kdp Posted October 23, 2015 Share Posted October 23, 2015 Never mind my post about not being able to boot the installer usb. I did some reading and saw they changed the USB stack, moving usb ports did the trick. Link to comment Share on other sites More sharing options...
TheRacerMaster Posted October 23, 2015 Share Posted October 23, 2015 Hi, I am having ongoing issues with sleep on El Capitan. Basically, unlike in my Yosemite install, the system wakes when any thing happens to a USB device connected to the computer. This includes mice, keyboards and even the switching on or off of the monitor (when the monitors USB hub is connected to a USB port). I have been using TheRacerMaster script at https://github.com/theracermaster/Gigabyte-GA-Z77X-DSDT-Patch which gets the system booted and works for the most part. TheRacerMaster has offered me a lot of advice over PM and gave me additional DSDT clover patches to try and disable USB waking, but it doesn't work unfortunately I have tried a shed load of configurations in the config.plist but to no avail. I have also tried removing my nvidia graphics card to see if that and the nvidia software that was causing it. I have also tested various BIOS setting configurations; changing the XHCI mode (auto, enabled, smart auto), enabling or disabling EHCI and XHCI hand off modes. Inside OS X all the settings relating to power management are set sop that nothing should wake it. Every time the system enters sleep mode, it can be woken by moving the mouse, pressing the keyboard, plugging in or unplugging a USB device or as said above, switching the monitor on or off. In console, the wake reason are EH01 EH02 or XH01. I am at the end of my tether as sleep is important for me. Anyone got any advice? Have you tried using the SSDT & config.plist generated by the script with Yosemite? Does sleep work then? Link to comment Share on other sites More sharing options...
stuppy_ Posted October 24, 2015 Share Posted October 24, 2015 Have you tried using the SSDT & config.plist generated by the script with Yosemite? Does sleep work then? Hmm, interesting idea. I will try this next time I am at the computer. What do you feel this could rule out? Link to comment Share on other sites More sharing options...
TheRacerMaster Posted October 24, 2015 Share Posted October 24, 2015 Hmm, interesting idea. I will try this next time I am at the computer. What do you feel this could rule out? It'll determine whether it's an issue I can fix with my files that's purely caused by me, or an issue caused by the new USB stack in 10.11. Link to comment Share on other sites More sharing options...
stuppy_ Posted October 24, 2015 Share Posted October 24, 2015 Ah ok with ya. I know I think I have asked you this many many times... Your sleep works as it should right? Does your computer wake on USB input like mine is? If yours does wake on USB input and it is intentional and you like it like that, then have you tried the fixes you sent me to see what effect they have? I just don't understand why I'm having issues. We have the same motherboard so one would assume what works on yours should work for me. I think maybe if you could send those screenshot of your bios set up for me to copy it might be and idea. I'm using F16 mod11 but have used that for ages now including in Yosemite. In fact if you could just send me pretty much all the info you have for your set up, your config.plist, your SSDT's, your bios settings, the exact kexts you're using etc. Maybe just zip your efi partition and send. Just a thought. Link to comment Share on other sites More sharing options...
stuppy_ Posted October 24, 2015 Share Posted October 24, 2015 Ok, I used your scripts and files on my Yosemite installation. The computer will wake with USB devices as it is doing on El Capitan. The way that I was able to stop USB devices from wake Yosemite was to enable Inject and Add ClockID in Devices -> USB. This does not work in El Capitan though. Not sure if that helps at all. Link to comment Share on other sites More sharing options...
TheRacerMaster Posted October 24, 2015 Share Posted October 24, 2015 Ah yes, this makes sense now. 10.11's redesigned USB stack doesn't care for the clock ID property anymore, so it doesn't do anything (and thus, USB wake works fine). Maybe someone can find a workaround for this. Link to comment Share on other sites More sharing options...
stuppy_ Posted October 24, 2015 Share Posted October 24, 2015 Ah right. So this is not something you can fix? Link to comment Share on other sites More sharing options...
TheRacerMaster Posted October 24, 2015 Share Posted October 24, 2015 We could try a DSDT patch. PM me your OEM DSDT. Link to comment Share on other sites More sharing options...
stuppy_ Posted October 26, 2015 Share Posted October 26, 2015 We could try a DSDT patch. PM me your OEM DSDT. PM sent. Thanks Link to comment Share on other sites More sharing options...
D-an-W Posted November 1, 2015 Share Posted November 1, 2015 @TheRacerMaster afaik we have similar hardware but go about things differently so can I please ask if you have any issues with an immediate panic/reboot when waking from sleep with the latest 10.11.2 beta? I had the same issue with public betas of 10.11 but it was fine when the final release came (Foolishly I didn't test 10.11.1 final). Link to comment Share on other sites More sharing options...
TheRacerMaster Posted November 1, 2015 Share Posted November 1, 2015 Currently can't test (7970 doesn't wake from sleep in 10.11), but will try later with HD 4000. Edit: Tested, no kernel panic. Sleep/wake still working OK with HD 4000. 1 Link to comment Share on other sites More sharing options...
D-an-W Posted November 1, 2015 Share Posted November 1, 2015 Thanks, it could be a whole host of things causing it. I don't use a DSDT and also assume I have different settings to you in your Config.plist etc. What I might do is copy your config to USB and see how things behave. Link to comment Share on other sites More sharing options...
stuppy_ Posted November 2, 2015 Share Posted November 2, 2015 So am I the only one using the Z77X-UD5H, El Capitan and Clover and is having trouble with USB waking the system? I have tried without nvidia graphics card. Same issue. I am using the bios version in my sig. Is there an issue with that bios? Arrrgghhh!!! Edit: my board revision is 1.0 btw. Link to comment Share on other sites More sharing options...
D-an-W Posted November 2, 2015 Share Posted November 2, 2015 Mine wakes when I press either the trackpad, mouse or keyboard (All Apple Bluetooth) and also when I press the power button. If I don't fix mDNSResponder it also "dark wakes" (No monitor) every two hours but it is supposed to do that. Link to comment Share on other sites More sharing options...
stuppy_ Posted November 2, 2015 Share Posted November 2, 2015 Mine wakes when I press either the trackpad, mouse or keyboard (All Apple Bluetooth) and also when I press the power button. If I don't fix mDNSResponder it also "dark wakes" (No monitor) every two hours but it is supposed to do that. And I take it that on Yosemite the only way you could wake up was by pressing the power button? TheRacerMaster has tried all sorts of clover patching and even editing a dsdt file and still the bloody thing wakes up when USB devices do anything. My shutdown is also not working properly either. It goes through the shut down procedure, turns off and then springs back to life 5 seconds later. It is literally the only thing stopping me using El Capitan as main OS, and i so want be able to so that I can use the upgraded notes app on my other devices. DOING....MY....TREE IN Link to comment Share on other sites More sharing options...
D-an-W Posted November 2, 2015 Share Posted November 2, 2015 Yosemite & El Capitan work exactly the same other than certain versions of El Capitan panic when waking from boot. Do you have WoL disabled in the BIOS, that was always a favourite for not shutting down correctly... 150717054703.BMP Link to comment Share on other sites More sharing options...
stuppy_ Posted November 2, 2015 Share Posted November 2, 2015 I have always had WoL enabled in bios as I do use it. Everything worked as I wanted it to on Yosemite. The only thing that does seem to be working the same is the bloody USB ports now wake the system whenever anything happens on them. Move a USB mouse, plug something into a port or unplug it, and then sometimes it just wakes on its own with no apparent input. Each time the wake reasons are XH01, EH01 or EH02. Link to comment Share on other sites More sharing options...
D-an-W Posted November 2, 2015 Share Posted November 2, 2015 WoL still works even with that disabled in the BIOS (I use it here too), I will be surprised if disabling that doesn't fix your restart problem. Link to comment Share on other sites More sharing options...
stuppy_ Posted November 2, 2015 Share Posted November 2, 2015 I shall give that a try when I can next summon the strength to wrestle with the wretched beast. thanks. Link to comment Share on other sites More sharing options...
CoBrA2168 Posted November 3, 2015 Share Posted November 3, 2015 Hey guys, I'm looking to try a fresh El Capitan install myself but all of these USB and Sleep issues have me worried. My current version of Yosemite is pretty much perfect. For those with USB/Sleep issues, make sure the "Enable PPL override" or whatever that option is in the CPU settings is disabled. Link to comment Share on other sites More sharing options...
D-an-W Posted November 3, 2015 Share Posted November 3, 2015 With 10.11 final I had no problems running El Capitan once I had edited a plist to allow USB 3.0 to fully work (Had to edit AppleHDA and mDNSResonder also but that has to be done in Yosemite too), my panic from wake issue have only been with beta releases and it could be due to the none DSDT system I run. EDIT: Panic from wake fixed with latest beta. Link to comment Share on other sites More sharing options...
D-an-W Posted November 15, 2015 Share Posted November 15, 2015 I just updated my BIOS with all the latest files using UEFI BIOS Updater (UBU) and so far it's working well. If anyone wants my personal "Mod20" let me know (Use at your own risk of course). Link to comment Share on other sites More sharing options...
CoBrA2168 Posted November 19, 2015 Share Posted November 19, 2015 I just updated my BIOS with all the latest files using UEFI BIOS Updater (UBU) and so far it's working well. If anyone wants my personal "Mod20" let me know (Use at your own risk of course). Are BIOS updates still being created for this board? If so, where are you getting them? I'm running the latest official one (f14) right now. Link to comment Share on other sites More sharing options...
TheRacerMaster Posted November 19, 2015 Share Posted November 19, 2015 Are BIOS updates still being created for this board? If so, where are you getting them? I'm running the latest official one (f14) right now. F16g is the latest beta version (on TweakTown). I use it with some mods (updated OROMs, updated VBIOS, added ASRock FireWire driver & Apple HFSPlus.efi). Link to comment Share on other sites More sharing options...
Recommended Posts