Alcatraz_USMC Posted April 27, 2018 Share Posted April 27, 2018 Hi @Mieze I have problems with RTL8111H on 10.13.4. Kext bad working. Errors in console Ethernet [RealtekRTL8111]: Link up on en0, 100-Megabit, Full-duplex, No flow-control Ethernet [RealtekRTL8111]: Tx stalled? Resetting chipset. ISR=0x80, IMR=0x803f. What me do? Link to comment Share on other sites More sharing options...
Mieze Posted April 27, 2018 Author Share Posted April 27, 2018 Let me guess: ASPM? Take a look at the BIOS setup and make sure that ASPM is either disabled or that the OS has full control over ASPM. Also check that you are using the latest version of the driver. Mieze Link to comment Share on other sites More sharing options...
Alcatraz_USMC Posted April 27, 2018 Share Posted April 27, 2018 ASPM disabled. I tried the latest version with github, compiled myself. No result Link to comment Share on other sites More sharing options...
cshacked87 Posted May 2, 2018 Share Posted May 2, 2018 Hello fellows. I have a similar problem but i have 2 operating systems: first is Windows 10 on #1 SSD drive and second on #2 SSD drive macOS Sierra 10.12.6. My lan card doesn't work when i first booting macOS via Clover. When i first booting with Windows and then restart computer and back to Clover and choose macOS, Realtek starts working. 2018-05-02 16:36:44.291543+0200 0xd5 Default 0x0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: EEE support disabled. 2018-05-02 16:36:44.291549+0200 0xd5 Default 0x0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: RxPoll support enabled. 2018-05-02 16:36:44.291555+0200 0xd5 Default 0x0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: TCP/IPv4 segmentation offload enabled. 2018-05-02 16:36:44.291560+0200 0xd5 Default 0x0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: TCP/IPv6 segmentation offload enabled. 2018-05-02 16:36:44.291564+0200 0xd5 Default 0x0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: TCP/IPv6 checksum offload enabled. 2018-05-02 16:36:44.291570+0200 0xd5 Default 0x0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: Version 2.2.2 using interrupt mitigate value 0x5f51. Please don't support tonymacx86.com! 2018-05-02 16:36:44.291614+0200 0xd5 Default 0x0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: Disable PCIe ASPM. 2018-05-02 16:36:44.306458+0200 0xd5 Default 0x0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: RTL8168H/8111H: (Chipset 29) at 0x<private>, 4c:cc:6a:06:fb:2a 2018-05-02 16:36:48.668473+0200 0x102 Default 0x0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control 2018-05-02 16:38:58.233162+0200 0xd5 Default 0x0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: EEE support disabled. 2018-05-02 16:38:58.233168+0200 0xd5 Default 0x0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: RxPoll support enabled. 2018-05-02 16:38:58.233174+0200 0xd5 Default 0x0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: TCP/IPv4 segmentation offload enabled. 2018-05-02 16:38:58.233180+0200 0xd5 Default 0x0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: TCP/IPv6 segmentation offload enabled. 2018-05-02 16:38:58.233185+0200 0xd5 Default 0x0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: TCP/IPv6 checksum offload enabled. 2018-05-02 16:38:58.233190+0200 0xd5 Default 0x0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: Version 2.2.2 using interrupt mitigate value 0x5f51. Please don't support tonymacx86.com! 2018-05-02 16:38:58.233469+0200 0xd5 Default 0x0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: Disable PCIe ASPM. 2018-05-02 16:38:58.247950+0200 0xd5 Default 0x0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: RTL8168H/8111H: (Chipset 29) at 0x<private>, 4c:cc:6a:06:fb:2a 2018-05-02 16:39:03.820663+0200 0x102 Default 0x0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control Link to comment Share on other sites More sharing options...
mostafix Posted May 28, 2018 Share Posted May 28, 2018 hi nice app Link to comment Share on other sites More sharing options...
nms Posted July 15, 2018 Share Posted July 15, 2018 Mieze, low priority request for comments on flow control. Please. As I see broadcom chips|drivers do flow control negotiation on startup, while realtek ones do not. Link to comment Share on other sites More sharing options...
Mieze Posted July 15, 2018 Author Share Posted July 15, 2018 1 minute ago, nms said: Mieze, low priority request for comments on flow control. Please. As I see broadcom chips|drivers do flow control negotiation on startup, while realtek ones do not. It's already implemented but it might be necessary to select the medium manually as auto-negotiation not always gives you the desired result. Mieze 1 Link to comment Share on other sites More sharing options...
greythorne Posted July 18, 2018 Share Posted July 18, 2018 Hi Mieze, Recently encountered a KP. Please see the specific panic logs. Any help from you greatly appreciated. Thank you. *** Panic Report *** panic(cpu 3 caller 0xffffff800038776f): Kernel trap at 0xffffff7f80bf17d5, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0xffffff81f97b5008, CR3: 0x0000000014cb5000, CR4: 0x00000000003627e0 RAX: 0x0000000000000000, RBX: 0xffffff81ad838000, RCX: 0xffffff81fafebe88, RDX: 0x0000000000000100 RSP: 0xffffff81fafebcc0, RBP: 0xffffff81fafebd40, RSI: 0xffffff8030370000, RDI: 0xffffff81ad838000 R8: 0x0000000000000000, R9: 0x0000000000000001, R10: 0x0000086fc3a7c7ba, R11: 0xffffff8000bebc80 R12: 0xffffff81ad838000, R13: 0x0000000000000000, R14: 0xffffff81f97b5000, R15: 0x0000000000000000 RFL: 0x0000000000010246, RIP: 0xffffff7f80bf17d5, CS: 0x0000000000000008, SS: 0x0000000000000000 Fault CR2: 0xffffff81f97b5008, Error code: 0x0000000000000000, Fault CPU: 0x3, PL: 0, VF: 1 Backtrace (CPU 3), Frame : Return Address 0xffffff81fafeb790 : 0xffffff800026c1c6 0xffffff81fafeb7e0 : 0xffffff8000395274 0xffffff81fafeb820 : 0xffffff8000387544 0xffffff81fafeb890 : 0xffffff800021e1e0 0xffffff81fafeb8b0 : 0xffffff800026bc3c 0xffffff81fafeb9e0 : 0xffffff800026b9fc 0xffffff81fafeba40 : 0xffffff800038776f 0xffffff81fafebbb0 : 0xffffff800021e1e0 0xffffff81fafebbd0 : 0xffffff7f80bf17d5 0xffffff81fafebd40 : 0xffffff7f80bf218c 0xffffff81fafebd60 : 0xffffff7f80bc14ce 0xffffff81fafebd90 : 0xffffff800089ad68 0xffffff81fafebe00 : 0xffffff7f80bc1538 0xffffff81fafebe60 : 0xffffff7f80bc57ac 0xffffff81fafebee0 : 0xffffff800050a665 0xffffff81fafebfa0 : 0xffffff800021d557 Kernel Extensions in backtrace: com.apple.iokit.IONetworkingFamily(3.4)[5A99D802-B477-3D83-9F76-304605479B9F]@0xffffff7f80bb7000->0xffffff7f80bedfff com.insanelymac.IntelMausiEthernet(2.4d0)[6FDD7FE8-3965-3DAC-8997-8F76D32D99E5]@0xffffff7f80bee000->0xffffff7f80c01fff dependency: com.apple.iokit.IONetworkingFamily(3.4)[5A99D802-B477-3D83-9F76-304605479B9F]@0xffffff7f80bb7000 dependency: com.apple.iokit.IOPCIFamily(2.9)[AEA4C7F5-CCB0-338B-B471-CF28A9792522]@0xffffff7f80a50000 Link to comment Share on other sites More sharing options...
Mieze Posted July 21, 2018 Author Share Posted July 21, 2018 (edited) On 7/18/2018 at 4:24 AM, greythorne said: Hi Mieze, Recently encountered a KP. Please see the specific panic logs. Any help from you greatly appreciated. Thank you. *** Panic Report *** panic(cpu 3 caller 0xffffff800038776f): Kernel trap at 0xffffff7f80bf17d5, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0xffffff81f97b5008, CR3: 0x0000000014cb5000, CR4: 0x00000000003627e0 RAX: 0x0000000000000000, RBX: 0xffffff81ad838000, RCX: 0xffffff81fafebe88, RDX: 0x0000000000000100 RSP: 0xffffff81fafebcc0, RBP: 0xffffff81fafebd40, RSI: 0xffffff8030370000, RDI: 0xffffff81ad838000 R8: 0x0000000000000000, R9: 0x0000000000000001, R10: 0x0000086fc3a7c7ba, R11: 0xffffff8000bebc80 R12: 0xffffff81ad838000, R13: 0x0000000000000000, R14: 0xffffff81f97b5000, R15: 0x0000000000000000 RFL: 0x0000000000010246, RIP: 0xffffff7f80bf17d5, CS: 0x0000000000000008, SS: 0x0000000000000000 Fault CR2: 0xffffff81f97b5008, Error code: 0x0000000000000000, Fault CPU: 0x3, PL: 0, VF: 1 Backtrace (CPU 3), Frame : Return Address 0xffffff81fafeb790 : 0xffffff800026c1c6 0xffffff81fafeb7e0 : 0xffffff8000395274 0xffffff81fafeb820 : 0xffffff8000387544 0xffffff81fafeb890 : 0xffffff800021e1e0 0xffffff81fafeb8b0 : 0xffffff800026bc3c 0xffffff81fafeb9e0 : 0xffffff800026b9fc 0xffffff81fafeba40 : 0xffffff800038776f 0xffffff81fafebbb0 : 0xffffff800021e1e0 0xffffff81fafebbd0 : 0xffffff7f80bf17d5 0xffffff81fafebd40 : 0xffffff7f80bf218c 0xffffff81fafebd60 : 0xffffff7f80bc14ce 0xffffff81fafebd90 : 0xffffff800089ad68 0xffffff81fafebe00 : 0xffffff7f80bc1538 0xffffff81fafebe60 : 0xffffff7f80bc57ac 0xffffff81fafebee0 : 0xffffff800050a665 0xffffff81fafebfa0 : 0xffffff800021d557 Kernel Extensions in backtrace: com.apple.iokit.IONetworkingFamily(3.4)[5A99D802-B477-3D83-9F76-304605479B9F]@0xffffff7f80bb7000->0xffffff7f80bedfff com.insanelymac.IntelMausiEthernet(2.4d0)[6FDD7FE8-3965-3DAC-8997-8F76D32D99E5]@0xffffff7f80bee000->0xffffff7f80c01fff dependency: com.apple.iokit.IONetworkingFamily(3.4)[5A99D802-B477-3D83-9F76-304605479B9F]@0xffffff7f80bb7000 dependency: com.apple.iokit.IOPCIFamily(2.9)[AEA4C7F5-CCB0-338B-B471-CF28A9792522]@0xffffff7f80a50000 Driver related kernel panics occur when a driver fails to communicate with the OS, which is definitely not the case for IntelMausiEthernet, or when there is something wrong the system, for example messed up system caches, a broken DSDT or a wrong BIOS setting which causes BIOS code to interfere with the driver. I explained this in detail a dozen times before in this thread. Anyway, fix your system to get rid of the KP! By the way, you posted in the wrong thread. Mieze Edited July 21, 2018 by Mieze 1 Link to comment Share on other sites More sharing options...
andrea99 Posted September 1, 2018 Share Posted September 1, 2018 Hi Mieze! Thanks for you work! I have a problem with a TP-LINK TG-3269 PCI Ethernet Card. It has RTL8169SC Chipset which was supported by [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] till Yosemite and Apple till Snow Leopard. Now I try to install your driver and my ethernet card is not recognized by Mac OS. I tryied to install AppleRTL8169.kext but it doesnt work. Can you help me? Link to comment Share on other sites More sharing options...
Mieze Posted September 1, 2018 Author Share Posted September 1, 2018 @andrea99: Sorry but this chip isn't supported because PCI devices are unable to perform 64bit DMA operations and require a completely different approach for a driver. Mieze Link to comment Share on other sites More sharing options...
andrea99 Posted September 1, 2018 Share Posted September 1, 2018 oh... i just bought it... Do you have a list of gigabit ethernet or wifi adapter for high sierra?? because i have only pci slots free... pci-e is free but graphics card take the space. Link to comment Share on other sites More sharing options...
Mieze Posted September 1, 2018 Author Share Posted September 1, 2018 Sorry but PCI is outdated technology and it doesn't make much sense to use it. Mieze Link to comment Share on other sites More sharing options...
andrea99 Posted September 1, 2018 Share Posted September 1, 2018 okay. i found out this one https://www.tp-link.com/us/download/TL-UE300.html#Driver do you think is compatible? in the driver section says mac os 10.08-10.13. Thanks for the support! Link to comment Share on other sites More sharing options...
vindu Posted October 4, 2018 Share Posted October 4, 2018 (edited) seem to be having some trouble with this on an asus chromebox cn60 detects fine, doesn't get a mac address, it can detect if a cable is being plugged in and unplugged, refuses to get a dhcp address from the router and ends up with a self-assigned ip instead ethernet appears to work in ubuntu fine kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: PCIe ASPM support disabled. kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: EEE support disabled. kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: RxPoll support enabled. kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: TCP/IPv4 segmentation offload enabled. kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: TCP/IPv6 segmentation offload enabled. kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: TCP/IPv6 checksum offload enabled. kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: Version 2.2.2 using interrupt mitigate value 0x5f51. Please don't support tonymacx86.com! kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: PCI power management capabilities: 0xffc3. kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: PME# from D3 (cold) supported. kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: PCIe link capabilities: 0x00477c11, link control: 0x0142. kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: Disable PCIe ASPM. kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: RTL8168G/8111G: (Chipset 20) at 0x<private>, 00:00:00:00:00:00 kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: Device is WoL capable. kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: MSI interrupt index: 1 kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: kIOEthernetWakeOnMagicPacket added to filters. kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: Already in power state 1. kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: No medium selected. Falling back to autonegotiation. kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: pollIntervalTime: 1000us kernel: (RealtekRTL8111) Ethernet [RealtekRTL8111]: Link up on en0, 100-Megabit, Full-duplex, No flow-control lspci -nnn 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c) Edited October 4, 2018 by vindu Link to comment Share on other sites More sharing options...
ignn Posted October 30, 2018 Share Posted October 30, 2018 Hello dears! Help with solving the problem please! I have RTL8111. Kext from Rehab leads to panic. Kext from Mieze works, but: After the computer restarts, the adapter disappears from the system, is missing from the system information, and therefore there is no network. That most strange! In Windows he, too, disappear! That is, in fact as if there is no network adapter. But the link indicator is lit)) When i reset Bios to default and setting him again - the adapter appears again. Any ideas friends Thanks in advance! Hardware: ACER Veriton Z4640G: Mac OS X 10.14; Clover; CPU: Intel Core i3-6100; GPU: Intel HD Graphics 530 438831_438765_myhackreg.zip Link to comment Share on other sites More sharing options...
jinbingmao Posted November 4, 2018 Share Posted November 4, 2018 kernel .Error (AppleSystemPolicy) Setting mach port for daemon kernel .Error: (Sandbox) Sandbox: identityservices(292) System Policy: deny(1) system-privilege 12010 kernel: (AppleCredentialManager) ACM: findCredentialSet: returning, err = -2. Link to comment Share on other sites More sharing options...
Mieze Posted November 4, 2018 Author Share Posted November 4, 2018 1 minute ago, jinbingmao said: kernel .Error (AppleSystemPolicy) Setting mach port for daemon kernel .Error: (Sandbox) Sandbox: identityservices(292) System Policy: deny(1) system-privilege 12010 kernel: (AppleCredentialManager) ACM: findCredentialSet: returning, err = -2. Sorry, but this is off-topic. Link to comment Share on other sites More sharing options...
nms Posted December 23, 2018 Share Posted December 23, 2018 Low priority question ahead (-; What is -- mDNS_Keepalive? Excepts from log are below 2018-12-23 11:03:30.289345+0300 0x2cd Default 0x0 0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: No medium selected. Falling back to autonegotiation. 2018-12-23 11:03:32.515865+0300 0x117 Default 0x0 0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: pollIntervalTime: 170us 2018-12-23 11:03:32.526669+0300 0x117 Default 0x0 0 0 kernel: (kernel) Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control 2018-12-23 11:03:33.143924+0300 0x458 Info 0x0 208 0 mDNSResponder: [com.apple.mDNSResponder:AllINFO] CheckInterfaceSupport: Interface en0 service IOEthernetInterface parent RTL8111 2018-12-23 11:03:33.143933+0300 0x458 Info 0x0 208 0 mDNSResponder: [com.apple.mDNSResponder:AllINFO] CheckInterfaceSupport: No mDNS_Keepalive for interface en0/IOEthernetInterface/RTL8111 2018-12-23 11:03:33.144238+0300 0x458 Info 0x0 208 0 mDNSResponder: [com.apple.mDNSResponder:AllINFO] CheckInterfaceSupport: Interface en0 service IOEthernetInterface parent RTL8111 2018-12-23 11:03:33.144247+0300 0x458 Info 0x0 208 0 mDNSResponder: [com.apple.mDNSResponder:AllINFO] CheckInterfaceSupport: No mDNS_Keepalive for interface en0/IOEthernetInterface/RTL8111 2018-12-23 11:03:33.207979+0300 0x458 Info 0x0 208 0 mDNSResponder: [com.apple.mDNSResponder:AllINFO] CheckInterfaceSupport: Interface en0 service IOEthernetInterface parent RTL8111 Link to comment Share on other sites More sharing options...
Mieze Posted December 23, 2018 Author Share Posted December 23, 2018 8 hours ago, nms said: What is -- mDNS_Keepalive? It's Apple's Bonjour daemon listening for requests. Mieze Link to comment Share on other sites More sharing options...
Luiz Saluti Posted January 7, 2019 Share Posted January 7, 2019 Hello Mieze, recently I purchased the following motherboard https://www.asrock.com/mb/Intel/Z390%20Phantom%20Gaming%20SLIac/index.asp#Specification It comes with the Realtek LAN chip RTL8125AG (Dragon). Do you plan on supporting this chip in the future. I have been searching all over but no Realtek kexts work right now. Thank you. Link to comment Share on other sites More sharing options...
Mieze Posted January 7, 2019 Author Share Posted January 7, 2019 8 hours ago, Luiz Saluti said: It comes with the Realtek LAN chip RTL8125AG (Dragon). Do you plan on supporting this chip in the future. I have been searching all over but no Realtek kexts work right now. Sure, I will add support for new devices as soon as Realtek releases Linux driver sources so that I can learn how to handle them. Mieze Link to comment Share on other sites More sharing options...
Luiz Saluti Posted January 7, 2019 Share Posted January 7, 2019 2 hours ago, Mieze said: Sure, I will add support for new devices as soon as Realtek releases Linux driver sources so that I can learn how to handle them. Mieze Great news! If you ever need any information regarding the chip, I can provide it to you. Link to comment Share on other sites More sharing options...
Luiz Saluti Posted January 26, 2019 Share Posted January 26, 2019 On 1/7/2019 at 5:25 PM, Mieze said: Sure, I will add support for new devices as soon as Realtek releases Linux driver sources so that I can learn how to handle them. Mieze Hello Mieze, I just tested Realtek drivers for the 8125 chip in a Ubuntu live USB (18.04 LTS). It worked fine and connection was great. I am attaching it here in case you have plans to support it in your future releases. Here is the original link from the realtek website, if you wish to download it directly. https://www.realtek.com/zh-tw/component/zoo/category/network-interface-controllers-10-100-1000m-gigabit-ethernet-pci-express-software Cheers.... r8125-9.001.00.tar.zip Link to comment Share on other sites More sharing options...
pharic Posted February 11, 2019 Share Posted February 11, 2019 Having problems with RTL8111H on High Sierra. Adapter appears, but only works a few times. Usually I have to restart 3 times the computer to get it working, the rest of times It doesn't works or It works too slowly. I can't find any ASPM option in my B350M Bazooka bios. Link to comment Share on other sites More sharing options...
Recommended Posts