled CPU PLL Overvoltage & CSM Support and booted to the desktop without problems. I then used MaciASL to extract the system DSDT and patched it using PJLAM's All-in-one and HD4000 patches. I placed it in EFI->Quo->ACPI->Load and used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 5.5.1 to install the modded AppleHDA.kext and rebooted. Once I rebooted all of my audio options, including HDMI, were present in my system settings. My problem is that when I try to play audio through HDMI to my TV it works for about 1 min and then gets progressively more choppy and distorted. I've tried playing files with VLC, Quicktime and XBMC so I'm confident that the issue isn't the file or the player. I have also tested the cable and TV with the Windows side of my computer and it works perfectly. Also, my audio works fine via the headphone jack and bluetooth. Any idea what could be causing the issue? Is the modded AppleHDA.kext from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] okay to use is this situation? Cheers and thanks for all of your hard work! Problem solved by using this AppleHDA.kext from toleda, thanks for all of your hard work XP! Edited September 25, 2013 by samlikely Link to comment Share on other sites More sharing options...
lboregard Posted October 6, 2013 Share Posted October 6, 2013 hi xpamamadeus, are you working on the update to this bios for mavericks ? im just curious .. thanks in advance! Link to comment Share on other sites More sharing options...
xpamamadeus Posted October 6, 2013 Author Share Posted October 6, 2013 hi xpamamadeus, are you working on the update to this bios for mavericks ? im just curious .. thanks in advance! No sry. I sold out this mbo becouse its not interesting anymore and wanna try hasswell board. No more moding for ud5h from me Link to comment Share on other sites More sharing options...
lboregard Posted October 6, 2013 Share Posted October 6, 2013 got it ... would you "open source" your modded bios, and if possible provide some hints on which changes are required for mavericks ? Link to comment Share on other sites More sharing options...
duc985 Posted October 6, 2013 Share Posted October 6, 2013 the posted bios here works just fine with Mavericks GM. I do not see what special requirements you think we need ? Link to comment Share on other sites More sharing options...
lboregard Posted October 6, 2013 Share Posted October 6, 2013 really? well i haven't tried ... but i remember xpamamadeus mentioning something along those lines (changes for mavericks) ... if not needed then, wohoooo!!!! thanks Link to comment Share on other sites More sharing options...
xpamamadeus Posted October 6, 2013 Author Share Posted October 6, 2013 got it ... would you "open source" your modded bios, and if possible provide some hints on which changes are required for mavericks ? I have nothing to hide all i made its in first post of this thread.. Link to comment Share on other sites More sharing options...
boron Posted October 8, 2013 Share Posted October 8, 2013 Hi Guys Just getting ready to install mavericks. This guide still cool? Link to comment Share on other sites More sharing options...
duc985 Posted October 8, 2013 Share Posted October 8, 2013 can somebody test this BIOS and report back, its upgraded with Ozmosis 816M. https://www.dropbox.com/s/m43n6ombn0k9aby/Z77XUD5HF14_816M.zip i would like to know if Ethernet runs out of the Box with it, i can boot 10.8 and Mavericks fine with it, but had trouble with Ethernet adapters .. Link to comment Share on other sites More sharing options...
xpamamadeus Posted October 8, 2013 Author Share Posted October 8, 2013 can somebody test this BIOS and report back, its upgraded with Ozmosis 816M. https://www.dropbox.com/s/m43n6ombn0k9aby/Z77XUD5HF14_816M.zip i would like to know if Ethernet runs out of the Box with it, i can boot 10.8 and Mavericks fine with it, but had trouble with Ethernet adapters .. U need to install kexts into s/l/e once then will work then reboot. After that u can delete them from s/l/e and will work. Link to comment Share on other sites More sharing options...
duc985 Posted October 8, 2013 Share Posted October 8, 2013 With install you mean copy them to the EFI Partition into the folder under QUO. I did copy the Kext there to fix them missing Ethernet adapter. That works fine. I also tried to remove them and rebooted. No Luck Ethernet Adapters gone again. So there must be something else going on. The FFS are embeded into the ROM. Size fits etc. It looks like somehow they do not get loaded or whatever. Thats why i was asking if somebody could try on another motherboard to verify ... I can live with to Kexts on the EFI partiotion, but i would like to understand whats going on. Link to comment Share on other sites More sharing options...
xpamamadeus Posted October 8, 2013 Author Share Posted October 8, 2013 With install you mean copy them to the EFI Partition into the folder under QUO. I did copy the Kext there to fix them missing Ethernet adapter. That works fine. I also tried to remove them and rebooted. No Luck Ethernet Adapters gone again. So there must be something else going on. The FFS are embeded into the ROM. Size fits etc. It looks like somehow they do not get loaded or whatever. Thats why i was asking if somebody could try on another motherboard to verify ... I can live with to Kexts on the EFI partiotion, but i would like to understand whats going on. Check console and u will see. ionetworking not loaded becouse some {censored} missing. To solve that i added ionetworking to bios but thats bad becouse this kext change with every os update and i didnt upload that version. Soo its best to just install kexts to system/library/extension like it schould be. Link to comment Share on other sites More sharing options...
insmacjo Posted October 9, 2013 Share Posted October 9, 2013 No sry. I sold out this mbo becouse its not interesting anymore and wanna try hasswell board. No more moding for ud5h from me Getting a GA-Z87X-UD5H ? Link to comment Share on other sites More sharing options...
duc985 Posted October 9, 2013 Share Posted October 9, 2013 okay got your point. Makes more sense to have the two networkig Kexts separate from the BIOS. Anyhow my feeling is that the F14 version with 816 runs more stable, which is good ... I do have zero issues so far Link to comment Share on other sites More sharing options...
lboregard Posted October 12, 2013 Share Posted October 12, 2013 okay got your point. Makes more sense to have the two networkig Kexts separate from the BIOS. Anyhow my feeling is that the F14 version with 816 runs more stable, which is good ... I do have zero issues so far hello duc985, how did you prepare the usb with mavericks gm ? did you need the myhack app ? Link to comment Share on other sites More sharing options...
D-an-W Posted October 12, 2013 Share Posted October 12, 2013 Extract createinstallmedia and use the following command after modifying the volume and username to suite... sudo ./createinstallmedia --volume /Volumes/EmptyVolume --applicationpath /Users/Username/Downloads/Install\ OS\ X\ Mavericks.app Link to comment Share on other sites More sharing options...
kdp Posted October 22, 2013 Share Posted October 22, 2013 Will update guide when we Maverick goes final. Now that Mavericks is available for free in the App Store, I wonder if simply downloading it and letting it run just like you would on a regular mac, would work with this clover install? I am currently downloading it this way, and I can't think of any reason why it wouldn't work. Can you? Link to comment Share on other sites More sharing options...
kdp Posted October 23, 2013 Share Posted October 23, 2013 for anyone wondering about this last post, and if it's possible, yes, i just did it. just make sure you use the newest fakesmc or load up clover on a usb just in case. no guarantees, but to reiterate, i just upgraded to 10.9 via the app store default method apple provides, no usb install. Link to comment Share on other sites More sharing options...
Recommended Posts