Blaggah Posted February 12, 2018 Share Posted February 12, 2018 Ok great, I'll give it a twirl later on tonight. Link to comment Share on other sites More sharing options...
Baio77 Posted February 12, 2018 Share Posted February 12, 2018 Ok great, I'll give it a twirl later on tonight. if you have problems yet, leave your Clover folder here so check ,I'm sorry guys if I can not, it's not so easy for me to help remotely Link to comment Share on other sites More sharing options...
inetusr Posted February 12, 2018 Share Posted February 12, 2018 Unfortunately the same as before. Installed Clover 2.4_r4414 Deleted all files in EFI/kexts/10.13 and EFI/kexts/Other Copied kexts you provided into EFI/kexts/10.13 and EFI/kexts/Others Replaced config.plst with yours. Tried all 3 usb ports CLOVER.zip Link to comment Share on other sites More sharing options...
Baio77 Posted February 12, 2018 Share Posted February 12, 2018 Unfortunately the same as before. Installed Clover 2.4_r4414 Deleted all files in EFI/kexts/10.13 and EFI/kexts/Other Copied kexts you provided into EFI/kexts/10.13 and EFI/kexts/Others Replaced config.plst with yours. Tried all 3 usb ports KEXT or in 10.13 or in Other you have installed in UEFI, you need to install in Legacy ESP your bios legacy Link to comment Share on other sites More sharing options...
inetusr Posted February 12, 2018 Share Posted February 12, 2018 KEXT or in 10.13 or in Other you have installed in UEFI, you need to install in Legacy ESP your bios legacy Same. Clover logo looking a little weird.. Link to comment Share on other sites More sharing options...
Baio77 Posted February 12, 2018 Share Posted February 12, 2018 Same. Clover logo looking a little weird.. You have ONLY driver uefi64 , in this photo my Clover Legacy bios Driver64 Link to comment Share on other sites More sharing options...
inetusr Posted February 12, 2018 Share Posted February 12, 2018 Installed into legacy. These settings correct? Link to comment Share on other sites More sharing options...
Baio77 Posted February 12, 2018 Share Posted February 12, 2018 ok great, you have the rev 4414 then a beta, the official release to date is the 4411 .......... I do not know if this is good Yes NOW is correct post your Clover now in bios options ahci ?? Auto and .... ??? 1 Link to comment Share on other sites More sharing options...
inetusr Posted February 12, 2018 Share Posted February 12, 2018 Okay, using Clover v.4411 as you suggested. Tried BIOS AHCI Enabled or Auto. Houston, we still have a problem Link to comment Share on other sites More sharing options...
Baio77 Posted February 12, 2018 Share Posted February 12, 2018 OK ENABLED ,leave it like this Inetusr we try to fix the Clover folder, then let's configure x the best the Bios .... Post the Clover folder now, check everything for security ... I'm sorry if I'm NOT effective with help, but it's not easy from here You should post the precise model of the Notebook, so I search the net info utily, if there are any Link to comment Share on other sites More sharing options...
inetusr Posted February 12, 2018 Share Posted February 12, 2018 OK ENABLED ,leave it like this Inetusr we try to fix the Clover folder, then let's configure x the best the Bios .... Post the Clover folder now, check everything for security ... I'm sorry if I'm NOT effective with help, but it's not easy from here No problem, sir! Take your time and thank you for help. Here is a clover folder. Maybe I need to move kexts from 10.13 into Others ? USB flash made by UniBst also goes to BlackScreen and reboot. Since there no verbose info displayed on the screen (even with -v flag) I can't understand what is currently going on while it boot up. I can replace HDD from SSD Plextor to native WD320 (non-ssd) and check it again if neccesasry. Laptop Samsung NP-R730-JB01RU CLOVER.zip Link to comment Share on other sites More sharing options...
Baio77 Posted February 12, 2018 Share Posted February 12, 2018 No problem, sir! Take your time and thank you for help. Here is a clover folder. Maybe I need to move kexts from 10.13 into Others ? Laptop Samsung NP-R730-JB01RU OK it goes ALL fine so (at least I think) copy this folder in your Clover, you're installing 10.13, how? APFS or HFS ???? drivers64.zip Link to comment Share on other sites More sharing options...
inetusr Posted February 12, 2018 Share Posted February 12, 2018 Yep, there is my way. My main computer is running under High Sierra with APFS installed from same USB stick. Downloaded with App Store mcOS High Sierra installer.app Formatted USB Kingston Data Traveller 32 GB USB 3.0 with Disk Utility, set as GUID and MacOs Extended Journaled Using PandoraBox to install into usb stick Install Clover 4411 Replaces config.plist, kexts and drivers64 with your files. Booting with Clover. Clover boot ok. A kind of street magic starts here.. Link to comment Share on other sites More sharing options...
Baio77 Posted February 12, 2018 Share Posted February 12, 2018 Yep, there is my way. My main computer is running under High Sierra with APFS installed from same USB stick. Downloaded with App Store mcOS High Sierra installer.app Formatted USB Kingston Data Traveller 32 GB USB 3.0 with Disk Utility, set as GUID and MacOs Extended Journaled Using PandoraBox to install into usb stick Install Clover 4411 Replaces config.plist, kexts and drivers64 with your files. Booting with Clover. Clover boot ok. A kind of street magic starts here.. head with this then leave it, better settings, added change SAT0 to SATA config.plist.zip Link to comment Share on other sites More sharing options...
inetusr Posted February 12, 2018 Share Posted February 12, 2018 Replaced with your new config.plst. Clover boots as usual but now it is not rebooting, just stuck on black screen and nothing happens until I push the power button. Here is BIOS boot priority attached. I will try another USB 3.0 stick. Just founded that it is possible to format USB into APFS with Disk Util. Update: APFS not supported by Pandora Box. Link to comment Share on other sites More sharing options...
Baio77 Posted February 12, 2018 Share Posted February 12, 2018 in USB you have to install normally, the choice HFS or APFS is only valid when installing on HDD \ SSD ............. We assess the situation: The clover folder uses the one I passed you, with the last configplist inserted. With this folder still usual mistake? If we analyze the Bios, post as many photos as possible ... Personally else I can not advise you .... I do not understand where the error is, the verbose do you see it ??? Formatt your stick usb : Link to comment Share on other sites More sharing options...
inetusr Posted February 12, 2018 Share Posted February 12, 2018 Okay, processing with another usb stick Jet TranceFlash 16 GB. Formatted with Disk Utility (Mac OS Extended with Journal) Copied with Pandora's Box distro into flash. Do not deleted System/Library/Extensions/AppleIntelHDGraphicsFB.kext Replaced config.plst with latest your config. Trying to boot in EFI mode -> same situation, reboot. Install clover 4411 into usb flash with Legacy instead UEFI. Replaced driver64 with yours -> same situation, reboot. Deleted System/Library/Extensions/AppleIntelHDGraphicsFB.kext -> same situation, reboot. In all cases no verbose or other text on screen after I push the enter in Clover (even -v flag). Here is my latest EFI/CLOVER folder. I'm using latest BIOS ver. 08JV as mentioned on official Samsung website CLOVER.zip Link to comment Share on other sites More sharing options...
Baio77 Posted February 12, 2018 Share Posted February 12, 2018 I do not know what to try, the Clover folder looks OK, but you CAN NOT install, x via the black screen with or without fake id, always black screen .......... Quite right???Tomorrow in the evening we'll see to go further Link to comment Share on other sites More sharing options...
inetusr Posted February 13, 2018 Share Posted February 13, 2018 I do not know what to try, the Clover folder looks OK, but you CAN NOT install, x via the black screen with or without fake id, always black screen .......... Quite right??? Yes, all the same, unfortunately Replacing HDD did not help. Looks like this issue is not a hardware problem because as I said before Ubuntu works pretty well. Anyway thank you for you time. Link to comment Share on other sites More sharing options...
Baio77 Posted February 13, 2018 Share Posted February 13, 2018 I do not know how to help you, as soon as I leave work I look for info Link to comment Share on other sites More sharing options...
inetusr Posted February 13, 2018 Share Posted February 13, 2018 No problem, you already helped. Anyway keep using Ubuntu at this point 1 Link to comment Share on other sites More sharing options...
Sheyna Posted February 18, 2018 Share Posted February 18, 2018 Greetings to all! Help, please, understand the beginner with the problem There is iron: Laptop Acer ASPIRE 5742G-386G32Mnkk Processor Intel Core i3 380M 2533 MHz Processor core Arrandale Number of processor cores 2 L2 cache capacity 512 KB Cache capacity L3 3 MB Chipset Intel HM55 Video processor NVIDIA GeForce 610M 1024 MB GDDR3 Nvidia optimus (Disconnected via SSDT) PCH_LVDS (0x000e1180): 0x80300302 (enabled, pipe A, 18 bit, 1 channel) I'm trying to install OSX 10.10.5 I can not get a good Intel HD Graphic 1st generation. When I install SingleLink, the screen works with artifacts. When I boot into a safe-fashion screen with the desired resolution, but without QE / CI I tried to put all the frameworks LW1-4. The screen shows only when LW1. natit.kext, EDID injection - did not help. PatchVBIOS is connected, Intel injection is disabled in the clover Thank you in advance for your cooperation P.S. Sorry for my english, I'm using a translator DSDT+SSDT.rar Link to comment Share on other sites More sharing options...
chris1111 Posted February 18, 2018 Share Posted February 18, 2018 Greetings to all! Help, please, understand the beginner with the problem There is iron: Laptop Acer ASPIRE 5742G-386G32Mnkk Processor Intel Core i3 380M 2533 MHz Processor core Arrandale Number of processor cores 2 L2 cache capacity 512 KB Cache capacity L3 3 MB Chipset Intel HM55 Video processor NVIDIA GeForce 610M 1024 MB GDDR3 Nvidia optimus (Disconnected via SSDT) PCH_LVDS (0x000e1180): 0x80300302 (enabled, pipe A, 18 bit, 1 channel) I'm trying to install OSX 10.10.5 I can not get a good Intel HD Graphic 1st generation. When I install SingleLink, the screen works with artifacts. When I boot into a safe-fashion screen with the desired resolution, but without QE / CI I tried to put all the frameworks LW1-4. The screen shows only when LW1. natit.kext, EDID injection - did not help. PatchVBIOS is connected, Intel injection is disabled in the clover Thank you in advance for your cooperation P.S. Sorry for my english, I'm using a translator Why not trying everything possible to make the NVIDIA GeForce 610M working ?? I don't think you have a real Optimus with a First Gen Intel Core CPU Link to comment Share on other sites More sharing options...
MacPeet Posted February 18, 2018 Share Posted February 18, 2018 I also have i3 380M in my Medion laptop. SMBIOS - MacBook Pro 6.1 For me 17.3 "display with 1600x900 (Alternate LW1). Everything works fine in Yosemite and High Sierra. Disable Nvidia (optimus) in bios or disable it in the DSDT or Bootflag -nv_disable = 1 no natit.kext, no EDID injection here All kext are too big for upload. Each 4 Kext from here and my Framebuffer kext from Archiv.zip try (original exchange in S/L/E). 10.12 or 10.13: http://www.insanelymac.com/forum/files/file/208-1st-gen-intel-hd-graphics-kexts/ And for 10.10.5: http://www.insanelymac.com/forum/index.php?app=downloads&module=display§ion=download&do=version_download&id=541&record=11476 Archiv.zip Try this! 1 Link to comment Share on other sites More sharing options...
Sheyna Posted February 18, 2018 Share Posted February 18, 2018 I also have i3 380M in my Medion laptop. SMBIOS - MacBook Pro 6.1 For me 17.3 "display with 1600x900 (Alternate LW1). Everything works fine in Yosemite and High Sierra. Disable Nvidia (optimus) in bios or disable it in the DSDT or Bootflag -nv_disable = 1 no natit.kext, no EDID injection here All kext are too big for upload. Each 4 Kext from here and my Framebuffer kext from Archiv.zip try (original exchange in S/L/E). 10.12 or 10.13: http://www.insanelymac.com/forum/files/file/208-1st-gen-intel-hd-graphics-kexts/ And for 10.10.5: http://www.insanelymac.com/forum/index.php?app=downloads&module=display§ion=download&do=version_download&id=541&record=11476 Archiv.zip Try this! Thank you very much, with the help of your archive it turned out all the fix!! Link to comment Share on other sites More sharing options...
Recommended Posts