RealtekR1000 v3

[lehieuds]

Hi, Slice

 

I have problem with config hardware ethernet in network, my Device ID is 0x8136 and I using RealtekR1000 but ethernet not connect to internet.

I have tried config:

Configure --> Manually
Speed ---> 10BaseT/UTP

But not work.

Can you help me, please?

Sorry for my bad English.

[mitch_de]

Do you see some messages (from the kext) in the console (system.log) at bootime ?

[Mohamed Khairy]

hi slice i have problem with my notebook eth rtl8105e-vb 

with manual config it give this 

hope that you can fix it soon

[wastez]

Hello,

 

Tested the newest version of the kext.
WOL wasn´t working on my 8111C

[lord_webi]

great, thanks a lot for the kext !

[westwaerts]

V 304 works way better with RTL8168E-VL/8111E-VL

 

thx for the perfection

[plsh2me]

In OS X 10.8.5 facing the problem with Ethernet device. If I install the kext I lose my wifi, shows me wifi driver not installed . Also not work Ethernet !!! 

pasted  the system log if you can fix the problem.

 

Oct 3 20:10:52 localhost kernel[0]: ath_get_caps[4038] rx chainmask mismatch actual 1 sc_chainmak 0
Oct 3 20:10:52 localhost kernel[0]: 43.931355: ath_get_caps[4013] tx chainmask mismatch actual 1 sc_chainmak 0
Oct 3 20:10:52 localhost kernel[0]: 43.935982: Atheros: mac 192.2 phy 14.0 radio 12.0
Oct 3 20:10:52 localhost kernel[0]: 43.935988: Use hw queue 0 for WME_AC_BE traffic
Oct 3 20:10:52 localhost kernel[0]: 43.935990: Use hw queue 1 for WME_AC_BK traffic
Oct 3 20:10:52 localhost kernel[0]: 43.935992: Use hw queue 2 for WME_AC_VI traffic
Oct 3 20:10:52 localhost kernel[0]: 43.935994: Use hw queue 3 for WME_AC_VO traffic
Oct 3 20:10:52 localhost kernel[0]: 43.935995: Use hw queue 8 for CAB traffic
Oct 3 20:10:52 localhost kernel[0]: 43.935997: Use hw queue 9 for beacons
Oct 3 20:10:52 localhost kernel[0]: 43.936102: wlan_vap_create : enter. devhandle=0x68fe86b8, opmode=IEEE80211_M_STA, flags=0x1
Oct 3 20:10:52 localhost kernel[0]: 43.936140: wlan_vap_create : exit. devhandle=0x68fe86b8, opmode=IEEE80211_M_STA, flags=0x1.
Oct 3 20:10:52 localhost kernel[0]: **** [iOBluetoothHostControllerUSBTransport][start] -- completed -- this = 0xffffff800c2f5800 ****
Oct 3 20:10:52 localhost kernel[0]: No interval found for . Using 8000000
Oct 3 20:10:54 localhost apsd[69]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
Oct 3 20:10:58 localhost kernel[0]: ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
Oct 3 20:10:59 localhost awacsd[67]: Exiting
Oct 3 20:11:00 localhost kernel[0]: ATY_Init: Starting
Oct 3 20:11:00 localhost kernel[0]: ATY_Init: Checking dev-id 9480
Oct 3 20:11:00 localhost kernel[0]: ATY_Init: Card 0x9480 was posted
Oct 3 20:11:00 localhost kernel[0]: ATY_Init: Card was posted, reading rom from legacy address
Oct 3 20:11:00 localhost kernel[0]: ATY_Init: Quiting for card 0x9480
Oct 3 20:11:00 localhost kernel[0]: [AGPM Controller] unknownPlatform
Oct 3 20:11:00 localhost UserEventAgent[11]: WirelessAirPortDeviceNameCopy(): no BSD interface name found for object 12043
Oct 3 20:11:00 localhost UserEventAgent[11]: Captive: [mySCCopyWiFiDevices:162] WiFi Device Name == NULL
Oct 3 20:11:00 localhost configd[17]: en1: DHCP duplicate configured service
Oct 3 20:11:00 localhost configd[17]: en1: AUTOMATIC-V6 duplicate configured service
Oct 3 20:11:00 localhost UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
Oct 3 20:11:00 localhost loginwindow[53]: Login Window Application Started
Oct 3 20:11:00 localhost airportd[92]: _processDLILEvent: en0 attached (down)
Oct 3 20:11:00 localhost configd[17]: en1: DHCP duplicate configured service
Oct 3 20:11:00 localhost configd[17]: en1: AUTOMATIC-V6 duplicate configured service
Oct 3 20:11:00 localhost configd[17]: bootp_session_transmit: bpf_write(en0) failed: Network is down (50)
Oct 3 20:11:00 localhost configd[17]: DHCP en0: INIT-REBOOT transmit failed
Oct 3 20:11:00 localhost kernel[0]: DSMOS has arrived
Oct 3 20:11:00 localhost kernel[0]: [iOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- controller = 0xffffff800c2f5800
Oct 3 20:11:00 localhost kernel[0]: [iOBluetoothHCIController][start] -- completed
Oct 3 20:11:00 localhost kernel[0]: ** Device in slot: SLOT-1 **
Oct 3 20:11:00 localhost kernel[0]: SuperIODevice: [Fatal] found unsupported ship ITE sequence ID=0xffff, Winbond sequence ID=0xfc11
Oct 3 20:11:00 localhost kernel[0]: com_chucko_RealtekR1000: Ethernet address f0:4d:a2:a9:1d:46
Oct 3 20:11:00 localhost kernel[0]: SuperIODevice: [Fatal] found unsupported ship ITE sequence ID=0xffff, Winbond sequence ID=0xfc11
Oct 3 20:11:00 localhost kernel[0]: AirPort_AtherosNewma40: Ethernet address d0:df:9a:74:3f:3e
Oct 3 20:11:00 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
Oct 3 20:11:00 localhost kernel[0]: IO80211Interface::efiNVRAMPublished():
Oct 3 20:11:00 localhost kernel[0]: 52.837292: ATHR: unknown locale: 60
Oct 3 20:11:00 localhost kernel[0]: AtherosNewma40P2PInterface::init name role 1 this 0xffffff800e249000
Oct 3 20:11:00 localhost kernel[0]: AtherosNewma40P2PInterface::init() role 1
Oct 3 20:11:00 localhost kernel[0]: AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving).
Oct 3 20:11:00 localhost kernel[0]: en0::IO80211Interface::postMessage bssid changed
Oct 3 20:11:00 localhost kernel[0]: 52.905715: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
Oct 3 20:11:00 localhost kernel[0]: 52.905733: switchVap from 1 to 1
Oct 3 20:11:00 localhost com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client '/usr/libexec/UserEventAgent' [11] for authorization created by '/usr/libexec/UserEventAgent' [11] (100012,0)
Oct 3 20:11:00 localhost configd[17]: en1: DHCP duplicate configured service
Oct 3 20:11:00 localhost configd[17]: en1: AUTOMATIC-V6 duplicate configured service
Oct 3 20:11:00 localhost netbiosd[91]: Unable to start NetBIOS name service:
Oct 3 20:11:01 localhost mds[49]: (Normal) FMW: FMW 0 0
Oct 3 20:11:01 localhost WindowServer[93]: Server is starting up
Oct 3 20:11:01 localhost kernel[0]: 52.962636: ATHR: unknown locale: 60
Oct 3 20:11:01 localhost kernel[0]: 52.991899: performCountryCodeOperation: Not connected, scan in progress[0]
Oct 3 20:11:01 localhost kernel[0]: 52.996864: setWOW_PARAMETERS:wowevents = 2(1)
Oct 3 20:11:01 localhost kernel[0]: 52.997897: ATHR: unknown locale: 60
Oct 3 20:11:01 localhost kernel[0]: 53.061763: ATHR: unknown locale: 60
Oct 3 20:11:01 localhost kernel[0]: 53.062256: ATHR: unknown locale: 60
Oct 3 20:11:01 localhost kernel[0]: en0: 802.11d country code set to 'IT '.
Oct 3 20:11:01 localhost kernel[0]: 53.145815: ATHR: unknown locale: 60
Oct 3 20:11:01 localhost kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13
Oct 3 20:11:01 localhost digest-service[100]: label: default
Oct 3 20:11:01 localhost digest-service[100]: dbname: od:/Local/Default
Oct 3 20:11:01 localhost digest-service[100]: mkey_file: /var/db/krb5kdc/m-key
Oct 3 20:11:01 localhost digest-service[100]: acl_file: /var/db/krb5kdc/kadmind.acl
Oct 3 20:11:01 localhost digest-service[100]: digest-request: uid=0
Oct 3 20:11:01 localhost rpcsvchost[101]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
Oct 3 20:11:01 localhost digest-service[100]: digest-request: init request
Oct 3 20:11:01 localhost digest-service[100]: digest-request: init return domain: BUILTIN server: LOCALHOST
Oct 3 20:11:01 localhost WindowServer[93]: Session 256 retained (2 references)
Oct 3 20:11:01 localhost WindowServer[93]: Session 256 released (1 references)
Oct 3 20:11:01 localhost WindowServer[93]: Session 256 retained (2 references)
Oct 3 20:11:01 localhost WindowServer[93]: init_page_flip: page flip mode is on
Oct 3 20:11:01 localhost kernel[0]: en0: BSSID changed to 5c:d9:98:73:2a:08
Oct 3 20:11:01 localhost kernel[0]: en0::IO80211Interface::postMessage bssid changed
Oct 3 20:11:01 localhost kernel[0]: AirPort: Link Up on en0
Oct 3 20:11:01 localhost kernel[0]: 53.842249: apple80211Request[10310] Unsupported ioctl 181
Oct 3 20:11:01 localhost kernel[0]: en0: BSSID changed to 5d:d9:98:73:2b:08
Oct 3 20:11:01 localhost kernel[0]: en0::IO80211Interface::postMessage bssid changed
Oct 3 20:11:01 localhost kernel[0]: AirPort: RSN handshake complete on en0
Oct 3 20:11:02 localhost airportd[92]: _doAutoJoin: Already associated to “InfostradaWiFi-732a07”. Bailing on auto-join.
Oct 3 20:11:02 localhost kernel[0]: 54.062655: ATHR: unknown locale: 60

 

 

Without Ethernet kext wifi goes ok.

 

Thank you

Palash

[Slice]

It is wrong your Airport attached to en0:

Dlete network.plist and create interfaces from init

en0 must be LAN

en1 must be Airport

[Huckleberry Pie]

Works 'swell on the RTL8111 NIC on my DG31PR under Mavericks GM, thanks!

[plsh2me]

It is wrong your Airport attached to en0:

Dlete network.plist and create interfaces from init

en0 must be LAN

en1 must be Airport

Hey, You are right problem is on the connection sequence as you said en0 must be LAN.

Deleted all network from SystemPreferences/Network, but I was not able to create network Ethernet on en0. It takes place on en1 & wifi on en0.

Anyway if I configure Ethernet manually it works, but it remains connected if I unplug cable (I mean status remain connected) !!! And when connect it again not work.   . 

It could be a great pleasure of you, if you tell me in step by step procedure you referred .

Thank you

Palash

[Slice]

Reinstall your system.

I don't know what is the procedure. I just want to say how I should looks finally.

[plsh2me]

Reinstall your system.

I don't know what is the procedure. I just want to say how I should looks finally.

 

Thank you for your reply.

 

Got another kext (AppleRTL8169Ethernet.kext), with this manually only selected the hardware to 10 baseT/UTP & works fine . 

[Huckleberry Pie]

Was it just me, or do I really have to manually add a DNS server for the connection to work properly?

[Slice]

Was it just me, or do I really have to manually add a DNS server for the connection to work properly?

No, you don't.

[XLR]

Slice, do you have a 64bit-only version of this kext by any chance? (without 32bit code)

[Slice]

Slice, do you have a 64bit-only version of this kext by any chance? (without 32bit code)

You may use lipo command. I don't remember exact sequence.

But my fat kext works fine in ML and Maverics and no problem with kernelcache. I don't know what is the origin of the rumor that "kexts must be thin".

[ZenGiga]

Working well in Mavericks for the RTL8168 on my motherboard. But not for the RTL8169 on the GA311 pci gigabit card I also have, which remains invisible.

 

Read the whole thread twice but am confused still: the RTL8169 is *not* currently supported with this driver, right?

[XLR]

I don't know what is the origin of the rumor that "kexts must be thin".

I'm trying to stick it inside bios, where every kilobyte of space is critical.

[Wppley2]

Works great on my GA-EP45-UD3l RTL8168! Thanks!

[Slice]

I'm trying to stick it inside bios, where every kilobyte of space is critical.

find *.kext/*/MacOS/* -exec lipo -info "{}" \;
find *.kext/*/MacOS/* -exec lipo {} -thin x86_64 -output {} \;

[chris1111]

HI slice   does it work on  Mavericks  ?? and whit this kext, not needed RTL81xx ?? 

[Slice]

HI slice   does it work on  Mavericks  ?? and whit this kext, not needed RTL81xx ?? 

But yes! I made this driver for me, for my computer #1 in signature. There are Maverics and Lion.

identified as RTL8168E-VL/8111E-VL

Index Refs Address            Size       Wired      Name (Version) <Linked Against>
   13    4 0xffffff7f80ccb000 0xd000     0xd000     org.netkas.FakeSMC (3.3.1) <10 7 5 4 3>
   14    0 0xffffff7f80e01000 0x5000     0x5000     org.mozodojo.ITEIT87x (1.0.3) <13 7 5 4 3>
   19    0 0xffffff7f81429000 0x6000     0x6000     org.slice.IntelCPUMonitor (1.1) <13 7 5 4 3>
   20    0 0xffffff7f81431000 0x3000     0x3000     org.slice.HWInfo (1) <13 7 4 3>
   37    0 0xffffff7f819cc000 0x2000     0x2000     net.osrom.kext.Disabler (1.0.1) <4 3>
   43    0 0xffffff7f80c80000 0x3e000    0x3e000    org.chucko.driver.RealtekR1000 (3.0.4d1) <42 11 5 4 3 1>
   67    0 0xffffff7f81444000 0x4000     0x4000     com.intel.driver.EnergyDriver (2.0) <7 5 4 3>
   68    0 0xffffff7f80cd8000 0x6000     0x6000     org.slice.RadeonMonitor (1.0.0d1) <13 11 7 4 3>
   87    0 0xffffff7f80b66000 0x21000    0x21000    org.voodoo.driver.VoodooHDA (2.8.4) <86 11 7 5 4 3>

[chris1111]

 

But yes! I made this driver for me, for my computer #1 in signature. There are Maverics and Lion.

identified as RTL8168E-VL/8111E-VL

Index Refs Address            Size       Wired      Name (Version) <Linked Against>
   13    4 0xffffff7f80ccb000 0xd000     0xd000     org.netkas.FakeSMC (3.3.1) <10 7 5 4 3>
   14    0 0xffffff7f80e01000 0x5000     0x5000     org.mozodojo.ITEIT87x (1.0.3) <13 7 5 4 3>
   19    0 0xffffff7f81429000 0x6000     0x6000     org.slice.IntelCPUMonitor (1.1) <13 7 5 4 3>
   20    0 0xffffff7f81431000 0x3000     0x3000     org.slice.HWInfo (1) <13 7 4 3>
   37    0 0xffffff7f819cc000 0x2000     0x2000     net.osrom.kext.Disabler (1.0.1) <4 3>
   43    0 0xffffff7f80c80000 0x3e000    0x3e000    org.chucko.driver.RealtekR1000 (3.0.4d1) <42 11 5 4 3 1>
   67    0 0xffffff7f81444000 0x4000     0x4000     com.intel.driver.EnergyDriver (2.0) <7 5 4 3>
   68    0 0xffffff7f80cd8000 0x6000     0x6000     org.slice.RadeonMonitor (1.0.0d1) <13 11 7 4 3>
   87    0 0xffffff7f80b66000 0x21000    0x21000    org.voodoo.driver.VoodooHDA (2.8.4) <86 11 7 5 4 3>

ok thank you for the fast respond   I try right now on my pro book 4530s  

 

 

EDIT********

works perfect     another satisfied customer   

[Kynyo]

This driver support OS X Mavericks?

 

[Slice]

HI slice   does it work on  Mavericks  ?? and whit this kext, not needed RTL81xx ??

 

 

But yes! I made this driver for me, for my computer #1 in signature. There are Maverics and Lion.

identified as RTL8168E-VL/8111E-VL

Index Refs Address            Size       Wired      Name (Version) <Linked Against>
   13    4 0xffffff7f80ccb000 0xd000     0xd000     org.netkas.FakeSMC (3.3.1) <10 7 5 4 3>
   14    0 0xffffff7f80e01000 0x5000     0x5000     org.mozodojo.ITEIT87x (1.0.3) <13 7 5 4 3>
   19    0 0xffffff7f81429000 0x6000     0x6000     org.slice.IntelCPUMonitor (1.1) <13 7 5 4 3>
   20    0 0xffffff7f81431000 0x3000     0x3000     org.slice.HWInfo (1) <13 7 4 3>
   37    0 0xffffff7f819cc000 0x2000     0x2000     net.osrom.kext.Disabler (1.0.1) <4 3>
   43    0 0xffffff7f80c80000 0x3e000    0x3e000    org.chucko.driver.RealtekR1000 (3.0.4d1) <42 11 5 4 3 1>
   67    0 0xffffff7f81444000 0x4000     0x4000     com.intel.driver.EnergyDriver (2.0) <7 5 4 3>
   68    0 0xffffff7f80cd8000 0x6000     0x6000     org.slice.RadeonMonitor (1.0.0d1) <13 11 7 4 3>
   87    0 0xffffff7f80b66000 0x21000    0x21000    org.voodoo.driver.VoodooHDA (2.8.4) <86 11 7 5 4 3>

 

This driver support OS X Mavericks?