XPC General discussion

theGeniusIam · June 25, 2013

Hi all,

new build to d/l and test

http://www.file-upload.net/download-7757483/Efildr20.zip.html

:ninja:

Pleasse try and post feedback. Thx! :rolleyes:

Alex009988 · June 25, 2013

Hi all,

new build to d/l and test

http://www.file-upload.net/download-7757483/Efildr20.zip.html

Pleasse try and post feedback. Thx!

Hello. We are glad that the project of XPC is developed further.

I devided settings.plist on settings.plist xpc_smbios.plist and xpc_patcher.

When I load with these three ones I got this error.

After I throw away XPC_pacher.

But my Mavericks DS2 is not loaded by XPC nevertheless.

I see this picture with slide=0 or without one.

Please tell me where I mistook.

Thanks in advance!

I attached all my plists from XPC

Archive.zip

TimeWalker75a · June 25, 2013

I see this picture with slide=0 or without one.

{style_image_url}/attachicon.gif IMG_0127.JPG

Please tell me where I mistook.

Thanks in advance!

I attached all my plists from XPC

That looked like the infamous still waiting stall. Try to boot without kernel cache flag, you know which one.

Alex009988 · June 25, 2013

That looked like the infamous still waiting stall. Try to boot without kernel cache flag, you know which one.

Hello. TimeWalker.

With -f -v

I see this picture!

Any suggestions?

TimeWalker75a · June 25, 2013

Hello. TimeWalker.

With -f -v

I see this picture!

{style_image_url}/attachicon.gif image.jpg

Any suggestions?

There is no -f for xpc ...

Alex009988 · June 25, 2013

There is no -f for xpc ...

Ok with "-v No caches" the sitiation is the same.

TimeWalker75a · June 25, 2013

Your problem is the .plists you've derived from the old settings.plist

It has to be the exact match of the dictionaries in the sub-config (patcher, smbios) plists.

<key>XpcPatcher</key>
<dict>
...

</dict>

Alex009988 · June 25, 2013

Your problem is the .plists you've derived from the old settings.plist

It has to be the exact match of the dictionaries in the sub-config (patcher, smbios) plists.
<key>XpcPatcher</key>
<dict>
...

</dict>

Thank you that you try to help me. I appreciate it.

I tried several variants. And

Either so

<key>MachOPatch0</key>

..............

or so

<key>XpcPatcher</key>

<key>MachOPatch0</key>

.........

I get the error in both case.

If you could boot with the last version of XPC, could you give me your samples of settings?

Thanks in advance!

EDIT 1 ~~Stop find a mistake!~~

EDIT 2

........
<plist version="1.0">
	<key>XpcPatcher</key>
	<dict>
	<key>MachOPatch0</key> 
	<dict>
	<key>Apply</key>
	<integer>0</integer>
	<key>SystemVersion</key>
	<string>0x000</string>	
	<key>Description</key>
	<string>Patch for ALC670</string>
	<key>FileName</key>
	<string>AppleHDA</string>
	<key>Search</key>
	<string>8408ec10</string>
	<key>Replace</key>
	<string>00000000</string>
	</dict>
.............

In this case I got the error as well

"Error parsing patcher settings Unsupported

Press key to continue..."

Edited June 25, 2013 by Alex Auditore

TimeWalker75a · June 25, 2013

The forum glitched and posted only half a message, omitting the rest of my comment. I was referring to

<key>SmbiosTables</key>
<dict>
....
</dict>

Damnit .. it happened again! I'm not willing to repeat myself a hundred times.Basically the kext patcher is broken for now or the patch entries have to be named in some other manner, because trying any form or combination of the xpc_patcher.plist I was unable to get any results from it. Since iPhoneTom never commented on that it still remains a mystery. Sticking with 90.41 for now..

Alex009988 · June 25, 2013

Confirm it.

With this variant it also don't work or don't boot the system and I get this picture

http://www.insanelymac.com/forum/topic/286379-xpc-general-discussion/?p=1927776

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
	<key>SmbiosTables</key>
	<dict>
		<key>Table_01</key>
		<dict>
			<key>BiosReleaseDate</key>
			<string>07/26/10</string>
			<key>BiosVendor</key>
			<string>Apple Inc.</string>
			<key>BiosVersion</key>
...........

Alex009988 · June 26, 2013

Hi all,

new build to d/l and test

http://www.file-upload.net/download-7757483/Efildr20.zip.html

Pleasse try and post feedback. Thx!

Hello. Some people ask to compile XPC for 32-bit machines. Is it possible? I think it will widen scope of XPC.

Regards.

theGeniusIam · June 26, 2013

Confirm it.

With this variant it also don't work or don't boot the system and I get this picture

http://www.insanelymac.com/forum/topic/286379-xpc-general-discussion/?p=1927776
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
	<key>SmbiosTables</key>
	<dict>
		<key>Table_01</key>
		<dict>
			<key>BiosReleaseDate</key>
			<string>07/26/10</string>
			<key>BiosVendor</key>
			<string>Apple Inc.</string>
			<key>BiosVersion</key>
...........

After the <plist ..> tag there must be an <dict>. Look my working example for xpc_patcher.plist at http://pastie.org/8081760

For all patches you need, set Apply to 1. If set to 0, the patch will be ignored.

Edited June 26, 2013 by theGeniusIam

TimeWalker75a · June 26, 2013

After the tag there must be an . Look my working example for xpc_patcher.plist at http://pastie.org/8081760

For all patches you need, set Apply to 1. If set to 0, the patch will be ignored.

Im afraid I've tried it like that, it doesn't work for me.

theGeniusIam · June 26, 2013

Im afraid I've tried it like that, it doesn't work for me.

Can you upload the fiule for me to test?

Alex009988 · June 26, 2013

After the <plist ..> tag there must be an <dict>. Look my working example for xpc_patcher.plist at http://pastie.org/8081760

For all patches you need, set Apply to 1. If set to 0, the patch will be ignored.

Year Now the mistake with patcher disappeared but my Movericks is not booted as yet. And I see it as well

http://www.insanelymac.com/forum/topic/286379-xpc-general-discussion/?p=1927776

TimeWalker75a · June 26, 2013

Can you upload the fiule for me to test?

Sure pastie.org/8079942

This was a pure example of the structure, as the PATCHES are specific fir my hardware snd you wouldn't be able to tell ok If they work.

theGeniusIam · June 26, 2013

Year Now the mistake with patcher disappeared but my Movericks is not booted as yet. And I see it as well

http://www.insanelymac.com/forum/topic/286379-xpc-general-discussion/?p=1927776

You should change the smbios settings to an supported maschine. This is because the original boot.efi checks products upon boot.

TimeWalker75a · June 26, 2013

Right, this are the patches I'm trying to get to work: http://pastie.org/8081894

They both work absolutely fine with the previous build (90.41), while being included in the settings.plist

Alex009988 · June 26, 2013

You should change the smbios settings to an supported maschine. This is because the original boot.efi checks products upon boot.

I don't understand.

I changed my model from MacBookPro6.1 to 8.3 and see the same error.

I afraid the last model of MacBookPro will be working a bit wrongly or not.

Please give me a tip about which model should I сhoose?

xpc_smbios.plist.zip

TimeWalker75a · June 26, 2013

You cant even put a proper plist together after two people told you you are missing the dictionary?

http://grab.by/nU4g

http://grab.by/nU4y

theGeniusIam · June 26, 2013

I don't understand.

I changed my model from MacBookPro6.1 to 8.3 and see the same error.

I afraid the last model of MacBookPro will be working a bit wrongly or not.

Please give me a tip about which model should I сhoose?

For me MacBookPro10,3 is working.

Alex009988 · June 26, 2013

For me MacBookPro10,3 is working.

Again!

Everything is the same The mistake with product name.

I tried with MacBookPro6.1 and 10.1 and without success.

You cant even put a proper plist together after two people told you you are missing the dictionary?

http://grab.by/nU4g

http://grab.by/nU4y

I tried this way and that and both of them without success.

Unfortunately I demolished my ML and can't check on it.

Now I have only Mavericks which isn't on friendly terms with XPC!

Archive.zip

Edited June 26, 2013 by Alex Auditore

theGeniusIam · June 26, 2013

Again!

Everything is the same The mistake with product name.

I tried with MacBookPro6.1 and 10.1 and without success.

I tried this way and that and both of them without success.

Unfortunately I demolished my ML and can't check on it.

Now I have only Mavericks which isn't on friendly terms with XPC!

Can you upload your xpc_smbios.plist?

Alex009988 · June 26, 2013

Sure(I also added to 122message in Archive)

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
   <dict>
	<key>SmbiosTables</key>
		<key>Table_01</key>
		<dict>
			<key>BiosReleaseDate</key>
			<string>05/10/12</string>
			<key>BiosVendor</key>
			<string>Apple Inc.</string>
			<key>BiosVersion</key>
			<string>MBP101.88Z.00EE.B00.1205101839</string>
			<key>Type</key>
			<integer>0</integer>
		</dict>
		<key>Table_02</key>
		<dict>
			<key>Family</key>
			<string>MacBookPro</string>
			<key>Manufacturer</key>
			<string>Apple Inc.</string>
			<key>ProductName</key>
			<string>MacBookPro10,1</string>
			<key>SKUNumber</key>
			<string>System SKU#</string>
			<key>SerialNumber</key>
			<string>C02K5287DKQ1</string>
			<key>Type</key>
			<integer>1</integer>
			<key>Version</key>
			<string>2.6</string>
		</dict>
		<key>Table_03</key>
		<dict>
			<key>AssetTag</key>
			<string>MacBook Pro</string>
			<key>BoardType</key>
			<integer>10</integer>
			<key>LocationInChassis</key>
			<string>Part Component</string>
			<key>Manufacturer</key>
			<string>Apple Inc.</string>
			<key>ProductName</key>
			<string>Mac-C3EC7CD22292981F</string>
			<key>SerialNumber</key>
			<string>C02K5287DKQ1</string>
			<key>Type</key>
			<integer>2</integer>
			<key>Version</key>
			<string>2.6</string>
		</dict>
		<key>Table_04</key>
		<dict>
			<key>AssetTag</key>
			<string>MacBook Pro</string>
			<key>ChassisType</key>
			<integer>2</integer>
			<key>Manufacturer</key>
			<string>Apple Inc.</string>
			<key>SerialNumber</key>
			<string>C02K5287DKQ1</string>
			<key>Type</key>
			<integer>3</integer>
			<key>Version</key>
			<string>2.6</string>
		</dict>
		</dict>
</plist>

The last variant.

TimeWalker75a · June 26, 2013

Dude, stop acting retarded... SmbiosTable is a dictionary.

http://grab.by/nUaU

XPC General discussion

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites