bobstrike Posted March 26, 2013 Share Posted March 26, 2013 Hi Zenith432 I just want to say thank you for the amazing job. With your kext I finally have a working machine with SuperSpeed 3.0 and audio from RME Fireface UCX (USB 2.0 for now) at the same time. Great job. Look forward to your next version improvements Thank you !!! Link to comment Share on other sites More sharing options...
fe2babu Posted March 27, 2013 Share Posted March 27, 2013 It can work for my Acer 3830TG (VID 1033, DEV 0194, rev 04) with ver 1.1.4 kext However, sleep/wake issue occur(After wake up, Black screen). As requested: the xhcdump caps and running output without kernel flags xhcdump1.1.4.rtf Link to comment Share on other sites More sharing options...
naiclub Posted March 30, 2013 Share Posted March 30, 2013 Wow SMedia ASM1042 USB 3.0 xHCI work with asus p8z77-v le plus. Link to comment Share on other sites More sharing options...
bebop68 Posted March 30, 2013 Share Posted March 30, 2013 Is anyone having trouble downloading the binary? Mediafire seems to be on the blink but I've only tried over one 5 minute period. Link to comment Share on other sites More sharing options...
lollo78 Posted March 30, 2013 Share Posted March 30, 2013 hi, if i boot with USB 3.0 HDD connected sometimes it's not mounted at startup. if i disconnect it and reconnect it appear on Desktop (but not always). (Kext version 1.1.4) Link to comment Share on other sites More sharing options...
alexmaa Posted March 30, 2013 Share Posted March 30, 2013 (1.1.4) sleep works on Gigabyte Z77-DS3H w/ integrated HD Graphics. functionally USB3 to SATA OK but USB3 to IDE not working. Link to comment Share on other sites More sharing options...
YuTech Posted March 31, 2013 Share Posted March 31, 2013 Hello and Happy Easter to all And especially for you Zenith432 a big thank you from the bottom of my heart! I'm running Mountain Lion 10.8.3 on my HP Pavilion DV6 Notebook and my two USB 3.0 (Renesas) Slots are now working. It tested my USB Mouse and my USB 2.0 HDD, both are working perfectly. I have just two questions: 1. My sleep worked fine with the sleepenabler.kext, but now it doesn't work properly. The sleep works like usual, but when I try to wake it up the screen remains black, I also tried darkwake=0, but it didn't help. Is this a problem with the kext or maybe my DSDT? Here is my DSDT:DSDT.aml.zip 2. I have a USB Headset. The microphone and the headphones are working perfectly on the USB 2.0 slots. When I plug it in one of the two USB 3.0 slots, the system recognizes the microphone and the Headphones but they won't work. Is this a feature that is hard to add to your kext? Again a big thank you Link to comment Share on other sites More sharing options...
krrkrr Posted April 3, 2013 Share Posted April 3, 2013 Is anyone having trouble downloading the binary? Mediafire seems to be on the blink but I've only tried over one 5 minute period. I got the same pb. It keeps saying there was pb ... and that the dl will restart. then, back to the first page and again... Link to comment Share on other sites More sharing options...
leslieking Posted April 4, 2013 Share Posted April 4, 2013 I have two USB sound adapters (Behringer UCA 202 and C-Media). Both sound adapters are recognized, but neither work when plugged into USB3 ports (no sound output). I'm using GenericUSBXHCI v1.1.4 and OS X 10.8.3. The sound adapters work in USB2 ports. Link to comment Share on other sites More sharing options...
wyxz2008 Posted April 5, 2013 Share Posted April 5, 2013 I have two USB sound adapters (Behringer UCA 202 and C-Media). Both sound adapters are recognized, but neither work when plugged into USB3 ports (no sound output). I'm using GenericUSBXHCI v1.1.4 and OS X 10.8.3. The sound adapters work in USB2 ports. My sound adapter (creative audigy 2 nx) doesn't work too. Maybe it is because: Limitations: Isochronous endpoints are not supported yet. This includes anything having to do with audio or video (webcams too.) If you try to connect devices with isoch endpoints, and OS X has an upper layer driver for the device, it'll fail to configure the device and you'll probably see some messages about it from IOUSBFamily in syslog. 1 Link to comment Share on other sites More sharing options...
marcelol Posted April 6, 2013 Share Posted April 6, 2013 Does this driver support USB 3.0 hubs ( and by extension, external drives connected to the hub ) ? Anyone able to get that to run ? Link to comment Share on other sites More sharing options...
shenor Posted April 9, 2013 Share Posted April 9, 2013 Gorgeous, finaly works my usb3 correctly (z68-ud5) thanks a lot Link to comment Share on other sites More sharing options...
Sfairat Posted April 9, 2013 Share Posted April 9, 2013 First of all, thanks a lot, your kext is the only one which enables usb3.0 on my lenovo y570 with upd720200a nec/renesas usb3.0 chipset. But, now I, among some other people, have problem with wake up from sleep both on 1.1 and 1.1.4 version. It doesn't matter if any device is connected to usb3.0 port, system doesn't wake up in any case. Anyway, I value +2 usb3.0 ports more than sleep, so thanx) caps.txt running.txt Link to comment Share on other sites More sharing options...
johoe Posted April 9, 2013 Share Posted April 9, 2013 Thanks a lot for this great driver - renesas usb3.0 - working perfectly! johoe Link to comment Share on other sites More sharing options...
sapphire112 Posted April 10, 2013 Share Posted April 10, 2013 thank you Zenith432 works well on chipset VIA VL800 missing more than webcam Link to comment Share on other sites More sharing options...
Api Posted April 11, 2013 Share Posted April 11, 2013 Thanks a lot, works great on GA-H67N-USB3 with AS2105 Link to comment Share on other sites More sharing options...
jcatt Posted April 12, 2013 Share Posted April 12, 2013 First, Thanks Zenith432 for making the USB3 ports on my GA Z-68X UD3H B3 work. I do have a small issue though, since installing the .Kext whenever I insert a USB2 device (Flash Drive) I get a complete system freeze. I have tried to look into the console to see if any errors pop up, but alas none do. (Unless I am not looking in the right log) I have tried the -gux_defer_usb2 boot flag but no change in the issue. I am in the process of DL the Combo Update to 10.8.3 to see if for what ever reason that fixes the issue. (But I doubt it will) Any Idea what could be causeing the issue and what is the best way for me to log the crash? Link to comment Share on other sites More sharing options...
songuke Posted April 13, 2013 Share Posted April 13, 2013 Works great for ML 10.8.2 on Asrock Z68-Pro3-M (which comes with EtronTech EJ168A chipset), at least can read files on a USB 2.0 card reader. Haven't tested performance with USB 3.0 devices yet. Link to comment Share on other sites More sharing options...
icarl Posted April 15, 2013 Share Posted April 15, 2013 I have intel panther point controller in laptop. Using this kext my USB3.0 can now recognize USB2.0 devices. However it now makes it wake after sleep. Does one of the flags ,or any other fix for that? Link to comment Share on other sites More sharing options...
icarl Posted April 16, 2013 Share Posted April 16, 2013 For Intel Series 7, when the xhci driver initializes, it yanks control of the USB 2.0 ports away from the ehci driver (assuming the ehci driver initialized earlier). This may cause problems for some devices. I'm not sure what to do about this. For the time being, if this gives you trouble, go ahead and leave the ports with the ehci driver by "-gux_defer_usb2". You can add permanent kernel flags in /Extra/org.chameleon.Boot.plist in the "Kernel Flags" entry. Edit: Try looking in your bios settings if it's possible to route the ports to xhci from boot-time, that may also solve the problem (instead of "-gux_defer_usb2"). I uploaded v1.1.4 (see post #1). Anyone that's being having trouble with not-coming-back-from-sleep, or spontaneous-reboot-on-shutdown, I suggest you try it, as I made code for those things more robust. Hi Zenith432..thanks for the work in this. I finally got USB3.0 to recognize USB2.0 devices. When I first loaded it, devices mounted but caused wake during sleep. So reading some more I used this flag and now stays asleep, and port works for non USB3.0. Great work!! Link to comment Share on other sites More sharing options...
jcatt Posted April 16, 2013 Share Posted April 16, 2013 First, Thanks Zenith432 for making the USB3 ports on my GA Z-68X UD3H B3 work. I do have a small issue though, since installing the .Kext whenever I insert a USB2 device (Flash Drive) I get a complete system freeze. I have tried to look into the console to see if any errors pop up, but alas none do. (Unless I am not looking in the right log) I have tried the -gux_defer_usb2 boot flag but no change in the issue. I am in the process of DL the Combo Update to 10.8.3 to see if for what ever reason that fixes the issue. (But I doubt it will) Any Idea what could be causeing the issue and what is the best way for me to log the crash? *UPDATE So I managed to figure out what was causing the issues I had experienced. It turns out anytime I inserted a Mass Storage device into one of my USB2 ports, Android File Transfer was causing the kernel panic. I was only able to see it when I had booted up with the verbos logging kernel flag. I don't know why it had such an issue, could it be related to the isochronous endpoints? I have an image from the kernel panic if you want it for debuging, just let me know... Link to comment Share on other sites More sharing options...
Micky1979 Posted April 19, 2013 Share Posted April 19, 2013 @Zenith432 I would like to put GenericUSBXHCI into Pandora, there are particular conflicting kexts to remove, as PXHCD.kext, CalDigitUSBxHCI.kext and CalDigitFastIO.kext etc. if found? ... Know any others? Another thing, I can make script that allows installation only if OS is greater than or equal to 10.7.5, but this is really right, or give freedom is best? I would like to be sure that everything runs smoothly. Congratulations for this work Micky 1 Link to comment Share on other sites More sharing options...
jaminmc Posted April 19, 2013 Share Posted April 19, 2013 Woohoo!!! I finally have working UDB 3 on my EVGA Classified SR-2!! All the other USB 3 drivers I would try wouldn't show any of the devices, or they would run at USB 1 speeds.. I am getting full speed, and my USB 3 Hub is working fine too... (Shows up as both a USB 2 hub and a USB 3, Does the same on my Retina Macbook) Surprised #the beast# doesn't have this driver in it yet. Glad Pandora is getting it... I will have to checkout Pandora. About sleep, With my motherboard, I have to put it to sleep at the Login screen, then wake it up for my Blackmagic Decklink, and Firewire cards to work. Haven't tried usb3 before that stage... The LaCee Driver before would make my bootup take longer, and now my box even boots faster with this driver... I have used Seagate Backup +, a Buffalo Raid, and Lacee rugged drive all at the same time connected to my USB 3 hub. 1 Link to comment Share on other sites More sharing options...
icarl Posted April 20, 2013 Share Posted April 20, 2013 @Zenith432 I would like to put GenericUSBXHCI into Pandora, there are particular conflicting kexts to remove, as PXHCD.kext, CalDigitUSBxHCI.kext and CalDigitFastIO.kext etc. if found? ... Know any others? Another thing, I can make script that allows installation only if OS is greater than or equal to 10.7.5, but this is really right, or give freedom is best? I would like to be sure that everything runs smoothly. Congratulations for this work Micky Micky..mille grazie.. I got hdmi to work on my laptop reading your thread on it, in italian of all things. Link to comment Share on other sites More sharing options...
Micky1979 Posted April 20, 2013 Share Posted April 20, 2013 Thanks, even if this is off topic here Micky Link to comment Share on other sites More sharing options...
Recommended Posts