RehabMan Posted September 4, 2015 Share Posted September 4, 2015 My laptop is the same on my signature, an HP ENVY j100el, SMBIOS instead is a MacBook Pro 11,2. I don't know if could be useful for you, but here's a system info file that I made under Windows where you can find all of the specs of my laptop. Envy J series repo/guide link: https://github.com/RehabMan/HP-Envy-DSDT-Patch Link to comment Share on other sites More sharing options...
helpme Posted September 4, 2015 Share Posted September 4, 2015 Which patch should I apply? This one? Link to comment Share on other sites More sharing options...
RehabMan Posted September 4, 2015 Share Posted September 4, 2015 Which patch should I apply? This one? That is not a patch. It is a usb port injector kext for 10.11. You should follow the guide from beginning to end. Link to comment Share on other sites More sharing options...
helpme Posted September 4, 2015 Share Posted September 4, 2015 Ok, I followed your guide on tonyxcam. Everything works fine until I need to execute command "cd ~/Projects/envy.git ./download.sh./install_downloads.sh" Terminal gives the following error "fatal: destination path 'envy.git' already exists and is not an empty directory." Then, if I go on another error at "cd ~/Projects/envy.git ./disassemble.shmake patchmakemake install" ./disassemble.sh: line 18: patchmatic: command not found cp: ./native_linux/DSDT: No such file or directory cp: ./native_linux/SSDT*: No such file or directory cp: ./native_linux/dynamic/SSDT*: No such file or directory chmod: ./tmp/*: No such file or directory rm: ../unpatched/*.dsl: No such file or directory ./disassemble.sh: line 43: iasl: command not found mv: rename *.dsl to ../unpatched/*.dsl: No such file or directory Link to comment Share on other sites More sharing options...
RehabMan Posted September 4, 2015 Share Posted September 4, 2015 Ok, I followed your guide on tonyxcam. Everything works fine until I need to execute command "cd ~/Projects/envy.git ./download.sh ./install_downloads.sh" Terminal gives the following error "fatal: destination path 'envy.git' already exists and is not an empty directory."[/size] Then, if I go on another error at[/size] "[/size]cd ~/Projects/envy.git ./disassemble.sh make patch make make install" ./disassemble.sh: line 18: patchmatic: command not found[/size] cp: ./native_linux/DSDT: No such file or directory cp: ./native_linux/SSDT*: No such file or directory cp: ./native_linux/dynamic/SSDT*: No such file or directory chmod: ./tmp/*: No such file or directory rm: ../unpatched/*.dsl: No such file or directory ./disassemble.sh: line 43: iasl: command not found mv: rename *.dsl to ../unpatched/*.dsl: No such file or directory You need to follow it from the beginning. The USB must be prepared according to the guide. You must boot from USB when running the post install steps (especially ./disassemble.sh). And running ./download.sh and ./install_downloads.sh succesfully is a prereq for the rest of the steps. No idea without seeing what exactly you're typing and the output. At any rate, troubleshooting your issues here is not correct. It is off-topic as this has nothing to do with GenericUSBXHCI.kext. The link for feedback is provided in the README. Link to comment Share on other sites More sharing options...
Dmitry R Posted September 15, 2015 Share Posted September 15, 2015 GenericUSBXHCI.kext should not be used on Yosemite+. Use native AppleUSBXHCI.kext instead. May require DSDT patches and/or FakePCIID_XHCIMux.kext. I have Samsung laptop running 10.10.5/Clover with Intel Core i7 3537U/HM75 rev. 04 and Renesas USB 3.0 controller 0x1912:0x0015 As far as you recommend not to use GenericUSBXHCI.kext, I used patches for AppleUSBXHCI.kext from here http://www.insanelymac.com/forum/files/file/150-patched-appleusbxhci/ and it does work for me. However, I can't find a way how to recover usb drives after sleep. The only thing I found related to this problem is InjectClockId in clover config. I switched this option on, but no effect. What else can be done to get rid of this problem? Thank you, Dmitry Link to comment Share on other sites More sharing options...
Slice Posted September 16, 2015 Share Posted September 16, 2015 I have Samsung laptop running 10.10.5/Clover with Intel Core i7 3537U/HM75 rev. 04 and Renesas USB 3.0 controller 0x1912:0x0015 As far as you recommend not to use GenericUSBXHCI.kext, I used patches for AppleUSBXHCI.kext from here http://www.insanelymac.com/forum/files/file/150-patched-appleusbxhci/ and it does work for me. However, I can't find a way how to recover usb drives after sleep. The only thing I found related to this problem is InjectClockId in clover config. I switched this option on, but no effect. What else can be done to get rid of this problem? Thank you, Dmitry This version do the work IOUSBFamily 10.8.4 Slice+AnV with full AppleUSBXHCI support for any USB3 chip (V12) Link to comment Share on other sites More sharing options...
Dmitry R Posted September 17, 2015 Share Posted September 17, 2015 This version do the work IOUSBFamily 10.8.4 Slice+AnV with full AppleUSBXHCI support for any USB3 chip (V12) Thank you, Slice, I'll try this out. Meanwhile, I found a temporary solution with SleepWatcher. Link to comment Share on other sites More sharing options...
TheRacerMaster Posted September 17, 2015 Share Posted September 17, 2015 Try manually patching AppleUSBXHCI yourself, ignoring the "Disable the sleep code leaving the controller in non-working state after wake:" patch. Link to comment Share on other sites More sharing options...
rotoyouoio Posted September 19, 2015 Share Posted September 19, 2015 has anyone tried all the options for ASM1042 on 10.11 El Capitan like oyen/highpoint/caldigit kexts? and is it not possible to apply the patches from IOUSBFamily 10.8.4 Slice+AnV with full AppleUSBXHCI support for any USB3 chip (V12) or simply replace the iousbfamily with a legacy patched one? is there any hope for us ASUS users? =0( this chipset is used on a hell of a lot of boards. Link to comment Share on other sites More sharing options...
frankiee Posted September 19, 2015 Share Posted September 19, 2015 is there any hope for us ASUS users? =0( this chipset is used on a hell of a lot of boards. Yeah I am also really interested in a good solution for ASM1042 chipsets and 10.11 ... apart from buying a separate card of course. 1 Link to comment Share on other sites More sharing options...
marmotta Posted October 1, 2015 Share Posted October 1, 2015 With Yosemite my Asus asm1042 is perfect with oyen mxhcd, now with El Capitan mxhcd cause a kernel panic at boot Link to comment Share on other sites More sharing options...
Frank Nitty Posted November 22, 2015 Share Posted November 22, 2015 Is there any solution available yet for non-Intel Renasas USB 3.0 chipset for El Cap? Link to comment Share on other sites More sharing options...
Riley Freeman Posted November 22, 2015 Share Posted November 22, 2015 Still nothing. I don't think Apple have released the source code yet. And they've maybe sunk some money into Fresco Logic shares. Link to comment Share on other sites More sharing options...
Frank Nitty Posted November 23, 2015 Share Posted November 23, 2015 Still nothing. I don't think Apple have released the source code yet. And they've maybe sunk some money into Fresco Logic shares. Ok... Damn, why did Apple have to pull this stunt and ruin it for us with non-Intel USB 3.0, smh Link to comment Share on other sites More sharing options...
Alex Novelli Posted November 23, 2015 Share Posted November 23, 2015 Anyone know about any other solution for ASMedia 1042 USB 3.0 solution for El Capitan? Thanks!! Link to comment Share on other sites More sharing options...
frankiee Posted November 23, 2015 Share Posted November 23, 2015 Seems the option you currently have is to disable the controller and buy a FL1100 based USB card. The Inateck ones are known to work fine, they even are bootable. Link to comment Share on other sites More sharing options...
Frank Nitty Posted December 8, 2015 Share Posted December 8, 2015 Still nothing. I don't think Apple have released the source code yet. And they've maybe sunk some money into Fresco Logic shares. Ok... Damn, why did Apple have to pull this stunt and ruin it for us with non-Intel USB 3.0, smh Although I dreaded it, I conceded defeat and invested in the most likely solution Link to comment Share on other sites More sharing options...
oSxFr33k Posted December 11, 2015 Share Posted December 11, 2015 Will this one boot like the Inateck KT4005? http://www.amazon.com/ORICO-PCI-Express-Adapter-Controller-Windows/dp/B005LC2MLC/ref=sr_1_fkmr0_1?ie=UTF8&qid=1449810352&sr=8-1-fkmr0&keywords=ORICO+USB+Expansion+Card%2C+USB3.0+4+Port+PCI+Express Link to comment Share on other sites More sharing options...
XLR Posted December 11, 2015 Share Posted December 11, 2015 Will this one boot like the Inateck KT4005? http://www.amazon.com/ORICO-PCI-Express-Adapter-Controller-Windows/dp/B005LC2MLC/ref=sr_1_fkmr0_1?ie=UTF8&qid=1449810352&sr=8-1-fkmr0&keywords=ORICO+USB+Expansion+Card%2C+USB3.0+4+Port+PCI+Express No, this one has a VIA chipset. 1 Link to comment Share on other sites More sharing options...
oSxFr33k Posted December 11, 2015 Share Posted December 11, 2015 No, this one has a VIA chipset. Sorry I meant this one, I did not realize this company made the same card with a different chipset, very weird!! I believe the one I just now linked may be the FL1100 chip and if so will that boot an OS from a USB flash drive? http://www.ebay.com/itm/381043285559?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Now that Apple has released the source for OSX 10.11 hopefully the developers look into updating their drivers if at all possible!! http://www.insanelymac.com/_/apple/apple-released-today-the-open-source-code-of-os-r1053 Link to comment Share on other sites More sharing options...
frankiee Posted December 12, 2015 Share Posted December 12, 2015 Sorry I meant this one, I did not realize this company made the same card with a different chipset, very weird!! I believe the one I just now linked may be the FL1100 chip and if so will that boot an OS from a USB flash drive? http://www.ebay.com/itm/381043285559?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Now that Apple has released the source for OSX 10.11 hopefully the developers look into updating their drivers if at all possible!! http://www.insanelymac.com/_/apple/apple-released-today-the-open-source-code-of-os-r1053 Hmm it states "other Mac OS needs GenericUSBXHCI open source USB3.0 xHC driver" in the description. And as we know, that wont work with 10.11. I do not see the specific chipset mentioned. So maybe you just better go with one of the Inateck ones, they work fine (apparently all of them, including the 5 port + internal header version I have myself). Also has very mixed reviews, personally I would stay away from that. 1 Link to comment Share on other sites More sharing options...
TheRacerMaster Posted December 12, 2015 Share Posted December 12, 2015 Managed to get GenericUSBXHCI to "work" under 10.11 by manually copying headers from 10.10 SDK. No USB bus seen under System Information/USB, but devices attached to the USB 3.0 controller mount fine. I had to delete AppleUSBXHCI.kext in order to get GenericUSBXHCI to load. Attached is the (very hacky) source. See a few posts down for the GitHub link. I probably won't work on this anymore at all, as I have no need to (have native Intel 7 Series xHCI), but I guess it could be useful for someone. 8 Link to comment Share on other sites More sharing options...
oSxFr33k Posted December 12, 2015 Share Posted December 12, 2015 Hmm it states "other Mac OS needs GenericUSBXHCI open source USB3.0 xHC driver" in the description. And as we know, that wont work with 10.11. I do not see the specific chipset mentioned. So maybe you just better go with one of the Inateck ones, they work fine (apparently all of them, including the 5 port + internal header version I have myself). Also has very mixed reviews, personally I would stay away from that. I just found out the model PME-4U is the Fresco Logic Chip FL1100. Is that the chip used on the newer Mac Pros? Anyhow I saw someone from another thread mentioned they had that one for 10.11 but never made too many comments on it is why I asked here. I'll check out the Inateck for sure. Link to comment Share on other sites More sharing options...
frankiee Posted December 12, 2015 Share Posted December 12, 2015 I just found out the model PME-4U is the Fresco Logic Chip FL1100. Is that the chip used on the newer Mac Pros? Yes, FL1100 is the chip you want. 1 Link to comment Share on other sites More sharing options...
Recommended Posts