spakk Posted May 9, 2013 Share Posted May 9, 2013 (edited) oups, this will be a hard and sleepless night thanks , Ifire I have now installed on the first partition and Enoch will now risk a test run Edited May 9, 2013 by spakk Link to comment Share on other sites More sharing options...
JorgeMax Posted May 9, 2013 Share Posted May 9, 2013 Is this file iFIRE?: MacPro Jorge.ioreg (2.3 MB) https://mega.co.nz/#!0p4GQKZJ!IjuBcBfVyxr0U9uh2moUCxhrhRcaz5WV4LErkN2XqhI Link to comment Share on other sites More sharing options...
spakk Posted May 9, 2013 Share Posted May 9, 2013 FakeSMC is actually twice, was removed Can not load kext com.apple.NVDAResman - failed to resolve library dependencies. Kext com.apple.NVDAResman failed to load (0xdc00800e) I can not find any clear information about it, perhaps on the high graphics resolution to 1600x1200x32, I have now changed it to 1680x1050x32. USBF: 37.924 AppleUSBOHCI[0xffffff8020631000]::CheckSleepCapability - controller will be unloaded across sleep Unfortunately, the problem I had from the beginning, I just do not get it fixed Link to comment Share on other sites More sharing options...
JorgeMax Posted May 9, 2013 Share Posted May 9, 2013 iFIRE, I think the "framebuffer" ideal for my video card is "chutoro" and not "Aji", this is causing the same problems in graphs. To tell the truth, the two are the same. Link to comment Share on other sites More sharing options...
spakk Posted May 9, 2013 Share Posted May 9, 2013 HFS: Vol: Flash Player Very Low Disk: freeblks: 0, dangerlimit: 90 Sandbox: sandboxd(792) deny mach-lookup com.apple.coresymbolicationd ERROR: user_trap(0x23d052d0) type=13 vaddr=0x0000000005114aec Sandbox: xpcd(221) deny ipc-posix-shm-read-data /tmp/com.apple.csseed.63 Sandbox: sandboxd(1088) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(1105) deny mach-lookup com.apple.coresymbolicationd no idea, I just got the flash player installed Link to comment Share on other sites More sharing options...
iFIRE Posted May 9, 2013 Share Posted May 9, 2013 POST Your IOREG, spakk, and install the kext lspci.kext jorge. change in your boot.plist to GraphicsEnabler=No , put this new DSDT in extra, now with F Chutoro, and in terminal app type these two code, but first you need install lspci.kext ioreg | grep ATY sudo kextstat | grep AMD this is the result for me, post your. sudo kextstat | grep AMD 63 2 0xffffff7f80ba9000 0x1d8000 0x1d8000 com.apple.kext.AMDSupport (8.0.0) <62 10 9 7 5 4 3 1> 64 0 0xffffff7f80d81000 0x41000 0x41000 com.apple.kext.AMD5000Controller (8.0.0) <63 62 10 9 5 4 3 1> 75 0 0xffffff7f80e62000 0x3cd000 0x3cd000 com.apple.AMDRadeonAccelerator (1.0.0) <74 73 62 10 7 5 4 3 1> 77 0 0xffffff7f812ca000 0x13000 0x13000 com.apple.kext.AMDFramebuffer (8.0.0) <63 62 10 9 7 5 4 3 1> bash-3.2# ioreg | grep ATY | | | | +-o ATY,Vervet@0 <class AtiFbStub, id 0x10000035e, registered, matched, active, busy 0 (90 ms), retain 8> | | | | | +-o ATY_Vervet <class AMDFramebuffer, id 0x10000036b, registered, matched, active, busy 0 (16 ms), retain 18> | | | | +-o ATY,Vervet@1 <class AtiFbStub, id 0x10000035f, registered, matched, active, busy 0 (0 ms), retain 8> | | | | | +-o ATY_Vervet <class AMDFramebuffer, id 0x100000379, registered, matched, active, busy 0 (0 ms), retain 14> | | | | +-o ATY,Vervet@2 <class AtiFbStub, id 0x100000360, registered, matched, active, busy 0 (0 ms), retain 8> | | | | | +-o ATY_Vervet <class AMDFramebuffer, id 0x10000037f, registered, matched, active, busy 0 (0 ms), retain 14> | | | | +-o ATY,Vervet@3 <class AtiFbStub, id 0x100000361, registered, matched, active, busy 0 (0 ms), retain 8> | | | | | +-o ATY_Vervet <class AMDFramebuffer, id 0x100000385, registered, matched, active, busy 0 (0 ms), retain 14> bash-3.2# DSDT Jorge.zip Link to comment Share on other sites More sharing options...
iFIRE Posted May 10, 2013 Share Posted May 10, 2013 SPAKK DSDT.zip spakk, try this new DSDT with all usuals patches, this can fix your problem with USB, the graphic card I don't inject because you not have posted IOREG 1 Link to comment Share on other sites More sharing options...
theconnactic Posted May 10, 2013 Share Posted May 10, 2013 Man, the topic was positively hijacked. I'll transfer all posts from here to where they belong, the help topic. Much appreciated! Link to comment Share on other sites More sharing options...
JorgeMax Posted May 10, 2013 Share Posted May 10, 2013 Man, the topic was positively hijacked. I'll transfer all posts from here to where they belong, the help topic. Much appreciated! Amigo, onde fica o post de ajuda? Obrigado. Link to comment Share on other sites More sharing options...
spakk Posted May 10, 2013 Share Posted May 10, 2013 Hi Ifire , First of all thank you for the revision of the DSDT.aml. the IOREG.txt is located in the darwinDumper_spakk- folder Link to comment Share on other sites More sharing options...
iFIRE Posted May 10, 2013 Share Posted May 10, 2013 ok, but in text format is not good for search info, try this one and save as in menu bar archive IORegistryExplorer.zip Link to comment Share on other sites More sharing options...
spakk Posted May 10, 2013 Share Posted May 10, 2013 after I changed the new DSDT.aml and chameleon.boot.plist and deleted the FakeSMC.kext from S/L/E and start the system, I get every time a KP on both partitions.it's crazy Link to comment Share on other sites More sharing options...
iFIRE Posted May 10, 2013 Share Posted May 10, 2013 take a photo and post here Link to comment Share on other sites More sharing options...
spakk Posted May 10, 2013 Share Posted May 10, 2013 here DarwinDumper again after I've changed chameleon.boot.plist and the dsdt, about an hour ago last KP about 5 minutes after I start IoregExplorer see Pic next KP from the other partition before I wanted to upload the ioreg here is my ioreg, see spakk’s iMac.rar DarwinDumper.rar spakk’s iMac.rar Link to comment Share on other sites More sharing options...
spakk Posted May 10, 2013 Share Posted May 10, 2013 Problem is AMD, as the first lines in screenshots show. Please make detailed statement that is vague with the other settings I had not this problem, anything caused these problems, but what? Link to comment Share on other sites More sharing options...
iFIRE Posted May 10, 2013 Share Posted May 10, 2013 try boot with no smbios and see what model the system set for your machine 1 Link to comment Share on other sites More sharing options...
spakk Posted May 10, 2013 Share Posted May 10, 2013 (edited) try boot with no smbios and see what model the system set for your machine I lie in bed and write at the moment with my laptop, I'll test it tomorrow, thx for the answer Ifire. I see this as a test and would like to learn more background knowledge. I can put the backup back any time. thx for your help Ifire :wink2: I am very grateful if you could add my Nvidia graphics card in my DSDT.aml Edited May 10, 2013 by spakk Link to comment Share on other sites More sharing options...
JorgeMax Posted May 11, 2013 Share Posted May 11, 2013 iFIRE, here is a topic to address problems with the DSDT or not? I'm still having problems with mine. Link to comment Share on other sites More sharing options...
spakk Posted May 11, 2013 Share Posted May 11, 2013 (edited) try boot with no smbios and see what model the system set for your machine on the first partition, the same problem after every start a KP. On the second partition, see picture, after I started the disk utility. starts without smbios.plist (for iMac13, 2) iFIRE, here is a topic to address problems with the DSDT or not? I'm still having problems with mine. my initial problem that the OpenGL viewer, despite with the custom dsdt, displayed an incorrect value of my video memory, instead of 3072 MB is displayed 0MB. so, here is the topic for dsdt problems! it's my fault! my problem is due to the problem with the custom dsdt from IFire, I now wait that theconnactic shifts my post in the right topic, I'm sorry Edited May 11, 2013 by spakk Link to comment Share on other sites More sharing options...
iFIRE Posted May 11, 2013 Share Posted May 11, 2013 OK, NEW DSDT, with minimal patch, EHCI, IRQS, SHUTDOWN, DGTP, HID/CID,GRAPHICS, note that in the injection of your graphics, you only need change NVCAP FROM dsdt , you can extract it from win or google it spakk Graphics DSDT.zip EDIT: Turn off your USB 3.0 in the bios, then reboot and in terminal app put this code and look in the desktop your boot log if have any problem with USBs sudo dmesg > ~/Desktop/boot.text 1 Link to comment Share on other sites More sharing options...
spakk Posted May 11, 2013 Share Posted May 11, 2013 I will test it now and I'll report back, thx Link to comment Share on other sites More sharing options...
spakk Posted May 11, 2013 Share Posted May 11, 2013 the new dsdt works very well up to now, no KP, I'm using Everest Ultimate to create a video bios dump and to integrate with NVCAB Maker the NVCAB data in the dsdt but NVCAB maker does not seem to work, it's crazy Link to comment Share on other sites More sharing options...
iFIRE Posted May 11, 2013 Share Posted May 11, 2013 NVCAP Maker 1.4.zip try this one. Link to comment Share on other sites More sharing options...
spakk Posted May 11, 2013 Share Posted May 11, 2013 (edited) I used the same version, it does not open, very crazy how can I still do that, with OSx86 tool, that should work, or? I'll be in touch again, Edited May 11, 2013 by spakk Link to comment Share on other sites More sharing options...
spakk Posted May 11, 2013 Share Posted May 11, 2013 can anyone open this VGABios.rom / VGABios.dump with NVCAP Maker VGA Bios GTX550TI.zip Link to comment Share on other sites More sharing options...
Recommended Posts