Tonio1987 Posted February 11, 2013 Share Posted February 11, 2013 My multiplier is 24x instead of 26x Link to comment Share on other sites More sharing options...
Piuma Posted February 11, 2013 Author Share Posted February 11, 2013 yes me too x28 instead of x30 (but it's ok for me, i hope it steps up to x28 when in full load) I'm trying the first SSDT from Lejenk (with smsbios 8,1) it seems to work better during benchmark! Is possible, Lejenk? Another question: with my original macbook I use smc fan control. I tryed with my hackbook and the program simply doesn't start. There is a way to control fans in an hackintosh? Link to comment Share on other sites More sharing options...
Tonio1987 Posted February 11, 2013 Share Posted February 11, 2013 it's ok your touchpad work ?? Link to comment Share on other sites More sharing options...
Piuma Posted February 11, 2013 Author Share Posted February 11, 2013 Yes, using the first SSDT from Lejenk I score in Geekbench 32bit: 6591 Before, using the last SSDT from Lejenk I score: 4950 Now I try toucpad Link to comment Share on other sites More sharing options...
Piuma Posted February 11, 2013 Author Share Posted February 11, 2013 BUAHAAHA Touchpad Works!! Incredible! Tonio, you got 3 finger also?? Link to comment Share on other sites More sharing options...
Tonio1987 Posted February 11, 2013 Share Posted February 11, 2013 with the first ssdt and macbook pro 8.1, I am blocked to 1.58ghz It it this : http://www.insanelymac.com/forum/topic/286196-help-asus-a56cm-k56cm-s56cm/page__st__80#entry1887642 ? No I don't have 3 finger Link to comment Share on other sites More sharing options...
Piuma Posted February 11, 2013 Author Share Posted February 11, 2013 Tonio! Try with this! With Elan Beta v4 i have trackpad enabled in system preferencies, but it don't work, there are a lot of glitches, for you too? SSDT.zip 1 Link to comment Share on other sites More sharing options...
Tonio1987 Posted February 11, 2013 Share Posted February 11, 2013 must move the sliders in preference after his work HOW TO INSTALL: [Remove all the kexts related to this before installing] To install this, you have to remove existing Apple PS2 Controller, VoodooPS2Controller, AppleACPIPS2Nub, ApplePS2 Keyboard, old ElanTouchpad Kexts and install only the attached ApplePS2Controller and Touchpad Kexts inside the file, since there is some dependency between the Controller and Touchpad kext for some features to work. SCROLLING - SINGLE AND TWO FINGERS We have to change the Scroll speed value in the Trackpad pane once after installing to get this work. trackpad in system preferencies work for me I test SSDT Link to comment Share on other sites More sharing options...
Piuma Posted February 11, 2013 Author Share Posted February 11, 2013 but you have 3 fingers works? Link to comment Share on other sites More sharing options...
Tonio1987 Posted February 11, 2013 Share Posted February 11, 2013 ah no I don't have 3 fingers not work Good I have 5700 with this SSDT, I have win 1700 points tnx Tonio! Try with this! With Elan Beta v4 i have trackpad enabled in system preferencies, but it don't work, there are a lot of glitches, for you too? 1 Link to comment Share on other sites More sharing options...
WaldMeister Posted February 11, 2013 Share Posted February 11, 2013 yes me too x28 instead of x30 (but it's ok for me, i hope it steps up to x28 when in full load) I'm trying the first SSDT from Lejenk (with smsbios 8,1) it seems to work better during benchmark! Is possible, Lejenk? Another question: with my original macbook I use smc fan control. I tryed with my hackbook and the program simply doesn't start. There is a way to control fans in an hackintosh? Can be possible that the first one works better. Use FakeSMC with plugins, and HWMonitor. But i don't know if you have fan control, the program never worked for me. Link to comment Share on other sites More sharing options...
Piuma Posted February 11, 2013 Author Share Posted February 11, 2013 (edited) ok trackpad is ok, only a minor glitch when i try to "duobleclick+hold+movewindows" ops, sorry if i'm wrong. I just wanted to share the news that we are receiving a new kext for the 3 fingers soon. Any suggestion to make FN hotkey works?? Actually i found "pause-interr" is the only shortcut that works (brightness up). Also works FN+F1= SLEEP but all the others hotkey aren't working now Edited February 11, 2013 by fantomas1 Link to comment Share on other sites More sharing options...
fantomas Posted February 11, 2013 Share Posted February 11, 2013 be careful the next time, pls we take the spam very seriously the next time it's the ban without warning Cordially, staff 1 Link to comment Share on other sites More sharing options...
Tonio1987 Posted February 11, 2013 Share Posted February 11, 2013 Lejenk Nvidia Optimus is disable in the DSDT or just by the kext delete ? I have 2 hours batery life (in windows I have 4h30) and my cpu is about 55°c (in windows 40°c, I have thermal paste MX4 ^^) Extract your SSDTs (via some livelinux and acpidump or so) Open them in a DSDT-Editor (like this one http://www.insanelym... ... pic=223205) and look for the one which says NVidiaOptimusTable (like NvOptTbl or so) Look in this SSDT for a method called "OFF" or "OPOF" Copy this method into the "/" scope of your DSDT and hit compile... and it will fail Look where the missing variables are defined in the SSDT from before and copy the whole operationarea to where you pasted the OFF-method Repeat until it compiles just fine Call the OFF-method by adding "OFF()" (or whatever your method is called) to the _WAK method in your DSDT Install the DSDT and reboot Look in the systeminfo under Graphics/Displays. the nvidia should now not be listed anymore. if it is, there was some error. Link to comment Share on other sites More sharing options...
WaldMeister Posted February 11, 2013 Share Posted February 11, 2013 Only by kexts. I tried this on my own DSDT last night, been at it for 5 hours, and it did not work for me, have to look into it again. So i can't help with that, good luck. Link to comment Share on other sites More sharing options...
Tonio1987 Posted February 11, 2013 Share Posted February 11, 2013 ok thank you for everything. I'm happy with my hackbook :-) Only by kexts. I tried this on my own DSDT last night, been at it for 5 hours, and it did not work for me, have to look into it again. So i can't help with that, good luck. 1 Link to comment Share on other sites More sharing options...
Piuma Posted February 11, 2013 Author Share Posted February 11, 2013 Nothing about hotkey my friends? Link to comment Share on other sites More sharing options...
Tonio1987 Posted February 11, 2013 Share Posted February 11, 2013 no not work fn keys Link to comment Share on other sites More sharing options...
Piuma Posted February 11, 2013 Author Share Posted February 11, 2013 I found a way to acces the apple store. We need to combine efi strings of hd4000 and ethernet (to find ethernet one use efi studio). To combine the 2 efi strings we can use osx86tools. The result must be used in boot.plist instead of the single hd4000 string. The only ethernet efi string must be copied with efi studio in com.apple.Boot.plist ( /library/preferences/SystemConfiguration ) Link to comment Share on other sites More sharing options...
Tonio1987 Posted February 11, 2013 Share Posted February 11, 2013 apple store has always worked well for me. I am doing the update 10.8.2 to try (on another hard drive ^^) I could not patching the SSDT to disable optimus, it's too hard I understand nothing Link to comment Share on other sites More sharing options...
Piuma Posted February 11, 2013 Author Share Posted February 11, 2013 we have to try some files for FN hotkeys. I know the instruction are in iowmifamily.kext ps: for the lack of the 3 fingers and problems with moving windows I suggest you download fleliglass from AppleStore, is to buy but very nice Lejenk has apple store not working Link to comment Share on other sites More sharing options...
Tonio1987 Posted February 11, 2013 Share Posted February 11, 2013 I tried flexiglass but I don't like, I never use 3 fingers on the touchpad. Link to comment Share on other sites More sharing options...
WaldMeister Posted February 11, 2013 Share Posted February 11, 2013 Lejenk has apple store not working My system is completely different And fixed it by now. Link to comment Share on other sites More sharing options...
Tonio1987 Posted February 12, 2013 Share Posted February 12, 2013 Codec_dump.txt is good ? I can not have a applehda.kext works... edit : Lejenk Have you try this patch for disable optimus ? Store (Package (0x02) { "AAPL00,DualLink", Buffer (0x04) { 0x01, 0x00, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) \_SB.PCI0.PEG0.GFX0.DOFF () Return (Local0) ..................... Method (WAK, 1, NotSerialized) { \_SB.ATKD.GENW (Arg0) \_SB.PCI0.GFX0.OWAK (Arg0) \OEMW (Arg0) \_SB.PCI0.PEG0.GFX0.DOFF () codec_dump.txt 1 Link to comment Share on other sites More sharing options...
WaldMeister Posted February 12, 2013 Share Posted February 12, 2013 Codec: Realtek ALC270 Files attached. Install the AppleHDA to /System/Library/Extensions. If VoodooHDA is installed remove it. Rename and replace the DSDT, it has a modified HDEF section. If this does not work, i'll try to patch the hda myself. Got it from here: http://www.osx86.net...hda_alc270.html Edit: Error corrected. Audio.zip Link to comment Share on other sites More sharing options...
Recommended Posts