New Driver for Realtek RTL8111

[Mieze]

Friend works with RTL8168E-VL?

This is the reference NIC I use for development and testing.

 

Mieze

[Sridhar]

Dear Mieze - many thanks for the great work you are doing for all of us on the RTL8111. 

 

My RIG is the Gigabyte BRIX 4770R. I have had the same issues everyone has reported. Stable with 1.1.3 and tx interrupts for versions 1.2. That was until now. I just am happy to report no issues so far on using the version you posted last RTL8111- V1.2.2-dev3. Speeds are great and no drops 

 

I am using your kext as is without any changes to the info.plist and the clover install (the kext is sitting in the KEXTS/10.9 folder in EFI rather than S/L/E). The NIC also is configured automatic and no manual changes in the ethernet settings 

 

my log 

 

7/13/14 9:02:40.000 AM kernel[0]: Ethernet [RealtekRTL8111]: Disable PCIe ASPM.

7/13/14 9:02:40.000 AM kernel[0]: Ethernet [RealtekRTL8111]: EEE support enabled.

7/13/14 9:02:40.000 AM kernel[0]: Ethernet [RealtekRTL8111]: TCP/IPv4 segmentation offload enabled.

7/13/14 9:02:40.000 AM kernel[0]: Ethernet [RealtekRTL8111]: TCP/IPv6 checksum offload enabled.

7/13/14 9:02:40.000 AM kernel[0]: Ethernet [RealtekRTL8111]: Version 1.2.2 using interrupt mitigate value 0xcf58.

7/13/14 9:02:40.000 AM kernel[0]: Ethernet [RealtekRTL8111]: RTL8168G/8111G: (Chipset 20) at 0xffffff81e5741000, 94:de:80:8f:8b:a9

7/13/14 9:02:43.000 AM kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

 

 

I will report if there are any issues. Many thanks and i finally found the version 1.2.2 working after about a month of having issues. Many thanks for your assistance on this forum

 

Sridhar

[eterea]

Thank you very much Mieze.

 

Fantastic job !!!!!

 

Five 5minutes with  RTL8111- V1.2.2-dev3.zip.

And no Disconnects!!!!.

 

Log: with utorrent.

 

13/07/14 11:57:36,000 kernel[0]: enable() ===>

13/07/14 11:57:36,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1

13/07/14 11:57:36,000 kernel[0]: Ethernet [RealtekRTL8111]: No medium selected. Falling back to autonegotiation.

13/07/14 11:57:36,000 kernel[0]: selectMedium() ===>

13/07/14 11:57:36,000 kernel[0]: selectMedium() <===

13/07/14 11:57:36,000 kernel[0]: setOffset79() ===>

13/07/14 11:57:36,000 kernel[0]: setOffset79() <===

13/07/14 11:57:36,000 kernel[0]: setMulticastMode() ===>

13/07/14 11:57:36,000 kernel[0]: setMulticastMode() <===

13/07/14 11:57:36,000 kernel[0]: enable() <===

13/07/14 11:57:36,000 kernel[0]: setMulticastMode() ===>

13/07/14 11:57:36,000 kernel[0]: setMulticastMode() <===

13/07/14 11:57:36,000 kernel[0]: setMulticastList() ===>

13/07/14 11:57:36,000 kernel[0]: setMulticastList() <===

13/07/14 11:57:36,000 kernel[0]: setMulticastMode() ===>

13/07/14 11:57:36,000 kernel[0]: setMulticastMode() <===

13/07/14 11:57:36,000 kernel[0]: getPacketFilters() ===>

13/07/14 11:57:36,000 kernel[0]: getPacketFilters() <===

13/07/14 11:57:36,000 kernel[0]: getPacketFilters() ===>

13/07/14 11:57:36,000 kernel[0]: getPacketFilters() <===

13/07/14 11:57:36,000 kernel[0]: setMulticastMode() ===>

13/07/14 11:57:36,000 kernel[0]: setMulticastMode() <===

13/07/14 11:57:36,000 kernel[0]: setMulticastList() ===>

13/07/14 11:57:36,000 kernel[0]: setMulticastList() <===

13/07/14 11:57:36,000 kernel[0]: setMulticastList() ===>

13/07/14 11:57:36,000 kernel[0]: setMulticastList() <===

13/07/14 11:57:36,000 kernel[0]: setMulticastList() ===>

13/07/14 11:57:36,000 kernel[0]: setMulticastList() <===

13/07/14 11:57:36,000 kernel[0]: setMulticastList() ===>

13/07/14 11:57:36,000 kernel[0]: setMulticastList() <===

13/07/14 11:57:36,653 configd[17]: network changed.

13/07/14 11:57:37,000 kernel[0]: setMulticastList() ===>

13/07/14 11:57:37,000 kernel[0]: setMulticastList() <===

13/07/14 11:57:39,000 kernel[0]: setOffset79() ===>

13/07/14 11:57:39,000 kernel[0]: setOffset79() <===

13/07/14 11:57:39,000 kernel[0]: setMulticastMode() ===>

13/07/14 11:57:39,000 kernel[0]: setMulticastMode() <===

13/07/14 11:57:39,000 kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 100-Megabit, Full-duplex, flow-control

13/07/14 11:57:39,000 kernel[0]: getPacketFilters() ===>

13/07/14 11:57:39,000 kernel[0]: getPacketFilters() <===

13/07/14 11:57:39,000 kernel[0]: setMulticastList() ===>

13/07/14 11:57:39,000 kernel[0]: setMulticastList() <===

13/07/14 11:57:43,000 kernel[0]: setMulticastList() ===>

13/07/14 11:57:43,000 kernel[0]: setMulticastList() <===

13/07/14 11:57:43,000 kernel[0]: setMulticastList() ===>

13/07/14 11:57:43,000 kernel[0]: setMulticastList() <===

13/07/14 11:57:43,706 configd[17]: network changed: v4(en0+:192.168.1.129) DNS+ Proxy+ SMB

13/07/14 11:57:43,000 kernel[0]: setMulticastList() ===>

13/07/14 11:57:43,000 kernel[0]: setMulticastList() <===

13/07/14 11:57:47,385 sandboxd[1183]: ([1178]) ntpd(1178) deny file-read-data /private/var/run/resolv.conf

13/07/14 11:57:47,402 sandboxd[1183]: ([1178]) ntpd(1178) deny file-read-data /private/var/run/resolv.conf

13/07/14 11:57:49,243 AirPlayUIAgent[1114]: 2014-07-13 11:57:49.242563 AM [AirPlayUIAgent] Changed PIN pairing: no

13/07/14 11:57:49,252 AirPlayUIAgent[1114]: 2014-07-13 11:57:49.252041 AM [AirPlayUIAgent] Changed PIN pairing: no

13/07/14 11:58:36,356 Finder[1075]: copyPrimaryAirPortInterface::ACInterfaceDeviceNameCopy returned NULL

13/07/14 11:58:42,602 uTorrent[1191]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.

13/07/14 11:58:42,602 uTorrent[1191]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.

13/07/14 11:58:43,000 kernel[0]: setMulticastList() ===>

13/07/14 11:58:43,000 kernel[0]: setMulticastList() <===

13/07/14 11:58:45,000 kernel[0]: considerRebuildOfPrelinkedKernel com.insanelymac.RealtekRTL8111 triggered rebuild

13/07/14 11:58:48,233 uTorrent[1191]: Notification: BitTorrentError (msgid=32772, wparam=2)

13/07/14 11:59:06,000 kernel[0]: setMulticastList() ===>

13/07/14 11:59:06,000 kernel[0]: setMulticastList() <===

13/07/14 11:59:50,182 fontd[1082]: BUG in libdispatch client: dispatch_mig_server: mach_msg() failed (ipc/send) invalid memory - 0x1000000c

13/07/14 12:00:42,000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

13/07/14 12:01:02,133 mds[811]: (Normal) Volume: volume:0x7fc38b860000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.mrjYVI

13/07/14 12:01:08,814 ntpd[794]: ntpd: time set +0.798468 s

13/07/14 12:01:08,821 com.apple.time[1063]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).

13/07/14 12:04:39,597 ntpd[794]: FREQ state ignoring -0.113542 s

13/07/14 12:05:49,257 ntpd[794]: FREQ state ignoring -0.217876 s

 

 

Good Job!!!!

[d123c]

Mieze,

 

you are doing a good work!

 

I test this 1.2.2-dev3 version and my connection became stable and faster than before. 

 

Here, you have my kernel log file.

http://ge.tt/api/1/files/8t4zpOn1/9/blob?download

 

Thank you very much.

 

Dioclecio

 

Ps. One question: Do you know how to put "Built in" into ethernet with clover? Thank you again.

[Mieze]

Ps. One question: Do you know how to put "Built in" into ethernet with clover? Thank you again.

 

http://clover-wiki.zetam.org/Fixing-DSDT#DSDT-mask

[zergtmn]

Mieze, thank you so much! I can confirm that bug is resolved and I finally have a stable internet connection!

[Mieze]

As the first results with version 1.2.2 dev3 are promising, everybody is encouraged to give it a try, in particular those users having trouble with version 1.2.0 and below. The archive includes the source as well as prebuilt binaries (debug and release). Please see: http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/?p=2040028

 

Mieze

[d123c]

Hi Mieze,

 

during these days, the driver is working fast and stable. I defined the FixLAN_2000 bit as true in my config.list but the built-in is not allowed. 

 

Do you have some suggestion?

 

Should I define this DSDT.aml file with some special injections?

 

Thanks for your help.

 

Yours,

 

Dioclecio

[Mieze]

@Dioclecio: On my machine there was no need to set the "built-in" property manually. It was set automatically for en0. Maybe your system is different, please check with IORegistryExplorer. In case you need further assistance with Clover please post in the corresponding section of the forum.

 

Mieze

[@ROBASEFR]

No problem here on OSX 10.10 DP3 and 8168D/8111D  with the latest 1.2.2 dev3

[JorgeMax]

Tested here without problems with RTL8168E/8111E. Mavericks in 10.9.4, and Yosemite DP3 with the test version 1.2.2 dev3.

[eterea]

A week with this driver without problems. (Mavericks 10.9.4) 

 

Thank you Mieze.

[Henry2010]

No problem here either on 10.9.4. Thanks.

 

Realtek RTL8168E-VL/8111E-VL PCI Express Gigabit Ethernet:

  Name: ethernet
  Type: Ethernet Controller
  Bus: PCI
  Vendor ID: 0x10ec
  Device ID: 0x8168
  Subsystem Vendor ID: 0x1458
  Subsystem ID: 0xe000
  Revision ID: 0x0006
  Link Width: x1
  BSD name: en0
  Kext name: RealtekRTL8111.kext
  Location: /System/Library/Extensions/RealtekRTL8111.kext
  Version: 1.2.2

 

[MilesTEG1]

Hello,

I installed the release version 1.2.2-dev3, and I'm wondering about to have the log I see in some posts.

Do I have to install the debug version ?

And how can I access to the log ?

 

Thank you very much

Miles

[Sherlocks]

hello mieze

i used your RTL8111 driver. thank you for your hard work.

i have a problem in yosemite beta1. it's lost connection. after i test download, upload in http://www.speedtest.net/, i lost internet connection.

for using internet, i need to unplug internet cable and plug internet cable

 

 

here is my log

 

2014. 7. 30. 오후 1:17:44.000 kernel[0]: Ethernet [RealtekRTL8111]: Disable PCIe ASPM.

2014. 7. 30. 오후 1:17:44.000 kernel[0]: Ethernet [RealtekRTL8111]: EEE support enabled.

2014. 7. 30. 오후 1:17:44.000 kernel[0]: Ethernet [RealtekRTL8111]: TCP/IPv4 segmentation offload enabled.

2014. 7. 30. 오후 1:17:44.000 kernel[0]: Ethernet [RealtekRTL8111]: TCP/IPv6 checksum offload enabled.

2014. 7. 30. 오후 1:17:44.000 kernel[0]: Ethernet [RealtekRTL8111]: Version 1.2.2 using interrupt mitigate value 0xcf58.

2014. 7. 30. 오후 1:17:44.000 kernel[0]: Ethernet [RealtekRTL8111]: RTL8168E/8111E: (Chipset 14) at 0xffffff812c8e4000, 

2014. 7. 30. 오후 1:17:44.000 kernel[0]: Ethernet [RealtekRTL8111]: Device is WoL capable.

2014. 7. 30. 오후 1:17:44.000 kernel[0]: Ethernet [RealtekRTL8111]: MSI interrupt index: 1

2014. 7. 30. 오후 1:17:44.000 kernel[0]: Ethernet [RealtekRTL8111]: kIOEthernetWakeOnMagicPacket added to filters.

2014. 7. 30. 오후 1:17:44.000 kernel[0]: Ethernet [RealtekRTL8111]: Already in power state 1.

2014. 7. 30. 오후 1:17:48.000 kernel[0]: Ethernet [RealtekRTL8111]: No medium selected. Falling back to autonegotiation.

2014. 7. 30. 오후 1:17:50.000 kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 100-Megabit, Full-duplex, No flow-control

2014. 7. 30. 오후 1:18:56.000 kernel[0]: Ethernet [RealtekRTL8111]: checksums applied: 0x5, checksums valid: 0x0

2014. 7. 30. 오후 1:21:21.000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

2014. 7. 30. 오후 1:21:23.000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

2014. 7. 30. 오후 1:21:23.000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

2014. 7. 30. 오후 1:21:23.000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

2014. 7. 30. 오후 1:21:23.000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

2014. 7. 30. 오후 1:21:23.000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

2014. 7. 30. 오후 1:21:23.000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

2014. 7. 30. 오후 1:21:23.000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

2014. 7. 30. 오후 1:21:23.000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

2014. 7. 30. 오후 1:21:23.000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

2014. 7. 30. 오후 1:21:23.000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

2014. 7. 30. 오후 1:21:23.000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

2014. 7. 30. 오후 1:21:23.000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

2014. 7. 30. 오후 1:21:23.000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

2014. 7. 30. 오후 1:21:23.000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

2014. 7. 30. 오후 1:21:23.000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

2014. 7. 30. 오후 1:21:23.000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

2014. 7. 30. 오후 1:21:23.000 kernel[0]: Ethernet [RealtekRTL8111]: replaceOrCopyPacket() failed.

2014. 7. 30. 오후 1:21:37.000 kernel[0]: Ethernet [RealtekRTL8111]: Not enough descriptors. Stalling.

2014. 7. 30. 오후 1:21:37.000 kernel[0]: Ethernet [RealtekRTL8111]: Restart stalled queue!

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Not enough descriptors. Stalling.

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Restart stalled queue!

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Not enough descriptors. Stalling.

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Restart stalled queue!

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Not enough descriptors. Stalling.

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Restart stalled queue!

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Not enough descriptors. Stalling.

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Restart stalled queue!

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Not enough descriptors. Stalling.

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Restart stalled queue!

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Not enough descriptors. Stalling.

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Restart stalled queue!

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Not enough descriptors. Stalling.

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Restart stalled queue!

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Not enough descriptors. Stalling.

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Restart stalled queue!

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Not enough descriptors. Stalling.

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Restart stalled queue!

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Not enough descriptors. Stalling.

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Restart stalled queue!

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Not enough descriptors. Stalling.

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Restart stalled queue!

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Not enough descriptors. Stalling.

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Restart stalled queue!

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Not enough descriptors. Stalling.

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Restart stalled queue!

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Not enough descriptors. Stalling.

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Restart stalled queue!

2014. 7. 30. 오후 1:31:06.000 kernel[0]: Ethernet [RealtekRTL8111]: Not enough descriptors. Stalling.

2014. 7. 30. 오후 1:31:07.000 kernel[0]: Ethernet [RealtekRTL8111]: Restart stalled queue!

2014. 7. 30. 오후 1:31:07.000 kernel[0]: Ethernet [RealtekRTL8111]: Not enough descriptors. Stalling.

2014. 7. 30. 오후 1:31:07.000 kernel[0]: Ethernet [RealtekRTL8111]: Restart stalled queue!

2014. 7. 30. 오후 1:31:07.000 kernel[0]: Ethernet [RealtekRTL8111]: Not enough descriptors. Stalling.

 

 

 

RealtekRTL8xxx.kext is no problem. i want to use your network driver.

thank you in advance.

[Mieze]

@

 

hello mieze

i used your RTL8111 driver. thank you for your hard work.

i have a problem in yosemite beta1. it's lost connection. after i test download, upload in http://www.speedtest.net/, i lost internet connection.

for using internet, i need to unplug internet cable and plug internet cable

 

 

here is my log

 

RealtekRTL8xxx.kext is no problem. i want to use your network driver.

thank you in advance.

 

Technically speaking the driver is working as expected but it gets flooded with packets eating up all the available buffer memory. This is definitely not a driver issue.

 

Mieze

[Sherlocks]

@

 

 

Technically speaking the driver is working as expected but it gets flooded with packets eating up all the available buffer memory. This is definitely not a driver issue.

 

Mieze

 

thank you for your reply.

then why do RealtekRTL8xxx.kext work without this problem in yosemite beta1?

 

i tested your driver to good work in lion. but after in mavericks, it has a problem which is about connection lost.

 

can we expect to fix this problem?

[Mieze]

then why do RealtekRTL8xxx.kext work without this problem in yosemite beta1?

Maybe because it is simply dropping packets, but this is not the way a driver should be designed.

i tested your driver to good work in lion. but after in mavericks, it has a problem which is about connection lost.

 

can we expect to fix this problem?

There is nothing to fix inside the driver. It works as it should. I had a few users reporting this issue while others with nearly the same configuration have no problems at all. I ran a lot of test and wasn't able to reproduce this behavior. Therefore I'm quite sure that this is due to a rampant application or, more probably, a badly configured system that should be fixed.

 

Mieze

[Sherlocks]

Maybe because it is simply dropping packets, but this is not the way a driver should be designed.

There is nothing to fix inside the driver. It works as it should. I had a few users reporting this issue while others with nearly the same configuration have no problems at all. I ran a lot of test and wasn't able to reproduce this behavior. Therefore I'm quite sure that this is due to a rampant application or, more probably, a badly configured system that should be fixed.

 

Mieze

 

okay thanks.

[gersio]

hi, i've installed you 1.2.2dev3 version on lion 10.3.1 but system preferences don't show any network adapter.

Here's the log:

 

Jul 30 20:03:20 Mac-Pro-di-Gersio com.apple.kextd[10]: Failed to load RealtekRTL8111.kext - (libkern/kext) link error.

Jul 30 20:03:20 Mac-Pro-di-Gersio com.apple.kextd[10]: Load com.insanelymac.RealtekRTL8111 failed; removing personalities from kernel.

Jul 30 20:03:26 Mac-Pro-di-Gersio com.apple.kextcache[462]: kxld[com.insanelymac.RealtekRTL8111]: The Mach-O file is malformed: Invalid segment type in MH_KEXT_BUNDLE kext: 42.

Jul 30 20:03:26 Mac-Pro-di-Gersio com.apple.kextcache[462]: Prelink failed for com.insanelymac.RealtekRTL8111; omitting from prelinked kernel.

 

how i can solve this?

[Mieze]

@gersio: Get a copy of Xcode 4.6.3 and build from source with the 10.7 SDK selected as the base SDK.

 

For the debug version choose "Build" from the Product menu [Cmd + B]. In order to get to the built kext use the right mouse button as shown below and choose "Show in Finder"

 

For a release build choose "Product" -> "Build for" -> "Archiving". In order to locate the product use the same method as with the debug build but go to the parent folder where you will find another folder called "Release" in which you will find the release version of the kext.

 

Use your favorite method to install it. Good luck!

 

Mieze

 

 

[gersio]

really thanks, i'll try!

[MilesTEG1]

Hello,

Does it work with Yosemite ?
I use clover to boot. I put the kext into EFI/Clover/kext/10.10/ and EFI/Clover/kext/other/, but I'm not sure the driver works.
Do I have to remove IONetworkingFamily.kext from the same folders ?

And do I have to let IOUserEthernet.kext in /SL/E/ ?

 

Thanks for you help.
Miles

[Onixs]

Hi Mieze

Im not really into hardware stuff so i will ask...

I have this 2 P8H61 Asus board, both are on the same bios version. Using your driver,  one is detected as chipset 16 which i have bonjour working. But the other one is detected as chipset 17 and bonjour is not working. Is it possible that 2 identical boards could have a difference in ethernet chip? How so?

How could i be able to fix bonjour of chipset 17? I can do it manually via "Connect to Server" though.

 

Thanks

[MilesTEG1]

Hello,

I want to report that the 1.2.2-dev3 works great under Mavericks 10.9.4 with Clover boot loader, but don't works correctly with Yosemite Beta (the public, not DPx).

With Yosemite, I have disconnection.

I have seen this in the eventlog :

Aug 11 02:29:01 localhost kernel[0]: Ethernet [RealtekRTL8111]: EEE support enabled.

Aug 11 02:29:01 localhost kernel[0]: Ethernet [RealtekRTL8111]: TCP/IPv4 segmentation offload enabled.

Aug 11 02:29:01 localhost kernel[0]: Ethernet [RealtekRTL8111]: TCP/IPv6 checksum offload enabled.

Aug 11 02:29:01 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeededEthernet [RealtekRTL8111]: Version 1.2.2 using interrupt mitigate value 0xcf58.

Aug 11 02:29:01 localhost kernel[0]: Ethernet [RealtekRTL8111]: RTL8168D/8111D: (Chipset 9) at 0xffffff811661d000, 6c:f0:49:53:fc:b9

Aug 11 02:29:04 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 02:29:05 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 02:29:07 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 02:29:16 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 02:29:19 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 02:29:23 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 02:29:26 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 02:29:32 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 02:29:35 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 02:29:39 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 02:29:42 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 02:29:42 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 02:29:45 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 02:29:45 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 02:29:48 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 02:29:48 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 02:29:51 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 02:29:52 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 02:29:54 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 11:42:15 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 11:42:18 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 11:42:40 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 11:42:43 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 11:42:44 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 11:42:47 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 11:42:50 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 11:42:52 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 11:42:53 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 11:42:56 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 11:42:56 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 11:43:03 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 11:43:09 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 11:43:11 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 11:43:12 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 11:43:15 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 11:43:17 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 11:43:24 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 11:43:25 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 11:43:28 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 11:43:37 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 11:43:40 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 11:43:41 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 11:43:44 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 11:43:51 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 11:43:57 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 11:43:58 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 11:44:04 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 11:44:05 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 11:44:08 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control

Aug 11 11:44:09 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link down on en0

Aug 11 11:44:11 iHack kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 100-Megabit, Full-duplex, flow-control

You see that it is unstable, and finish to be at 100Mbits...

Whereas with Mavericks, no problems, it lock at 1-Gigabit and stay at it. No connection lost.